Content Activation Problem

Hi,
I have a problem in activation business content for some BI infoobjects. We have upgraded from BI 3.5 to 7.0. But some of the objects are not activated.
So i was trying to reactivate them and following are my concerns.
If i consider revised version and activate it, do i get object upgraded to 7.0 version.
If i consider the active version, then is it represents 7.0 version.
or do i need to install it from scratch from 7.0 business content.
Regards,
Vijju.

Hi Vijju,
Please try activation the revised version. The revised version is the 7.0 version. You should be fine with the activation of revised version.
Don't consider the Active version of the object that is available. You are safe with activation of revised version or install the infoobject from scratch.
-Sreek

Similar Messages

Business content activation problem ?

Hello ,
I am trying to activate material movement multiprovider with data flow before and after option .
Logically with this option , all infoobject should also get activated which is related to this multiprovider , but in my case it is not happening , and i have to activate this multiprovider separetly which is very lenthy job .
Could you please advice me , why it could happen and how to solve ?
Regards

Hi Akshay,
First can u give us the error for the infoobject you getting?
Second please select the grouping mode "before" only. I say this because in before and afterward collection mode there could be multiple of objects and dependencies on it which could create an error while activating the multiprovider.
So please do change your collection mode and try activating MP again. You wont be able to view the standard reports on the MP but you can collect this again by selecting the grouping mode "Only necessary objects" and check the query box. It will activate & install the std queries on infobjects.
Do send the long text for the error message if you receive any.
hope this helps.

BI Content Activation Problem

Hi,
In our organization we have two system 010 & 600, now we want to install same BI Content (Update rule & Transfer rule) in newly created system 400. So when we r trying to install the same BI Content it is not asking to install the 400 system.
The installation get start with the existing system i.e. 010 & 600. I want to install in 400 system.
How can i do this?
Pls help, ur suggessions r valuable!
Regards,
San

Hi,
Follow the following steps to install the query in BC....
1. RSA1 -> BI Content - Go to Source System Assignment which is indicated with cross mark and select the required source system as per the requirement.
2.Now go to collection mode tab and select collect Automatically.
3. Goto Grouping Tab and select only necessary objects.
4. Now in the middle window goto query elements->query and search for the query as per the requirement and Transfer it.
5.After the object collection is done the object will appear on right side of the window. Now select the Install and go for install in background.( Moniter the status of the request in SM37).
If the cubes related to this query are deactivate, activate it again..
I hope it helps U.
Regards,
SK.

Can you help me with FontExplorer font activation problems?

Anyone know how to solve a font activation problem I am having with FontExplorer 4.2? I am on a new mac with new fonts, I am using Maverick with Adobe CS6. With my new mac I bought the latest version of FontExporer Pro X 4.2. This program is having trouble with font activation in all my Adoble suite apps including Indesign. Here is what I am seeing:
1. The font activates, but the Adobe app does not recognize that it is active. If I go back to Font Explorer and deactivate manually, then re-activate manually. The adobe app might then recognize it. Sometimes it still doesn't. But this does not stay permanently, as soon as I do a restart I have to go through this process again. I see this more often with the User system fonts, but a few times with my regular fonts.
2. Other times, such as in Indesign, I go to open the file and the file stalls and doesn’t progress while it is trying to activate the fonts.
3. Another time I have seen after an illustrator file is opened the fonts aren't recognized as being opened and the text goes blank on the page.
4. In all adobe apps, if I go to use "replace font" on the missing fonts (even though they are turned on) the "replace font" menu only shows the basic system fonts, it won't show me the other fonts turned on.
I have seen these issues with both formerly created files and fresh new files.
I have tried the following based on feedback from Font Explorer staff:
Refresh your Spotlight database
1. Quit all applications other than FontExplorer X
2. Choose Tools > Refresh Spotlight Database
Clean your font caches
1. Quit all applications other than FontExplorer X 2. Choose Tools > Clean Application Font Caches (check all available checkboxes)
3. Choose Tools > Clean System Font Caches (requires restart)
Still after trying this multiple times, the errors continue and even get more random.
I have also tried this based on their feedback:
go to FONTEXPLORER X PRO -> PREFERENCES -> ADVANCED and make sure that "Automatically deactivate fonts which have not been activated by the system" is NOT set to never.
Then click on TOOLS and clean all font caches. Then reboot the system.
The auto-activation is using a new Apple technology (called Core Text), which unfortunately does not work correctly with some of the Adobe and Quark applications when keeping the fonts permanently activated. We are currently working on an update, and the next version of FontExplorer X Pro will fix this issue.
This has also not work. Can anyone help me?

Here is the official work-around for this problem.
1. Locate "FontExplorer X Pro.app" in Applications
2. Right-click on "FontExplorer X Pro.app" and select "Show Package Contents"
3. Navigate to /Contents/Helpers/
4. Double-click "FontExplorerXLauncher-3.app" or right-click and "Open" to launch it manually. This is needed only once, afterwards the plugins will work normally.
Please make sure you open the version with the "-3" suffix, the other one does not fix the problem.

BI Content Activation going for wrong source system

Hi,
I am trying to activate business content for the Customer cube in BI 7. The problem is that although the source system selection shows client 200 selected, the content activation goes for client 500 (which is the BI client). That is, during the activation process the process diverts to client 200 for no apparent reason. I have tried selecting other source systems, but the system still goes for client 200. Any idea of what is going on?
Many thanks!
Regards,
Adeel Hashmi

Hi Reddy,
I checked it already and it shows the T90CLNT090 - IDES ALE Central system (client 800) which is shown as "Self-def'd" and not R/3, infact i dont have any source system specified under R/3 option. How do i fix this, as mentioned earlier we have both ECC and BI in the same box, will this affect???

New ios 7 activation probleme

im having an activation probleme in the new update can anyone help?

All I can say is buyer beware. Lkely you purchased a stolen iPod. The Activation Lock is doing its job.
This:
iCloud: Find My iPhone Activation Lock in iOS 7
says
How do I check for Activation Lock before purchasing a used device?
When purchasing an iPhone, iPad, or iPod touch from someone other than Apple or an authorized Apple reseller, it is up to you to ensure that the device has been erased and is no longer linked to the previous owner’s account.
Follow each of these steps to make sure that you can use the device you purchase:
Turn the device on and slide to unlock.If the passcode lock screen or the home screen appears, the device has not been erased. Ask the seller to completely erase the device by going to Settings > General > Reset > Erase All Content and Settings. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been erased.
Begin the device setup process.After choosing a language, choosing a country, and connecting to a network, the device will begin activation. If you are asked for the previous owner’s Apple ID and password, the device is still linked to their account. Hand the device back to the seller and ask them to enter their password. If the previous owner is not present, they can remove the device from their account by signing in to icloud.com/find. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been removed from the previous owner’s account.
You will know that a device is ready for you to use when you are asked to “Set up your iPhone", “Set up your iPad", or “Set up your iPod” during the device setup process.

DC Activation Problem in CBS

Hello,
I am facing DC Activation problems in CBS.
- We have two DC utils and config. The config DC uses utils DC and everything is working fine locally
- Today we are migrating these local projects in NWDI.
- I created new DCs in NWDI and copied the SRC folder. Did all required steps for migration, built locally and it works fine.
- I then checked in utils and activated the same in NWDI, its working fine.
- I then defined the dependency from the active workspace and everything is still fine.
- Now I checkin the src of config DC and build the same. Here the problem arises. The Build Fails
- Checked SDN and can see lot of people facing this problem but there is no solution.
Any pointers to solve this problem will be helpful
Regards,
Shubham
Here is the problematic area in log:
     [wdgen] [Info]    Generating packages/com/arteriatech/ppc/uivisibilityws/model/Scrvar_Fstat.java
     [wdgen] WARNING: Metadata of component UIVisibilityComp is not valid! ComponentUsage "//WebDynpro/Component:com.arteriatech.ppc.uivisibility.comp.UIVisibilityComp/ComponentUsage:HandleExceptionCompInst", Role "UsedComponent": A minimum of 1 object(s) is required
     [wdgen] [Error]   com.arteriatech.ppc.uivisibility.comp.UIVisibilityComp --> Component UIVisibilityComp: Has invalid component usage 'HandleExceptionCompInst'
     [wdgen] [Error]   com.arteriatech.ppc.uivisibility.comp.UIVisibilityComp --> Component UIVisibilityComp [HandleExceptionCompInst]: Component usage has no used component
     [wdgen] [Error]   com.arteriatech.ppc.uivisibility.comp.UIVisibilityComp --> Component UIVisibilityComp [ValidationCompInst]: Component usage has no used component
     [wdgen] [Info]    Catching throwable null
     [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError

Problem Solved.
I removed the utils DC from my client. Also deleted the folder from the workspace. After this I created the project from the Dev Config perspective again. I was surprised to see there is no component in my utils DC and thats why the problem was there.
I again copied all the src folder in the workspace and refreshed the DC. Now it locked all the source in the activity. I checked it in and repeated the above excercise. This time all the source code was there.
I deleted the dependency in the config dc and created again from active workspace(although now I realize it was not required) and checkedin and activated.
Hurray!!! It got activated.
Regards,
Shubham

Adobe Content Viewer problem. Please Help me...

Hi after updating online. Folio, I tried to update the trial version of the publication on my iPad but I get this message: "the issue isavailable for dowload, but new signing for an application version. Update the application from the App Store. "I went to the AppStore and was not any update of the Content Viewer ... I deleted the version on my iPad I downloaded again ... but without success gives me the same problem ... Please help me ... how can I do??
thanks

Hello Bob and thank you for responding so quickly ... Would you be kind enough to send me the link where I can download older versions of Folio Builder and Folio Producers Panel tools for InDesign 5.5. I'm looking for them but I can not find them.
Thank you for your patience.
Il giorno 21/gen/2012, alle ore 16:18, Bob Levine ha scritto:
Re: Adobe Content Viewer problem. Please Help me...
created by Bob Levine in Digital Publishing Suite - View the full discussion
As discussed in numerous threads already, the new viewer has not been approved by Apple yet.
If you’re a pro or enterprise customer you can create your own viewer app. If not, you’ll have to wait or roll back to the older tools.
Bob
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4155907#4155907
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4155907#4155907. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

WHAT THE HELL IS GOING ON? Activation problem 194:100

What the ihell is going on?
I have been burdened with activation issues for weeks - see my previous thread. I have had no response here from Adobe about how to fix it. Please don't say this is a 'user to user' forum. It isn't a 'U2U' forum when Adobe state this is the first place we should look!
Now, no CC program will run owing to something called 'Activation problem 194:100'.
Yes, I have logged out. Yes, I have rebooted. Yes, I have deactivated 'more than 2 machines'. Why should I have to repeatedly click to 'deactivate 2 previous activations' when there has NEVER been more than one activation?
Adobe not only make me look a laughing stock in the classroom but this constant issue that has been going on for weeks now subliminally tells students Adobe software is useless!
When will I be able to use CC again? I am paying for it remember!!!!!!!!!!!!!!!!!!!!!!

Hello Rajshree,
Welcome to Adobe Forum.
CC has only EVER been activated on ONE PC.
If you look at http://forums.adobe.com/message/6198690#6198690 you'll see (like many other users) I have to constantly sign in and reactivate. It is probably this that is causing the multiple activations.
However, to reiterate, CC is only running on ONE computer. It has not at any time been activated on more than the same PC. One activation - one PC.
So, the suggestion of waiting a few hours (if the prog won't activate / run) is less than adequate. Like everyone else, I pay to have it running 24 hours a day - every day.

How to debug file content conversion problems?

Hi,
I'm trying to debug a file content conversion problem. I'm mapping a few nodes in an IDOC to a file of fixed length fields. I'm using the "<Node A>.fieldFixedLengths", "<Node B>.fieldFixedLengths", "<Node C>.fieldFixedLengths", etc. parameters to specify the fixed length records.
However, a certain node (for e.g. Node B) is causing a problem and if it is present in the IDOC, the output file does not get created. Upon checking the XI monitor, I notice that the file gets mapped correctly and thus the problem lies when the file adapter does the file content conversion. How do I debug this because there is no descriptive error in the XI log? If this node is not present, the file gets generated fine.
Thanks,
Basant Gupta

Hi,
If your SXMB_MONI shows, success status, then go to RWB->Message Monitoring->Message display tool and then check Audit log for the analysis,
So it wil help you debug the situation.
If there is no error, then check RWB->Component Monitoring->Adapter Monitoring for you file communciation channel..
/people/michal.krawczyk2/blog/2005/01/02/simple-adapter-and-message-monitoring
Regards,
Moorthy

Flash MX Professional 2004 Activation Problems

I am having trouble activating Flash MX Professional 2004. I have had the product for many years, but it is asking again to be reactivated, probably because I have moved the vmWare virtual machine on which it is installed to a new host computer.
I have learned that the old Macromedia activation servers are no longer available, and have tried using the information provided by http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html. But that only activates me to a non-professional version. I need to use features in the Professional version.
Is there a serial number available for Flash MX Professional 2004?

OK, I have got my problem sorted.
After a second call to UK customer service, I was e-mailed a serial number that they said was for Flash MX 2004 Professional. However, it didn't work with my version! My version is 7.2, and the original serial number of my product starts PFD700. The serial number given by Adobe is PFD800-00466-08280-86965. Maybe the 800 means its for a later version, don't know, but my version does not accept this as a valid serial number.
A third call to try to get a PFD700 serial number got me a brick wall again, they insisted that was the only serial number for MX 2004 Pro they had. At this point I followed sinious's suggestion and asked to talk to a supervisor. They were on the phone, and I was promised a call back. I'm still waiting.
So I hunted a bit harder with Google and eventually found a site that gave me a serial number. The use of that unlocked the Professional features of my version, and I'm up and running again.
Thanks for your contributions guys, you've both helped. I agree with sinious's critism of moccamaximum, and wouldn't normally go to sites of dubious provenance for help. But after being exhausted by my efforts to get help from Adobe - who to be fair nearly got there in the end - I went hunting and found something that solved my problem. After all, Adobe themselves are publishing activation-free serial numbers.
I've given the serial number I got from Adobe, it may help others who experience activation problems in the future.
But I'll follow sinious's advice and not give out the serial number or details of the website I got it from. It wasn't very hard to find.

Nokia lumiya 820 music activation problem

I have music activation problem, how to solve them ? when I start nokia music then display massage Activation problem. This problem from begining from purchase the mobile, so once I had close the nokia account and then reopnen the same account. I have not install this account any other mobile. So please give me solution for this problem.

DineshRamolia,
Welcome to Nokia Discussions!
Steps on how to activate Nokia Music for Windows Phone is located on this page at http://www.nokia.com/in-en/support/product/nokia-music/userguidance/?action=singleTopic&topic=GUID-D...
If the problem still persists, I suggest you to contact Nokia Support in your country.

HT4623 i have sim activation problem in my i phone after updating

i have sim activation problem in my i phone after updating

If the phone was unlocked by anyone other than Apple or the carrier it was locked to (that is, unlocked by hacking) then it will become locked to the original carrier when you update it.

How to capture content activity log from DMP?

Hi There,
I try to implement content activity log from DMP. The information that I want to get are DMP IP, Conent File Name (video or jpg file), open date/time. The only way that I can do is sending http command direct to DMP (http.file via port 7777).
Is it possible to implement Syslog server to get those information from DMP?
Thank you
Panya

Hi Panya,
There is a feature called "Proof Of Play" which was created exactly to track what the DMPs are playing, you can find the documentation at the following link:
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_2/dmm/user/guide/signs/proof.html
Is this what you are looking for?
Best Regards,
Marco

Business Content Activation - run time error

Hi guys,
We were at plugin 2002.1. We installed PI 2002.2 and PI 2003.1 on top of it.
After the plug-in upgrade, we are at support pack 9 for SAP-BW and 13 for BI-Content. For aba and basis, we are at 620 and support pack 32.
As part of the regression testing after the 2003.1 plugin upgrade, we found out that the business content activation abends with the following run time error.
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
Looks like it is trying to insert into table RSOLTPSOURCEFIET and the row already is existing. I thought the activation process is supposed to update something if it is already out there.
If we just select the 'only necessary', the activation goes through ok, but if we select 'before and after in the data flow', we get this abend.
Any clues???
Best regards,
makaleem

Hi Seow,
This is how I resolved it. I looked at the ST22 closely and one of the messages indicated that the number range is missing in tran SNRO for an infoObject. I created an entry for that infoobject using SNRO and tried activation and it worked.
When we created an OSS for SAP to look into it, they recommended the following two things. I tried these two but it did not work. I am mentioning them below just in case they may help you.
1) Sometimes there is inconsistency in the content cache when trying to activate objects and we have to delete the repository cache. To delete the repository cache, go to RSA1 ---> Business Content -
> Extras ---> Delete Rep Cache
2) Execute SAP_DROP_TMPTABLES program for types 1,2,3 and 6.
If this helps, don't forget to assign points.
Abdul

Content Activation Problem

Similar Messages

Maybe you are looking for