Contacts list Sim list

Having copied the Address book from my Palm to my Curve 8520, I find it is sharing the folder with the Contacts list from my Sim card. Can I do anything to ensure that the folder always opens to the Sim card list first?

OK...so this post is strictly about wanting to send your contacts to the SIM. That capability is one at a time only. And there's a reason for that.
The BB Address Book is robust, allowing you to have one name with multiple phone numbers and addresses. The SIM phonebook, on the other hand, is much less capable...if, for instance, you have one contact with three phone numbers in your BB Address Book, the SIM phonebook would require three separate entries to contain the same data (with the obvious duplication of the name on three separate records).
So, I must ask...why on earth do you want to send your contacts to your SIM? There are much better methods for moving your contacts from the BB to somewhere else...
Let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

How can I stop my iPhone from synching my contacts and groups lists twice?

How can I stop my iPhone from synching my contacts and groups lists twice....I am using iCloud but am not sure how correct this duplication.

Go into Settings>Mail, Contacts, Calendars. Is this happening at the bottom in the signature section, or in the header of the mail where your email address is? If it is the signature, then go to the Signature area of the Mail settings. If this is in the header, then go to the account in question and edit your account information to include your name instead of Johnny.

In Address Book, cannot assign a contact to a list.

I am unable to assign a new contact to a list in the Address Book. I've entered the contact's info but when I highlight that contact's name, press the Ctrl key and attempt to copy it to a list, nothing happens. There is a plus symbol on the cursor as there is supposed to be when copying but the contact will not copy to a list. I have done this same procedure a hundred times with never a problem until now.

If you have added the contact to an address bookand now you want that contact to appear in that address book's Mailing List:
* Open 'Address Book'
* select the address book with the contact
* locate the contact, left click and hold down to grab
* drag contact to the left and hover over the Mailing List
* release to drop into Mailing List.
see image

If I wish to print Contacts as a list how do I get the list to be alphabetized. All my contacts print but they are not in alpha order.

Sign out

If I wish to print Contacts as a list how do I get the list to be alphabetized. All my contacts print but they are not in alpha order.-cannot find an answer other than use iCloud which did not work.Tried Safari and Firefox.
What to try?

My young kids have ipads and since I updated the software, but they have their own icloud account, predictive text within their messages shows all my contacts from my iphone but the contacts are not listed as their contacts, how do I stop this?

My young kids have ipads and since I updated the software, but they have their own icloud account, predictive text within their messages shows all my contacts from my iphone but the contacts are not listed as their contacts, how do I stop this?

I have deleted the iCloud account under my name on their iPads and replaced with their ones. Apple support said yesterday I needed to click the small 'I' by each name as it came up in the TO box and remove it. After doing rid for each contact under each letter of the alphabet it should remove them from latest contacts. Having done this, although I could not remove groups I had sent, I am not convinced they will not return once I have written a few texts, any ideas?

Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. When I open the contact, I can only see 3 contact names and the rest of 4000 contacts are not listed

Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. However, when I open the contact, I can only see 3 contact names and the rest of 4000 plus contacts are not listed, and it makes you difficult to call through contact

The iPhone remembers information about previous contacts.
Complelely independently, you have a Contacts app with a contacts list. It sounds like your contacts list has 3 names on it. You need to add a few names.

Contact and distrubution list

Good Day ,
Just one question I did migration from exchange 2003 to exchange 2010 I moved mailbox about Contact and distrubution list
is moved automaticly I don't need to do somthing .
Regards
e

You need to upgrade the Distribution list.
Set-DistributionGroup <DL name> -Forceupgrade
The ForceUpgrade parameter suppresses the following confirmation: "To save changes on object <object name>, the object must be upgraded to the current Exchange version. After the upgrade, this object can't be managed by an earlier
version of the Exchange Management Tools. Do you want to continue to upgrade and save the object?" This confirmation occurs when you upgrade a distribution group that was created in Microsoft Exchange Server 2003. You can't manage an Exchange 2003 distribution
group by using the Exchange Management Console until you update the object's version.
Taken from
http://technet.microsoft.com/en-us/library/bb124955(v=exchg.141).aspx
Same with Contacts as well
Set-MailContact <Contact name> -Forceupgrade
http://technet.microsoft.com/en-us/library/aa995950(v=exchg.141).aspx
Now, if you want to perform this on all the Distribution Groups and contacts, you can run the commandlet as below
Get-DistributionGroup -ResultSize Unlimited | Set-DistributionGroup -ForceUpgrade
Get-Mailcontact -ResultSize Unlimited | Set-MailContact -ForceUpgrade

Please: how do I print "Contacts" in a list, in alphabetical order??? Thanks!

Please, how do I print "Contacts" - in a list, in alphabetical order??? Thank you.

Hi.
In Contacts:
1. Click Contacts
2. Click Preferences
3. Show First Name: Before Last Name
4. Sort By: First Name
Now, choose the list you want to print and check if it's the way you want.
Cheers,
JP

A BBM contact was still listed, but I am no longer in his/her contact?

One of my BBM Contact was still listed, but when I was trying to chat with him/her I got error message, "You are no longer on John's contact".
As long as I know, if someone delete you from BBM contact he/she won't appear on your list as well.
What are the possible scenarios of what had happened?
Thank you in advanced.

It could be one of many reasons. Remove your battery while your phone is powered on then replace it. Look once again to see if the contact is still there after that.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

How copy contact to another list? Not move.

How copy contact to another list? Not move.

Same way you do in most applications when using drag and drop. You hold the control key while dragging the contact or file. You will see a plus sign appear to indicate a copy instead of a move. Hold the control key until releasing the contact in the new location.

HT204150 I cloud has deleted the last 200 contacts from my list of 800 contacts.

I cloud has deleted the last 200 contacts from my list of 800 contacts. I lost them from my phone and iMac, but was able to turn off my ipad so it could not erase them from there. After the letter "R" all the contacts are gone. Help? Anyone have a remedy?

change your email passwords.

TS1702 Recently I updated the shopping list/grocery list app that I purchased awhile back.When I try to add an item it kicks me back to the desktop.I have rebooted & reinstalled several times.No success.

Recently I installed the update for the Shopping List/Grocery List app that I purchased awhile back. When I try to add an item to the list it throws me out of the app to the desk top on my ipod touch. I have tried rebooting the device and reinstalling the app several times, Does anyone have any ideas how to get it to work or to go back to the old app before they updated it?

Have you contacted the developer/went to their support site? Maybe it just is not compatible with iOS 6.
You can try what yo have not already tried of the following:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.

Duplicated values when added to list of list

Hey all,
I'm making a list of lists, when I print the values just after adding in the list of list everything seems fine, but when I print that list where I call it it has duplicate value instead of the 2 different that I see when I first print it, I really don't know what's wrong.
I tried 2 different declarations for the list of list but is the same result, I also tried using index to add the list but no change either.
What is wrong? or how should I do it instead.
Thanks in advance
The code is this
public class ReadFile extends Metrics{
    public List loadFile(String filename) throws IOException{//void
        FileInputStream fstream = null;
        ///TRACE POINTS
            List<TracePoint> CharPoints=new ArrayList<TracePoint>();
            List<List> ListaChars = new ArrayList<List>();
            //List<List<TracePoint>> ListaChars = new ArrayList<List<TracePoint>>();
        try {
            fstream = new FileInputStream(filename);//"xy.dat");
            DataInputStream in = new DataInputStream(fstream);
            BufferedReader br = new BufferedReader(new InputStreamReader(in));
            String strLine;
            Normalize norm = new Normalize();
       //Read File Line By Line
            while((strLine = br.readLine())!= null) {
                int INDEX=0;
                ///READING VALUES FROM XY FILE and splittting
                String[] temp = strLine.split(" ");
                ///clear list before reusing it
                CharPoints.clear();
                String[] tempNorm = norm.normalize(temp, 0, 1);
                for (int i = 1 ; i < tempNorm.length ; i=i+2){
                    CharPoints.add(new TracePoint(Float.parseFloat(tempNorm),Float.parseFloat(tempNorm[i+1])));
ListaChars.add(INDEX, CharPoints);
System.out.println(" Charpoints is "+ CharPoints);
System.out.println(" LISTofCHARS is "+ ListaChars);
INDEX++;
//Close the input stream
in.close();
}catch (FileNotFoundException ex) {
Logger.getLogger(ReadFile.class.getName()).log(Level.SEVERE, null, ex);
}finally {
try {
fstream.close();
} catch (IOException ex) {
Logger.getLogger(ReadFile.class.getName()).log(Level.SEVERE, null, ex);
//return CharPoints;
return ListaChars;
public static void main(String args[]) throws IOException{
ReadFile test2 = new ReadFile();
List<List> characters = new ArrayList<List>();
characters = test2.loadFile("xy.dat");
//System.out.println("\ncharacters = " +" "+ characters.get(0));
The result is this, the first look like its copying ok, but when the second is added is duplicated and the first value is not there anymoreCharpoints is [TracePoint: 0.395683, 0.913669, 0.000000, TracePoint: 0.136691, 0.928058, 0.000000, TracePoint: 0.000000, 1.000000, 0.000000]
LISTofCHARS is [[TracePoint: 0.395683, 0.913669, 0.000000, TracePoint: 0.136691, 0.928058, 0.000000, TracePoint: 0.000000, 1.000000, 0.000000]]
Charpoints is [TracePoint: 1.000000, 0.004096, 0.000000, TracePoint: 0.999937, 0.003151, 0.000000, TracePoint: 0.999811, 0.001765, 0.000000, TracePoint: 0.998866, 0.000000, 0.000000]
LISTofCHARS is [[TracePoint: 1.000000, 0.004096, 0.000000, TracePoint: 0.999937, 0.003151, 0.000000, TracePoint: 0.999811, 0.001765, 0.000000, TracePoint: 0.998866, 0.000000, 0.000000], [TracePoint: 1.000000, 0.004096, 0.000000, TracePoint: 0.999937, 0.003151, 0.000000, TracePoint: 0.999811, 0.001765, 0.000000, TracePoint: 0.998866, 0.000000, 0.000000]]
Edited by: mtiv on Oct 24, 2009 6:02 PM

while((strLine = br.readLine())!= null) {
                int INDEX=0;
                INDEX++;
}On each iteration of the while loop, index equals 0. Try moving the variable index outside of the while loop.
List<TracePoint> CharPoints=new ArrayList<TracePoint>();By convention variable names begin with a lower case letter, it is an important practise to live by as I was lead to believe CharPoints was a class at first.
Mel

Show Net Due Date in F110 - Proposal list / Payment list

Dear Gurus,
I would like to ask for help in below issues:
I want to display "Net due date" field in transaction F110 - Proposal list / Payment list (program : RFZALI20) but I only found "Baseline Payment date" and "Payment term" in variant maintenance.
Would appreciate if someone can give me the solution / suggestion for above issue?
Thanks & regards,
LOI

Hi,
1) You may copy the sample interface function module: SAMPLE_INTERFACE_00002110 (to get the passing parameters) and code your coding as below:
**To calculate Net due date = baseline date + payment term
FUNCTION yyyy.
LOOP AT T_REGUP_LST.
    T_REGUP_LST-ZZFAEDT = T_REGUP_LST-ZFBDT + T_REGUP_LST-ZTERM.
    MODIFY T_REGUP_LST.
ENDLOOP.
ENDFUNCTION.
2) Make sure you have declared the new field in tbl CI_REGUP_LST and CI_REGUH_LST (item level in tbl-CI_REGUP_LST; header level in tbl-CI_REGUH_LST).
3) Configure IMG through FI > Financial Accounting Global Settings > Business Transaction Events
a) Settings > Products > of a Customer > Define a new product and activate it
e.g Product = Zxxxx
b) Settings > P/S Function Modules > of a Customer >
e.g Event = 00002110
     Product = Zxxxx
     Appl = FI-FI
     Function Module = yyyy
4) Proceed to test the new fields added through F110: Payment / Proposal List from program RFZALI20
I hope to hear a good news from you.
Thanks & regards,
LOI

Using Dreamweaver CC 2014.1.1, when I select a set of paragraphs to turn into a Definition List, and select Format - Lists - Definition Lists, I get the dl tags but do not get the dt or dd tags?

I have used this before in earlier versions of DW and it worked fin. I tried tonight with CC 2014.1.1 in either design view or in codeview with the same results. I would select the text from the starting <p> tag to the ending </p> tag, and then in the menu choose Format - List - Definition List and only get the <dl> tags. Anyone else experience this?
Thanks!

That's how it works in CS6, too. And it is not just for definition lists. That is the expected outcome no matter which list type you use. DW doesn't know where the DTs and DDs begin and end because you've highlighted an entire paragraph and asked DW to format it as a DL.
I typically code my own Definition Lists. It's faster.
Nancy O.

Contacts list Sim list

Similar Messages

Maybe you are looking for