Content alignment problem

Alignment on all web pages is off, sign in boxes are gone, calenders overlap, graphics gone

Well, you could install an older version, but usually that doesn't cure this kind of problem. Instead, try creating a new profile. It should operate normally as though you were a first-time Firefox user. If that works out, then you can move your bookmarks to the new profile. Or you could go back to your old profile and try to rule out causes for the problem.
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
To create a new (blank) profile, fire up the Profile Manager: [http://support.mozilla.com/kb/Managing+profiles Managing profiles].
To move key settings like bookmarks from your damaged profile to the new profile, see: [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
Hope this helps.

Similar Messages

  • Content Alignment in webdynpro iView based on user language

    Hi,
    We have a webdynpro application which has a search screen
    (Arabic as well as English), based on the user language setting in Portal UME, the respective language text with options are displayed.
    This webdynpro application runs on same WAS where Portal is running.
    When we test this application standalone like typing the URL of the webdynpro application, it shows english text with Left to right aligned content in browser for <b>user X with Language as EN</b>.
    When we test this application standalone like typing the URL of the webdynpro application, it shows arabic text with Right to Left aligned content in browser for <b>user Y with Language as Arabic</b>.It works fine when it is stand alone (when we directly run the webdynpro).
    <b>We created a WebDynpro iView in Portal, and we tested with user <i>Y (whose language is set to Arabic),</i> issue is text is properly displayed in Arabic, but the content alignment is left to right, which should be Right to Left</b>.
    Please let me know your solution/thought to the above mentioned issue/problem.
    Thanks
    Senthil

    Hi,
    The webdynpro application works fine (alignment and content is fine)when i access it directly.
    When i create a webdynpro iView and run it inside portal it is not working fine (alignment is LTR instead of RTL)
    I went through the SAP help <a href="http://help.sap.com/saphelp_nw04/helpdata/en/6e/8aae409567942ae10000000a155106/frameset.htm">RTL Alignment</a>and tried creating new themes and created a new desktop and assigned it to the user. It is still the same with LTR alignment.
    The issue is, why it is not working inside PRT, when it works fine inside WebDynpro Runtime.
    Thanks
    Senthil

  • Having a image alignment problem using clearbox

    Hi,
    I'm having an image alignment problem. I cannot figure it out. I'm using the clearbox - lightbox dreamweaver widget. Using Dreamweaver CS6.
    Actual page located here. Any help would be appreciated.
    http://dirtysouthink.com/gallery/dustin2.html

    This has very little to do with Dreamweaver. DW is merely a tool to assist you in building a web site. It is purely a matter of styling (CSS).
    When I look at the structure, I see
    BODY-CONTENT (width: 490px)
         GALLERY (width: 452px)
              CONTAINER (width: 500px)
                   ITEM (width: 150px)
    From this I can deduce that:
    GALLERY will fit inside BODY-CONTENT
    CONTAINER will NOT fit inside GALLERY or BODY-CONTENT
    ITEM will fit three times into CONTAINER
    To start with, I would reduce the size of the CONTAINER so that it fits inside of its parent. Then I would adjust the width of the ITEM so that only two of them fit inside of the CONTAINER.

  • Banner Alignment Problem

    I am having an alignment issue with a website that I recently built using dreamweaver.
    http://bacs.myweb.uga.edu
    There is not an alignment problem on the front page (index.html), but subsequent pages (http://bacs.myweb.uga.edu/currentstudents.html) change the alignment of the banners below the tabs for each section.  Screen resolutions of 1280X800 do not have any alignment issues, but pretty much any other resolution changes the alignment.  Is there a solution to this problem?  Rather than posting all the code, you should be able to get it from the links above.  Thanks in advance.
    Frustrated in Athens,
    Aldo

    html
    <body>
    <div id="wrapper">
    </div>
    </body>
    css
    #wrapper {
    width: /*the width of your content */
    margin:0 auto; /*this will centre align it*/
    padding:0;

  • Adobe Content Viewer problem. Please Help me...

    Hi after updating online. Folio, I tried to update the trial version of the publication on my iPad but I get this message: "the issue isavailable for dowload, but new signing for an application version. Update the application from the App Store. "I went to the AppStore and was not any update of the Content Viewer ... I deleted the version on my iPad I downloaded again ... but without success gives me the same problem ... Please help me ... how can I do??
    thanks

    Hello Bob and thank you for responding so quickly ... Would you be kind enough to send me the link where I can download older versions of Folio Builder and Folio Producers Panel tools for InDesign 5.5. I'm looking for them but I can not find them.
    Thank you for your patience.
    Il giorno 21/gen/2012, alle ore 16:18, Bob Levine ha scritto:
    Re: Adobe Content Viewer problem. Please Help me...
    created by Bob Levine in Digital Publishing Suite - View the full discussion
    As discussed in numerous threads already, the new viewer has not been approved by Apple yet.
    If you’re a pro or enterprise customer you can create your own viewer app. If not, you’ll have to wait or roll back to the older tools.
    Bob
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4155907#4155907
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4155907#4155907. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Digital Publishing Suite by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Alignment problem in converting smartform printpreview into PDF

    Hi all,
    I am getting some alignment problem in converting smartform printpreview into PDF format, i.e the format of PDF is different from printpreviw of smartform.
    kindly suggest something so that alignment is not changed while converting to PDF.
    Regards,
    Sumalatha

    use below f.m to convert it into 255 characters....
         CALL FUNCTION 'QCE1_CONVERT'
            TABLES
              t_source_tab         = i_tline
              t_target_tab         = so_ali[]
            EXCEPTIONS
              convert_not_possible = 1
              OTHERS               = 2.

  • How to debug file content conversion problems?

    Hi,
    I'm trying to debug a file content conversion problem.  I'm mapping a few nodes in an IDOC to a file of fixed length fields.  I'm using the "<Node A>.fieldFixedLengths", "<Node B>.fieldFixedLengths", "<Node C>.fieldFixedLengths", etc. parameters to specify the fixed length records.
    However, a certain node (for e.g. Node B) is causing a problem and if it is present in the IDOC, the output file does not get created.  Upon checking the XI monitor, I notice that the file gets mapped correctly and thus the problem lies when the file adapter does the file content conversion.  How do I debug this because there is no descriptive error in the XI log?  If this node is not present, the file gets generated fine.
    Thanks,
    Basant Gupta

    Hi,
    If your SXMB_MONI shows, success status, then go to RWB->Message Monitoring->Message display tool and then check Audit log for the analysis,
    So it wil help you debug the situation.
    If there is no error, then check RWB->Component Monitoring->Adapter Monitoring for you file communciation channel..
    /people/michal.krawczyk2/blog/2005/01/02/simple-adapter-and-message-monitoring
    Regards,
    Moorthy

  • Alignment problem on abap report after Unicode conversion

    Hi,
    I've recently convert my system to unicode. Now my user is complaining the aged debtor report (ABAP) is having a column alignment problem when displaying the Japanese character.
    I'm not sure what to do now. Have anyone experience this and let me know how can I sove the problem?
    /Eida

    Hi,
    you need to regenerate the data
    For this regeneration, you start the program RKETREGP with the parameter
    application class 'KK', subclass '01' and table name 'KKROBJ'.
    br, Guido

  • Content Alignment = Justify In text Box

    Dear Friend,
    i have text Area Item for description .Here i want content alignment justify in that Text Area.
    How can i alighnment in Text Box.
    Thanks
    Edited by: Vedant on Sep 16, 2011 4:32 AM

    Hello,
    if by text box you mean a standard textarea item then i'm afraid you can't do that.
    It might be possibel if you use a rich text editor item.
    Regards,
    Dirk

  • Content protection problem

    Hi. I've got that content protection problem when downloading from blackberry app world. Every time I try to download something, a message comes up that says, "An error has occurred communicating with the BlackBerry App World Client. If you have content protection enabled on your device, please disable and try again,". I'm sure a lot of people had this problem and many of them have had their problem solved, but i've already tried solutions like disabling the encryption and doing the battery pull but the message still comes up.
    Are there any other solutions that I can try?
    Thank you in advance

    Hello timothyW, 
    Welcome to the forums. 
    Have a look at this article for help changing the content protection settings on your BlackBerry® smartphone. 
    KB11963
    How to change the setting for Content Protection on the BlackBerry smartphone
    Hope this helps. Have a good day. 
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Same alignment problem! can ANYONE help??

    Hi guys i still need help with my alignment problem! My nav
    bar lokos good in the preview window of fireworks
    CLICK
    HERE TO VIEW THE NAV BAR IN FIREWORKS
    but when previewed in a browser or exported into dreamweaver,
    the navbar is all out of order
    CLICK
    HERE TO VIEW THE NAV BAR IN DREAMWEAVER
    Can anyone tell me what is going on?? i really need to launch
    the website ASAP.
    Thankyou!

    10totti wrote:
    > Hi guys i still need help with my alignment problem! My
    nav bar lokos good in
    > the preview window of fireworks
    >
    >
    http://img97.imageshack.us/my.php?image=nav1yp1.jpg
    I hate being harassed by ads and will not review images on
    the image
    shack site any longer. Post the screen shot or original file
    to your
    personal site.
    Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
    http://www.projectseven.com
    Fireworks Newsgroup:
    news://forums.projectseven.com/fireworks/
    CSS Newsgroup: news://forums.projectseven.com/css/
    Design Aid Kits:
    http://www.webdevbiz.com/pwf/index.cfm

  • Paper Alignment problems!

    I have a HP F4280 all in one printer, just recently when doing any type of printing, everything is printed but comes off alignment, that is not straight on the page. How can I fix this paper alignment problem? I've had this printer for 2 years now and just recently the alignment is off, I haven't done anything different!

    The troubleshooting page here may help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Spot healing brush alignment problem

    Using Photoshop CS4 (11.0) on a Mac with 10.5.6. Sometimes the spot healing brush works as expected. However, after working for a while, the alignment seems to be off--I hover the cursor over the spot I want to retouch, but when I click the mouse the area retouched is a bit (1/4" or so) below the spot healing brush cursor. If I quite and restart Pshop the problem goes away. This is with the spot healing brush--not the one where you need to select where to clone from. Is something wrong, or is there a new feature I don't know about that's causing this? I've used the spot healing brush quite a bit with CS3.
    If anyone has any thoughts, I'd appreciate hearing them. This is getting frustrating.

    I think you are talking about a different issue here. This problem is not specific to the spot healing brush.
    @ OP: The brush alignment problem is very real and I have it frequently when working with larger files (approximately >500MB in memory). I have two macs, a macbook (GMA X3100) and a mac pro (ATI Radeon HD 2600 XT). So two completely different hardware arrangements that have the exact same problem.This is clearly not a problem with graphics cards.
    Drawing with any tool like: brush (any brush - dodge/burn, blur, eraser etc.), lasso (any lasso), line, crop tool etc. will result in a misalignment of about 0,5 cm directly downward. However, clicking on menus and dialogue boxes works as expected. Switching off OpenGL features in PS WILL NOT PREVENT THE PROBLEM (if I shout, maybe Adobe will hear...). The same problem appears whether I'm using a Wacom tablet or a mouse. It even appears when the Wacom driver is uninstalled.
    So, if Adobe is not acknowledging the problem it's safe to assume it will be featured in CS5 as well.
    @ Jim: Sorry, I would have posted in the other thread but your link does not work anymore.

  • Extended Content type problem

    Extended Content type problem
    I want to extend the content type 'ExtendDocument' from 'Document'.
    So I use 'Oracle Internet File System Manager' to create a new Class Object named 'EXTENDDOCUMENT', which is extend from 'DOCUMENT', and add a attribute 'EXTENDURL'.
    This Class Object's bean class is 'ifs.beans.ExtendDocument' and server class is 'ifs.server.S_ExtendDocument'.
    I create these 2 java class and put the class files to ORACLE_AS_HOME\ifs\cmsdk\custom_classes directory.
    As I want to set the object type as 'ExtendDocument' when uploading a file which expend name is '*.wmv', so that need to change 2 default value 'ParserLookupByFileExtension' and 'IFS.PARSER.ObjectTypeLookupByFileExtension'
    So I add 'name=wmv, datatype=STRING, value=oracle.ifs.beans.parsers.ClassSelectionParser' to ParserLookupByFileExtension.
    And then add 'name=wmv, datatype=STRING, value=EXTENDDOCUMENT' to IFS.PARSER.ObjectTypeLookupByFileExtension.
    After done above actions, i restart my oracle application.
    I use CUP to upload a test file 'test.wmv' to CMSDK repository, and its type is 'EXTENDDOCUMENT'.
    But if I use FTP or WebStarterApp application to upload 'test.wmv' file to CMSDK repository, then its type is 'DOCUMENT'.
    Why and how to change to make FTP and WebStarterApp application can upload *.wmv file's type as 'EXTENDDOCUMENT'?
    anybody can help me?
    thanks.

    Nirav-P-Thakar wrote:
    FileNameMap  fnmMime        = URLConnection.getFileNameMap ( ) ;
    fnmMime.getContentTypeFor(fileName);
    URLConnection.guessContentTypeFromName(fileName);I have tried out both methods but it returns null when the file is of type MS Office or Open Office.In reply 1 BalusC said..
    "Alternatively you can use ServletContext#getMimeType() for this. It guesses the content type based on the mime mapping as it is been definied in the web.xml of the application server and the webapplication. If it returns null, then you need to add new <mime-mapping> entry to the web.xml."
    I would try doing it this way. Try including entries for the mime mappings in the deployment descriptor of the web application.

  • Scale9Grid and content alignment

    I've just started using fb3 and while converting my fb2
    project, I've come to notice that the scale9grid of the container's
    skin now by default affects how the content is aligned. Although
    otherwise changes to margin/padding attributes feel welcome, this
    in particular makes me feel like going back to the dark ages of
    html tables, where content can't overlap with the surrounding skin
    parts and has to fit inside the stretching part of the skin.
    Okay, pretty quickly I discovered that setting ClipContent to
    false allows placing the content in relation to the container's
    (and skin's) top-left corner but still, for instance, setting
    content's width or height to 100% sets it's size to match the
    scale9grid's inner rectangle instead of container's size.
    It's still possible to hack through this by setting negative
    padding values to counter the effect of the scale9 margins but it's
    really a drag. Container's width and height still match the size of
    the skin, not the stretching square of the scale9, so why can't the
    content alignment and paddings default to this?

    ... still, setting clipContent = false is hardly a solution
    if you want scrollable content... unless you add another
    transparent container to clip the content and control scroll.
    Here's a set of skins I've made for flex2..
    http://www.elisanet.fi/~d635061/vistastyleskins/
    Getting them right wasn't too hard although some components
    still lacked ability to tweak paddings/borderThickness.. Now, I
    wonder how far I can get with flex3 when it's trying to stretch the
    skin each time around the content? If you look at the panel skins,
    you'll notice that the skin has some graphic style behind the panel
    content. The stretching gridsquare is below and to the right of
    this, so the panel stretches alright, but it's obvious that I
    wouldn't want the content to follow the scalegrid in any way. Only
    thing the content should obey are the paddings (
    'borderThicknesses' in flex2).

Maybe you are looking for

  • Itunes 9.0.2 ridiculously slow

    I am by no means the first person to post on this topic, but after reading through countless threads that all lead to the same frustrating "Where is Apple??" conclusion, I thought I would post my own thread to see if any light has been shed on the su

  • Are there any issues with starting a task sequence one day and finishing it up days later?

    Hello,  We have a few techs who, for whatever reason, will sometimes start a deployment task sequence (from boot media, USB) and then finish the task sequence the next day or days later.  For example, I had a recent one where the smsts log file had a

  • Powerpoint uploads and MIME types

    I am building an application to upload PPT files. I want to test the incoming filenames to see if it *is* a PPT file, but cannot find a MIME type for it. How should I do this so that I only allow such files to be uploaded? Murray --- ICQ 71997575 Ado

  • Someone...please reply!!!!...its urgent!

    Hi, I need to send in some values from an applet via a socket connection to the server. These values need to encrypted and have to be decrypted on the server side. Can anyone suggest me a method to do it. Or show me some example code. I think we can

  • POSIX Reports problem with SSB

    I changed the HDD in my Mid 2009 MBP since the old one is not working anymore. I safely replaced it with samsung SSD 840 pro 128 gb. I tried to install the mac os x 10.6 snowleopard but when I was about to choose a drive, the SSD was nto appearing so