Content scope document library does not return result for non farm administrator

Hi
I have a situation where I had to go with a unique permission applied subsite to store 1000 documents in the document library. This site has a set of 50 users. I was able to create content scope and library path for search. It returns results for me(creator/owner/administrator)
however if I add other users as contributor or full permission, even after full crawling it does not return result for others.
I saw some article that security broken site wont be indexed normal way and to include and I did that as well but no result for other users. I always get result.
Please suggest if there are any specific security permissions that I need to include, so the document library target search will return result for others.
Thanks
Shri

Hi Shri,
For administrator search results, it looks like the documents could be crawled and searched.
For other users you grant full control permission on subsite with unique permission where you store 1000 dcouments in document library, please make sure these 50 users have access permission(at least view permission) on documents from the
library, then test again.
Also test if users search on search center site without search scope, see if it's scope issue or search web part issue.
If above doesn't work, please check ULS log for related useful information around the time when users search the documents, there should be more info to verify if issue is related to unique permision.
Thanks,
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

  • CQWP does not return result for a specific query when filtering on a managed metadata field.

    Hi,
    We are facing a serious production issue. We've search the web extensively but to no avail.
    Problem:
    CQWP does not return result for a specific query when filtering on a managed metadata field.
    ULS log:
    The Uls logs provides 3 different messages that I could relate to every time the query is executed. The last item(level Medium) is displayed 14 times. For readability I've moved the ULS logs to the bottom of this question.
    Query:
    The query is as follows:
    (I've translated this from dutch so pardon any typo's)
    Query: (top selection) Display items from all sites in the site collection
    ListType: Documentlibrary
    Contenttype:
    Items from this group:Custom Document Contenttypes
    Items from this content type: Verklaring
    Filter: Soort is equal to X
    extra info: the field soort (Type) is a managed metadata field that was assigned the value X
    Managed Metadata Structure:
    -managed metadata service
      -Contoso
        -Enterprise Taxonomy (term set)
          -Document (term)
            -Verklaring (term)
              -Soort (term)
                -x (term)
    EXTRA INFO:
    When I modify the filter to filter on Title the CQWP DOES return the correct document!
    When I modify the query settings to search a specific library the CWQP also does return the correct document! (In this case I am filtering on a managed metadata field).
    QUESTION:
    Why doesn't the CQWP return the document when filtering on a managed metadata field over the entire site collection.
    Why does the CQWP return the document when filtering on a managed metadata field over a single library.
    (The type of information the CQWP should return (Soort:x) is stored in a dozen document libraries!)
    Here are the ULS logs.
    Product: Web Content Management
    Category Publishing
    Level: Monitorable:
    CrossListQueryCache::GetSiteData() caught exception (Microsoft.SharePoint.SPException: Kan deze actie niet voltooien.  Probeer het opnieuw. ---> System.Runtime.InteropServices.COMException (0x80004005): Kan deze actie niet voltooien.  Probeer
    het opnieuw.     bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)    
    bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     --- Einde van intern uitzonderingsstackpad
    ---     bij Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)     bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery,
    ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query)     bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery
    siteDataQuery, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid)    
    bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList)) for query:  '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}"
    Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}" Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True"
    Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True" Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef
    ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}"
    Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}" Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True"
    Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True" Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef
    ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}"
    Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef
    Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef
    Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
    LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True"
    Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' at url: /. Titel webonderdeel: Inhoudsquery
    Product: Web Content Management
    Category Publishing
    Level: Warning
    Error occured while processing a Content Query Web Part. Performing the following query '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}" Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}"
    Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True" Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True"
    Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef
    ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}" Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}"
    Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True" Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True"
    Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef
    ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}" Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
    Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists
    ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value
    Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef
    ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' generated the following error: Kan deze actie niet voltooien.  Probeer het opnieuw.
    at the following url: /. Titel webonderdeel: Inhoudsquery
    Kan deze actie niet voltooien. Probeer het opnieuw. This is Dutch. It means something like: Cannot complete this action. Please try again.
    Product: Web Content Management
    Category Publishing
    Level: Medium (this message is displayed 14 times)
    ConsoleUtilies.GetContextualControlMode had no currentPage so the current SPWebPartManager mode cannot be retrieved.

    Hi,
    while digging through the logging (again) I found some extra logging regarding the same correlation id (see details below).
    We have a fairly large term store (4000+ lines).
    If somebody has a clue or tip that would greatly appreciated!
    03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa42 Monitorable A large block of literal text was sent to sql.  This can result in blocking in sql and excessive memory use on the front
    end.  Verify that no binary parameters are being passed as literals, and consider breaking up batches into smaller components.  If this request is for a SharePoint list or list item, you may be able to resolve this by reducing the number of fields. 1971313a-6baa-49e9-bace-d024ce67f25c
    03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa43 High Slow Query Duration: 127.1515 1971313a-6baa-49e9-bace-d024ce67f25c
    03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa44 High Slow Query StackTrace-Managed:    bij Microsoft.SharePoint.Utilities.SqlSession.OnPostExecuteCommand(SqlCommand command,
    SqlQueryData monitoringData)     bij Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock)     bij Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean
    retryfordeadlock)     bij Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock)     bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String
    bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter
    pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query)     bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery siteDataQuery, Boolean
    useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea
    cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea ca, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(SPSite
    site, String webUrl, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.IssueQuery()     bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.GetXPathNavigator(String
    viewPath)     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform)     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PerformSelect()    
    bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.DataBind()     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.EnsureDataBound()     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.CreateChildControls()    
    bij System.Web.UI.Control.EnsureChildControls()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()    
    bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     bij System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     bij System.Web.UI.Page.ProcessRequest()    
    bij System.Web.UI.Page.ProcessRequest(HttpContext context)     bij ASP.BLANKWEBPARTPAGE_ASPX_1653093133.ProcessRequest(HttpContext context)     bij Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext
    context)     bij System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     bij System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)    
    bij System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     bij System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)     bij System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest
    wr, HttpContext context)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
    managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32
    flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 1971313a-6baa-49e9-bace-d024ce67f25c

  • Team Site default site assets library does not have support for video, images, etc..

    Greetings,
    Our users have noticed that when they create a new subsite that the default site assets library does not give them the option to create a new document type of video, image, etc.. just a word document.
    If I create a new asset library I do see all the options when creating a new file from the drop down menu under the ribbon >files>new document
    Is this default behavior when creating a new team site or is there something that I can configure so that the default site assets library that is built is really a site assets library and not a standard document library?

    i think you are talking about the "Site Assets" Library and this is not meant for the Asset Library.Yes this is default behavior.
    Site Assets: Use this library to store files which are included on pages within this site, such
    as images on Wiki pages. jsut think about the other OOTB libraries i.e Style, Pages libraries etc.
    Assets Library is the one you need to add in your site collection to take the advantage of it.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Subcontract PO/PR does not generate PR for non stock component

    Hello,
    I need help on above topic.
    SAP Version is ERP Central Component 5.0.
    My problem is that PR is not being generated for non stock component in PR/PO of higher/parent material.
    I notice that in component overview screen the item cat for this non stk comp. has changed to T( text item) even though the BOm has been maintained with item cat as N( non stock). The material type being used for non stk material is custom developed(copy of NLAG).
    Has anyone faced similar issue. or can suggest some missing customization (if any)
    Just to confirm :
    I have done customising for Direct procurement in OPPQ to trigger PR  in requirements planning. Also tried with prod order creation option(though my case is PO creation)
    Any help from forum is highly appreciated.
    Thanks,
    Ram

    Hi ,
    Commitement check is taking place due to availability control. If u dont want to carry out AVAC for PR then in Tolerance limit put the exclude the check for PR.
    SPRO > PS > Budget > define tolerence limit > here u might selected ++ i.e. for all activity type. U select indidula transaction grp excluding PR.
    Rgds

  • SharePoint 2010: Ribbon on document library does not load

    Hello,
    I have a user where on some sites that he uses the document library fails to load. We are on SharePoint 2010, Enterprise Edition. The problem is just on his Windows 7 PC, and no others have reported the problem. He is using IE 10.
    Can you give me some possible things to try to fix the issue?
    Thanks
    Paul

    Will you also please describe how it fails to load? Do you get an HTTP error/"This page cannot be displayed"? Does it not show up, the "unexpected error" error?
    Jason Warren
    Infrastructure Architect
    Habanero Consulting Group
    habaneroconsulting.com/Insights
    @jaspnwarren

  • Query.cmd  -s -c -l "select * from ' cachename '" does not return results

    We are working with coherence 3.6.1 on RH5 server. We are connecting to the grid and are able to query a cache through the command line. However, when we attempt to query a cache utilizing the following command, we receiving only the CohQL prompt:
    query.cmd -s -c -l "select * from '<a cache>'"
    This works on the UNIX side with the query.sh command.
    Additionally:
    redirect to a file = same issue
    input from a file = same issues
    input from a file, redirect to a file = same issue
    etc....
    The examples are OK, it just does not work as expected.
    Thanks!!!

    We have been able to get the file input to file output to work
    query.cmd -s -t -f < myinputfile -f > myoutputfile
    still cannont get the
    query.cmd -l "select * from 'mycache'" to work

  • Ribbon on document library does not load

    I am logged on as a Site Collection Admin and using IE 9.0.8112.16421 on Windows 7 SP1 and when I go to a list, I get "Loading..." and I have closed out, restarted, and tried to log on as a different user, when I do, it WORKS!
    I set that user to be a Site Collection Admin, on same system, my system, multiple sites are affected.  I just tried Calendars List and that seems to work OK, however Announcements, Custom Lists, Links List, etc. seem to be having the same "issue."
    I read someone to try to use Developer Dashboard so I put it in here.  Is it COMMON to have SO MANY SPWeb's in the list below?
    I tried to go to the site and click refresh and then click on the List Tab, and try to get the ULS log results, this is what I got, and I don't know if it is "EVERYTHING" but others are using the site and a lot goes on and so I don't know if this
    overlaps. This is all I got with the correlation ID.
    "05/09/2014 09:50:52.51 w3wp.exe (0x10B4) 0x1AB0 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://sharepoint:80/DepartmentSites/Subsite/Subsite1/Lists/Announcements1/AllItems.aspx)) "
    "05/09/2014 09:50:52.51 w3wp.exe (0x10B4) 0x1AB0 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://sharepoint:80/DepartmentSites/Subsite/Subsite1/Lists/Announcements1/AllItems.aspx) e542f2bf-ba9b-4aa7-b57d-df01fbf9b3cf"
    "05/09/2014 09:50:52.54 w3wp.exe (0x10B4) 0x1AB0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (GetFileAndMetaInfo). Execution Time=24.1441300500483 e542f2bf-ba9b-4aa7-b57d-df01fbf9b3cf"
    "05/09/2014 09:50:52.54 w3wp.exe (0x10B4) 0x1AB0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (GetWebPartPageContent). Execution Time=24.4288031020702 e542f2bf-ba9b-4aa7-b57d-df01fbf9b3cf"
    "05/09/2014 09:50:52.54 w3wp.exe (0x10B4) 0x1AB0 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ e542f2bf-ba9b-4aa7-b57d-df01fbf9b3cf"
    "05/09/2014 09:50:52.54 w3wp.exe (0x10B4) 0x1AB0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=26.041019179812 e542f2bf-ba9b-4aa7-b57d-df01fbf9b3cf"
    "05/09/2014 09:50:52.71 OWSTIMER.EXE (0x21EC) 0x2380 SharePoint Foundation Topology 8xqz Medium Updating SPPersistedObject TopologyCommitJobStatus. Version: 4328189 Ensure: False"
    Developer Dashboard
    Request
    (GET:http://sharepoint:80/Lists/DesktopBuilds/SimpleView.aspx) (2269.38
    ms)
    BeginRequestHandler (0.07 ms)
    PostAuthenticateRequestHandler (0.09 ms)
    PostResolveRequestCacheHandler (107.16 ms)
    GetWebPartPageContent (105.08 ms)
    GetFileAndMetaInfo (104.66 ms)
    GetWebPartPageContent (20.39 ms)
    GetFileAndMetaInfo (20.04 ms)
    PortalSiteMapDataSource: Determining Starting Node (0.02 ms)
    PortalSiteMapDataSource: Determining Starting Node#1 (0.01 ms)
    Add WebParts (41.38 ms)
    Desktop-Builds (41.03 ms)
    ToolBarMenuButton.CreateChildControls for SiteActions (0.40
    ms)
    EnsureListItemsData (18.92 ms)
    ToolBarMenuButton.CreateChildControls for PersonalActions (0.18
    ms)
    ToolBarMenuButton.CreateChildControls for ListTitleViewSelectorMenu (0.25
    ms)
    SearchBoxEx.OnLoad (0.80 ms)
    SearchCommon::GetSearchDropDownDisplayGroupName (0.13 ms)
    SearchCommon::GetSiteCollectionLanguage (0.02 ms)
    SearchBoxEx.HandleContextualScoping (0.15 ms)
    SearchBoxEx.GetSpWeb (0.01 ms)
    Activate web part connections (0.04 ms)
    DataBinding DataFormWebPart (Desktop-Builds) (21.57 ms)
    Parse CAML XML (0.11 ms)
    EnsureListItemsData (17.48 ms)
    ToolBarMenuButton.CreateChildControls for NewMenu (0.15 ms)
    ToolBarMenuButton.CreateChildControls for ActionsMenu (0.27
    ms)
    ToolBarMenuButton.CreateChildControls for SettingsMenu (0.13
    ms)
    ToolBarMenuButton.CreateChildControls for ViewSelectorMenu (0.24
    ms)
    EnsureListItemsData#1 (19.38 ms)
    JsonUndeclareRecord.GetDeclareRecordInfo (0.04 ms)
    Render Ribbon. (4.81 ms)
    Render WebPart Zone Main (6.95 ms)
    Render WebPart Desktop-Builds (6.82 ms)
    Xslt Transform (3.01 ms)
    Web Server
    Execution
    Time
    2269.71
    ms
    Current
    User
    Page
    Checkout Level
    Published
    Current
    SharePoint Operations
    1
    Log
    Correlation Id
    a16cfd29-82d3-4a94-8add-a64ed75a72e5
    Asserts and Critical Events
    Database Queries
    proc_FetchDocForHttpGet
    18.77
    ms
    EXEC proc_AddAuditEntry
    84.64
    ms
    proc_FetchDocForHttpGet
    18.23
    ms
    proc_GetTpWebMetaDataAndListMetaData
    9.20
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.12
    ms
    proc_GetAllRolesForUser
    6.51
    ms
    proc_SecGetRoleDefs
    4.99
    ms
    proc_EnumLists' CommandType:
    22.80
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.31
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.71
    ms
    proc_MapUrlToListAndView
    4.20
    ms
    proc_GetListMetaDataAndEventReceivers
    6.70
    ms
    proc_GetListWebParts
    6.04
    ms
    DECLARE @DocParentIdForRF
    12.45
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.39
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.43
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.50
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.30
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.39
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.36
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.62
    ms
    proc_GetTpWebMetaDataAndListMetaData
    9.12
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.97
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.67
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.55
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.62
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.40
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.41
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.39
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.48
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.29
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.38
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.57
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.35
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.18
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.11
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.03
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.25
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.15
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.18
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.25
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.21
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.12
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.15
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.48
    ms
    proc_GetTpWebMetaDataAndListMetaData
    8.53
    ms
    proc_GetTpWebMetaDataAndListMetaData
    9.51
    ms
    proc_GetTpWebMetaDataAndListMetaData
    9.58
    ms
    proc_GetTpWebMetaDataAndListMetaData
    9.72
    ms
    proc_GetTpWebMetaDataAndListMetaData
    9.68
    ms
    Service Calls
    SPRequest Allocations
    SPWeb:
    http://sharepoint/Lists/DesktopBuilds/SimpleView.aspx
    SPWeb:
    http://sharepoint/_catalogs/masterpage/v4.master
    SPWeb:
    http://sharepoint/Lists/DesktopBuilds/SimpleView.aspx
    SPWeb: http://sharepoint/
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint/Lists/Bamboo Navigators/Navigators
    View.aspx
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint/
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint/
    SPWeb: http://sharepoint/
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    SPWeb: http://sharepoint
    WebPart Events Offsets
    SPWebPartManager OnLoad
    +0.00 ms
    Desktop-Builds OnLoad
    +0.10 ms
    SPWebPartManager OnPreRender
    +0.00 ms
    Desktop-Builds OnPreRender
    +41.20 ms

    I only have one WFE and APP server on the same box, and another server, as the SQL Server.
    2 node farm.
    I just stood up another Web APP
    http://sharepoint:343 port and using domain\sitecollectionadmin account is the same one I use, my administrator account, not my Matthew.Carter user account, but my Administrator.MC account.  so I am logged as domain\Admin.MC
    and so I am on port sp:80 and I get the "ribbon" loading... and then I go to a brand new "Team Site" site, NOTHING changed, just out of the box, "new team site" and I get the SAME THING! but this is on port :343 (random port #). 
    Just odd.  If I set my matthew.carter account to be a site collection admin, as the admin.mc account is, then I can do the same thing logging on with the "Sign in as a different user."  it's strange!  Why would one account, with same
    permissions get "stuck" "Loading..." and the other one, NOT?  Only happening on that account.
    Think I should bit the bullet, and ask to have that account deleted and added again?  Just wonder what I can check as no "error's."
    I forgot to add that I have rebooted the WIndows 7 x64 SP1, IE9 (x86) system I am on and closed out and tried "InPrivate" and not.
    Just tried it on a dev Server 2012 R1 box on IE 10 x86 and got same "Loading" error with the admin.mc account.

  • Oracle Text does not return results when String starts with two consecutive vowels

    Hi,
    I hope someone can shed some light on a strange problem we're facing.
    Oracle Database 11g R2 (11.2.0.4) EE 64-bit running on Windows 2008 Server R2.
    When I create a context index on a varchar2 column (surname) it works fine when the surname starts with either a consonant or one vowel. But when the surname starts with two vowels it fails to return the record?
    Please see worked example below:
    create table t1 (surname varchar2(50));
    insert into t1 values ('OURS');
    insert into t1 values ('JOURS');
    insert into t1 values ('ONES');
    commit;
    -- sync every 10 mins
    CREATE INDEX PERSON_SURNAME_IDX ON t1
    (SURNAME)
    INDEXTYPE IS CTXSYS.CONTEXT
    PARAMETERS('MEMORY 50M sync (every "SYSDATE+10/1440")')
    NOPARALLEL;
    -- no rows
    SELECT surname
    FROM t1
    WHERE CONTAINS(surname, 'OURS') > 0;
    -- 1 row
    SELECT surname
    FROM t1
    WHERE CONTAINS(surname, 'JOURS') > 0;
    -- 1 row
    SELECT surname
    FROM t1
    WHERE CONTAINS(surname, 'ONES') > 0;
    Any help or guidance greatly appreciated.
    Thanks,

    Wtf?
    https://docs.oracle.com/database/121/CCREF/astopsup.htm#i634475
    only     then     where
    all     do     into     onto     there     whether
    almost     does     is     or     therefore     which
    also     either     it     our     these     while
    although     for     its     ours
    select
    from v$version
    Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production    0
    PL/SQL Release 12.1.0.2.0 - Production
    CORE 12.1.0.2.0 Production
    TNS for Linux: Version 12.1.0.2.0 - Production
    NLSRTL Version 12.1.0.2.0 - Production
    SELECT spw_stoplist, spw_word FROM ctx_stopwords
    WHERE spw_stoplist ='DEFAULT_STOPLIST'
    order by nlssort(spw_word, 'NLS_SORT=LATIN')
    ---- snip ----
    DEFAULT_STOPLIST    not
    DEFAULT_STOPLIST    of
    DEFAULT_STOPLIST    on
    DEFAULT_STOPLIST    one
    DEFAULT_STOPLIST    only
    DEFAULT_STOPLIST    or
    DEFAULT_STOPLIST    other
    DEFAULT_STOPLIST    out
    DEFAULT_STOPLIST    over
    DEFAULT_STOPLIST    s
    ---- snip ----

  • Get-csRgsWorkFlow command does not return result if you are using remote shell

    I am connecting to Lync server remotely using windows powshell.
    When I issue the command locally from the Lync server, I get the correct response. When I do the same command from the remote shell, I get empty response.
    Can you help me why this is happening?

    Have you checked RBAC? 
    "The Get-CsRgsWorkflow cmdlet
    provides a way for you to return information about the workflows configured for use in your organization.
    Who can run this cmdlet: By default, members of the following groups are authorized to run the Get-CsRgsWorkflow cmdlet locally: RTCUniversalServerAdmins. To return a list of all the role-based access control (RBAC) roles this cmdlet
    has been assigned to (including any custom RBAC roles you have created yourself), run the following command from the Windows PowerShell prompt:
    Get-CsAdminRole | Where-Object {$_.Cmdlets –match "Get-CsRgsWorkflow"}
    " - http://technet.microsoft.com/en-us/library/gg425766(v=ocs.14).aspx
    Please mark posts as answers/helpful if it answers your question.
    Blog
    Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

  • Subsequence does not return result

    I want to have a subsequence return a pass or fail result to the main sequence.  I read on the forums to make a pass/fail test in the subsequence and I set that step to cause the sequence to fail.  I set a breakpoint and can see that that step is failing.  I set another breakpoint after the call to the subsequence in the main sequence and that step always passes.
    How do I do this properly? I can't seem to find any good documentation on the subject.
    I have tested this in 3.5, 4.0, and 4.0.1.  The attached sequences were made in 3.5.
    Attachments:
    seq1.seq ‏49 KB
    subseq1.seq ‏30 KB

    Hi Andrew,
    When i closed my TestStand the system asked me so save NI-Types!! That means your Types differs from that which are shipped from NI.
    Maybe you will get some problems with typeconflicts in future.
    For all other users here in this forum be careful when loading the upper or my example. NEVER accept savings to NI-Steptypes !!!!!
    Refer to this Site: type conflict error when using TS_EngineGetSeqFile link: http://forums.ni.com/ni/board/message?board.id=330&message.id=17427#M17427
    greetings from the lake of Constance, Germany
    and get never affected by a type virus
    juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • Visual Studio profiler does not show results for XAML + DirectX project

    The case is simple: 
    1) The solution consists of 3 projects:  2 C# ones  (C# XAML project + C# library project) and one C++ runtime component initially created by the wizard, as this is a DirectX project.
    2) "Start Windows Phone application analysis"  runs OK, but when stopped  no profiling results are shown. The message is "0 total samples collected", "No call tree data is available".
    How can this problem be fixed?  What are the assumed reasons?

    (I know the thread is old - but I have found some threads on the net asking about this problem, but nowhere answered, so I'll rectify this here)
    Hey,
    do you happen to have been profiling the *release build* ?
    If so, try this:
    In solution explorer, right-click on the native C++ project -> Properties -> Configuration Properties -> Linker -> Debugging
    The top-most field "Generate Debugging Info" is probabyl empty, which is default for release build. But debugging info is needed to sample-profile functions! So select "Yes" there, and make sure the next option, "generate program
    database file" has a sensible entry.
    For me, this did it.

  • MapViewer.getGeneratedImaegURL() does not return https for SSL mapviewers

    We've setup a SSL mapviewer with an https:// URI but MapViewer.getGeneratedMapImageURL returns http://uri:7002 instead of https://uri:7002
    This is easy enough to fix by testing if the getServiceURL starts with "https" and testing the start of getGeneratedMapURL and then replacing the "http:" with "https:" but it's a bug so we're reporting it here.
    Thanks, Mark

    Hi Mark,
    thanks for your note. We will look it.
    Joao

  • Find an item not returning results in SharePoint calendar list

    Environment: SharePoint 2013 upgraded to SP1. We have 1000s of team sites that have been upgraded from 2010 to 2013. In the lists in these sites, quite often I encounter that
    Find an item does not return results for certain fields other than the title field. For example, we have a calendar list which has a Single Line of Text field. I can not get meaningful results searching on
    this field.  I have tried this, no luck:
    http://www.enjoysharepoint.com/Articles/Details/sharepoint-2013-find-an-item-search-box-does-not-return-20956.aspx
    Search service crawls incremental every hour. I hope this does not need a full crawl.
    Thanks, Soumya | MCITP, SharePoint 2010

    Thanks Ganesh. All these settings are as you recommended it to be. Nonetheless I double checked and here are the results:
    Ensure in the Search Service Application that the Web Application is included in the Content Source under SharePoint Start Addresses.
    Yes. Please remember we are getting search results. To be specific we are not getting Find items in the list to be returning accurate results.
    Make sure that the address in Alternate access mappings default text box is same as the start crawl address in the search service application.
    Yes.
    List Setting - Allow items from this list to appear in search results? yes
    Ensured
    set “Require content approval for submitted item?” to “No”.
    It is set to "No". However, will it not work for approved contents also?
    Thanks, Soumya | MCITP, SharePoint 2010

  • Ctxrule - match does not return expected result

    v.11.1.07 - I have created a ctxrule index as detailed below. However, although a query should match on the given document, it does not return. Any ideas?
    begin
    ctx_ddl.create_preference('ot_lexer', 'basic_lexer');
    ctx_ddl.set_attribute('ot_lexer', 'index_stems', 'ENGLOSH');
    end;
    begin
    ctx_ddl.create_section_group('ot_sec_group', 'auto_section_group');
    end;
    create table ot_profile_test
    (profile_id number,
    query clob);
    create index ot_profile_rule_ndx on ot_profile_test(query)
    indextype is ctxsys.ctxrule parameters
    ('stoplist ctxsys.empty_stoplist
    section group ot_sec_group
    lexer ot_lexer');
    insert into ot_profile_test values(1, '($apple and $pear) and (1 within food)');
    commit;
    exec ctxsys.ctx_adm.set_parameter('log_directory', '/yourdir');
    exec ctx_output.start_log('ot');
    exec ctx_output.add_event(ctx_output.event_index_print_rowid);
    exec ctx_output.add_event(ctx_output.event_index_print_token);
    exec ctx_ddl.sync_index('ot_profile_rule_ndx', '2040M', null, 1, null, ctx_ddl.lock_nowait_error);
    exec ctx_output.end_log;Then, run a query:
    declare
    a clob := 'apple orange pears banana
    <metadata>
    <indicators>
       <food>1</food>
    </indicators>
    </metadata>
    vn_profile_id number;
    begin
    select profile_id into vn_profile_id
    from ot_profile_test
    where matches(query, a) > 0;
    dbms_output.put_line(vn_profile_id);
    end;
    ERROR at line 1:
    ORA-01403: no data found
    ORA-06512: at line 8Shouldn't profile_id = 1 be returned?
    Also, shouldn't the logfile have 2 rows written to $I?
    WRITING TOKEN APPLE:((PEAR) = (PEARS)) * ((1) WITHIN FOOD),0
    WRITING TOKEN APPLES:((PEAR) = (PEARS)) * ((1) WITHIN FOOD),0

    You need to use a basic_wordlist instead of a basic_lexer and ENGLISH instead of ENGLOSH in order to use stemming and your clob (variable a) must be valid html or xml in order to search within sections. Please see the simplified demonstration below.
    SCOTT@orcl_11gR2> begin
      2    ctx_ddl.create_preference ('ot_wordlist', 'basic_wordlist');
      3    ctx_ddl.set_attribute ('ot_wordlist', 'stemmer', 'ENGLISH');
      4    ctx_ddl.create_section_group ('ot_sec_group', 'auto_section_group');
      5  end;
      6  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> create table ot_profile_test
      2    (profile_id  number,
      3       query         clob)
      4  /
    Table created.
    SCOTT@orcl_11gR2> create index ot_profile_rule_ndx
      2  on ot_profile_test (query)
      3  indextype is ctxsys.ctxrule
      4  parameters
      5    ('stoplist     ctxsys.empty_stoplist
      6        wordlist     ot_wordlist
      7        section group     ot_sec_group')
      8  /
    Index created.
    SCOTT@orcl_11gR2> insert into ot_profile_test values
      2    (1, '($apple and $pear) and (1 within food)')
      3  /
    1 row created.
    SCOTT@orcl_11gR2> commit
      2  /
    Commit complete.
    SCOTT@orcl_11gR2> exec ctx_ddl.sync_index ('ot_profile_rule_ndx')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> declare
      2    a clob :=
      3        '<table>
      4           <fruits>apple orange pears banana</fruits>
      5           <metadata>
      6             <indicators>
      7            <food>1</food>
      8             </indicators>
      9           </metadata>
    10         </table>';
    11  begin
    12    for r in
    13        (select profile_id
    14         from      ot_profile_test
    15         where  matches (query, a) > 0
    16         order  by profile_id)
    17    loop
    18        dbms_output.put_line (r.profile_id);
    19    end loop;
    20  end;
    21  /
    1
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2>

  • OCIStmtExecute does not return immediately when client is busy.

    Hi.
    I'm testing a very busy multi-threaded client server that consistently generates
    a large number of simple queries through oci. The problem is that, when the
    server(client) is busy, OCIStmtExecute does not return immediately in
    non-blocking mode.
    Of course I have set non-blocking mode and OCIStmtExecute does return
    OCI_STILL_EXECUTING immediately when the server is not busy. But
    when log rotation occurs which concatenates a large text file (~500MB)
    onto an even larger text file (up to several giga bytes), or when I simply copies
    or concatenates large text files manually, OCIStmtExecute returns very slowly.
    (roughly about after 100~200ms)
    However, while log rotation takes place, everything else including other oci
    calls that come before OCIStmtExecute (prepare, define) return fast. So
    for me it really seems that only OCIStmtExecute becomes extremely slower
    when local server (especially the disk) is busy.
    Is there any way to let OCIStmtExecute immediately return all the time?
    Thanks in advance.

    Yes, I knew that OCIStmtExecute would be the only function that causes such
    delay and that was why I traced that call. And so far, I checked several times
    what happens at the exact moment on the server but everything was ok.
    Actually OCIStmtExecute becomes slower exactly when crontab-ed log rotate
    occurs so I think this delay must be a client-side problem for now.
    This server is quite busy and has to respond fast, so it is important to
    guarantee fast response time while a small number of timeout losses are tolerable.
    But as OCIStmtExecutes' first OCI_STILL_EXECUTING return takes hundreds of
    ms it has become more like a blocking call and currently I cannot find any way to do what I want.
    So now everytime such thing happens, the thread waits
    quite long, after the first OCI_STILL_EXECUTING return
    the time difference exceeds timeout limit, and the thread
    calls OCIBreak() and OCIReset() and returns.

Maybe you are looking for

  • Song information appears different in itunes library

    generally go to FILE- ADD FOLDER TO LIBRAY , and import all songs from my hard drive into itunes , but the format of track names appear differently in the itunes track name area 1 - some of my track names are very long. When i copy into itunes librar

  • F110 bill of exchange: error FZ731 "...requires payment before due date"

    Hi everybody. I'm facing an issue that is driving me crazy <:-) I want to configure a payment method of type "bill of exchange" (in Spain, "pagaré"). I have several due invoices (due dates: 30/11/10, 31/12/10...), which have this payment method. Some

  • Unable to copy and paste code or text in the post

    hi  i am unable to copy or paste the code or text from my notepad/word to this editor when i am trying post questions  etc. is this feature blocked my MS ? If i add a html code windows , i am able to paste the  code and text. can anyone pls confirm w

  • Obj PageContext null in a Custom Tag

    Hi Every body I'm Mauricio and my problem is : I did a Custom tag and when I invoke it the PageContext object in the tag is null, I don't know why. Any suggestion about the reason of this problem, will be a great help. The source of Custom tag is : p

  • Apple Mail font colour issue

    Wanted to know if anyone else was having this same font annomaly? When in Mail, if I ever need to change my text colour to black through the "Click to choose text color" toolbar option (for example if I have copied text that was in a different colour