Contact list not showing up after upgrade to iOS5

Just upgraded to iOS5 now my contact list is blank but the contacts still show up on incoming calls and text messages. I have the iPhone4 and yes I have reset the phone. Any clue how to get them to list again in the contact area? Thanks for any help!

My contacts were still in place after upgrading to 5, but I could not get into them. Clicking on a name would just freeze the Address Book. Some other thread here suggested the "soft reset", holding down the Home and Power buttons at the same time and power cycling the phone. That solved the problem for me.

Similar Messages

Contact addresses not showing up after upgrading to ios 7

Contact addresses not showing up after upgrading to ios 7

Contact addresses not showing up after upgrading to ios 7

Contact list not show after migration Exchange 2007 to 2010

Hello.
I have a old infraestructure with exchange 2007 and new organizacion with exchnage 2010
If I migrate a mailbox from 2007 to 2010 I can open the mailbox on 2010 without problems,
From owa works correct active sync and outlook work correct, I can send a receive mails but, from outlook client I can not see the Global Address list.
Step by step:
User with mailbox over exchange 2007.
Outlook, owa active sync.. all is working fine and I can see the Global Addres list from owa and from outlook.
Move mailbox from 2007 to 2010
Completed ok without errors
The user mailbox on 2010 working fine, I can access by owa by outlook and active sync and from owa I can see the Global Addres list but from outlook I can not see the GAL.
I've tried diferents outlook versions: 2003 2007 and 2010 but I can not see the GAL
If I try to download de GAL from Outlook I see outlook download the correct list and complete ok without erros but not show on outlook.
I don't know why..
Exchange 2007 with sp3 and 2010 with sp3 too.
Any idea how could resolve this problem?
Thanks in advance¡

Hi
Did you migrate your address list or create a new one? Move-OfflineAddressBook "Default Offline Address Book" -Server <your Exchange 2010 server>
Get-OfflineAddressBook | fl *server*
Set-OfflineAddressBook "\Default Offline Address Book" -VirtualDirectories "your exchange server\OAB (Default Web Site)"

Texts are not showing up after upgrading to version 11

Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
Before (version 10.3.183.7...)
After (version 11.0.1.152...)
The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
You will see the changes with Flash player version 11, and everything working fine with older versions.
I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

This is a known issue and we have a fix for this in our next release. Thanks for posting.

SkyDrive photos & contact list not showing in FF13

I have had FF for years & have been happy with it always until FF13 which has caused problems with my use of SkyDrive to share my photos. I have used SkyDrive for a long time too & never had issues until the recent FF13 update. I can use SKYDrive without any problems if I use IE as my browser but in FF13 some photos will not show in a slideshow unless you right-click & choose view original then a separate window opens for that one photo. It is random because if you start slideshow over it may be totally different photo(s) that will not show. Other thing that started since FF updated to 13 is that when I try to 'share' the slideshow my hotmail contacts list will no longer load although it will load if I switch to IE. This is clearly a problem related to FF13 since there is no problem in IE. I prefer to use FF but need it to work for SkyDrive. Please is there a patch for this or can you tell me what to do.

This is way too technical for me. I have no idea what that is nor do I feel comfortable fiddling with things I don't know anything about.
Thanks for your help but as I said in my last post I will use IE for sharing SkyDrive until the FF fix comes out.

Mail.app time machine backup not showing anything after upgrade.

Hi,
I have gone from Snow Leopard to Mountain Lion, and I have a concern that my Time Machine backup now does not show any of my emails since the upgrade.
Is this by design or has something more sinister occured?
Gavin.

Hi,
No, thats the point the only email visible is from after the upgrade a week ago.
My emails on this computer go back over a year, but I cannot seem to see them.
Gavin.

External drive does not show up after upgrade to 10.8.3

My external drive that has my Time Machine files do not show up on the display after I upgraded to 10.8.3

This did not work. I finally reinstalled OS X. Now some drives will show up. I still have oe that will not. I have two laptops and all of the drives show up on the other machine. My last problem drive is a seagate 1tb.
Right now I have too much other stuff going on to worry about this so I have put it on the back burner.
sig thanks for trying to help.

SXMB_MONI does not show payload after upgrade to SP15

Hi there,
We have installed SP15 in our system, everything seems to be working OK with exception of the SXMB_MONI which now does not show the Payload in the SOAP output/response.
Does anyone know if this is a know bug/functionality of SP15?
Thanks,
Roberto

The other OSS note:
SAP Note Number: 917885
XI: Attachments werden im Message-Monitoring nicht angezeigt
Version: 1, Note Language: EN, Released on: 01/27/2006
Symptom
An XML message contains attachments with mime types different from application/xml. When clicking on the attachments in Message-Monitoring for that message, the attachments cannot be displayed!
Error message is: "Format of the document cannot be displayed"
Other terms
SXI_MONITOR, SXMB_MONI, Runtime Workbench, XI, RWB, Message Display Tool, MDT
Reason and Prerequisites
Before displaying an attachment, Message Monitoring checks the mime type of the message with a list of supported types. Since there are several mime types for some applications, like powerpoint or excel, the check is not exhaustive.
Solution
The attached correction instruction adds additional mimetypes for powerpoint, excel, and word. The patch is included in SP17 for NW04 and SP7 for NW04s.
Actually both of these notes don't exactly indicate that the issue will be fixed in terms of the payload. We are going to apply it and see if it fixes the issue. I will update this forum when i try it out.
Regards,
Jay

Siri not showing up after upgrade to IOS 6

I have an IPAD 3. I updated to IOS last night. But I am not seeing Siri anywhere. Even Settings>General>Siri is not showing. I am wondering if I made an error in installing as another Ipad is showing Siri correctly. How do I fix this?

Rang Apple support. They asked me to do a full restore. After an hour of effort, it promptly restored my backed up settings without giving a chance to choose SIRI again. I could have set-it up as a new Ipad but then all my data would have been lost.
Think this is a bug. Hope Apple fix is sometime soon.

Keywords not showing up after upgrade to LR2

Hello everybody,
I've got a big problem within lightroom (2.6).
In my keyword list, when i select a keyword (to see the photos with that keyword) all my photos in the catalog pops up.
For example there is a keyword with 4 photos in it. When i click it all my photos in the catalog pop up. (I do click on the arrow next to the keyword to try to show it up)
Then the catalog automaticly selects a random photo. The catalog was originally made in lightroom 1.1
To show what i'm talking about here a screenshot:
As you can see i selected the word Beechcraft, with 1 photo in it. As a result it shows my entire catalog.
I'm using Windows 7 (64-Bit). All together i think it's pretty odd since lightroom 1.1 did not have this problem. (unfortunatly 1.1 jams after being used for a while (even with compatible mode on XP SP2 and with run as admin enabled)
Anybody has this problem as well? And does anyone knows how to solve this problem?
Thanks in Advance,
Stefan

Thanks again for the fast reply! Made me a bit more clear about what might be wrong.
I've gave your sollution a shot....unfortunatly it did not work. What i did find out during that test is that the keyword Beechcraft itself doesnt work, but the keywords in it do. Made a screenshot of what i mean:
Could this mean the keyword beechcraft is corrupt?
I've deleted the keyword as well, and made a new keyword named Beechcraft, but that did not work. If it's under a different keyword (for example Beech) it does work. This can be done with this keyword, but there's not always some same kind of keyword for a photograph.
And if the keyword is corrupted, is theres a solution for that?
Thanks in advance,
Stefan

Preview not showing photos after upgrade to 10.5.3

Hi
Since I upgraded to OS 10.5.3, my Preview program will open and seems to run properly...
Except that I cannot actually see the photo that is open. The Preview toolbar shows and I can select the various options. But there is no window with the photo in it.
Any clues?
I already deleted the related plist files in User Library/Preferences. This did not change a thing.
Thank you for your thoughts.
Dominique =)

Maybe deleting those plist files did work in the end - as this is the only thing I attempted to do to solve the issue, since I upgraded to 10.5.3 2 days ago.
It took a few minutes, but all of a sudden, my Preview application was working as normal.
=)

MSE Not Showing Clients After Upgrade to 7.6.100.0

I've upgraded our 5508 WLC's to ver 7.6.100.0. I've also upgraded our NCS to 2.0, and our MSE to 7.6.100.0. I now can no longer see clients on the MSE map for our sites. I've added the WLC to the MSE syncronization. When I select "show clients" it says 0 of 0 found. I know I have clients connected, since I can see them in the WLC. Is this a licensing issue? Thanks for your help!

Make sure that NMSP is up.
http://www.cisco.com/en/US/products/ps9742/products_tech_note09186a0080bb497f.shtml#add-va-ncs
On WLC console, use the show auth-list command.
The following example shows from WLC console that there is no location server available:
In order to manually add the MSE and establish a NMSP connection to WLC, complete these steps:
On the MSE console, run the cmdshell command, and then the show server-auth-info command.
This example shows the MAC address and the keyhash to be used for adding to the WLC.
Run the config auth-list add ssc command, and then run the show auth-list.
This example shows that the MSE was added to the WLC (manually).
On the NCS, confirm that the NMSP connection shows Active.
Sent from Cisco Technical Support iPhone App

Contacts list not showing

I have 191 contacts in my personal list. But something happened and now when I click on the bookmarks icon it takes me to add a contact and I cannot access my contacts. HEL! lol thanks

Bookmarks icon takes you to add a contact? Strange.
Bookmarks are located in your browser.
Do this... With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
Now, once back up and running, go to your Address Book, and open it. See your contacts?
OH, and Roll Tide.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Some mail messages not showing content after upgrade to Yosemite

I have just upgraded my system software to Yosemite and Have found that some of my mail messages are not displaying their content. I have closed and re-opened Mail and also taken all mailboxes offline and back online but the problem still persists.
Does anyone have a solution to this problem?

Hi Illaass,
I've already rebuilt the mailbox several times. I have run disk utility, started my masc in 'safe mode', reset the PRAM and finally re-installed Yosemite again. This didn't solve the problem. I started my mac in 'safe mode' one more time today and than restarted my mac and the problem appears to have been sorted. However, I'm not sure if the problem will re-occur if I shut down my mac tonight and restart in the morning1

Third party filters such as Topaz Labs not showing up after upgrade to CC 2014

Has anyone noticed if their third party filters have been missing since upgrading to Photoshop CC 2014. I have lost all mine :-(

Your 3rd party plug-ins are not automatically migrated to the new version.
Check to see if the makers offer updated installers, and install them into Photoshop CC (2014).
-Noel

Contact list not showing up after upgrade to iOS5

Similar Messages

Maybe you are looking for