Content Server URL Check is getting failed.

Hi,
We have Installed Content Server 6.4 on Windows Server 2008 (64 Bit OS) and IIS 7.0 with all the latest patches.
The sapinst log file shows that the Installation was successfull with no errors.
But, still URL check for Content server is getting failed.
URL which is used : http://<HOSTNAME>:<Port>/ContentServer/ContentServer.dll?serverInfo
Please Help.
Thanks,
Deepak

Hi,
Did you configure the following steps for the content server on the windows server for the IIS
Created one local user u201Cxxxxxxxu201D on the windows system.
Check that the password of the user on the windows should never expire.
In the authentication method select the options.
Integrated windows authentatication
Basis authentication.
Configure IIS for ContentServer & CacheServer and adjust Folder security options
Did you create any content reprosetry in OAC0 Transaction in the system which you want to link the Content server.
Thanks
Rishi Abrol

Similar Messages

  • LSO Content Server URL

    Dear SAP Gurrus
    we are trying to connect LSO with content server repository instead of portal KM .we installed content server 6.40 and connected with ECC and wand create one repository Z_lso via csadmin and oac0 please tell me how do i know and where i get the URL for this repository just like portal KM repository we need to define that URL in LSO settings
    "IMG -> Training and Event Management -> SAP Learning Solution - >Authoring Environment -> Specify CMS Address"
    Regards
    Arshad
    Edited by: Muhammad Arshad Ghaznavi on Jun 16, 2008 3:09 PM

    Hi,
    I have installed Content Server 6.4 successfully on WIN2K8 with IIS7 and MAXDB 7.6.6.20
    When i tried to access the content server url, i was prompted with a POP UP asking for download of ContentServer.dll.
    1) Firstly check whether you have installed all the components pertaining to IIS 7.0 in your system
    2) Check whether you have allowed contents like *.dll in the IIS
    Hope this helps.
    Regards,
    Deepak Kori

  • Error while opening content server url

    Hi all,
    I am working on version 11.1.1.5
    My admin server is running and UCM server is also running. But while I am trying to open the content server url ( /cs ) it is giving me following error.
    >
    Server Message
    The Server is unavailable.
    Please contact the administrator of this site to report the problem.
    Click here for server process administrationIn weblogic console for datasource CSDS i have checked the connection and it is working fine. So there is no issue with database.
    Also I am not getting any error on admin or UCM server console.
    Please help.
    --NavinK                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Thanks Srinath for the reply.
    the problem was
    Caused By: intradoc.data.DataException: !csDbUnableToExecuteSql,DELETE from Conf
    ig WHERE dSection='DevUpdate' AND dName='RevClasses' AND dVersion='11.1.1.2.0'!$
    ORA-01552: cannot use system rollback segment for non-system tablespace '******_OCS'I found the solution, I just created new undo tablespace and make it default. after that tried to execute create statement.
    CREATE UNDO TABLESPACE "UNDOTMP"
    DATAFILE 'UNDOTMP.DBF01' SIZE 100M REUSE
    AUTOEXTEND ON NEXT 51200K MAXSIZE 15000M
    ALTER SYSTEM SET undo_tablespace=UNDOTMP SCOPE=BOTH; Its working now.
    Thanks
    --NavinK                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Content Server URL not working.Win2008-MAXDB 7.6.06.20-IIS7

    Hello Experts,
    I have installed Content Server 6.4 successfully on WIN2K8 with IIS7 and MAXDB 7.6.6.20
    When i tried to access the content server url, i was prompted with a POP UP asking for download of ContentServer.dll.
    I have strictly followed the installation guide -CONTENTSERVER on WIN 2008 and installed all the necessary roles mentioned in the installation guide.I have also checked the option - install website during my installtion.but still facing the issue while accessing content server URL.
    While going through SDN forums, in some of the threads, it was mentioned that manual installation of content server website has resolved the issue.
    Could any one please let me know the procedure to be followed for manual installation of content server website to the port manually.
    Or
    Kindly suggest the solution for this, if you have come across the similar issue.
    Thanks & Regards,
    Sriram Pingali

    Hi,
    I have installed Content Server 6.4 successfully on WIN2K8 with IIS7 and MAXDB 7.6.6.20
    When i tried to access the content server url, i was prompted with a POP UP asking for download of ContentServer.dll.
    1) Firstly check whether you have installed all the components pertaining to IIS 7.0 in your system
    2) Check whether you have allowed contents like *.dll in the IIS
    Hope this helps.
    Regards,
    Deepak Kori

  • Content Server URL Generation expiration parameter

    Hello,
    I'm using a content server to store documents. When i need to retrieve files, the expiration parameter on the URL is automaticaly set to 1 day .
    Where i can change that? Is it possible?
    Regards,
    Joao

    Hi,
    are you sure that it's 1 day. The default value should be 2 hours. I remember that I couldn't find how to change this default value. There is a FM SCMS_URL_SIGN which signs URL for content server. You can see there that it has an option to set expiration to any value or set duration. The default duration is hard coded to 2 hours. I quickly checked some of FMs which call SCMS_URL_SIGN and it looks like nobody sets up these two optional parameters. You can try to use enhancement framework to modify behavior of this FM.
    Cheers

  • Making the content server URL available on Internet

    Hello all,
    We have installed Weblogic server + SOA + UCM content server + Webcenter 11.1.1.4.
    We have completed our initial phase of requirement and we are currently running on Production mode.
    Now we want our content server instance to be available on Internet. But we are worried about the security issues and performance issues. I want to know is there any guide or document which describes about this? What all we need to keep in mind or make changes getting our Content server to public ip ?
    Thanks

    Hi Surjit Singh,
    For the performance side I think you might be looking for this document:
    http://www.oracle.com/us/products/middleware/content-management/ecm-extreme-performance-wp-077977.pdf
    It at leasts gives kind of a hint to what hardware you want to use.
    If your internet facing server is mainly for consulting documents and your internal system is for managing the documents you can choose to split them. This means 1 contribution (internal) server and 1 consumption (internet) server. With 1 way replication you can keep you consumption server updated and you can make sure nothing is changed on this consumption server. In any case you can address your security concerns for internet specifically on this environment.
    The configuration wouldn't be that different but then again this all depends on what exactly you want to do with your server.
    Some more info about replication can be found here: http://download.oracle.com/docs/cd/E21764_01/doc.1111/e10792/c06_migration.htm#CHDIDDDD

  • DB 13 Calender-DB check is getting Failed

    Hi Team,
    Configured DB check job is getting failed in DB13 Calender with the following error.
    Job started
    Step 001 started (program RSDBAJOB, variant &0000000000015, user name BATCHJOBS, language E)
    Execute log. command SAPDBA on host ukcbx001
    __Parameters: -check -u /
    SAPDBA: SELECT TYPE,PARAM,ACTIVE,SEVERITY,CHKOP,CH KVAL,UNIT,CHKDESC FROM
            "SAPR3".DBCHECKORA
    ORA-00942: table or view does not exist
    SAPDBA: Could not read check criteria.
            Taking defaults.
    Job finished.
    Please help me if any body have idea on it.
    Best Reagrds,
    Vinod

    Hi vinod,
    ORA-00942 error occurs when execute Brtools or sapdba. This problem occur due to old version of SAPDBA.please update your Brtools & try again .
    This may resolve your problem.
    karan

  • Access UCM 11g Deployed component from Content server URL

    Good day to All,
    I am successfully deployed custom UCM component ("myservices "--will store data in ucm Scema)
    and enabled the component
    can you guide me how access the deployed (enable also) componet
    I tried call using below url but not working
    http://localhost:16200/idc/idcplg/IdcService=myservice
    my manifest file contain following
    <?hda version="11gR1-11.1.1.3.0-idcprod1-100901T121843" jcharset=UTF8 encoding=utf-8?>
    @Properties LocalData
    CreateDate=22/10/10 16:34
    blFieldTypes=CreateDate date
    ComponentName=myservice
    blDateFormat=dd/MM{yy}{ HH:mm}!mAM,PM!tEurope/Berlin
    @end
    @ResultSet Manifest
    2
    entryType
    location
    component
    myservice/myservice.hda
    componentExtra
    myservice/readme.txt
    componentClasses
    myservice/classes
    componentLib
    myservice/lib/
    @end

    Thank you so much Kent ,I am able to call the java component during the check-in process
    But My component using opensource jars (ex :docx4j-2.5.0.jar) getting error while calling the java class which part of opensource jar (docx4j-2.5.0.jar)
    I added libpath in .hda file below is text in my .hda file
    <?hda version="11gR1-11.1.1.3.0-idcprod1-100505T121221" jcharset=UTF8 encoding=utf-8?>
    @Properties LocalData
    blFieldTypes=
    serverVersion=7.1.2.166
    hasPreferenceData=false
    blDateFormat=M/d{yy}{ h:mm[:ss]{ a}}!mAM,PM!tAmerica/Chicago
    classpath=$COMPONENT_DIR/classes;$COMPONENT_DIR/lib/avalon-framework-api-4.3.1.jar;$COMPONENT_DIR/lib/valon-framework-impl-4.3.1.jar;$COMPONENT_DIR/lib/commons-codec-1.3.jar;$COMPONENT_DIR/lib/commons-io-1.3.1.jar;$COMPONENT_DIR/lib/commons-lang-2.4.jar;$COMPONENT_DIR/lib/commons-logging-1.1.1.jar;$COMPONENT_DIR/lib/commons-vfs-patched-1.9.1.jar;$COMPONENT_DIR/lib/docx4j-2.5.0.jar;$COMPONENT_DIR/lib/fop-patched-0.95.756437.jar;$COMPONENT_DIR/lib/hwpf-3.4.0.jar;$COMPONENT_DIR/lib/jcr-1.0.jar;$COMPONENT_DIR/lib/jdom-1.0.jar;$COMPONENT_DIR/lib/junit-4.4.jar;$COMPONENT_DIR/lib/log4j-1.2.15.jar;$COMPONENT_DIR/lib/parent-pointer-plugin-1.0.jar;$COMPONENT_DIR/lib/wmf2svg-0.8.3.jar;$COMPONENT_DIR/lib/xalan-patched-2.7.0.jar;$COMPONENT_DIR/lib/xmlgraphics-commons-1.3.757686.jar;
    ComponentName=Test
    version=2005_01_24
    libpath=$COMPONENT_DIR/lib
    @end
    @ResultSet Filters
    4
    type
    location
    parameter
    loadOrder
    validateStandard
    test.CheckinFilter
    null
    1
    @end
    @ResultSet ClassAliases
    2
    classname
    location
    @end
    Component floder structure
    Component name :Test
    Under Test following folders
    Classes ,lib,resources,.hda file
    It not recognizing the libraries which are part of lib folder in component ,Kindly help me
    Regards
    Varaprasad

  • Content Server error TEST: CL_HTTP_CLIENT= CREATE failed

    Hi,
    I have installed Content managment server successfully. but
    I m facing this error when I am trying to create a content repositry in OAC0
    can any one help..???
    Content Managment - windows 2008 r2
    SAP - Solaris sparc10
    Edited by: letzfriend on Jan 23, 2012 9:52 PM

    Hello,
    Can you check syntax on the line ? I think, it should be like
    call method cl_http_client=>create_by_destination
    Also, check the Authorization of the user, refer to below link
    http://help.sap.com/saphelp_nwpi711/helpdata/en/48/c7c53bda5e31ebe10000000a42189b/content.htm
    Thanks,
    Arjun

  • Content Server SQL Server 2000 Connection Error (very annoying)

    All of the diagnostic tests are failing because of SQLServer connection error (see below for diagnosticTests.jsp output).
    I checked database.content.properties file, all connection information is correct. The portal is running on the same SQL server. So I know that the SQL server is running just fine. I just could not isolate the problem. Can you help?------------------------------------------------------------------------
    Content Server DB Connection FAIL
    Settings JDBC Driver: com.plumtree.jdbc.sqlserver.SQLServerDriver JDBC URL: jdbc:plumtree:sqlserver://OXO-SRV03:1433;DatabaseName=ptcsdb DB Driver: com.plumtree.jdbc.sqlserver.SQLServerDriver DB Vendor: com.plumtree.content.rdbms.impl.VendorSqlServer User Name: ptcsdbuser Possible Resolution Check the Content DB JDBC Server, JDBC Port, JDBC User, JDBC Password, and JDBC Databse settings in the content.properties file. Error Details Exception Message: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect com.plumtree.jdbc.base.BaseSQLException: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source) at com.plumtree.jdbc.base.BaseExceptions.getException(Unknown Source) at com.plumtree.jdbc.sqlserver.tds.TDSConnection.(Unknown Source) at com.plumtree.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source) at com.plumtree.jdbc.base.BaseConnection.connect(Unknown Source) at com.plumtree.jdbc.base.BaseConnectionStartup.run(Unknown Source) Content DB Table CREATE and DELETE FAIL
    Settings Unable to get a connection to the content server DB Possible Resolution Check the Content DB JDBC Server, JDBC Port, JDBC User, JDBC Password, and JDBC Databse settings in the content.properties file. Also ensure that the Content Database Server is running. Error Details Exception Message: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect com.plumtree.jdbc.base.BaseSQLException: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source) at com.plumtree.jdbc.base.BaseExceptions.getException(Unknown Source) at com.plumtree.jdbc.sqlserver.tds.TDSConnection.(Unknown Source) at com.plumtree.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source) at com.plumtree.jdbc.base.BaseConnection.connect(Unknown Source) at com.plumtree.jdbc.base.BaseConnectionStartup.run(Unknown Source) Content DB Update and Query FAIL
    Settings Unable to get a connection to the Content DB Table Name: PCSSYSTEM Column Name: CREATEDVERSION Possible Resolution Check the Content DB JDBC Server, JDBC Port, JDBC User, JDBC Password, and JDBC Databse settings in the content.properties file. Also ensure that the Content Database Server is running. Error Details Exception Message: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect com.plumtree.jdbc.base.BaseSQLException: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source) at com.plumtree.jdbc.base.BaseExceptions.getException(Unknown Source) at com.plumtree.jdbc.sqlserver.tds.TDSConnection.(Unknown Source) at com.plumtree.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source) at com.plumtree.jdbc.base.BaseConnection.connect(Unknown Source) at com.plumtree.jdbc.base.BaseConnectionStartup.run(Unknown Source) Portal DB Connection FAIL
    Settings JDBC Driver: com.plumtree.jdbc.sqlserver.SQLServerDriver JDBC URL: jdbc:plumtree:sqlserver://OXO-SRV03:1433;DatabaseName=plumdb DB Driver: com.plumtree.jdbc.sqlserver.SQLServerDriver DB Vendor: com.plumtree.content.rdbms.impl.VendorSqlServer User Name: plumdbuser Possible Resolution Check the Portal DB JDBC Server, JDBC Port, JDBC User, JDBC Password, and JDBC Databse settings in the content.properties file. Error Details Exception Message: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect com.plumtree.jdbc.base.BaseSQLException: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source) at com.plumtree.jdbc.base.BaseExceptions.getException(Unknown Source) at com.plumtree.jdbc.sqlserver.tds.TDSConnection.(Unknown Source) at com.plumtree.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source) at com.plumtree.jdbc.base.BaseConnection.connect(Unknown Source) at com.plumtree.jdbc.base.BaseConnectionStartup.run(Unknown Source) Portal DB Query FAIL
    Settings Unable to get a connection to the Portal DB Table Name: PTUSERS Column Name: OWNERID Possible Resolution Check the Portal DB JDBC Server, JDBC Port, JDBC User, JDBC Password, and JDBC Databse settings in the content.properties file. Also ensure that the Portal Database Server is running. Error Details Exception Message: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect com.plumtree.jdbc.base.BaseSQLException: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source) at com.plumtree.jdbc.base.BaseExceptions.getException(Unknown Source) at com.plumtree.jdbc.sqlserver.tds.TDSConnection.(Unknown Source) at com.plumtree.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source) at com.plumtree.jdbc.base.BaseConnection.connect(Unknown Source) at com.plumtree.jdbc.base.BaseConnectionStartup.run(Unknown Source) Document Repository OK Workflow Server FAIL
    Settings Workflow Server Base URL: http://OXO-SRV03:7087 Content Server URL: http://OXO-SRV03:7777/ptcs Workflow Server Portlet URL: http://OXO-SRV03:7087/workflow Possible Resolution Verify that the Plumtree Workflow service has been started. Also, check the Workflow Serverdiagnostics for more detailed information. Error Details Exception Message: Cannot access Burlap service at [http://localhost:7087/wfserver/caucho/workflowsvc-burlap]; nested exception is com.caucho.burlap.client.BurlapProtocolException: org.springframework.remoting.RemoteAccessException: Cannot access Burlap service at [http://localhost:7087/wfserver/caucho/workflowsvc-burlap]; nested exception is com.caucho.burlap.client.BurlapProtocolException: com.caucho.burlap.client.BurlapProtocolException: at com.caucho.burlap.client.BurlapProxy.invoke(BurlapProxy.java:171) at $Proxy2.connectPortalUser(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at org.springframework.remoting.caucho.BurlapClientInterceptor.invoke

    Don't know if anyone is still having problems with this, but just in case...
    I was getting a similar error. I had an Event Viewer record (It wasn't a Warning or an Error, just an Information) reading:You are running a version of Microsoft SQL Server 2000 or Microsoft SQL Server 2000 Desktop Engine (also called MSDE) that has known security vulnerabilities when used in conjunction with this version of Windows. To reduce your computer's vulnerability to certain virus attacks, the TCP/IP and UDP network ports of Microsoft SQL Server 2000, MSDE, or both have been disabled. To enable these ports, you must install a patch, or the most recent service pack for Microsoft SQL Server 2000 or MSDE from http://www.microsoft.com/sql/downloads/default.asp
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    I installed SQL SP4 and it corrected the problem

  • Content Server error on LINUX (HTTP error: 404 Not Found)

    Hi All,
    While checking the status of content sever by using the T-code CSADMIN I am getting the following error message.
    <b>***********************************************************
    Error : - HTTP error: 404 Not Found
    Message no. CMS025
    Diagnosis
    Error in accessing via HTTP
    404 Not Found
    *************************************************************</b>
    I have done the installation of Content server 640 on Red Hat Linux / MaxDB.
    Moreover I am using the following connection data in CSADMIN.
    HTTP server :- 80.0.0.205
    Port Number:- 1090
    HTTP Script :- ContentServer/ContentServer.dll
    Version no. :- 0046
    Please help me.
    Thanks ,
    Harshal

    Hi Dagmar,
    The HTTP services are working fine. But i m not able to reach the content server url can u help on this?
    Please find the http trace file
    ERROR => PlugInHandleServData: HttpParseRequestHeader failed (rc=701) [http_plg.c   3258]
    ERROR => IcmHandleNetWrite(id=3/4782): HandleServData failed (rc=701) [icxxthrio.c  1833]
    The error i am getting in Content server url is
    Server Error
    404 - File or directory not found.
    The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.

  • Content server certificate verification

    Hello, everybody,
    we would like to use the proxy server as an HTTP-to-HTTPS converter for around 30 URLs/destination servers in a configuration as follows:
    clients (actually another proxy)
    --->HTTP---> web proxy
    --->HTTPS--> firewall
    --->Internet
    We added the forward (http-->https) and reverse (https-->http) mappings in the web proxy already, and they work.
    I'd like to know which certificate/key file is for client requests (not used here, only HTTP), and which is for the outgoing HTTPS requests for content servers, and how exactly content server certificate checking can be manipulated.
    There are:
    (a) a key file in magnus.conf
    (b) a cert database in magnus.conf
    (c) a security setting (on/off) in magnus.conf
    (d) a key file in the Init statement in the obj.conf
    (e) a cert file in the Init statement in the obj.conf
    (f) a security setting (on/off) in the Init statement in the obj.conf
    ...but which is for what?
    The admin document (which I have read up and down) mentions "security" and "encryption", but IMHO fails to state whether the terms refer to incoming requests (which I assume), and which refer to outgoing requests.
    So in more detail:
    1) If I generate a key and put a corresponding certificate into a key file, what is the effect if I mention this file in (a) or (d) above, resp.? Do these entries have to be the same (i.e., do they have to mention the same file)?
    2) In (1), for which connection does the certificate/key apply: to requests incoming from the clients (if HTTPS/SSL were used there), acting as a server certificate, or as client certificate for outgoing requests, or both?
    3) The certificate database in (b) and (e), resp., is it for verifying the client certificates in incoming requests (which is often mentioned), for verifying the content server certificates in outgoing requests (which is hardly ever mentioned), or both? I need to verify the content server certificates, and some of them are issued by strange or own CAs, so I need to add a few CA certificates.
    4) Do I have to add the CA certificates as chain certificates or as CA certificates? "CA certificates" would make sense to me (after all, they are CA certificates), but those are apparently only for client certificate verification, so I added them as chain certificates (a chain of a single element...). Strange that if I click "Do not trust", a certificate that was earlier trusted for client certs is now "only" valid as CA certificate -- as if one was somehow "less" than the other.
    5) With an Equifax server certificate on a certain host, I get a message that the content server allegedly refuses to respond to the connection or may be highly loaded. Using openssl, I can connect from the same host to the content server without problems, in SSL2, SSL3, TLSv1. It makes no difference if the Equifax CA certificate is in the cert database or not, or if "Security" is on or off, or if "Initialize certs only" is checked. Using ssldump, I see that the proxy gives a "bad_certificate" fatal alert to the server. (The list of supported ciphers is a lot shorter with the proxy than with openssl, BTW.) Happens with at least two content servers, both of which can be contacted without problems via openssl, and the server certificates of which can be verified with their corresponding CA certificates I have available.
    6) What does "Security on", "off" and "Initialize certs only" actually do? (...apart from putting a line into obj.conf...)."Security" is such a broad term used in (c) and (f), but does it refer to the client or the content server side? (Yes, I know that SSL provides authentication and encryption, I'm just not sure about how to configure what on the proxy software.) Guess I'm repeating myself here ;-)
    7) I read that there is a tool "certadmin". Is it provided with some other Sun software? (I think with the portal server, right?) I would love to get hold of a tool for really looking into the cert databases (not using the admin server functionality). I also heard of another tool, but don't recall its exact name -- something like idscertutil, or some other *certutil. Does this ring a bell with anybody?
    I'm using proxy 3.6 SP6.
    Any insights are welcome.
    Thanks for your help,
    Stefan

    Gerd,
    Don't know which version of fetchmail comes with 10.3.x and 10.4.x respectively.
    However, older versions would check for an SSL certificate in an opportunistic way and still go ahead if there wasn't one. More recent versions will interrupt comunications.
    In other words, since you do not use SSL you must disable it in fetchmail. If I remember correctly (not 100% sure), you must add:
    sslproto ''
    to .fetchmailrc
    Alex

  • Content Server connection problems

    SAP Content Server connection problems
    I have installed the SAP Content Server on a Windows 2003 server. I connected to the Max DB on the remote server from Database Manager on my PC. I created repositories in R/3 in OAC0 and CSADMIN and saved documents to the Content Server. This all took a few hours from O/S install to saving a document in the repository, so I do understand the basics of the Content Server and Max DB.
    Unfortunately we are not going to use Windows; we will be running this on UNIX. Therefore I'm trying it out on a Linux system while I wait for the AIX system to be available. It's been a long road but I have finally gotten the install to finish 'successfully' however I can't connect from R/3.
    When I run the check http://10.XXX.YYY.ZZZ:1090/ContentServer/ContentServer.dll?serverInfo from the browser on the Linux host I get back a good status as shown below:
    serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="0";serverBuild="16";pVersion="0046";serverStatus="running";serverDate="2008-03-25";serverTime="22:39:45";startUpDate="2008-03-25";startUpTime="22:32:21";lastAccessDate="2008-03-25";lastAccessTime="22:38:33";
    However when I do this from any my PC it won't connect. (Of course the real problem is I can't connect from R/3.)
    If I try the same URL from a different user session on the same Content Server Linux host I get the same good status.
    I thought maybe the httpd.conf file was wrong so I tried:
    Listen 0.0.0.0:1090
    In cs.conf I tried commenting out AdminSecurity & AdminSecurityGroup.
    I also changed StorageDriver from SAPDBStorage to FSStorage.
    I don't know if this is related or just another problem to tackle once I can get through this one. I was not able to add the new system to the Database Manager. I get the error "-4 could not connect to socket [10060]".
    Thanks to all for any help. Points will dutifully be rewarded.
    David

    Hi Henk,
    It looks like I am dumber than a rock. The firewall was indeed active on the Linux host. I turned it off and can now do the http connection test to the Content Server. (I awarded very helpful points.)
    I still can't connect to the database with the Database Manager however the message has changed; it now says "-4 XSERVER might be inactive". I just turned off the firewall so I have a few things to try, like figure out how to start MaxDB without the DB Manager. I'll post my progress. Thanks Henk.
    David
    Edited by: Dave Hill on Mar 28, 2008 12:00 AM
    Now I have installed the Database Studion on my PC. No I'm getting this message when I try to connect to the host/database on the Linux system: "Cannot connect to host 10.XXX.XXX.XXX:7210 [Connection refused: connect], -813."
    Does MaxDB need to be started to connect? Any idea how to start it manually? Thanks,
    David
    Edited by: Dave Hill on Mar 28, 2008 1:06 AM
    Ah, at long last. There's this tiny yet very important little program called x_server that SAP didn't include in the SAP Content Server install guide. This needs to be running in order for anything to connect. I'm sure most of you know about it but for the rest you can find it in:
    /sapdb/programs/bin
    Then type
    ./x_server start
    I'm not sure what user it should run under but I started it as the sdb user.
    You could automate the database startup with a script. See http://maxdb.sap.com/doc/7_7/e9/005dac1592496783e26133eb7fad0b/frameset.htm
    Thank you Henk, I'll call this problem solved and award points.
    Edited by: Dave Hill on Mar 28, 2008 2:10 AM

  • ECM11g: How to enforce HTTPS access for Content server console

    Hi,
    We have a requirement of accessing Content Server console (https://<hostname>:<port>/cs) with https protocol only. If a user sends a http request (http://<hostname>:<port>/cs) it should get converted to https.
    The managed server is running with non SSL port. The request is comming from Apache where we have used the parameter "WLProxySSL" to enforce the https, however its not getting enforced for Content Server URL.
    Any help in this regard is highly appreciated.
    Thanks.

    Sorry, I forgot to say that
    i don't want to use the popup
    window that appears when JWS
    encounter an URL that requires
    basic authentication.
    In fact, I don't want to have to enter
    login/password for updates each time
    I start my application with JWS.

  • SSIS Job is getting failed with an error "0x00000005 : Failed to compiled scripts contained in the package.

    Hi All. Could anyone resolve my issue.
    I was created a package with an Script task written in VB.Net.
    The Package was executing Successfully in BIDS.
    But when i tried to exceute the same using Sql server Agent Job, Its getting Failed with the below error message
    "Executed as user: Admin. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 32-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  5:12:27 PM  Error: 2013-03-13 17:12:32.33    
    Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors. 
    End Error  Error: 2013-03-13 17:12:32.33     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict
    in class 'ScriptMain'., ScriptMain.vb, 156, 22  End Error  Error: 2013-03-13 17:12:32.36     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: The binary
    code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.  End Error  Error: 2013-03-13 17:12:34.28     Code: 0x00000005    
    Source: Formating Excel Sheet Formating Excel Sheet     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.  End Error  Error: 2013-03-13 17:12:34.28    
    Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict in class 'ScriptMain'., ScriptMain.vb, 191, 22  End Error 
    Error: 2013-03-13 17:12:34.29     Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: The binary code for the script is not found. Please open the script in the
    designer by clicking Edit Script button and make sure it builds successfully.  End Error  Error: 2013-03-13 17:12:51.56     Code: 0x00000004     Source: Checking Alcon Files      Description:
    The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.  End Error  Error: 2013-03-13 17:12:51.56     Code: 0xC0024107    
    Source: Checking Alcon Files      Description: There were errors during task validation.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  5:12:27 PM  Finished: 5:12:51 PM 
    Elapsed:  24.336 seconds.  The package execution failed.  The step failed."
    Please give some solution to this.
    Thanks in advance

    Are you editing this job in SQL 2012? Is it wrapping your paths in \"? Like for example does the command line tab on the step look like this:
    /FILE "\"D:\yourPathGoesHere.dtsx\""  /CONFIGFILE "\"D:\yourPathGoesHere.dtsConfig\"" /CHECKPOINTING OFF /REPORTING E
    That's the problem I had, and I resolved it by recreating the whole thing via SQL Script and getting rid of all those \" things. I think that is preventing SSIS from looking up the precompiled binaries for your Script Task. So you should edit the command
    line manually:
    /FILE "D:\yourPathGoesHere.dtsx"  /CONFIGFILE "D:\yourPathGoesHere.dtsConfig" /CHECKPOINTING OFF /REPORTING E
    Please write back whether that helps you. David Dye's answer didn't help me at all.

Maybe you are looking for

  • The wait time and resolve time is DEPLORABLE

    Today is the third day in a row I have called into Verizon for the same issue. Day one spent 25 minutes on hold and NEVER got to speak to a person before I hung up. Day 2 Had a 15 minute hold before I spoke with someone, who then told me I had to spe

  • File Not Found after soket transfer

    I have code written to upload a file to the server. the file uploads fine when i dont specify the dir. It uploads to the server current dir, but when i try to upload it to directory "tmp/uniqueDir/filename" that i create in my code i get filnotfound

  • IMessage and Facetime "waiting for activation" on iPhone4s (Brazil)

    I've had an iPhone 3GS for 3 years, had iMessage working perfectly. On march 16th, i bought an iPhone 4S from my supported carrier, TIM. Since then, I cannot activate my phone number neither in iMessage nor in Facetime. If I log in my Apple ID, both

  • IMac i5 as slow as can be and then some

    Got an i5, had it two weeks, works fine (2nd one) no worries, had a software issue, couldn't find a file to delete and so on. So, today I decided enough was enough and to erase the drive and reinstall Snow Leopard from the Apple disc that came with t

  • Relation between Accounting Document between Asset Document

    Dear Experts, We are developing a report and need some help. In which table can we find both the Asset document and its corresponding Accounting document?? Thank you regards KAP