Content Alignment = Justify In text Box

Dear Friend,
i have text Area Item for description .Here i want content alignment justify in that Text Area.
How can i alighnment in Text Box.
Thanks
Edited by: Vedant on Sep 16, 2011 4:32 AM

Hello,
if by text box you mean a standard textarea item then i'm afraid you can't do that.
It might be possibel if you use a rich text editor item.
Regards,
Dirk

Similar Messages

  • Text Justify in text box

    I am using illustrator CS4 and I have text in text box and trying to equal justify. I have two columns of text in one page. I have created this brochure as follows
    1. I use sheet 81/2x11
    2. create two text boxes
    3. import text from MS word documents into these two text boxes.
    4. Trying to do equal justify, so I have selected individual text columns and try press justify but I did not see any chage.
    Here is text look like in one text box and it is righ now left alian but I want equal justify.
    We are offering CRM software that is an all-in-one, fully
    integrated solution that combines the robust power of
    client management and document management. By
    combining CRM, documents imaging and demography
    records in a single solution, our CRM software solution
    captures and manages episodic and longitudinal customer
    records information and delivers automated and streamlined
    workflow that allows comprehensive, expedient and
    meticulous monitoring of customer activity from administrative,
    financial  points of view. The result is a solution
    that promotes the timely and effective delivery of HR.
    Can you guid me through. Thanks.

    If that is the actual text you are using to put in your document I can see why it won't justify.
    Place it in Illustrator and click on > Type > Show hidden characters
    You'll see line returns at various points in the text. They are preventing the justification happening. If you go through and remove them, you'll see the justification doing what you want it to do.
    If there's not much text, do it manually. Otherwise go back to the original text document and get rid of its formatting

  • Importing Word documents into Robohelp 8: topic content is in a text box

    Hi
    I think I am doing standard stuff, but I have never used the import from Word function in RoboHelp before...
    I used  file > import to import a Word document, paginating on heading1 and heading2. All is fine, except that all the text of every topic is contained within a text box.
    Can I stop this happening? (Or fix it easily?)
    (I hope it is not relevant, and don't want to go into this unless it is relevant: but the Word document was actually the printed output from another RoboHelp project.)
    Thanks and regards,
    Peter Braham

    What I am thinking is that any Word import needs some cleaning up and the HTML is generally not good, blame Word for that. By importing the topics, you avoid that.
    The document is not exactly tagged as "from RH" and other products may well create documents in the same way. Bottom line is the way the document is created in Word seems to mean you get this problem in RH. It would probably be quite easy to find a workaround for that but you are still left with a Word import rather than a better RH import.
    These forums will testify to the number of problems Word imports can cause because of Word's code.
    See www.grainge.org for RoboHelp and Authoring tips

  • How do I make a box that resizes based on the amount of content that resides in a text box above it?

    I have a box that I want to use as a background to a text field on several pages. I want that box to be able to automatically resize itself based on how much content is in the text box that sits above it. How do I accomplish this?

    Hello,
    Please refer to forum post : http://forums.adobe.com/message/4828489#4828489
    Regards,
    Sachin

  • InfoPath 2013 - Rich Text box - Expand to show all text option not working

    I have create an InfoPath form and created a view which will be used for printing. I have a rich text box in this print view and the scroll option for this rich text box is set to "Expand to show all text". However, it is not working and it doesn't
    expand the size of the text box based on the content length.
    same thing used to work in InfoPath 2010.
    Any suggestions?
    Thanks,
    Neelesh

    Hi Wendy,
    Here are the steps I have used:
    1. On default view added a rich text box.
    2. Created another view called Print and mapped it to the same Field which I added to default view
    3. Set the Wrap text and Expand to show all text on both the Rich Text Box Properties - in default view and in Print
    view. Also set the height of the rich text box to auto.
    4. Set the print views as the print view for default view
    5. Deployed the form to SharePoint Form Library
    6. Opened the form in browser
    7. Entered the content in the rich text box in default view. It expands well if I have much content
    8. Clicked on Print preview and that opens up the print preview and it shows the rich text box only one line in height and with scroll bar
    I missed to mention that it is a web browser enabled form and I am using InfoPath 2013 and SP 2013.
    It does work fine in InfoPath client.
    Thanks.

  • Text box Vertical Justification greyed out in CS4

    Does anyone know why the ability to vertically justify my text boxes is disabled?  It is only in this one document (although, I think I remember this occurring in another).  The option is greyed out in the Text Frame Options window and will not allow me to click on the options in the tool bar.  This is rather frustrating and can't for the life of me figure out how to fix it.  Anyone else experience this or know how to fix it?
    Thanks,
    Mel

    Prior to CS5 you can't vertically justify any frame in which the text area is not rectangular. Not only can text wrap change the shape of a text area, but so can corner effects  (adding enough inset will get past this), and of course the use of non-rectangular frames.
    Thanks, Peter.  I had already adjusted the top inset enough to achieve the look I was looking for.  That's good to know about the corner effects.  That is actually when I experienced this before and used insets to achieve my desired look then, too. 
    Peter's pointing out that you could inadvertently move just one of the corners with the direct selection tool and have a frame that isn't a rectangle and then you loose the text box vertical justification option. If you are on OSX you can use this script to square up a selected skewed box:
    tell application "Adobe InDesign CS3"
    set {a, b, c, d} to geometric bounds of selection
    set entire path of path 1 of selection to {{b, a}, {d, a}, {d, c}, {b, c}}
    end tell

  • How can i pin a text box to the bottom of a VBOX

    Hi,
    Thank you in advance for your time, the question is how do i pin a text box to the bottom of a VBox, i dont know what code to add kindly help me out. The code i have with me is
    VBox {
    translateX: 10
    translateY: 10
    spacing: 20
    content: [
    Label {
    text: "TextBox:"
    TextBox {
    layoutInfo: LayoutInfo { minWidth: 100 width: 150 maxWidth: 200 }
    ] //contents
    //VBox
    now the text box has to go to the bottom of the VBox even if the VBox has other objects or if its resized.
    Regards,
    Kibu

    Vbox, acts much like a linear layout like in other languages.
    Just keep your declared textbox at the bottom of your content (content :[] ), then the text box will continue to get pushed further down your view, as you add other controls to your content.
    layoutX and layoutY will just increase your spacing from the previous declared control in that content.

  • Threading two different text boxes

    Hi.. How do you thread two different text box with two different text format?
    Eg. Text Box 1: Font Size 50pt...
    Text box 2: Font Size 10pt..
    Once you thread the two text boxes; and delete the content in Text box 1, what ever the content that flows to Text box 1 from text box 2 should auto format to Font Size 50.
    Any Idea how to do this?

    If I understand you corrrectly, I don't know how to do that, but in case I don't understand what you want, can you please tell me if I have this right?
    You have a chain of text frames. When you start entering text, it is 50pt. When the text fills the frame and jumps to the next frame, all of that text is 10pt. and this is all done automatically. In other words, the first word of the second frame would change from 10 to 50 automatically if it jumped back to the first frame for some reason (like the first frame being made larger, or some of it's text being deleted).
    If that's what you want, then maybe someone else knows how to do it, but I don't.

  • Frame content alignment

    Hi All,
    Does anyone know how to retrieve and set frame content alignment settings, not text alignment?
    Thank you in advance.

    Here is the solution:
    IMultiColumnTextFrame::GetVerticalJustification ();
    IMultiColumnTextFrame::SetVerticalJustification (Text::VerticalJustification vj)
    available values for Text::VerticalJustification are: kVJTop, kVJCenter, kVJBottom, kVJJustify, kVJInvalid, kVJNumValues

  • Table goes out of alignment in text box

    I have created a very simple table in InDesign CS5 on Windows 7, like this:
    However when you start typing into a cell, it goes like this:
    To fix it up you have to make the text box slightly bigger or smaller then resize back to what it's supposed to be. Also when I do a datamerge the first page shifts like this too, although the rest are correct. When you export to PDF it comes out wrong as well. If someone wants a sample file I can post it on here.
    Anyone have any ideas what is causing the alignment to change when text is entered into the table?

    Okay, I think I see where the problem lies - though you had me stumped for a moment there!
    So I see that you have the text box that contains your table assisting you in aligning your table to the center of your page. (i.e. the text box container is arranged around the outside of the page and the table is centered lef/right using paragraph centering and top/bottom using "align center"command from the control bar. While there's nothing particularly wrong with that method, I think it may be the source of your trouble with the alignment changing unexpectedly.
    When looking at your file, I found that removing the "align center" and changing instead to "align top" took away the jumpy behavior of the text box. It no longer shifted when I tried to type. It does however move the whole table to the top of the screen. For the moment let's leave it there. Align to Page: center l to r, center t to b.
    Your end result should be an item that is still perfectly centered on the page, but that can be type into without any unpredictable jumping around!
    Now, let's select the whole text box that contains the table. Click "Left Justify" in the Paragraphs panel. This will move the table to the top left of your document. Now, fit frame to content. Go to the align panel,

  • Hyphenation & text-align:justify in PDF's with CFDOCUMENT

    Hello everybody!
    We are using CF8.1 and are having problems of generating well designed PDF outputs with CFDOCUMENT. We would like to print out reports, which are hyphenated and have the text aligned. Example:
    This works fine:
    <html lang="en">
    <STYLE>p { width:260px;background-color:blue;-moz-hyphens: auto; -o-hyphens: auto; -webkit-hyphens: auto; -ms-hyphens: auto;  -hyphens: auto;text-align:justify}</STYLE>
    <P>Haematodynamometer Haematodynamometer Haematodynamometer Haematodynamometer Haematodynamometer Haematodynamometer Haematodynamometer Haematodynamometer Haematodynamometer</P>
    </html>
    This won't:
    <CFDOCUMENT FORMAT="PDF">
    <html lang="en">
          <STYLE>p { width:260px;background-color:blue;-moz-hyphens: auto; -o-hyphens: auto; -webkit-hyphens: auto; -ms-hyphens: auto;  -hyphens: auto;text-align:justify}</STYLE>
          <P>Haematodynamometer Haematodynamometer Haematodynamometer Haematodynamometer Haematodynamometer Haematodynamometer Haematodynamometer Haematodynamometer Haematodynamometer</P>
    </html>
    </CFDOCUMENT>
    Do you have any solutions on this topics? Are do I have to wait until CF11.
    Thanks in advance
    Matthias

    4tun8mom wrote:
    Now, the problem is that, while the client likes this, they don't like that the headers and footers are grayed out and the colors are not as vibrant in Word as the program part I created and saved as a PDF.
    They're being a bit impractical in their complaints, in fact they remind me of my Dad!  The final product is still fine.
    4tun8mom wrote:
    They also don't like that if we keep this as a Word document, all the text is editable.
    That's fair enough, the solution would be to make the text in the header and footer an image instead.
    4tun8mom wrote:
    So my question is, can I create a PDF that has the same features with the expandable text control boxes.  If I can, would you recommend InDesign to do this?
    No you can't.  I'm pretty sure you can't create a PDF with expandable boxes and I'm very sure that you can't create a PDF that will add pages with headers and footrs.  However you can create a PDF with basic fillable text boxes, they're called forms and you need Acrobat as well to do it, google it and you'll find plenty of info.

  • Displaying contents of a text file in a text box

    As the topic describes, I need to display the contents of a
    text file in a text box. How would one go about doing this? Thanks
    in advance.

    // setting up the text format options
    var FileFormat:TextFormat = new TextFormat ();
    FileFormat.font = "Verdana";
    FileFormat.size = 12;
    FileFormat.align = "left";
    FileFormat.color = 0xFFFFFF;
    /// load in text from folder load_in , filename is text.txt
    var my_lv:LoadVars = new LoadVars();
    my_lv.onLoad = function (success:Boolean):Void{
    if (success){
    textfield.text = this.txtVarLoaded;
    textfield.setTextFormat ( FileFormat );
    } else {
    trace ("error");
    my_lv.load ("load_in/text.txt"); // load in text.txt
    peace ;o)

  • Text box alignment problem

    Every time I create a new text box in an exsiting file, the text in a text box moves. the text alighment button is pressed EG: align to top of text box, Middle or bottom. but everytime I move the text box, the text will then move with in it. I turned off all text wraps and ticked suppress any text wrap in hidden layers (even when this is not ticked) nothing changes, The text still moves around inside the box. I am quite sure that this is not suppose to happen, especially if I ticked for  it to be align in the centre of the text box.
    Can someone help me please.

    Thank you so much. It's been bugging me for ages.

  • How do I center align the text in my text boxes if they are currently right aligned?

    I created a client questionnaire in Word and then turn it into a PDF and created the text boxes necessary. The problem I am having in Adobe XI Pro is that I want all of the text in my text boxes to be centrally aligned rather than left aligned. However, when creating and editing the text boxes, I see no option to help me do so. When clients fill out the form it looks messy because the information that the fill in tables in not centrally aligned, so it makes my tables look poorly organised. Help would be much appreciated, thank you.

    In Form Edit mode, right-click the field(s) and select Properties - Options, and under Alignment select "Center".

  • I am unable to print the full content of a text box within a PDF that was emailed to me - help!

    I open the pdf in Adobe Reader, and can see all of the content on screen by scrolling within the text boxes. But, because the content is "bigger" than the text box in some cases, when I print the pdf, the text gets truncated. Can I print in a way that allows me to see all text that the user entered?
    Thanks in advance for any guidance.

    Quit Safari.
    Open the Library folder in your home folder as follows:
    ☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
    ☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
    ~/Library
    Delete the following items from the Library folder:
    Caches/com.apple.Safari/Cache.db
    Preferences/com.apple.quicktime.plugin.preferences.plist
    Preferences/QuickTime Preferences
    Relaunch Safari and test.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

Maybe you are looking for

  • One iTunes Library, Multiple Users

    Is it possible to have one iTunes library (say the Administer's iTunes library) and share it with multiple users on the same computer? Thanks. Mick

  • Error While loading into BW using infoPackage

    Hi All, While following directions posted at the following wiki page https://wiki.sdn.sap.com/wiki/display/BOBJ/ConfiguretheLoadJobinBW%28DS+3.2%29, we get an error while loading data into BW using infoPackage via Data services 3.2 In SAP BI side Err

  • Function returning control via CType. Is this risk-free?

    I want an easy way to get a TabPage's child (user)control without writing CType() functions everywhere. For this I created a function that returns the control via CType: Private Function ChildIRCControl() As IRCControl Return CType(Me.TabControl1.Tab

  • Rac 11gr2 installation error

    Hi all I installing RAC 11gr2 in VMWARE 9. Most of the part went smooth except i cannot ping between nodes. It says destination host is unreachable. I tried many different way but in vain, I will appreciate your help and feedback. [root@RAC1 ~]# ifco

  • Importing a layered photohop file into flash [CS3]

    Hi there, new to the Forums here and for starters heres a good challenge for you. I have a .psd file with a background image and 3 layers above this. The 3 layers have numberous layer styles and settings applied to them. See Image >> I have tried imp