Contact relationship to person

Hi all,
I'm new to oracle,so correct me if i'm wrong..
I've created a party (Party A) using the HZ_PARTY_V2PUB API, to be a contact to a different party (Party B).
Next I created a contact point for Party A using the HZ_CONTACT_POINT_V2PUB API.
So, for Party A to be a contact within a Service Request of Party B, I use the CS_SERVICEREQUEST_PUB API which have the Contacts Table (cs_servicerequest_pub.contacts_table)
l_contacts_tab (1).party_id := 89765 ; --Party A party_id
l_contacts_tab (1).contact_point_id := 73154; --Party A contact_point_id
Error message:
API Programming Error (CS_ServiceRequest_UTIL.Validate_Person_Relationship): The value "89765" for parameter p_party_id is invalid.
Should I create the relationship between Party A and Party B before it can become a contact?
What is the API to create the relationship between 2 parties?
Please help..
P.S.
I change the the contact_point_id to Party B's and the same error message appeared...

Hi,
I have gone through your query. The question here is bit misleading. You have mentioned that when you delete the contact person relationship of a Sold to party, relationship to another contact person is deleted. No two contact persons can be identical in the system. Whenever you create a new BP in the CRM system, every one are unique in its own way with a New GUID and New BP number assigned to them.
Even though they can remain as duplicate, but 2 contact persons cannot be identical which will lead to a scenario like you have mentioned here. In my opinion this cannot occur. If you elaborate further i can help you out.
I hope this helps.
Regards,
Venkat

Similar Messages

  • How to delete a Contact Relationship in BADI

    Hi,
    I have a requirement where I need to delete Contact Person's relationship -  BUR001 with the Account he is associated with. This should be done in a BADI implementation when the user changes the status of the Contact Person and clicks on SAVE on WebUI.
    Initially I tried to delete the Contact Person relationship using the FM: BAPI_BUPR_RELATIONSHIP_DELETE which actually resulted in a DUMP error on WebUI in runtime because that FM was trying to interrupt a COMMIT. So I tried to find few MAINTAIN FMs which can solve this issue , as COMMIT anyways happens later internally.
    I found this FM: BUB_BUPA_RELATION_MODIFY which takes BUT050 structure and the action as input. Below is the Code snippet of the FM i used:
    CALL FUNCTION 'BUB_BUPA_RELATION_MODIFY'
       EXPORTING
                 is_but050 = ls_but050
                 iv_aktyp   = '06'.            " 06 means delete action
    Now the Contact has been successfully saved but the Contact Relationship is not deleted.
    Please let me know if anyone has got a solution for this.
    Thanks,
    San

    Any idea on this query?

  • Contact relationship report.. contacts not appearing

    hi,
    hope you guys can help me out with this. my customer has [contact relationship] information in the contact page. there are 2 relationships, [Leader] & [Follower]. where 1 leader can have many followers and vice versa.
    i need to come up with a report on the number of members a leader has.
    the problem im facing is that when i create a report to list all the [Related Contacts] . i get all of my data. but when i add the [Contact Name] the person is related to only a few data shows up.
    This is how my report should look like.
    {Contact Name} {Contact Relationship} {Related Contact} {Reverse Contact Relationship}
    John Doe Leader Jane Doe Follower
    im not sure why the data is not appearing. any suggestions?
    thanks in advance

    Hi,
    I am having the similar problem for getting the report from Contact Relationships.
    I was trying to create the report from "Contact Relationships" subject area. The column I used are
    <Contact.Contact ID> | <Contact.Full Name> | <Related Contact.Relationship> | <Related Contact.Contact ID> | <Related Contact.Full Name>
    The result suppose to return more than thousand rows, but it return 81 rows only.
    How to get some expert advices out there.
    Thanks in advance.

  • Lync 2013 client - Set people to "Blocked Contacts" relationship by default?

    We are in the process of implementing Lync Server 2013 (on-premises). We have already implemented one front end pool and one edge pool and successfully tested the basic functionality.  Now we are moving on to configuring the various policies based
    on our requirements. One requirement that has come late in the planning is to prevent people from receiving IMs unless they explicitly allow people to IM them and to have the ability to whitelist IMs from people on an individual basis.  This is a feature
    that was submitted as a requirement by way of our IT HelpDesk manager.
    From what I gather, this could be accomplished if someone had the ability to set the default to the "Blocked Contacts" relationship for everyone instead of "Colleagues".  In my research on how to set that as the default, I found
    a setting "ShowManagePrivacyRelationship" in Set-CsClientPolicy.  I created a new per-user client policy called "TEST" and applied it to myself.  Then I set ShowManagePrivacyRelationShip to $true via PowerShell on the TEST policy. 
    However, even hours after making the change and signing out and back into the Lync 2013 client, I still don't see any change in functionality or new options.
    Now, if I instead sign in with the Lync 2010 client, I can indeed see a "Manage Privacy Relationships" option in a drop-down near the right side of the client which takes me to a view where I can see and move "People in my company" and
    "People in domains connected to my company" pseudo-contacts from the "Colleagues" relationship to "Blocked Contacts" and this accomplishes exactly what we want to do.
    Where can I find the "Manage Privacy Relationship" setting in Lync 2013 client?  If there is no setting called that, how can I accomplish what I am trying to do using Lync 2013?
    I would rather not use the Lync 2010 client, as our HelpDesk technicians all use Windows 8.1 and Office 2013.

    David:
    Yes, I have all of those relationships categories in Lync 2013.  What I am missing is the ability to set the rest of the organization to
    Blocked Contacts by default.  I can do this with the Lync 2010 client using the same user login and the same Lync Server 2013 environment.
    The following image demonstrates the location of the Manage Privacy Relationships option I would like to leverage in Lync 2013.  The image is of the Lync 2010 client.
    https://www.dropbox.com/s/i0g83i9su9e5zox/Manage_Privacy_Relationships.png
    If I click that Manage Privacy Relationships option, I end up on the following screen.  Note that there is a
    People in my company object under Colleagues.
    https://www.dropbox.com/s/kkatgtoexea7evt/Default_Privacy_Relationships.png
    I am able to move that People in my company object to another relationship option.  I moved it to
    Blocked Contacts, as you can see below.
    https://www.dropbox.com/s/956kw0ih15uksgr/People_In_Company_Blocked.png
    As you can see in the following image, after making this change if I do not have a person on my Contacts list, they are unable to IM me.  As you can see in my Lync 2013 client relationships list, no one is in my
    Blocked Contacts list yet the Lync Test Account is being blocked due to the fact that I put People in my company there and haven't added them to my Contacts list.
    https://www.dropbox.com/s/cue09wjj8tidbau/Blocked.png
    After adding the Lync Test Account to my Contacts list, the Lync Test Account is able to IM me.
    https://www.dropbox.com/s/nalju5ia980lc30/Unblocked.png
    I hope these images help make clear that there seems to be a capability present in the Lync 2010 client that I am unable to locate in the Lync 2013 client.  I can't find this
    Manage Private Relationships option anywhere in the Lync 2013 client or any other option that lets me see those People in my company and People in domains connected with my company objects.
    With regards to the EnablePrivacyMode option, I am already aware of it and that is not what we are looking for.

  • Workaddress in contact relationship person2person

    Hi together,
    we are working on the go-live for the CRM 7.0 EhP2. I got an issue, which is not
    clearly assigned to be a technical  or a process problem.
    If a contact relationship between 2 persons exists , the workaddress at the contact
    persons view is not editable.
    I debugged and found some hints in code which lead me to the opinion, that
    a workaddress in person to person relationships does not make sense. So these
    fields are deactivated trough coding not through customizing.
    Am i right? I can't find any ressources, which confirm my way of thinking.
    Thank you in advance for useful help!
    regards and a nice Weekend, Jens

    Hi Jens,
    You have my vote. And to support this idea, there are some SAP notes that here and there talks about that scenario impossibility, like note 1484558 that states: "This occurs during the check of work address duplicates which is not required for a person to person contact person relationship, since the work address assignment is not possible for this scenario."
    Kind regards and have a nice weekend!
    Garcia

  • How to contact a live person about resetting my security questions. The link to send email doesn't work.

    I need to contact a live person about resetting my security questions.  The link to send an email, doesn't send an email even though the email address it's supposed to be sent to is verified and works. (It can receive other email).

    Hello DogTrainer63,
    Click on the first link below to find the number that you need to contact Apple to help sort you out. I have also provided an article that may help if you have not received that email to reset the questions. 
    Contact Apple for support and service
    http://support.apple.com/en-us/HT201232
    If you didn't receive your Apple ID verification or reset email
    http://support.apple.com/en-us/HT201455
    Regards,
    -Norm G. 

  • Where are contacts in my Personal Addresses file and why do my email addresses differ than the ones I reinstalled in my Personal Address file?

    I lost my Personal Address file in Cyber Space and all of my contacts. I reinstalled my contact information into a new Personal Address file and want to make sure I save a copy of the file in case the file gets lost again.
    Also, when I created a new email and typed in the first few letters of the address contact, it automatically opened up the persons contact but in a form that is different than what I entered into my personal address book and is not able to be sent. It showed the email address as, <" m*****"@hotmail.com> . There is the symbol " in front of their email name and in front of the @ symbol in the email address, which is not what I installed in my personal address book. I had these kind of emails in the Collected Addresses file which I'm guessing caused my problem to start with. I do not need to have a Collected Address file. Somehow I must have hit the wrong keyboard key and created this problem. I do not want to uninstall and reinstall Thunderbird in fear of loosing all of my contacts again. I spent two days reinstalling my contacts in the Personal Address file and even then information is missing. So now I have to contact everyone and request phone numbers and home addresses and install all of them again.
    As a final note, I deleted all of the addresses in the Collected Addresses file. Can you tell me where they may be saved at so I can make sure they are gone and not interfering with my new Address Book and function of my email account?

    The Personal Address Book is stored in your local disk drive; "cyber space" doesn't come into it.
    Was it just the Address Book that was lost? Did your email account settings remain intact? Or did you lose the entire profile?
    All of your data is stored in a set of files known as the profile. It's unusual for just one element of it to go missing. Any query about saving or protecting data will generally be answered by guiding you to backup your entire profile.
    https://support.mozilla.org/en-US/kb/profiles-tb
    http://kb.mozillazine.org/Files_and_folders_in_the_profile_-_Thunderbird
    It's possible to single out address book files for independent backup, but you'll need to surgically dissect them from your profile and know where to insert them in order to restore them.
    PAB → abook.mab
    CA → history.mab
    user defined address books → abook-''n''.mab where ''n'' is a number
    A safer option for a partial backup might be to export the relevant address books.
    In the Address Book, select an address book, then go to '''Tools|Export''', enter where you want the exported addresses to go. Repeat for each address book you want to preserve.
    Thunderbird likes the LDIF file format which exports and imports cleanly. The main alternative, CSV, is good for transporting data to or from other address books, but you'll have to take care to get the imported data to feed into the correct data fields. For instance, many users find that their email addresses are posted into the Nickname field. Have you checked your address books to confirm that all the data are where they should be?
    The Collected Addresses book, IMHO is like the lint filter in a tumble dryer. Best way to use it is to keep it empty; periodically examine it, move useful addresses to a proper address book and dispose of the cruft you don't need. If you let it grow, you'll have trouble finding the really useful addresses in amongst all the chaff.
    There is an add-on that might recover a deleted address book, but I can't recall which one it is. Hopefully someone else will chip in?
    sfhowes? ;-)

  • Is there a way to contact a specific person on here?

    Is there a way to contact a specific person on here?
    I am having unbelievable problems & one person is trying to help me. One way is to refer me to another's post/site.
    Is there any way that I can directly contact that person to get the "straight" of it all? I am "ignorant" of many of the names & processes required to "fix my macbook" & it is multiple problems that won't allow me to do what is on his page.
    Thank you.

    HT3275 TIME MACHINE GONE... EARLIER, OTHER OS APPS NOT THERE, DAMAGED MAC from what??
    I am new & totally going at this blindly!
    BDAqua has been trying to help me & sent me to a website by Phil Stokes, but I don't understand it... & he has his own website for help now which I signed up for, but they must APPROVE ME.
    I think that I will be able to contact the guy who wrote the "How to Un-Install MacKeeper, but my issues are bigger than that.
    I am sorry that the above is so long when you get to it, but I am having so many problems & cannot find any resolution.
    Stupidly... Ignorantly downloaded MacKeeper, which everyone says to UN-INSTALL ASAP....  but I can't seem to do that in that I have other issues & don't want to lose all of my info.
    TIme Machine just recently said, "NOT configured", so can't back up my info. I have tried everything that I know to do. It is in the top & in my Applications, but when I turn it ON, it goes to Time Capsule, which I don't have. I have 2 external HD's, MyBooks. One I use only for Time Machine. I plug it in & hear & feel it running but it does not show up on my desktop & is NOT connected to my Time Machine. When I hit "ON", it opens up an EMPTY window to set up Time Capsule, which I do NOT have... nothing listed in the window! When I close that window, Time Machine goes to "OFF" position.
    Also, get "Browse over Time Machine Disks" when I click the icon at the top---> EMPTY WINDOW!
    Another option was to go to Finder-->Applications-->Disk Utility--> and External HD should show up in the upper left hand corner under the Hard disk icons... & it DID. Changed USB cord( From 2nd MyBook that I bought for STORAGE... now NOT there??.....Just changed power cord from 2nd to 1st & it is there again.
    The first time that I did that, it was there, but all the repair/check/permission options were greyed out, so could not do anything. Now they are there, so will try to see what happens. Trying Disk Repair. Will let you know later how that turns out. (I am pretty sure, based on all my efforts over the past weeks that nothing will be fixed.
    OS Disk still showing up in the left hand corner from the other day & it has been ejected & removed, NOT there? Why would that be?
    Hope you can be of some help. I avoid my Mac for days, feeling like I am going into the "black place" again, so if I don't reply in a timely manner, know that there are reasons. I am overwhelmed with too many issues to deal with & not a sole to help me.

  • I have purchased a iphone 4s second hand used and when i tried to update its software, it is asking for apple id . i dont have contact with the person to whom i have purchased this device now what should i do

    i have purchased a iphone 4s second hand used and when i tried to update its software, it is asking for apple id . i dont have contact with the person to whom i have purchased this device now what should i do

    You can't do anything. You have encountered the activation lock. Unless you have some sort of contact with the previous owner you have bought a very expensive paper weight.
    You can find out more about activation lock from Apple's site here: Find My iPhone Activation Lock - Apple Support

  • What file format is best to import a load of contacts from my work MS Outlook contacts to my personal Icloud contacts?

    What file format is best to import a load of contacts from my work MS Outlook contacts to my personal Icloud contacts?

    Welcome to the Apple Community Sally.
    vcf.

  • How do we contact a real person regarding billing errors?

    How do we contact a real person regarding billing errors on our itunes account?

    You can contact iTunes support via email via this page (I'm not aware of any phone support for iTunes) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Just updated to iOS7, lost my contact list and personal apps.

    just updated to iOS7, lost my contact list and personal apps.  how do I get them back?

    i lost it too unfortunetlly , i think it is becouse  the defect in the  wireless connection during the update process, i lost verey important numbers  , my iphone4 is still not accept any additional contact number i add , it is frustrating situation. i will approciate any help  

  • Per Contact Relationships

    Hi,
    Is there a published api to create/update employee contacts ? I did some research but i couldn't find. Or do we create this contact link create person api ?
    I need to create employee contacts with procedure.
    Thanks.

    Use the API - hr_contact_rel_api
    procedures within the API -
    create_contact
    update_contact_relationship
    delete_contact_relationship
    Cheers,
    VB

  • Keeping business contacts separate from personal contacts

    Dear All,
    I'm sure this is not an uncommon situation and I bet that thousands if not millions of individuals have this same or similar problem. 
    I am self employed and use my MacBook Pro for both work and personal purposes.
    I use "Gmail" for my personal email and I have a separate "Google Apps" account (using my own domain) that handles my business emails.
    I use Apple's Mail application for both email accounts mentioned above (setup using IMAP settings)
    For various and obvious reasons I'd like to keep my business contacts separate from my personal ones.
    I searched for ways to have two separate address books but it doesn't seem to be possible.
    I read about Plaxo but I don't want to pay a yearly/monthly fee.
    I don't want to create a separate user account on my Mac because I'd be switching between them too often throughout the day. That would be annoying.
    Soooo, has anyone come up with any clever workarounds?
    How do you fellow freelancers deal with this?
    I'd appreciate any ideas, tips or workarounds.
    Thanks! – Xavier

    Did anyone end up finding a solution to this problem?
    A complication I find with address books, groups, and even with the trial of Bento that I played with, is that you cannot move individual contacts from the main pool without deleting them altogether. And there is nowhere else to move them to.
    As agodfrin says, it would be great if you could make them invisible. Or, if you could move them to an "infrequently needed" or "private" group so that they no longer appear in the main group. This is most relevant to me because I often add new contacts when out with my iPhone, and they are automatically added to the main list. I then have to go back and find them like needles in a haystack, and there is no way of viewing a chronoligical listing of entries in order of date first entered. I end up searching through the same irrelevant old contacts again and again to find an weed out my numerous recent ones. It's a real time waster when trying to send out marketing materials to relevant people.
    I saw that there was an app previously available which listed contacts chronologically, but it is no longer available. I think we really need to be able to separate our main contact list into different branches.
    I'm flabberghasted that there doesn't seem to be more of a demand for this kind of logical functionality.

  • How to add company name to show up in contact list with person's name on Droid

    I just switched from the Blackberry Storm to the Motorola Droid.  Is there a way to have the company name show up in the contact list under the person's name.  I need that for work.  It syncs up with a program called Act by Sage and my storm used to show both.

    You can edit your contacts, and list the company name under the organization section. However, it will not show up when they call you. You will only be able to see it in your contact list. Hope this helps!

Maybe you are looking for