Contact field in outlook access

how to write code for adding contacts field in a GUI(graphical user interface) like outlook web access. Can anyone guide me...Thanks in advance

Hi Suresh,
The following is what I got from documentation of BAPI_CUSTOMER_CREATEFROMDATA1.
One person to be created as a customer:
With the entered personal data, addresses of type 1 (company address), type 2 (address for a person/private address of a contact person), and type 3 (contact partner address) are created simultaneously in Central Address Management (CAM).
If the "Allow Consumer Maintenance" indicator is set, then a consumer is created in SAP R/3. (See also: import parameter PI_CONSUMEREN ).
(a) No consumers to be created:
The entered personal data has a direct influence on the master data, company code data and <b>contact person data. One contact partner record is created for the customer in question.</b> All the master data, company code data, sales area data, tax code data, and reminder data that is not entered is adopted from a reference customer and from the sales area data (sales organization, distribution channel and division - import parameter PI_COPYREFERENCE).
I'm not sure what they are implying. But I think there is some way where the contact person is assigned.
What do you think?
Regards,
Eddie.

Similar Messages

  • ActiveSync Outlook to iPhone contacts field mappings

    With the iPhone 2.0 release, is the mapping of the contact fields between Outlook and iPhone when using over-the-air ActiveSync published anywhere?
    It feels to me that the mappings are different for over-the-air ActiveSync versus in the old way of syncing via iTunes.
    For example, I can not find any "Other Phone" field any longer on the iPhone. The iPhone 1.x releases had this field.

    Here is what we have found through testing. The following lists the names displayed in Outlook 2007 and the corresponding name on the iPhone running 2.0.1. We did not find that any fields from Outoll overwrote any other field on the iPhone, even though the field might have a duplicate name, like "work" and "home". In the case of the Home and Home 2 numbers in Outlook, we ended up with two (2) "home" entries on the iPhone. If there is only a "-" under iPhone it is because it did not sync:
    Outlook iPhone
    ========= =========
    Assistant assistant
    Business work
    Business 2 work
    Business Fax work fax
    Call Back -
    Car car
    Company company main
    Home home
    Home 2 home
    Home Fax home fax
    ISDN -
    Mobile mobile
    Other -
    Other Fax -
    Pager pager
    Primary -
    Radio radio
    Telex -
    TTY/TDD -

  • Where is the Nickname contact field stored in Outl...

    On the N80 you can add a nickname field to a contact which is used by the voice control system instead of the full name.
    If i syncronise then view all the contact fields in Outlook, I can't find a nickname field.
    Where is it stored?
    The same applies to the contact group info.
    My reason for asking is it would be much easier to edit this info on a pc.
    Nick
    Phone List: (in order of appearance)
    Nokia 101 (remember them?), Ericsson 388, Nokia 7110, Ericsson t39, Sony Ericsson p800, Nokia N80, HTC TYTNII, HTC HD2, Nokia Lumia 920

    It's under the details tab when you open the contact.
    Groups options will be under the main tab, at bottom called categoriesMessage Edited by getsurfers on 18-Oct-2006
    09:26 PM
    Orange Handsets : Nokia 51 > NK702 (6130) > 6210 > 6310i (silver)> 7210i > 6230 > 6230i (silver) > N80 (silver) > N95-1
    T-Mobile: N96

  • Accessing the Contact field on a Content Area Programmatically

    I'm implementing some functionality to email the owner of a content area when a new document is submitted for
    approval.
    I have not trouble accessing and manipulating the content areas, folders, regions and items programmatically,
    but when I get to the simple bit of looking up the contact for a content area to send the email I can't find the contact
    property in any view, all of my WWSBR_% views MAILTO_DISPLAY_NAME values are '0'.
    Does anyone have any idea how to access this Contact field (from Edit Folder -> Optional Properties tab) from PL/SQL
    (or Java for that matter) either through a view, table or API call?
    Regards,
    Rob Paterson

    Hi Robert,
    Ur statement states that
    "I have no trouble accessing and manipulating the content areas, folders, regions and items programmatically"
    Can u throw some light on the same by possibly sending some codes to achieve the same.Our requirements are as under:-
    1)When the content area is added with various privileges to a particular users page he needs to click on edit in order to add Item/folder or manage the same.Is it possible to show(either by customizing or programatically) the same links by doing away with the edit link and directly displaying the privileges(i.e. add item,folder properties) when he logs in.
    2)As the situation stands now when a document is uploaded for approval only Portal30 can approve the same though the relevant privileges have been provided for various users.The icon for approval doesnt appear when the content area is added as a portlet.The only way of approval seems to be for portal30 to log in and navigate to the particular content area and click on the same.The items awaiting approval appear with a approve icon wherein he can approve the same.But the same fail to appear when published as a portlet.
    Our project is under tight schedule so any help would be a gr8 help.
    Thanks in advance.
    Regds.
    Kiran.

  • Hi, I need to import contacts from windows outlook to MAC outlook. I need the field mapping document between windows and mac outlook.

    Hi, I need to import contacts from windows outlook to MAC outlook. I need the field mapping document between windows and mac outlook.

    Then I suggest you post your question the Microsoft Mac forums since it's their products you're having trouble with
    http://answers.microsoft.com/en-us/mac

  • Import contacts from old outlook 2013 to new Outlook 2013

    I recently had to get a new computer.  I removed the boot drive from the old computer and installed it as drive F on the new computer. This worked great in recovering my large data files.  However, drive F contains an instance of Outlook 2013
    as does drive C.  How do I copy to or import drive F's contact info to the new Outlook 2013 contacts?  I do not need the old email messages as I already have gotten them from the email service provider.

    Hi
    As per the information and details provided by you, to import contacts from old Outlook 2013 to the new Outlook 2013 please follow these steps: -
    Collect Files from the Old Computer
    First, you need the PST from your old computer. In most cases, they will be in the default location Outlook uses. To quickly access the default PST location outside of
    Outlook, paste this line in Windows Explorer’s address bar:
    %USERPROFILE%\Local Settings\Application Data\Microsoft\Outlook
    Copy the Files to the New Computer
    Now, you will copy the PSTs to the new computer. If you have several PSTs in the folder and are not sure which one is the one with your data, look at the file dates and
    file sizes. If you have 265KB PST files, they are empty and don’t need to be moved.
    Paste the following line into the address bar.
    %USERPROFILE%\Application Data\Microsoft\Outlook
    In this folder you will have the NK2, SRS, XML, outlprnt, and VBA project files.
    Open the AppData Roaming folder using the following command and copy the NK2 file to the folder.
    %APPDATA%\Microsoft\Outlook
    Create a Profile
    After the PST file is on the local drive, type mail in the start search field on the
    Start menu or go to Control Panel, Mail then opens the profile dialog. (If you use the
    Category view, mail is under the Users group; in Win 64-bit, Mail is under 32-bit application.
    Click the Show Profile button.
    Click Add to create a new profile.
    Enter a descriptive name for your profile.
    Enter the name you want to use for your display name, your email address, and your password.
    Add Your Existing Data File (PST) to the Profile
    If you have an Outlook data file PST, and you want to use with your new profile, then please follow these steps: -
    Select the newly created profile, then click Properties.
    Click Data files button to open Account Setting dialog to the Data files tab.
    Click Add then browse to your existing PST file.
    If the PST is a native Outlook 2003/2007 file type, choose the top entry for the Outlook Personal File. Click Ok.
    Select your existing PST file.
    You can enter a friendly name or just click OK to return the Account Settings dialog.
    Click the Sets as Default button. Select the PST Outlook created when it created the profile and click Remove. If you want, click Open folder to find and deletes this PST.
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G

  • OVI Contacts sync with Outlook

    Hi,
    Is there a way to import my contacts entries from Outlook to the OVI application?  I tried several times but it only works the opposite way round.
    thanks,
    stefan

    I decided to try the latest PC Suite 7.1.18.0, same problem. Given that both Nokia suites use pretty much the same underlying PCSync utility, I suspect it was a glitch between PCSync and Outlook 2007 and the way the contacts are flagged/timestamped as you upgrade the versions of Outlook AND PCSync.
    Initially I had synced my N78 contacts with the Switch tool from my E50. On the PC side, I upgraded from an older Outlook to Outlook 2007 AND to the new nokia suites. Seems that changing both software pieces at the same time is a no-no.
    Manual merge (applies when you have few contacts - 150 in my case):
    1. Create a new contacts folder on Outlook (say DummyContacts) and sync into it (one way) all your mobile contacts.
    2. Then on Outlook 2007, copy & paste the contacts from DummyContacts into your primary Contacts folder. Make sure that "duplicate contact detection" is on before you cut & paste. Outlook will take you thru all the contacts that were updated on both sides, so that you can verify the conflicts. The notes field is appended to, so you'll have to edit any contacts with notes after the copy/paste.
    3. Erase all contacts from your mobile, sync into it (one way) the contacts from Outlook.
    After that, the 2-way sync seems to work, both with Ovi and PC suites.

  • Contact fields mapped to NOKIA 6230i

    What version of Windows is being used? Windows XP
    What Service Pack is installed? SP2
    What version of PC Suite is installed? 6.82.22
    What is the connection method, cable, bluetooth or IR : IR
    General Outlook synchronisation question...
    I was used to working with the Siemens CX75 so I can only speak of how it was done there.
    In general I'm missing the following functionality. Which fields in Outlook contact objects are mapped to which Nokia phone fields.
    Some contacts are personal, business, friends, VIP, customers etc... It is very nice to have some personalized ringing tone when somebody who belongs to a certain group calls. In the past with my Siemens phone I had the possibility to map the Outlook COMPANY field to a GROUP field in my phone. If I filled out OFFICE in the company field of my Outlook contacts, my phone records could immediately map that contact to the GROUP OFFICE with all personalized group settings applied.
    How can I do this with my Nokia phone? It can't be that I have to adapt this in my phone each time I add a new contact to my Outlook contact folder... there has to exist some automated way?
    If somebody knows a direct or indirect automatic way to map an Outlook Contact item to a Nokia phone GROUP id it would be a great help.

    They also sometimes appear with a dash or minus sign infront of them.

  • Cannot save contact changes in outlook, always reverts back to what it was before.

    Cannot save contact changes in outlook, always reverts back to what it was
    before. 

    Hi
    As per the information and details provided by you, to save the all contacts in Outlook, please follow these steps: -
    By default, when you double-click on a contact in Outlook, the new
    Contact Card displays for that contact. The Contact Card does not contain all the fields from the full contact editing window that opens when you create a new contact.
    The
    Contact Card also displays by default when you search for a contact. You can still open the full contact editing window when editing a contact or when searching for a contact. To switch to your
    Contact folder, click the People link at the bottom of the
    Outlook window or press Ctrl+3.
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G

  • Trying to get my contact list from Outlook Express to fly over to my new iPAD. Appreciate any suggestions.

    Trying to get my contact list from Outlook Express to fly over to my new iPAD.  Will appreciate any suggestions.

    Outlook Express accesses an address book app called Windoze Contacts for contact info, which the iPad supports syncing contacts with. This is selected under the Info tab for your iPad sync preferences with iTunes.

  • Restrict Outlook Access Only To Domain Joined PCs?

    We have contractors that use their employers laptops to access various LAN resources on our network such as access to shared network drives, printers, Remote Desktop and access to our Intranet sites.  They have mailboxes on our Exchange servers and
    we would like their mailbox access to be restricted to EAS and OWA, not Outlook unless they are using one of our domain-joined computers.  
    The main reason for this is to restrict these users from downloading their mailbox contents into into a personal folder.  We can create PST restrictions on our domain-joined PCs via group policy, but these policies would not apply to computers not joined
    to our domain.
    Of course we would also like to prevent Outlook access to their mail from their home PCs that they may have installed Outlook on, but we still need seamless remote access to Outlook on domain-joined laptops used remotely.
    How can this be done?

    PS -- Andy are you going to MEC ?
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
    I will be there will bells on!
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • How do I fix? Outlook contacts are scrambled/missing and all my contact groups in Outlook have been deleted.

    After I installed iOS7 to my iPod 2 and signed up for iCloud, my Outlook contacts are scrambled/missing and all my contact groups in Outlook have been deleted.

    if you don't want your yahoo contacts, go to settings - mail - yahoo - then turn off the contacts

  • How can I copy iCloud calendar and contact back to Outlook personal folder?

    After I install iCloud control panel for Windows 7 and turn on, it copied everything calendar and contact into iCloud and delete everything from Outlook Personal Folder.   I DONT WANT THIS!!!     How can I copy iCloud calendar and contact back to Outlook personal folder?

    Hi
    If you go to the web site of iCloud and then to contacts there is a button left bottom where you can export your contacts as cvs files and reimport them in outlook

  • How to auto-populate the Contact field from a Custom Object

    Hi,
    I am working on a project where the Contact record is the main focus. I have setup the Contact record as having a one-to-many relationship with CO4. From the Contact Details page I can click on the New button in the Related Record section for CO4 and the Contact from the Details page is auto-populated (which is what I want). I then enter the data into CO4 and click on Save so that the record is displayed in the Related Record section, and then I click into it so that I'm now on the CO4 Details page.
    My page layout for CO4 has both Activities and Service Requests as related records, and the page layouts for both of these include the CO4 field and the Contact field. When I click on New for either of these record types, the CO4 field is populated from the previous record but the Contact is not. I realize this is because there is a one-to-many relationship between CO4 and the Activity/SR, but is there any way to also pull over the value in the Contact field?
    I also tried this using CO1 which does have a many-to-many relationship (if I understand it correctly), but the Contact field is still not pulling over. Is there a way to make this happen?
    Thanks!

    This functionality is not available at this time. I would recommend that you submit a enhancement request to customer care.

  • I have almost 1200 contacts in my Outlook, all of which were assigned to a Category, so I could look people up by that Category. Almost 900 of the Category assignments are now blank. Does anyone know how to assign a contact to a group on the iPhone?

    I have almost 1200 contacts in my Outlook, all of which were assigned to a Category, so I could look people up by that Category. Almost 900 of the Category assignments are now blank. I am a recent iPhone user. When I had my BlackBerry, you could see or assign the Category in each contact. I don't see that when I go to "edit" in a contact. I don't want to go through all my contacts and reassign the Category, and then have them wiped out again. Does anyone know how to fix this problem?

    I'm sorry to hear that.
    I'm not affiliated w/ the developer, just a happy user that gave up fighting the apple podcast app a while ago.  I used to have a bunch of smart playlists in itunes for my podcasts, and come home every day and pathologically synced my phone as soon as I walked in the door, and again before I walked out the door in the morning.
    Since my wife was doing this too, we were fighting over who's turn it was to sync their phone.
    Since I've switched to Downcast, I no longer worry about syncing my phone to itunes at all.  I can go weeks between syncs.
    Setup a "playlist" in downcast (ex., "Commute") and add podcasts to that playlist.  Add another playlist ("walk" or "workout") and add different podcasts to that one. 
    Set podcast priorities on a per-feed basis (ex., high priority for some daily news feeds, medium priority for some favorite podcasts, lower priority for other stuff).  Downcast will play the things in the priority you specify, and within that priority, it will play in date order (oldest to newest).
    Allegedly, it will also sync your play status to other devices, although that is not a feature I currently use and can't vouch for.  It uses apple's iCloud APIs, so to some extent may be limited by what Apple's APIs can do.

Maybe you are looking for

  • Error in WBS element while doing the purchase requisition

    Dear All, While doing the purchase requisition in ps the error is : Item 010 WBS element IN05-PR09-16 . 04 budget exceeded. Kindly parovide any solution. Best Regards, Venkat.

  • Satellite Z830-10M speakers turn off when lid is closed

    Hi, I am running a Z830-10M with an external monitor. I want to close the laptop lid but use the internal speakers, but when I close the lid, the speakers stop sounding! How do I fix this? Thanks.

  • Finding tables with their short descriptions or finding short descriptions

    Is there any Tcode at whose screen I can find the short explanation / description of the tables (for example short description for VBAK: Sales Document - Header Data). Also is there any Tcode at whose screen I can make search with keywords for findin

  • Development Team: CLEANUP utility, please.

    In light of various [albeit minor but]frustrating problems, with multiple installs of various products, producing multiple instances of same services, with multiple copies of same software installed in various directories, with multiple ora's, net's,

  • Manually change column to edit

    I am placing a SQL Query report on my form. I can not use a tabular form wizard because it will only open with a new page. Under report attributes, how do I make a column editable. For example, I have a check under Edit for a [row selector] column wh