Content Server 6 WebDAV Access
Has anybody gotten the WebDAV functionality in Content Server 6 to work?
When I go to new->Web Folder, I get the pop up with my logon information and the URL:
http://portal-server/portal/server.pt/auth/gateway/PTARGS_32_1_572_-1_0_43/http;/content-server;8080/ptcs/WebDAV
However, when I try to add this as a new Network Place in Windows Explorer, I only get a message that thsi is an invalid folder. When trying without the gateway prefix (only the content server address), I get a login prompt, at which I cannot login with my credentials.
Has anybody gotten the WebDAV functionality in Content Server 6 to work?
When I go to new->Web Folder, I get the pop up with my logon information and the URL:
http://portal-server/portal/server.pt/auth/gateway/PTARGS_32_1_572_-1_0_43/http;/content-server;8080/ptcs/WebDAV
However, when I try to add this as a new Network Place in Windows Explorer, I only get a message that thsi is an invalid folder. When trying without the gateway prefix (only the content server address), I get a login prompt, at which I cannot login with my credentials.
Similar Messages
-
Sap Content server Direct Browser Access - docGet
We use SAP Content Server for DMS doc storage. Docs are stored without digital signing.
I am looking to access dms original files directly via web browser using the "docGet" command.
My url looks as shown:
http://pswdf009:1080/ContentServer/ContentServer.dll?docGet&pVersion=0045&contRep=K1&docId=361A524A3ECB5459E0000800099245EC
When I call the url, browser does not seem to be able to read the file type of the server response. An "open/save" dialog appears and when "open" is selected a subsequent dialog appears asking which application to use to open the file. Once the correct application is chosen, the document is displayed correctly.
Is there some way to instruct the browser the content-type is application/pdf?
Will CSAdmin parameter changes have any impact?
The browser is Internet Explorer 6.
Any help is appreciated.
RogerHi Roger,
you may of course find an answer here.
But mySAP PLM DMS is not a focus topic here (besides maybe connecting it into the SAP Portal and KM). Thus, you may be better off using a contact or a message to PLM.
Regards, Karsten -
Problem with Content Server 4 keystore access on Ubuntu 8.04
Hello,
Setting up the Content Server I encounter this problem with the fulfillment server Status check-up:
exception
javax.servlet.ServletException: Servlet execution threw an exception
root cause
java.lang.Error: Problem reading key and certificate from keystore
com.adobe.adept.fulfillment.security.ServerConfig.init(ServerConfig.java:201)
com.adobe.adept.fulfillment.security.ServerConfig.getSigningURL(ServerConfig.java:48)
com.adobe.adept.fulfillment.servlet.FulfillmentServerStatus.getServers(FulfillmentServerStatus.java:34)
com.adobe.adept.common.servlet.Status.checkUp(Status.java:355)
com.adobe.adept.common.servlet.Status.doGet(Status.java:421)
javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
I've created operator.p12 according to the instructions in the Quickstart guide
and placed it in /etc where it is accessible by the server. I used OpenSSL 0.9.8k
for this.
I can use "openssl pkcs12 -in operator.p12 -out file.pem" to view the contents of
the file.
My Content Server fulfillment configuration is as follows:
com.adobe.adept.init1=com.adobe.adept.shared.util.SharedInitialization
com.adobe.adept.log.level=trace
com.adobe.adept.log.file=/var/log/fulfillment.log
com.adobe.adept.persist.sql.driverClass=com.mysql.jdbc.Driver
com.adobe.adept.persist.sql.connection=jdbc:mysql://127.0.0.1:3306/adept
com.adobe.adept.persist.sql.dialect=mysql
com.adobe.adept.persist.sql.user=ereading
com.adobe.adept.persist.sql.password=********
com.adobe.adept.fulfillment.security.licensesignURL=https://eusigningservice.adobe.com/licensesign
com.adobe.adept.fulfillment.security.keystore.user=operator
com.adobe.adept.fulfillment.security.keystore.password=********
com.adobe.adept.fulfillment.security.pkcs12.file=file:///etc/operator.p12
com.adobe.adept.serviceURL=http://******.dmz.******.org/fulfillment
Any ideas?
Best regards,
Teemufor solve this, change this
com.adobe.adept.fulfillment.security.pkcs12.file=file:///etc/operator.p12
for this
com.adobe.adept.fulfillment.security.pkcs12.file=/etc/operator.p12 -
Hello !!
I have an external Contetn Server that is used for storing documents, using ArchiveLink.
I need to have access to the same documents on Portal.
It's possible to make the same repository visible to portal using webdav?
What should i do?
Thanks!
Best Regards
JoãHello João,
I think it should be possible. Please check this url:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/923230b24e11d5993800508b6b8b11/frameset.htm
Br,
Javier -
WebDAV Access: SAP Content Server
Hello everyone,
I would like to use SAP Content Server to store the courses created in LSO Authoring Environment. (Client wants it this way...i have no clue why). Now in order to use SAP Content Server here, the content server must support WebDAV access. So does the content server support WebDAV, if yes -- how to enable it and how to browse it.
Thanks,
GLMIf the documents are stored in DMS with Content Server as the repository, you should be able to access them using the DMS connector to KM. This is a business package which, when installed, exposes document stored in DMS to KM as a KM repository. Then you can browse it like any other KM repository. There are a lot of posts in this forum and others about the DMS connector.
You can also try to enable WebDAV if you Content Server is using a MaxDB database.
http://help.sap.com/saphelp_nw04s/helpdata/en/42/068edfba705415e10000000a114cbd/frameset.htm
Andrew -
WebDAV repository to Content Server
Hi all,
I have a problem. We have some data in a content server, and would like to create a repository to allow users to read the file on this content server. SAP says it is posible to technically posible to connect to the content server via webdav, but I can't find how to do it. If I make a connection to the IIS I only get the files in the home directory of the content server website, that is som dlls. If I make a webdav connection to the database I only get a connection to a system webdav table that have nothing, and can't configure the table to use the content server tables.
Any idea on how to solve this? Can't use the DMS connector in this case, because we use archivelink.
Thanks in advance,
Gregori Coll Ingles.Hi Gregori
You can configure your content server data as file repository. You can refer this link for the
configuration of file repository.
http://help.sap.com/saphelp_nw04/helpdata/en/4c/9d953fc405330ee10000000a114084/frameset.htm
Or if you want to do it using IIS Server. You have to
1) Creat one virtula directory under your default website.
2) Apply your data folder as the Web Site Content Directory for that virtual directory.
For eg. you have created the virtual directory named 'Content' then you can access your web site as
http://website/Content.( website= yours website ip or name)
3) Give the same path as above in 'http system' which you have created for the WebDAV repository.
Hope this will help you.
Prasad -
Content Server as KM WebDav Repository?
Hi,
I am trying to use content server as WebDav repository for KM on portal.
Looking for possibilities, and configuration steps. Can some one help me regarding this?
Regards,
NadhDear Nadh,
Following are the possibilities for integrating the Windows File share:
cm repository in persistence mode fsdb OR fs repository.
File System Repository has alot of restrictions, so check this:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
CM Repository with persistence mode fsdb:
http://help.sap.com/saphelp_nw04/helpdata/en/62/468698a8e611d5993600508b6b8b11/frameset.htm
For Help go through the following links
https://forums.sdn.sap.com/click.jspa?searchID=13399864&messageID=5250871
https://forums.sdn.sap.com/click.jspa?searchID=13399864&messageID=5498866
https://forums.sdn.sap.com/click.jspa?searchID=13399864&messageID=5453420
https://forums.sdn.sap.com/click.jspa?searchID=13399864&messageID=157986
https://forums.sdn.sap.com/click.jspa?searchID=13399864&messageID=1702308
In the above links you can also find steps involved in creating them.
Thanks,
Regards,
Rudradev Devulapalli
Reward the points for helpful answers* -
Access Content Server Pos-installation Configuration
Hello,
I am new with Oracle ECM, I am starting to use it for Webcenter requirements.
I have installed succesfully Oracle Content Server. I accessed http://localhost:16200/cs, and it showed me the post-installation configurations.
I made some changes and restarted the server. I then realized I had made some mistakes. How can I access the configuration screen again, and make some changes? Thank you.
JoaoHi
That config screen does not show up a second time .
If you want to make modifications to the configurations then make them in<domain_home>/ucm/cs/config/config.cfg
After the changes are done UCM restart should be done .
Thanks
Srinath -
URL for data store in content Server
Dear Experts,
I m using this content server to connect with the Portal 7.0, as I m working with LSO and my content server is working fine as below....
serverType="SAP HTTP Content Server";serverVendorId="Copyright SAP AG, All rights reserved 1998, 2001";serverVersion="6400";serverPatch="1";serverBuild="190";pVersion="0046";serverStatus="running";serverStatusDescription="";serverDate="2009-02-05";serverTime="10:47:29";startUpDate="2009-02-05";startUpTime="10:40:34";lastAccessDate="2009-02-05";lastAccessTime="10:41:40";
contRep="ZADGAS_LSO";contRepStatus="defined";contRepStatusDescription="";contRepDescription="Content Server for LSO";contentStorageHost="xxx-xxx-cont";contentStorageName="LSO";secKeyVerification="y";defaultDocProt="";
Now, I want to connect Portal and content server with the URL...for data storage in the content server.
I m trying to use this URL, but is is not working...
http://xxx-xxx-cont:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
Can you please let me know what is the issue or should I make some configuration to this and please send the config documents to me ...at
email address removed
Thanks in advance.
Ahmad
Edited by: Michael Nicholls on Feb 5, 2009 10:29 PMDear All,
I want to connect SAP content server through Authrouing Environment for uploading the data in the content server.
I want to use content server as WEBDAV REPOSITORY for access the docs.
I think ... shared drive thing would work...only if the repository is created in the file systems isnt it?
I m not sure about it
Any help will be appreciated .
Thanks,
Ahmad -
Content Server and Portal Connectivity
Dear Experts,
I m using this content server to connect with the Portal 7.0, as I m working with LSO and my content server is working fine as below....
serverType="SAP HTTP Content Server";serverVendorId="Copyright SAP AG, All rights reserved 1998, 2001";serverVersion="6400";serverPatch="1";serverBuild="190";pVersion="0046";serverStatus="running";serverStatusDescription="";serverDate="2009-02-05";serverTime="10:47:29";startUpDate="2009-02-05";startUpTime="10:40:34";lastAccessDate="2009-02-05";lastAccessTime="10:41:40";
contRep="ZADGAS_LSO";contRepStatus="defined";contRepStatusDescription="";contRepDescription="Content Server for LSO";contentStorageHost="xxx-xxx-cont";contentStorageName="LSO";secKeyVerification="y";defaultDocProt="";
Now, I want to connect Portal and content server with the URL...for data storage in the content server.
I m trying to use this URL, but is is not working...
http://xxx-xxx-cont:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
Can you please let me know what is the issue or should I make some configuration to this and please send the config documents to me ...at
ahmad.siddiquee at gma!l
Thanks in advance.
AhmadDear All,
I want to connect SAP content server through Authrouing Environment for uploading the data in the content server.
I want to use content server as WEBDAV REPOSITORY for access the docs.
I think ... shared drive thing would work...only if the repository is created in the file systems isnt it?
I m not sure about it
Any help will be appreciated .
Thanks,
Ahmad -
LSO AE - Content Server how to?
Hello everyone,
I would like to use SAP Content Server to store the courses created in LSO Authoring Environment. (Client wants it this way...i have no clue why). Now in order to use SAP Content Server here, the content server must support WebDAV access. So does the content server support WebDAV, if yes -- how to enable it and how to browse it.
Thanks,
GLMIf you have WebDAV Interface to your content management system you can integrate the Learning Portal into your existing intranet, which means SAP Enterprise Learning can run without SAP Netweaver Portal.
WebDAV interfaces link the content management component with learning management software and the authoring environment. -
Content Server Installed but doesnt respond
Hi,
I have installed the Content server on Win2K3 as given in the installation guide.I have installed for file storage on the file system.
After installation i got the message that everything is ok.But then when i execute the command
http://<server>:<port>/ContentServer/ContentServer.dll?serverInfo
I get the response as page cannot be displayed.I want to use the content server for DMS storage so that i can use KPro instead of the vault.
Same thing when i do
http://<server>:<port>/
I get a pop-up asking for the user-name and password but when i give the user name as administrator and password it doesnt allow access.
Please advise
Regards
Ankan MajumdarNote Number : 361123
Symptom
You want the SAP Content server to work properly.
Other terms
Signed URLs, AdminSecurity, SsfVerify failed
Reason and Prerequisites
The SAP Content Server was installed in accordance with the installation guide. For new installations, we recommend that you use the latest released version of the SAP Content Server, regardless of the SAP System release to which the SAP Content Server is connected.
Solution
This note provides additional information on different aspects of security when using the SAP Content Server.
Security against data loss
The SAP server content stores the contents of the confidential document either in an SAP-DB instance or in the file system. To avoid data loss, the usual measures for databases and file systems are taken. These are only mentioned briefly here: Redundant hardware (mirror disks, raid systems and so on), regular backup (log files, backup). When you back-up the Content Server, note that you also have to save the ContentServer.ini configuration file as well as the Security directory in addition to backing up the database instance or the directories of the file system used for document content.
Note 319332 describes backup strategies for a Content Server with database folders.
SAP does not have a tool for backing up file system folders. In this case it is the responsibility of the customer to select and convert the backup strategy. Here you should note that, for a complete and consistent backup of a file system folder, it may be necessary to shut down the Content Server for the duration of the backup.
Security against unauthorized accesses on filed contents
Before you access the content server, an authorization check usually occurs in the SAP system. However, the content server is usually accessed using a disclosed HTTP log. To make sure that only authorized accesses are possible, 'signed URLs' must be used. Signed URLs are URLs that were signed by the SAP system. You can recognize signed URLs because they are considerably longer than unsigned URLs and contain additional parameters. The signed URL, in particular, contains the additional parameters expiration (expiry time) and secKey (digital signature). A signed URL is only valid if the expiry time has not yet been exceeded and if it contains a valid signature. In order that the signature can be checked by the content server, the public key (certificate) of the SAP system must be stored on the content server and tagged for the corresponding repository. Transactions OAHT, OAC0 (as of 4.6C) and CSADMIN (as of 4.6C for SAP content server) are used to transfer the certificate. The certificate must be activated on the content server for the repository. Use CSADMIN to do this (for SAP Content server).
In order that the digital signature of the SAP system can be used properly, EVERY SAP system must have its own unique certificate. To ensure this, a 'PSE' must be generated once in every SAP system after this SAP system is developed. Use transaction PSEMAINT to do this (note 354819).
To protect the connection between the Content Server and its SAP-DB instance, the name and password of the database user can be changed and stored in encrypted format in the configuration of the content server. For details, see note 661852.
Access control for the administration
The content server is partly administered from within the SAP system, and partly from outside it. When it is administered from outside, you must ensure that only authorized persons have (administrative) access to the server on which the content server is running. The (administrative) access to the database (note 212394) must be restricted accordingly.
In order that administrative accesses from the SAP system are only possible for authorized persons, the parameter AdminSecurity must be set to 1 in the content server. You will find details on this in the installation documentation of the SAP Content Server.
Protection against server hardware outage
The Windows version of the SAP Content Server can also be installed in an MSCS environment (Microsoft Cluster Server). For more detailed information, see "SAP Content Server 6.20 in an MSCS Environment", dated March 4, 2003, in the "News" section on the SAP Service Marketplace (http://service.sap.com/ha
The duration of the non-availability of content servers, cache servers and alias servers can be reduced with the automated operator intervention described in note 484459. -
DMS Content server restriction
Hi All,
In the past we have tried to restrict user access to DMS data (on content server) using DOC type/status restriction. Now we are trying to explore the possibilities of restricting users from accessing export control data from a specific content server.
1. Is there a authorization object using which we can define what content server one have access/restriction?
2. If answer is NO is there a standard method industry is following for this?
Suresh.Authorization Object C_DRAW_TCD (Activities for Documents)
The following table shows authorization object C_DRAW_TCD. This object controls which users can process which document info records, based on a combination of activity and document type.
Fields
Possible Values
Description
ACTVT
(Activity)
01
02
03
06
17
Create
Change
Display
Delete
Maintain number range object
DOKAR
(Document type)
The activities can be executed for the document type.
Authorization Object C_DRAW_TCS (Status Dependent Authorization)
The following table shows authorization object C_DRAW_TCS. This object controls which users can process which document info records, based on a combination of activity, document type, and status.
Fields
Possible Values
Description
ACTVT
(Activity)
01
02
03
06
Create
Change
Display
Delete
DOKAR
(Document type)
The activities can be executed for the document type.
STATUS
(Document status)
Authorization Object C_DRAW_STA (Document Status)
The following table shows authorization object C_DRAW_STA. This object controls which status(es) can be set for which document type.
Fields
Description
DOKAR
(Document type)
The statuses are allowed for this document type.
DOKST
(Document status)
Authorization Object C_DRAW_BGR (Authorization Group)
The following table shows authorization object C_DRAW_BGR. This authorization object allows you to limit access to individual documents.
Fields
Possible Values
Description
BEGRU
(Authorization group)
0000 - ZZZZ
Used to restrict the authorizations for document maintenance further.
Authorization Object C_DRAW_DOK (Document Access)
The following table shows authorization object C_DRAW_DOK. This authorization object controls which original data of a specific document type there are access authorizations for.
Fields
Possible Values
Description
ACTVT
(Activity)
52
53
54
55
56
57
Change application start
Display application start
Display archive application
Change archive application
Display archive
Store archive
DOKAR
(Document type)
Here you enter the document type that access to original data is allowed for.
Authorization Object C_DRAD_OBJ (Object Link)
The following table shows authorization object C_DRAD_OBJ. This object controls which users can process which document info records, based on a combination of activity, object, and status.
Fields
Possible Values
Description
ACTVT
(Activity)
01
02
03
06
Create
Change
Display
Delete
DOKOB
(Object)
You must enter the data base table for the objects here (for example, MARA for material record).
STATUS
(Document status) -
I installed content server, when I access using the port of Apache Server I can log in.
But, if I use the port 4440
I get the following:
Network message format error. Unable to parse browser environment or content item.
Unable to parse properties. Name-value pairs are missing an '='.
So, I only entered using the Apache Server port and when I checked in a document I could
not make it and get this:
Content Server Request Failed
Unable to execute service CHECKIN_NEW and function Imeta.
(System Error: Unable to execute query 'Imeta(insert into DocMeta (dID, xComments, xDiscussionCount, xDiscussionType, xPartitionId, xWebFlag, xStorageRule) values(1, '', 0, 'N/A', '', '', ''))'. ORA-00904: "XSTORAGERULE": invalid identifier)
I would appreciate any help.Hi,
Can you repost this under the "Enterprise Content Management" forum under Fusion Middleware.
cheers
Matt. -
How to Access data from SAP Content Server through SAP Portal
Hi Experts,
I want to aceess the data from SAP Content server through portal. Currently I am working on LSO business package. The SAP content server should work like Webdav as we uses KM as webdav.
I am trying to use this URL into the CMS address but it is not working
http://XXX-XXX-XXXX:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
Is there any other procedure for acceesing the DATA from SAP content server. ?
Thanks,
AhmadIf your Content Server is being used by DMS, then you can use the DMS Connector for KM. This connector allows all documents stored in DMS to be accessed in Portal as if they are stored in KM. For more info see this:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/d289b446076bb2e10000000a1553f6/frameset.htm
Andrew
Maybe you are looking for
-
because "it uses too much power" I did'nt get that message a few weeks ago when I used Snow Leopard and now I can't approach the files I saved on the external disk. Question 1: How do I solve the problem? (Without going back to Snow Leopard) Q2: Why
-
Need debugging help: Why is JScrollPane auto-scrolling?
I'm trying to figure out why when I double-click on a cell within a JTable that's wrapped in a JScrollPane in order to open up another window, the JScrollPane automatically scrolls to the top. Even when I update the double click operation to simply c
-
PURCHASE REQUISITION FOR SERVICE
HELLO IN THE TRANSACTION ME21N FOR PURCHASE REQUISITION FOR SERVICE. IN THE SERVICE VIEW AT ITEM LEVEL, THERE IS A LIST DISPLAYED, SO I NEED TO ADD A FIELD WITH INFORMATION OF THE MATERIAL GROUP. ANYBODY KNOW HOW TO DO THAT? THANK YOU ELENA
-
Xdofx function least() always returns Yes
Hi, I am trying to do the following calculation I have a aggregated field called AD_IMPS_TOTAL. And I also have a field called PRICE and TARGET_IMPS which are not aggregated fields. And I wish to perform the following calcuation. least (AD_IMPS_TOTAL
-
Select information about programs of sceduled report sets
Hi, We would like to get information about all scheduled Report Sets in our production system. We need names of each 'Report Set', when it's report set - each program under it, and parameters passed for all Report Sets that were scheduled. For Report