Content repository creation for SAP Content Server

Hi,
          I have installed Conteont Server 6.5 and Cache Server with Max DB 7.9.8.12 instance on windows server 2008  platform.Now connection to the content server with SAP Netweaver 7.4 on different host is established .When i am trying to create repository in Content Server Administration in application  SAP Netweaver 7.4 server an error is prompted as:
Can any one please suggest me a solution
regards
uday reddy

Hi Chandu,
Thanks for the reply,
I have tried the both commands mentioned in sap note 301352.It is showing results as
Error : The specified driver does not exist.
Please suggest me with a solution.
regards
uday reddy

Similar Messages

  • SAP Parameter Recommended  note for SAP Content Server 6.40

    Hi..
    we are planning to installation of SAP Content Server 6.40 with SAP MAXDB 7.6 on Solaris, Kindly provide what are the recommendation need to perform before installation  of Production system.
    Like IO Buffer Cache[MB] ,  Number of Sessions  or any SAP Parameter Recommended  note for SAP Content Server 6.40 with SAP MAXDB 7.6.
    Regards,
    Panu

    Hello,
    Did you already check the preparations and parameters in the SAP CS 6.40 installation guide ?
    You can find topics in the Installation Guide like :
      - Planning and Sizing of the Database Instance
      - Preparations
    For more in depth tuning also have a look at the following document :
    Operational Guide - SAP Content Server
    This document contains the complete list of Content Server parameters.
    Success.
    Wim

  • EWA reports for SAP Content Server

    Hi
    I have installed the SAP Content Server 6.40 on Solaris and MaxDB but my client want to configure EWA for  SAP Content Server.
    As per Content Server for EWA reports need to be configuring only Database and OS.
    Kindly suggest me what are the steps need to be performed to setup the EWA for Content Server.
    Regards,
    Panu

    Hi There
    In order to have EWA report for any system you need to meet some prerequisit , for detail please refer to
    this link below..
    http://service.sap.com/EWA   >> Media Library
    Best Regards
    Jai Wardhan

  • Slow content retrieval from content repository on Weblogic8.1 portal server

    The performance of content retrieval from content repository on Weblogic8.1 portal
    server is very slow. Image retrieval takes too much time. Is there any solution
    or workaround to improve the performance.

    More information is required to help you.
    What is the time for retrieval? What is the time for the entire page load?
    What database are you using?
    How many Nodes are in the repository?
    What do the Node types (a.k.a. Object Classes) look like? How many
    properties per Node?
    If using Oracle or MSSQL, did you run statistics.sql?
    (http://google.bea.com/search?restrict=wlp81&ie=&q=statistics.sql&site=bea&output=xml_no_dtd&client=bea&access=p&lr=&btnG.y=0&btnG.x=0&ip=216.148.48.12&proxystylesheet=http%3A%2F%2Fdev2dev.bea.com%2Fimages%2Fdev2dev.xsl&oe=&filter=p)
    Have you adjusted or disabled the content caches?
    Greg
    Koshy Varghese wrote:
    The performance of content retrieval from content repository on Weblogic8.1 portal
    server is very slow. Image retrieval takes too much time. Is there any solution
    or workaround to improve the performance.

  • How to create one more server node for SAP J2EE server?

    Hi,
    Can any one please suggest how to create one more server node for SAP J2EE server? I am using WAS700.
    Thanks and Regards,
    Smriti.

    Hai,
          Login into the Configtool(C:\usr\sap\SID\DVEBMGS<inst no>\j2ee\configtool) if ABAP+JAVA stack or C:\usr\sap\SID\JC<inst no>\j2ee\configtool) if JAVA stack
    click on the instance and and select the addserver button on the top to create a servernode for J2EE server.
    Thanks and Regards,

  • Steps to change IP address for SAP B1 server

    Dear Guru
    My company is going to change the IP address of SAP B1 server, because I am very new in this area, so pls clarify for me the following doubt
    1. May I change the IP address with the SAP B1 is running?
    2. If I need to stop the B1 services, how can I stop it? Stop at windows service level? or is there any console for me to stop the service like SAP R3?
    3. Do I need to stop the MSSQL service as well?
    4. Do I need to reboot the server before I startup the SAP B1 service?
    Regards
    Guodong

    Dear Guodong,
    Just assuming you have only one question since that is the forum rule.
    To change IP address for SAP B1 server, you need to Stop and restart the server to prevent the potential problem.  B1 is not the same as R/3, you have to stop all B1 related services.
    Thanks,
    Gordon

  • XI content for SAP SRM SERVER 6.0

    Hi All,
    I want to implement SRM-MDM CATALOG Business scenario, but i am not getting the XI content for Software Component  Version <b>SAP SRM SERVER 6.0</b>.
    Can anybody tell me from where to get the XI content for Software Component  Version <b>SAP SRM SERVER 6.0</b>.
    Helpful answers will be rewarded.
    Thanks,
    Shiv

    Hi Shiv,
    You can get the XI contents for SRM Server 6.0 under this URL:
    https://websmp107.sap-ag.de/swdc
    Support Packages and Patches -> SAP Application Components -> SAP SRM (WITH SAP EBP) -> SAP SRM 6.0 -> Entry by Component -> XI Content
    But for this, you requires a valid marketplace user-id and password.
    But according to my understanding, you can use the XI contents for SRM MDM Catalog 1.0 under SAP SRM 5.0 also.
    The file name is SRMMDMCAT1000_2-20001719.ZIP.
    Thanks

  • Content Repository creation issue in OAC0 tcode

    Dear All ,
    I installed Content Server 640 verison with Max DB 7.6 successfully on Windows Server 2008 R2 server.I did the the installation on the same server where my ECC development system is running.
    When I'm creating the content repository in OAC0 getting the below error.
    <<<<CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified, Error Code: 0>>>>
    I followed SAP Note 301352 - ODBC driver is not registered ,and used the below command to register ODBC driver but it gives me error saying Can't create registry value.
    C:\>odbcreg LiveCache -i -p f:\sapdb\programs\pgm
    Error : Can't create registry value.
    I did the installation using domain ID which is assigned to administrators group on local host.not able to figure it out ,whats the issue.
    Can you please help me to fix this issue please.
    thanks

    Hi Khaiser,
    You need to do the following,
    In CSADMIN got to setting.
    Add the parameter : Driver = MaxDB
    Restart the system and check it should work.
    Regards,
    Deepak Kori

  • Issue in transaction code creation for sap query report .

    Hi  Gurus,
    I have a requirement to create transaction codes for sap query reports. I found two ways to create transaction code for sap query report
    1) By Generating program for sap query report and creation of transaction code for that generated Program. in tcode.
    2) By using parameter transaction options in start object of se93
    What are the difference between creation of these two ways. Please specify  the advantages and disadvantages of both methods.
    Regards,
    Suneel Kumar Uggina.

    Hi Jogeswara Rao,
    But I am getting problem while transporting form development system to  the production system. After transporting to Production system  I have used the code created in development system, but it is giving Error ' No Program Found for that Transaction Code. And  I would like to know  on what conditions should I have to  use the First one  and as well as a second one in sap query reports.
    Thank You,
    Suneel Kumar Uggina.

  • Hardware requirements for SAP test server.

    Hi SAP Experts,
    We want to have a SAP test server for developing a prototype of SAP. Approx 12 users should be able to access this server
    concurrently.A industry specific solution (IS-Auto) also needs to installed over the standard SAP.
    Could you provide me the Hardware specifications required for this setup?.like the processor,ram,hard disk space ,etc...
    Awaiting your quick answers.
    Thanks and Regards,
    Umesh Karane.

    Hi Umesh. You need to read this http://service.sap.com/ides .Download  the documentation to that version which it is pleasant to you and in it there will be all corresponding information about hardware and e.t.c.
    Regards.

  • ASP creation for SAP systems on i5/OS

    Hi,
    We need to install CRM (abap), PI (abap+java), BW (abap), BW (java), Portal (java) in i5/os V5R4 in one LPAR.
    This existing LPAR is already having ECC Dev , QA and PRD.
    Now we will installal the above component in this existing LPAR where we have same one IP address and host name for all instances. Now I would like to know about ASP creation for these new systems.
    Can anybody suggest me how many ASPs need to create for these systems. If I install all system in one LPAR so what about the DB2 database for all instances. Wheter it will be MCOD for these instances?
    Or I need to create one ASP for each instance and each ASP will have seperate DB2 database
    Please suggest us what needs to be done for the above mentioned case
    Regards,
    Sudip

    Hi Sudip,
    there is no technical restriction to install all the systems you've listed into one LPAR. Even all in one ASP is possible. You should create seperate memory pools at least for the Java systems though.
    The classic MCOD approach is not supported on IBM i. But only because DB2 for i is MCOD by design so to speak. Each SAP system in the same LPAR creates its own database library to work with, no special setup needed.
    Having that said, there are good reasons to run certain systems seperate from others though. For instance BW systems have a different workload characteritics than ERP systems and this may cause resource conflicts. Have a look at the SAP on IBM i Reference Architecture document to get a first idea about landscape design considerations: SAP on DB2 for i
    Regards,
    Mirco

  • HP Enterprise Integration Module for SAP - Windows Server 2008

    Is there a download for the HP Enterprise Integration Module which will run on Windows Server 2008 for QC Version 10?  HP Support has directed me to SAP Support for the Integration Versino 2.5 and above.

    Hello John,
    now I have a resolution.
    I have deinstalled the MS SQL 2008 and install MS SQL 2005 plus SP2 at windows 2008 64bit VMware.
    After reinstall HP Quality Center everything works fine.
    ( SQL 2008 is not official supported )
    But there is another problem with the HP Enterprise Integration module 2.50 for SAP Solution Manager 7.0 EhP1,
    the installer has a problem and does not work at windows 2008.
    - this is a known HP problem and they should be published a newer version without the installer problem.
    Today (april 6) I can't find an update, takes a while ... the "bad" version "setup_win.exe" has 132.327 kb.
    you can only download the package from:
    http://update.external.hp.com/qualitycenter/qc100/ent/enterprise_integration/index.html
    you can find all add-ins at:
    http://update.external.hp.com/qualitycenter/qc100/index.html
    You should patch HP QC 10.00 with patch 10, see note 1329891 for details, takes 10 minutes or so.
    With reards,
    Michael

  • HTTP 401 error in CSADMIN for SAP content server on Linux OS and MaxDB

    Hi,
    We have installed content server on Linux OS.and DB as MaxDB.
    I created the repository using OAC0. The with same tab I went to CSADMIN.
    When I try to create repository with executing it , it ask for user name and password.
    I mentioned the SAPCS admin user name and password, but i got HTTP 401 error. Unauthorized user.
    Even i tried with prefixing domain name and with root user ID and password.
    But got the same error. Please help
    Regards,
    Hemant

    Hi
    We are also facing the same problem. but as you mentioned in solution.
    user: <domain>/<admin-user>
    pw: pw
    I am getting the same problem of Error 401. Kindly describe in detail with example.
    Thanks
    Regards,
    R Karthikeyan

  • Liscence for SAP Content Server

    Hello,
    Our client is using SAP ECC 6.0 system. They want to start using DMS. Content server is not installed. Do we need seperate liscence for Content server?
    Regards,
    Milind Dumbre

    Dear Milind,
    maybe you can find useful information on the SAP Service Marketplace under http://service.sap.com/contentserver.
    Best regards,
    Christoph

  • Which is the the iview for SAP Contents: Create User?

    hi,
    a)
    can somebody tell, how to access the EP create user iview?
    i need to link there from an own application.
    or better, which is the iview for the page: Create User?
    Right now the url properties of my "Create User view" is:
    http://myportal:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fadministrator!2fsuper_admin!2fsuper_admin_role!2fcom.sap.portal.user_administration!2fcom.sap.portal.user_management!2fcom.sap.portal.createNewUser?InitialNodeFirstLevel=true&windowId=WID1121850971390
    but i suppose this won't work, because of the genaerated Querystring ?InitialNodeFirstLevel=true&windowId=WID1121850971390
    is there an iview, which i might call via portal navigation
    b)
    is there a general way, how to access provided SAP stuff?
    thanx,
    matthias

    Hi Matthias,
    > the url properties of my "Create User view" is
    From this you can derivate the iView name, it's com.sap.portal.createNewUser. Searching within the PCD, this iView (independent of the super admin role) can be found under pcd:portal_content/com.sap.pct/admin.templates/iviews/com.sap.portal.createNewUser
    Checking this iView, the Code Link returns com.sap.portal.usermanagement.admin.CreateNewUser. This component is not creatable through "new iView from PAR" (for the reason see Browse deployment iview ).
    On the other hand, if you need the URL, just open the page, choose "Add to browser favorites" from the page options, and then you'll see the working URL within your IE favorites, in this case:
    http://myportal:50000/irj/portal?NavigationTarget=ROLES://portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_management/com.sap.portal.createNewUser
    Hope it helps
    Detlev

Maybe you are looking for

  • Font displayed problem

    Hello, I created a simple website http://gonzague.nuxit.net/norden/norden.swf with Flex but the display of the text on page "AVOCATS" shows both vertical and horizontal scrollbar. This occurs on some friends PCs, not on mine ! I guess it is because n

  • PowerBook 17"  window views do not stick.

    For several years I've set window view from Finder > View to List view then went on to view option and chose set for all windows. It stuck. The I installed three pieces of software. Two I have since removed. PocketMac for a Blackberry 8330 Phone sold

  • JDev10.1.2: Difference betwn same oracle.jbo.classes in different jar files

    Hello guys, does somebody knows the difference between these two JDeveloper 10.1.2 directories? JDEV_HOME/BC4J/lib JDEV_HOME/BC4J/jlib And more deeply, why are there different jar files both containing classes like oracle.jbo.domain.Number and oracle

  • HT4913 music not categorized in my library on ipad

    Suddenly a large amount of albums, artists, etc that were categorized and could be found searching by genres and by artists no longer appear in those categories and can only be found by searching by albums. This just happened the last time I synced a

  • Training in ORACLE FINANCIAL in New Delhi - uegent query

    Hi, I would like to know if there are any centres offering course in Oracle Financial in Delhi, India. What is the duration for the course and how much does it cost.What is the scope after course completion since I am new to Finance n ERP. I am curre