Content Engine errors.

Hi there,
I'm having some problems with Content Engine.
I would appreciate any help.
It gives following errors:
Jun 12 08:15:59 CE01 wccp: %CE-WCCP-5-500008: WCCP: A new view from
the 25.25.25.25. Change number = 28
Jun 12 08:15:59 CE01 wccp: %CE-WCCP-5-500014: WCCP: New CE notified of
15.16.17.208
Jun 12 08:15:59 CE01 wccp: %CE-WCCP-5-500026: New CE entry being
created for 15.16.17.208 seen by router 25.25.25.25
Jun 12 08:16:07 CE01 wccp: %CE-WCCP-4-500015: WCCP:No assignment sent:
15.16.17.204 not in Router View
Jun 12 08:16:08 CE01 wccp: %CE-WCCP-5-500008: WCCP: A new view from
the 25.25.25.25. Change number = 29
Jun 12 08:16:08 CE01 wccp: %CE-WCCP-5-500014: WCCP: New CE notified of
15.16.17.204
Jun 12 08:16:08 CE01 wccp: %CE-WCCP-5-500026: New CE entry being
created for 15.16.17.204 seen by router 25.25.25.25
Jun 12 08:16:17 CE01 wccp: %CE-WCCP-5-500019: WCCP: New WC in compute
assign 15.16.17.204
Jun 12 08:16:40 CE01 wccp: %CE-WCCP-3-500001: HTTP Proxy may be down,
keepalives halted!
Jun 12 08:20:54 CE01 java: %CE-CMS-4-700001: ds_getStruct got error :
50 for key stat/cache/http/perf/throughput/requests/sum connection 5
Jun 12 08:20:54 CE01 java: %CE-CMS-4-700001: ds_getStruct: unable to
get `stat/cache/http/perf/throughput/requests/sum' from dataserver
Jun 12 08:20:54 CE01 java: %CE-CMS-4-700001: unable to get http
request throughput stats(error 50)
Jun 12 08:20:54 CE01 java: %CE-CMS-4-700001: ds_getStruct got error :
4 for key stat/cache/https/request connection 5
Jun 12 08:20:54 CE01 java: %CE-CMS-4-700001: ds_getStruct: unable to
get `stat/cache/https/request' from dataserver
Jun 12 08:20:54 CE01 java: %CE-CMS-4-700001: unable to get https
request throughput stats(error 4)
Jun 12 08:20:54 CE01 java: %CE-CMS-4-700001: ds_getStruct got error :
4 for key stat/cache/ftp connection 5
Jun 12 08:20:54 CE01 java: %CE-CMS-4-700001: ds_getStruct: unable to
get `stat/cache/ftp' from dataserver
Jun 12 08:20:54 CE01 java: %CE-CMS-4-700001: unable to get
ftp-over-http request throughput stats(error 4)
Jun 12 08:20:54 CE01 java: %CE-CMS-4-700001: ds_getStruct got error :
4 for key stat/cache/http/usage/cpu/sum connection 5
Jun 12 08:20:54 CE01 java: %CE-CMS-4-700001: ds_getStruct: unable to
get `stat/cache/http/usage/cpu/sum' from dataserver
Jun 12 08:20:54 CE01 java: %CE-CMS-4-700001: unable to get cpu
stats(error 4)

Hi guys,
I am really out of ideas!!!
I've updated software couple times already.
but nothing helps.
it still gives same error:
Jun 16 14:23:01 ponent exec_show_stats: %CE-CLI-3-170013: item stat/cache/http/usage/cpu/sum not found not found in dataserver
Jun 16 14:23:01 ponent exec_show_stats: %CE-CLI-3-170013: item stat/cache/http/request not found not found in dataserver
Jun 16 14:23:01 ponent exec_show_stats: %CE-CLI-3-170013: item stat/cache/https/request not found not found in dataserver
Jun 16 14:23:01 ponent exec_show_stats: %CE-CLI-3-170013: item stat/cache/https/requests not found not found in dataserver
Jun 16 14:23:01 ponent exec_show_stats: %CE-CLI-3-170013: item stat/cache/ftp-native not found not found in dataserver
Jun 16 14:23:01 ponent exec_show_stats: %CE-CLI-3-170013: item stat/cache/ftp not found not found in dataserver
Jun 16 14:23:02 ponent exec_show_stats: %CE-CLI-3-170013: item stat/wccp/bypass not found not found in dataserver
Jun 16 14:23:02 ponent exec_show_stats: %CE-CLI-3-170013: item stat/wccp/bypass not found not found in dataserver
Jun 16 14:23:52 ponent exec_rule: %CE-CLI-3-170013: Verifier not responding. when setting cfg/gl/cache/rule/stat/show (Error number: 32)
Jun 16 14:23:52 ponent exec_show_stats: %CE-CLI-3-170013: item stat/cache/http/err not found not found in dataserver
Jun 16 14:23:52 ponent exec_show_stats: %CE-CLI-3-170013: item stat/cache/https/err not found not found in dataserver
Jun 16 14:24:37 ponent cfg_bin_urlfilter: %CE-CLI-3-170013: Verifier didn't respond. Need to re-register verifier. when setting /cfg/gl/cache/urlfilter/http/enable (Error number: 64)
Jun 16 14:24:45 ponent java: %CE-CMS-4-700001: ds_getStruct got error : 4 for key stat/cache/http/perf/throughput/requests/sum connection 5
Jun 16 14:24:45 ponent java: %CE-CMS-4-700001: ds_getStruct: unable to get `stat/cache/http/perf/throughput/requests/sum' from dataserver
Jun 16 14:24:45 ponent java: %CE-CMS-4-700001: unable to get http request throughput stats(error 4)
Jun 16 14:24:45 ponent java: %CE-CMS-4-700001: ds_getStruct got error : 4 for key stat/cache/https/request connection 5
Jun 16 14:24:45 ponent java: %CE-CMS-4-700001: ds_getStruct: unable to get `stat/cache/https/request' from dataserver
Jun 16 14:24:45 ponent java: %CE-CMS-4-700001: unable to get https request throughput stats(error 4)
Jun 16 14:24:45 ponent java: %CE-CMS-4-700001: ds_getStruct got error : 4 for key stat/cache/ftp connection 5
Jun 16 14:24:45 ponent java: %CE-CMS-4-700001: ds_getStruct: unable to get `stat/cache/ftp' from dataserver
Jun 16 14:24:45 ponent java: %CE-CMS-4-700001: unable to get ftp-over-http request throughput stats(error 4)
Jun 16 14:24:45 ponent java: %CE-CMS-4-700001: ds_getStruct got error : 4 for key stat/cache/http/usage/cpu/sum connection 5
Jun 16 14:24:45 ponent java: %CE-CMS-4-700001: ds_getStruct: unable to get `stat/cache/http/usage/cpu/sum' from dataserver
Jun 16 14:24:45 ponent java: %CE-CMS-4-700001: unable to get cpu stats(error 4)
Jun 16 14:24:47 ponent java: %CE-CMS-4-700001: ds_getStruct got error : 4 for key stat/cache/http/perf/throughput/requests/sum connection 5
Jun 16 14:24:47 ponent java: %CE-CMS-4-700001: ds_getStruct: unable to get `stat/cache/http/perf/throughput/requests/sum' from dataserver
Jun 16 14:24:47 ponent java: %CE-CMS-4-700001: unable to get http request throughput stats(error 4)
Jun 16 14:25:15 ponent cfg_bin_urlfilter: %CE-CLI-3-170013: Verifier didn't respond. Need to re-register verifier. when setting /cfg/gl/cache/urlfilter/http/enable (Error number: 64)
Jun 16 14:25:24 ponent writemem.sh: %CE-CLI-2-170054: running-config has 0 line(s)
Jun 16 14:25:24 ponent exec_copy: %CE-CLI-3-170055: Copy running-config to startup-config failed!. status(1.20)
please, any suggestion would be appreciated.

Similar Messages

Content Engine Module is logging DHCP errors

Content Engine Module in Cisco 3725 is logging the following eror continously:
Sep 29 16:47:50 ContentEngine dhclient: %CE-DHCP-5-191000: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
Sep 29 16:47:54 ContentEngine dhclient: %CE-DHCP-5-191000: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
Sep 29 16:47:58 ContentEngine smartd: %CE-SMARTD-3-435000: No Errors Logged
Sep 29 16:48:05 ContentEngine dhclient: %CE-DHCP-5-191000: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 1
Sep 29 16:48:06 ContentEngine dhclient: %CE-DHCP-5-191000: No DHCPOFFERS received.
Sep 29 16:48:06 ContentEngine dhclient: %CE-DHCP-5-191000: No working leases in persistent database - sleeping.
Sep 29 16:48:06 ContentEngine %CE-DHCP-5-191000: Script called with reason: FAIL
Sep 29 16:52:58 ContentEngine smartd: %CE-SMARTD-3-435000: No Errors Logged
Disable the external interface (shutdown) didn't fix the problem:
Sep 29 17:02:05 ContentEngine dhclient: %CE-DHCP-5-191000: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
Sep 29 17:02:05 ContentEngine dhclient: %CE-DHCP-3-191000: send_packet: Network is down
Sep 29 17:02:08 ContentEngine dhclient: %CE-DHCP-5-191000: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
Sep 29 17:02:08 ContentEngine dhclient: %CE-DHCP-3-191000: send_packet: Network is down
Sep 29 17:02:11 ContentEngine dhclient: %CE-DHCP-5-191000: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
Sep 29 17:02:11 ContentEngine dhclient: %CE-DHCP-3-191000: send_packet: Network is down
Sep 29 17:02:16 ContentEngine dhclient: %CE-DHCP-5-191000: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
Sep 29 17:02:16 ContentEngine dhclient: %CE-DHCP-3-191000: send_packet: Network is down
Sep 29 17:02:21 ContentEngine dhclient: %CE-DHCP-5-191000: No DHCPOFFERS received.
Sep 29 17:02:21 ContentEngine dhclient: %CE-DHCP-5-191000: No working leases in persistent database - sleeping.
Sep 29 17:02:21 ContentEngine %CE-DHCP-5-191000: Script called with reason: FAIL
Sep 29 17:02:58 ContentEngine smartd: %CE-SMARTD-3-435000: No Errors Logged
Any ideas how to fix this problem ?

Try the global command:
ce(config)# no auto-register enable
http://www.cisco.com/univercd/cc/td/doc/product/webscale/uce/acns53/53cref/6812ref.htm#wp1038726

Query Engine Error:

Post Author: swordfish8
CA Forum: General
Hi, Many thank for taking the time to read this thread, the web application work on development box but fails when deployed.
Please help, the problem is detailed below, cheers, Praveen
Developed Environment
Web Application Developed in VS .NET 2002
Crystal Reports 9.0
Set Up Package :
Project Output: Primary Output and Content Files selected
Merge Modules:        Database_Access.msm
                                       Database_Access_enu.msm
                             Managed.msm
                             Regwiz.msm
                             VC_CRT.msm
                             VC_STL.msm
Code:
mycommand.CommandText = "ASR_STATISTICS"
mycommand.CommandType = CommandType.StoredProcedure
With mycommand.Parameters
.Add(New SqlParameter("@WeekStartDate", SqlDbType.DateTime)).Value =    _CDate(Me.txtDate.Text.Trim)
.Add(New SqlParameter("@WeekEndDate", SqlDbType.DateTime)).Value = _
CDate(Me.txtEndDate.Text.Trim)
.Add(New SqlParameter("@Customer", SqlDbType.VarChar)).Value = _
           (Me.lstCustomer.SelectedItem.Value.Trim)
End With
Dim myDA As New SqlClient.SqlDataAdapter()
myDA.SelectCommand = mycommand
Dim myds As New Dataset1()
myDA.Fill(myds, "ASR_STATISTICS")
Dim oRpt As New crptStatistics()
oRpt.SetDataSource(myds)
Me.CrystalReportViewer.ReportSource = oRpt
Installed the web application on the server
Operating System: Windows Server 2003
ERROR
Server Error in '/ASDReports' Application.
Query Engine Error: 'C:\WINDOWS\TEMP\temp_dff30854-29f4-4c4e-8fe0-66dbea4cd19b.rpt'
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: CrystalDecisions.CrystalReports.Engine.DataSourceException: Query Engine Error: 'C:\WINDOWS\TEMP\temp_dff30854-29f4-4c4e-8fe0-66dbea4cd19b.rpt'Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[DataSourceException: Query Engine Error: 'C:\WINDOWS\TEMP\temp_dff30854-29f4-4c4e-8fe0-66dbea4cd19b.rpt']
    . K(String
, EngineExceptionErrorID   ) +514
    . F(Int16   , Int32   ) +493
   CrystalDecisions.CrystalReports.Engine.FormatEngine.GetPage(PageRequestContext reqContext) +462
   CrystalDecisions.ReportSource.LocalReportSourceBase.GetPage(PageRequestContext pageReqContext) +201
   CrystalDecisions.Web.ReportAgent.v(Boolean `) +137
   CrystalDecisions.Web.CrystalReportViewer.OnPreRender(EventArgs e) +99
   System.Web.UI.Control.PreRenderRecursiveInternal() +77
   System.Web.UI.Control.PreRenderRecursiveInternal() +161
   System.Web.UI.Control.PreRenderRecursiveInternal() +161
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832

Post Author: Bandit07
CA Forum: Upgrading and Licensing
I would go through and add in each criteria 1 at a time to see which one is causing the error.

NI Variable Engine:Error:

I have a systemthat has been running fine for over a year. Upon failure the customer returned the processor to us and I took it to a known working unit to see what was going on with it.
First thing, in MAX you cannot see anything under Devices and Interfaces, only thing that shows up is Software.
I connected a monitor and keyboard to the PXI directly and the following errors are displayed (no way of doing a screen shot so I caught as much as I could):
tStatus2 Contents:
              Error code = -2147220721
Component Name = nidevldp
File Name = p:\Measurements\Infrastructure\devld\trunk\1.8source\mxsCon
figWrapper.cpp
   Line # = 103
   Address of StatusDesc = 0x0
   Stack Trace = 0x1F6EB46
   0x2167730
   0x216BFC3
   [and a bunch more]
NI Variable Engine: Error: Unable to load the MXS conf plugin: Failed to get MAX Configuration Interface: 0x80004005
NI Variable Engine: C:\ni-rt\system\ni_tagger_plugin_mxs.dll: Failure to load plugin: Unexpected error: Unable to get the interface from plug-in
Nothing has changed on the system in over a year so I know it is not software. One day it just would not start running the machine.
The processor is a (now obsolete) PXI-8184.
Any clues or do I have to replace it, which will be fun because the newer PXI-8183 is a different size.
Thanks for any input.

This is a fairly common problem, in my experience. We use PXI RT controllers for several test stands, and I have found that the MAX Configuration database is quite easily corrupted if the controller is powered down without closing and cleaning up all the DAQmx tasks. I have no idea why an embedded system would be so easily corrupted, but here are the steps I have taken to deal with the (inevitable) corruptions:
I created a "Shutdown RT System" button accessible via a remote front panel from my Host PC that will trigger an interrupt to stop all DAQ tasks and loops on the RT system. I make sure that any time the system needs to be powered down/rebooted, that the operator first presses this button to put the controller into a safe-to-shutdown state.
I used the RTSystemReplication toolset to create a backup image of the RT controller HDD on my host PC. I created a separate compiled executable that I configured in Windows scheduler to create weekly backups of the RT controller. I have another application that redeploys the backup in the event of a database corruption. Note that the RT controller must first be completely formatted before the backup image can be applied.
It is very frustrating that such a procedure is necessary (and it is necessary--even with uninterruptible power supplies, we still have the occasional power outage that outlasts the backup battery, not to mention oops situations where the system is restarted without stopping all DAQmx tasks). But by taking the steps listed above, I have managed to reduce the downtime associated with these gross system failures to roughly one hour per incident, as opposed to the 4+ hours it used to take to fully reinstall all the software components and recalibrate channels as necessary.
If anyone else has any other ideas as to how to avoid/deal with MAX configuration corruptions on PXI RT controllers, please respond with descriptions.

Content Engine Problem

Dear All,
My apologies if this posting is on the wrong board.
I've a problem with our content engine returning an error of:
"Tre reply from server is not valid"
The URL of the site is http://hiring.monster.co.uk/jobs/createtitle.aspx?mode=qb.
I've attached a screenshot of the error message.
Any advice or help would be greatly appreciated.
Thank you in advance.
Sinh

This symptom is observed on a router on which Web Cache
Communication Protocol (WCCP) is enabled and Cisco Express Forwarding (CEF)
switching is disabled. If the caches are Cisco caches, they will be running
software prior to ACNS 4.2.5.
solution: Ensure that CEF switching is enabled on the router. If this is not possible, the impact of the problem on the cache will be minimized if the authentication bypass function is disabled.also try upgrading IOS to 12.1(18.01)E which may solve the issue.

Question for content engine

Hi,
I have a content engine 565A with ACNS 5.4.5.7, running http pxory mode. All of the windows clients setup proxy server to the content engtine. This day the windows client executed windowsupdate, but got the error message : 0x80072EFE. I have tried to setup a rule to ingore cached for the microsoft windowsupdate server, but it doesn't work. Can you help to identify this problem?
I want to bypass all of the windowsupdate server, but we can not use domain name in bypass command, it support IP addresses only. Is there any other solution to bypass some servers by domain ( for example : *.windowsupdate.microsoft.com ) ?
Best Regards,
Jackson Ku

Hi,
I have a content engine 565A with ACNS 5.4.5.7, running http pxory mode. All of the windows clients setup proxy server to the content engtine. This day the windows client executed windowsupdate, but got the error message : 0x80072EFE. I have tried to setup a rule to ingore cached for the microsoft windowsupdate server, but it doesn't work. Can you help to identify this problem?
I want to bypass all of the windowsupdate server, but we can not use domain name in bypass command, it support IP addresses only. Is there any other solution to bypass some servers by domain ( for example : *.windowsupdate.microsoft.com ) ?
Best Regards,
Jackson Ku

Saturation on Content engine CE-565 and Smartfiler log

Hi, with content engine CE-565-K9
we have the following message log on the smartfilter:
"Jun 25 08:19:03 cer44sec-pxy2.cer44.recouv cache: %CE-UNKNOWN-4-899999: too many jobs in plugin thread pool queue (1001). Maximum allowed is: 1000
Jun 25 08:19:03 cer44sec-pxy.cer44.recouv cache: %CE-UNKNOWN-3-899999: Failed to start job to look up groups for user 'UR49100640'"
I can't see how is limited the thread number on the CE565. So who can explain to me the signification of this log and/or how configring the maximun thread on the CE565.
Thank's
Michel

Smartfilter uses a pool of 20 threads for LDAP lookups. What this error indicates is that the number of outstanding LDAP requests has grown to more than 1000 which is the limit supported.

Error in crawl log "Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "

Hi
I get the following error in my crawl logs
"Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "
Because of this i suspect, the search results are not including those aspx pages marked as "Hide physical urls from search".
This error is not available in the another environment where the aspx pages are coming in the results.
Thanks
Joe

Hi Joe,
Greetings!
Reset the index and re-crawl. That usually clears it
If you are using NTLM authentication, then make sure that you specified the PassThrough authentication for crawling
Probably you need to debug the BDC code that underlies the external content types.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/41a86c43-151d-47cd-af73-967a4c940611/lotus-notes-connector-error-while-crawling-lob-contents?forum=sharepointsearch
Please remember to click 'Mark as Answer' on the answer if it helps you

Content Engine compatability with Windows Media Player

I am currently running ACNS version 5.5 on our CE510 Content Engine. We want to set this box up to serve VOD requests from WMT. I think the clients on site are all using Windows Media Player version 10. Does this version of ACNS software work with Windows Media Player 10?

Dan
this brings up an interesting point. The content (which is canned Video on an Intranet Web site) is HTTP? I am wasting my time here by trying to use the Windows MP services?? Perhaps I already have what I need...
Your comments appreciated.
Kevin

Engine error HP LaserJet 100 color MFP M175 PCL6 wireless

Hi folks,
I would like to help with the "engine error" you're experiencing. I would like you to download the HP LaserJet Pro Series Firmware Update Utility. With this utility we can install a firmware update for the printer hardware. Please read all the steps below before clicking the above link. If you are using a mac operating system Click here instead.
Flash Firmware Update Notes:
The Firmware Update Utility uses the USB connection to the printer.
The HP LaserJet 100 color MFP M170 series print driver software must be installed prior to using this utility.
The HP LaserJet 100 color MFP M170 series printer must be on and in a READY state as shown by the LCD display on the control panel and remain powered on during the entire firmware update process.
Depending on the processor speed of your pc, the firmware update process may complete on the printer before the update status progress bar in the flash firmware update utility on the pc screen completes, this is normal.
Once the update process has started, do not use your pc for any other activity until the process is complete.
Do not power cycle the product or the pc until the firmware update process is complete
Steps to take :
1. Download the flash firmware updater file by clicking the appropriate link above. (The first link is for Windows operating systems and the second is for Mac)
2. Turn the printer off and then back on to clear main printer memory.
3. Double click on the file M170_colorMFP_Series_FW_Update-20111021.exe flash firmware update utility file. An HP firmware update window will open.
4. Select the appropriate HP M170 MFP series driver in the dialog window. If you assigned a different name to the HP M170 MFP, choose the name that represents the correct printer.
5. Click on ""Send Firmware"" when ready to proceed.
6. The progress bar will begin to move to the right indicating information being transferred.
7. DO NOT power cycle the product or the pc during this process or the product may become unstable and or unusable without further attention from HP. The flash firmware update can take up to 5 minutes to complete. Please be patient.
8. During the product flash firmware update, the display on the product control panel will display ""Printing Document- Erasing - Programming - Complete - Hewlett-Packard - Ready - Initializing - Ready"". Once the download is finished the printer will be in the Ready state.
9. At the conclusion of the firmware update, the dialog window will show a smiley face. Click on exit.
10. The flash firmware update process is complete
Please let me know if this resolves the issue and/or if you would like further assistance.
Sunshyn2005

After each print job I get the message on printer screen "Engine error press [OK]" It will print again only after pushing Ok button. Is there a fix? HP printers have not been that reliable, I 'm will not buy onother if this cannot be fixed.

How to get Alerts mail for adapter engine errors in SAP PI 7.0

Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.

Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed.

Windows installer engine error when installing LV 8.2.1

Trying to install LabView 8.2.1 on a system and getting a "Window Installer Engine" error and the program quits. The software successfully installed on another system.
I have disabled all other programs and virus scanners. Any suggestions?
Thank you,

I think I may have fixed my own problem and will try and list the steps here in case anyone else runs into this.
The computer is networked and we are running network licensing. I have admin priviledges also on this machine.
We had to have the administrator for the network log on (with the LV installation CD in the drive). The option was selected to install LV 8.2.1 and then a window appeared notifiying that the system was installing Service Pack 2.
The admin then logged out and I logged back in to my local accout (not my network username and passwor) and the installed worked correctly (whew!).
There were some other password issues whick I don't think were related to this problem.

Firefox gives "content encoding error" for multiple sites (mostly forums), however, wget can open those sites just fine

I am working under a corporate proxy server, so this might influence the problem. From home i can access the sites just fine. From here - it gives "content encoding error" on different kinds of forums. For example, http://www.freeallegiance.org/forums/index.php?act=home
I tried to download wget and could download the website htm file just fine!

I also have this problem. I believe it is caused by being connected through a proxy which is adding a second compression to the data. (I think IF uses gzip compression already).
Added details:
* Opera also works.
* I can view the IF admin section on FF
* I can view the forum if I go through a web proxy.

** File Content Conversion Error in Receiver CC - How to solve this?

Hi friends,
My target structure looks like below.
EmployeeJobDetails                                        --> Message Type
   JobCode                                                      --> Node
        EmployeeNumber            xsd:string
        Domain                           xsd:string
   JobTrack                                                     --> Node
         Department                    xsd: string
         Position                         xsd: string
I use the FCC parameters in the receiver CC as below:
Recordset Structure:    JobCode,JobTrack
JobCode.fieldSeparator = |
JobCode.endSeparator = 'nl'
JobTrack.fieldSeparator = |
JobTrack.endSepartor = 'nl'.
Because, we want the output like below
1099|Raja
Accts|JuniorAccountant
1100|Ram
HR|Recruiter
like this.
In this scenario Source is XML and target is txt file.
I am using XSLT Mapping. The FCC works fine, if my source input file contains some records. But, when we send empty source XML file as below
<?xml version="1.0" encoding="UTF-8"?>
<EMPLOYEE_DATA/>
Mapping works fine. Message is processed successfully in SXMB_MONI. The payload in response also comes with Message Type name like below
<EmployeeJobDetails    namespace >
</EmployeeJobDetails>
While convert this, the system throws below error.
Error Message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)'
Friend, how to convert this when source XML is empty.
But, if we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the same empty XML file FCC is working fine and we get the target text file 0 KB. (Amazing !!)
But, in the first case, how to solve the issue?
Kind Regards,
Jegathees P.

Hi friends,
If we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the <b>same empty XML file</b> FCC is working fine and<b> we get the target text file 0 KB</b>. (Amazing !!)
But, if we give parameters like JobCode,JobTrack then send pass the same empty file, we face the problem 'File Content Conversion' Error.
Searching solution for this problem ...

Content generation error. Failed to open the InDesign file.

Hey all -
In importing an article to a folio, I just received this error:
"Content generation error.
Failed to open the InDesign file. Please confirm the file can be opened in InDesign."
The file is open right now in InDesign. I can close it and reopen it with no errors.
I've tried resaving the article to a new file. No help.
I tried creating a new folio and importing the article there. No help.
All links are good. It's a simple file with images, a scrolling pane, and some buttons that link to other articles.
Anyone else run into this problem? Any solutions?
Thanks!

Im getting this error also....?
Want to avoid inporting each artical on at a time. Need to import multiple articals at once.
Thanks.

Content Engine errors.

Similar Messages

Maybe you are looking for