Content Server and Portal Connectivity

Dear Experts,
I m using this content server to connect with the Portal 7.0, as I m working with LSO and my content server is working fine as below....
serverType="SAP HTTP Content Server";serverVendorId="Copyright SAP AG, All rights reserved 1998, 2001";serverVersion="6400";serverPatch="1";serverBuild="190";pVersion="0046";serverStatus="running";serverStatusDescription="";serverDate="2009-02-05";serverTime="10:47:29";startUpDate="2009-02-05";startUpTime="10:40:34";lastAccessDate="2009-02-05";lastAccessTime="10:41:40";
contRep="ZADGAS_LSO";contRepStatus="defined";contRepStatusDescription="";contRepDescription="Content Server for LSO";contentStorageHost="xxx-xxx-cont";contentStorageName="LSO";secKeyVerification="y";defaultDocProt="";
Now, I want to connect Portal and content server with the URL...for data storage in the content server.
I m trying to use this URL, but is is not working...
http://xxx-xxx-cont:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
Can you please let me know what is the issue or should I make some configuration to this and please send the config documents to me ...at
ahmad.siddiquee at gma!l
Thanks in advance.
Ahmad

Dear All,
I want to connect SAP content server through Authrouing Environment for uploading the data in the content server.
I want to use content server as WEBDAV REPOSITORY for access the docs.
I think ... shared drive thing would work...only if the repository is created in the file systems isnt it?
I m not sure about it
Any help will be appreciated .
Thanks,
Ahmad

Similar Messages

The difference between Telepresence Content Server and MSE 3500

Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.

In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods. One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc. However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share.

Content server and Images

Hi... we've found some odd behaviour with content server and I'm wondering if anyone else has had similar experience.
Our installation is spread accross a number of servers, we have a front end portal/image server with Content Server installed on one of the servers behind the firewall.
When we create branding portlets (and content canvas portlets), it all works happily. The html template is created in the ptcs/publishedContent on the Content Server machine and images appear in the correct template folder on the Image Server machine and everything displays correctly on the portal page.
Problem is, for any other content portlets (eg: announcement), the images end up in the ptcs/publishedContent on the Content Server machine as well ... which isn't good as this location is not accessible from the browser - the published html gets rendered correctly but no images appear.
We don't want to manually transfer images from the Content Server to the Image Server and hack the generated ptcs html.... from what I can tell, all the properties set for the Image server are correct so we've hit a brick wall in terms of figuring out why it's behaving this way, our expectation was that the content portlets would operate in the same way as the branding portelts but this doesn;t seem to be the case.
thanks in advance

You should be able to edit the gateway space URL of the Content Server Published Content Web Service to include the published content location of where it is.
Alternately, you can set the published content targer and file transfer method for the server (or any other content server section) by right-clicking on the top-level node (or the individual folder) in the Content Server Explorer, and selecting "Publishing Target..." and setting the appropriate values in the resulting dialog box.

Confuguration of DMS using an external content server and KPRO

Hello all,
I am working in a new EH&S SAP environnement.
The aim is to configure a DMS to link EH&S with an external content server Documentum using Kpro.
I have done the following IMG activities:
- Specify Content Servers (Tcode: OAC0)
- Maintain Categories (Tcode: OACT)
- Specify links
- Specify Data Carriers
- Define document types
- Assign EH&S Document Types to Data Carriers
But i am facing to the following problems:
- CG36VEN: error: "could not create report for specification XX, variant XX and lang. EN.
- CG34: error: cannot display document MSDS
- CG4B: error: cannot display document TEST
Are there other actions to be done in the IMG activities?
Any idea to help me please?

More details:
I am working in a new EH&S SAP environnement.
I have installed a new DMS link witn an external documentum content server and he is working fine.
My aim is to configure EH&S to link SAP EH&S with my DMS.
Actually my connexion between EH&S and DMS is not working.
Can you tell me what are actions to be done to link EH&S to my DMS.
Thanks,
Ludovic Roux

Diff. between content server and archive server(SARA on content server)

I am very interested about difference between content server and archive server. Is there content server supplied by SAP and archive server by third party producers or something else?
If so dditionally what needs to be done to archive data (via Sara) on content server. I did it on sap R/3 4.0 on an archive server. Is it huge difference to do it on 4.7x2 on content server?

Hey,
The content server is used to save documents,
and SARA (and other third party producers) are used to archive old data.
For example:
You should use Content server - When you need to save un-structured data about worker (e.g: pictures, documents and etc) .
You should use SARA (and other third parties) - When you need to move to archive old
worker which have left your organization before 5 or more years (there for they are not relevant for you)
Here is some more information about Content server
from help.sap.com:
"Therefore, besides the SAP database, an external content server is always available in every SAP system installation. In this way, the necessary technical infrastructure is provided for all document-centric applications and business scenarios that do not require a long-term archiving solution"
Here is some more information about SARA and archiving
from help.sap.com:
"Data Archiving removes from the database application data from closed business transactions that are no longer relevant for the operational business. The archived data is stored in archive files that can be accessed by the system in read-only mode."
for more information:
http://help.sap.com/saphelp_nw70/helpdata/en/8c/e9ddbb5d9a524bbb7854d31b963248/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/73/c335406ee32e34e10000000a155106/frameset.htm

Upgrade Content Server and Site Studio

Hello Everyone,
We are trying to upgrade both Content Server and Site Studio from 7.1 / 7.2.1 to
10gR3
1) Instead of updating existing instance we Installed new 10gR3 instance
Exported folder structure archive, layout files and data files from old instance
2) Imported into new 10gR3 instance.
3) Tried to upgrade sitestudio websites
4) Its created a project file but not adding any SiteStudio section properties
(ex. primaryURL, secondaryURL, IncludeSectionInNavigation etc.), if I open the site in
designer, it shows just blank site structure without any templates associated and all sections are disabled.
Any ideas on this??
Venkat

Hi ,
If you are displaying the data from spaces only then all the operations like creating a web content , editing it etc can be done from Webcenter spaces itself .
Thanks
Srinath

Windows Media Player no sound while playing a avi file in server and client connection using TCP/IP connection

Hello there
I have a problem with my windows media player while using server and client connection by using TCP/IP connection. So when I play a video using Windows Media Player in LabVIew there isn't any sound come out but when I'm playing a video by a Windows Media Player only the sound will come out. Can you help me solve this problem?
I also upload the vi as the reference.
The username for the client is ihsanhaikalz and the password is ganteng
Thanks
Attachments:
Client Remote.vi ‏746 KB
Server Remote.vi ‏1433 KB

Hi ican,
I was looking at your VI's but I cannot seem to pinpoint exactly where you are using Windows Media Player. In order to more quickly assist you, could you please recreate this issue more concisely in a smaller set of VIs. Also, were you able to get sound when you did not use the TCP/IP connection and simply played the files in LabVIEW?
I noticed in a few places that you were using the Play Sound File.VI from the Graphics and Sounds palette. Is that what you are refering to? I noticed there that the file path that you have designated for the song is simply the song title. Instead, this should be a path to where the song is located on your computer.
Also, if you are planning on using Windows Media Player, have you considered using the ActiveX commands for Windows Media Player? Here are a few examples if you are unfamiliar with this functionality.
Example 1 and Example 2.
I hope this helps!
Kim W.
Applications Engineer
National Instruments

How to check ABAP and Portal connections

Hi
I was told to check ABAP and Portal connections. What does that mean? And what and where to check?
Thanks
Annie

Hi
Thanks for your reply.
We are on BI 7. SP16.
When i run that in se38, i am getting the following information: No default in RSPOR_T_PORTAL and no user parameter RSPOR_DEFAULT_PORTAL" when i clicked on yes(tickmark), view BI_Content of web template 0ANALYSIS_PATTERN(A) is displayed
There are two options with check box are present 1. 30 template present (Unchecked) 2. BI- Template Present (checked), and a big XML code is displayed.
When i executed in browser mode, it says Windows cannot find'/irj/servlet/prt/portal............... make sure you typed the name correctly and then try again. to serch for a file, click the start button, and then click search"
What does that mean?
Regards
Annie
Edited by: Annie on Nov 17, 2008 5:38 AM

Difference Between "Content Server" and "Content Services"

Can someone tell me the difference between "Oracle Content Server" and "Oracle Content Services"? From my research, I get the sense that
these are different products (and Oracle Content Services seems like it's an obsolete one), but I would like some confirmation.
My apologies for the uber-newbie question :)

Content Services is what you had with Content DB, Oracles old product.
Content Server is the core engine of the UCM product, formerly Stellent Content Server.

Connection Settings between Content Server and DMS server

Dears,
I installed DMS server and Content Server,Now I need to do connection settings between these server.
Both are installed on seprate servers.
So please suggest what are the steps to set connection between these servers.
Shivam

Hi all,
I installed the Content Server with DB instance. ECC on AIX and the Content Server on Windows are on different domains and wanted to integrate. After the installation what I did is as follows...
I am trying to create the Content Repository using the Tx- OAC0, given the the following details as
Content Repository name--- DMS_xxxx
Document Area - DMS
Storage Type -- HTTP Content Server
Version -0046
HTTP Server --- fully qualified host name of the Content Server
Port Number --- 1090
HTTP Script --- ContentServer\ContentServer.dll
Physical Basic Path--- (initially) -
/usr/sap/<ECCSID>/SYS/global/
(modified) --- E:\ContentServer\ -
not available, thought it will create, even created later
Physical archive path --- SAME as Physical Basic Path
When I check the connection, I am getting an error "Content repository DMS_xxxx does not exists.
When I check Tx- CSADMIN-- it gives an error saying the "HTTP error : 4010 (authorized) ' Permission denied: adminContRep&configSet"
I am not sure what user should i use for this and what should be the information of ContentStorageHost, ContentStorageName and Storage need to be provided.
Please help me in this....
Regards
Krishna

Edge Server and database Connectivity

Hi,
I have installed RFID reader and Oracle Sensor edger server in Country A.
Database Oracle 10G R2 in another Country B. I am using a VPN connection.
Can I use stream dispatcher to populate data to database located at Country B.
can anyone help me.
thanking you
john

Hi John!
If you have a network connection between the reader and the database than it does not matter if they are in the same room or in different countries.
Using a VPN does imply that your network is set up in a way that the network traffic from the reader to the database has to pass through the VPN tunnel. On the database server you will have access to the database listener.
I haven't yet worked with the Streams Dispatcher but I worked with the HTTP dispatcher. I send the packets to a JSP application running on the application server and this wrote the content into the database.
cu
Andreas

Content Server And Asp e-Commerce site

Hey guys,
I've got the Content server installed and can upload books from my loacl test machine to the actualy server and download them as a preview. But im a little confused as to how to create the connection between purchasing a book and being supplied with a link? any other tutorials?
cheers
Darren Phillips
darren.c.phillips AT gmail.com

Hi Lee,
I've got that book, but I cant seem to find any working examples of a store, eg the section when the user clicks BUY BOOK and is then presented with the download link.
as for Digital Editions, would this allow me to create my own bookstore online and use DRM styles to control the features of the book? if so how can I get it?
essentially i've got Content Server to upload books to the server, and when i view them as a preview from the ADMIN acrea of the Content Server I can download the book and read it. If i try going directly to the books link on the server, im told i can not open it (which is correct).
im looking for a guide on how to create a store to encoprorate this featuer for hte books.... any ideas?
Darren

Content server and Dynamic image in PDF

Hi all,
I am trying to make up a PDF through SFP transaction in ABAP that has a photograph included in it. This photograph is saved in the content server. The photograph that is inserted depends on a certain number of data and the URL of the picture is dynamically set using function : ARCHIVOBJECT_GET_URI.
The URL is ok but when I bind this to image object in PDF, the picture does not appear !
Has anyone dealt with a simlilar problem ????
Nicolas

up

Save attachment on content server and create a document link

Hi All
I have the following requirement:
1. We have an attachment
2. We are creating a parked document number.
3. We need to place the attachment on the Content Server
4. We need to create a link b/w the parked document number and the attachment which is available on the CS.
Could anybody please let me know how to place the attachment on the Content Server & how to establish the link b/w the parked document number and the attachment which is available on the CS?
Your help is most appreciated.
Thank you
Sen

We're changing the logic.
Thank you.

MS SQL Server and JDBC Connection

I am doing on MS SQL Server 2000 with JDBC for RMI. I download driver from the Microsoft site, and used a connection statement like
con = DriverManager.getConnection("jdbc:sqlserver://localhost:1433;user=sa;password=");
unfortunately the connection didn't succeed, it says the server actively refused. connect
where is the problem? Pls anyone with solution.

BalusC wrote:
"Connection refused" roughly means that the remote server is not accessible on the specified port.
Check the correctness of the port and check if there isn't a firewall/proxy running which blocks that port.What I don't understand about the error messages, and so thought it must be related to MS SQL, rather tthan connections in general, is the phrase actively refused that he used. I take that to menat that the DB accepted a connection attempt, then, after attempting to authenticate, cut it off. But its probably just a misrepresentation of the error message on his part.
Specific MS SQL information, I don't know though.

Content Server and Portal Connectivity

Similar Messages

Maybe you are looking for