Continued Error 800706F7 during Windows Update

I've been trying to perform Windows Updates for several weeks but receive error
800706F7 each time. I've scoured forums and Windows Fixits trying to find a solution and 99% of the time I'm pointed to the
3004394 Root Certificate update from December 2014 as being the culprit. Uninstalling this update normally allows updates to be downloaded and installed- the problem is fixed.
This is not the case in my situation. Below are some of the steps I've tried to try to resolve the issue:
Run 3004393 uninstall tool (doesn't work)
Try to install 3004394 so I can remove it again (can't install)
Windows Update Standalone Package
Windows Update Diagnostic tool
Start / stop: BITS, Crypto, Windows Update
System File Check (says there are corrupt files but cannot repair)
Check Disk
Clearing Windows/SoftwareDistribution folder
Various Windows Update Fixits from Microsoft.com
Uninstall .NET Framework 4.5.2
Re-validating Windows
Reviewing CBS.log, WindowsUpdate.log and a few other log files. I couldn't determine anything from them though.
After each of those attempts, and what seems like a hundred restarts, the problem remains. Any help would be much appreciated- I've spent way too much time trying to fix this!

Hi jpinney,
Some required information are needed for us to help you.
Please make sure your system wasn't cloned from another hard disk and time zone was set correctly, temporarily disable firewall for good measure.
We might need your Windows update troubleshooter results and SFC details for this issue
Run findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >sfcdetails.txt in Command Prompt after SFC /scannow so you could get a detail report in C disk.
If SFC cannot fix your system corruption, you might need to manually replace the corrupted file with a known good copy of the file.
Also try fixing Windows corruption errors by using the DISM or System Update Readiness tool
https://support.microsoft.com/en-us/kb/947821
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Error 80080005 during windows update on Server 2008 R2 Datacenter

I have tried MS fix it to no avail. I still can't install Windows update.
I did have problems with pofiles being corrupted and wonder if this is related, but I am stuck.
What is the next step in trying to get Windows Update to work?
Thanks
~Randy

This forum is for a graphics library.
For help in using windows servers, visit the forums on technet.
Visual C++ MVP

Error message during OS update

I keep getting an error message during the update for my ipad2. it tells me an error occurred and if i continue everything will be lost on the ipad. any ideas as to what i should do?

I finally fixed it. I still had some purchased items that weren't transferred. Once I transferred them all, I connected the usb directly to my computer and turned off my firewall. All seemed to work.

Error code 800f0900 windows update

request: can someone please help me with this windows update issue? thank you<o:p></o:p>
error code 800f0900 windows update <o:p></o:p>
have: windows 7 ultimate<o:p></o:p>
tried:<o:p></o:p>
MicrosoftFixit.wu.LB.193479011044059.1.1.Run<o:p></o:p>
Windows6.1-KB947821-v34-x64<o:p></o:p>
WindowsUpdateDiagnostic<o:p></o:p>
Windows Update troubleshooter <o:p></o:p>

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is only one forum among the many
that are on the TechNet Discussion Forums, and given your post, you likely chose the wrong forum. This is a standard response I’ve written up in advance to help many people (thousands, really.) who post their question in this forum in error, but please
don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more
detail about your problem, that could include screenshots of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…?
forum and it’s here: http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks
MSDN and TechNet Subscriptions Support
Did Microsoft call you out of the blue about your computer?
No, they didn't.

Error message during software updates

I am constantly receiveing the following error message during software updates. This time it happened with an HP printer update, but it has happened with iTunes and Safari as well. Does anyone know what I need to do?
The system extension “/System/Library/Extensions/GeneIOUSBCFSubclass.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update
Thanks!

Try using Help > Updates from one of your CS6 applications.
When you return home, you might try uninstalling CS6 and reinstalling it again. It sounds like some stuff may have become corrupted.

80246002 error after installing Windows Update Agent 7.6.7600.320

This problem prevents Windows Update from being able to search, download, and install updates.
I am experiencing this issue on machines running Server 2008 R2 and Windows 7 Enterprise (I imagine this an issue with Windows Update and not the OS so this is probably affecting other OS' as well).
This problem is becoming widespread quickly.
The proposed fix (method 1) in the article below did not resolve the problem:
http://support.microsoft.com/kb/958056/en-us
Note: Method 2 is not viable when applying more than one update at a time especially when you are updating multiple machines.
Several others are posting similar problems:
http://windowsitpro.com/windows-update/tracking-error-80246002-windows-update-problem
http://forums.techguy.org/windows-7/1132320-windows-update-problems-4.html
This is preventing scheduled server maintenance from being performed.
Could this be a targeted attack? Happening at the end of the week before a long holiday weekend is not leaving me with a very good feeling...
I would hope that fixing this issue would be a very high priority.
BTW - There is no "Windows Update Issue" forum category that I could find - If there is, sorry for posting in the wrong area.
Cheers,
Jeff

My fix that worked...
Reviewed the operational log for the WindowsUpdateClient (buried in the Event viewer here:
Application and Services Logs -> Microsoft -> Windows -> WindowsUpdateClient -> Operational
After review, I noticed that event 30 "Windows Updates established connectivity" was no longer occurring and that event 42 "There has been a change in the health of Windows Update" was the only thing after the error (Event 25 "Windows Update failed
to check for updates with error 0x80246002")
Even though the machine was restarted after applying the "Windows Update Agent 7.6.7600.320" patch and I had tried restarting the Windows Update service, the service appears to be hung.
Solution:
1.) restart the Windows update service
2.) monitor the operational log for the WindowsUpdateClient (refreshing every 5-10 seconds)
3.) verify that event 30 happens (you should see event 38 after restarting the service followed by (2) event 42, then event 30)
4.) Once event 30 happens go to the Windows update GUI and run the "Check for updates" - yay!
5.) You can go back into the operational log and see event 26 "Windows Update successfully found x updates" followed by an event 40 for each update found.
What is really strange is that I checked the first machine that experienced the problem and it magically fixed itself.
It seems like this may have been caused by DDOS attack on the source for windows updates that the Windows Update service connects to. Or the source location was having maintenance performed.
Regardless, in my case, this was not a problem with the OS or the patch but the inability for the Windows Update Service to establish connectivity.
Hope that helps somebody :)
Cheers,
Jeff

Error code 80070103 during Windows Update

I have Windows Vista Home Premium installed as the OS in my T61p. Today, Windows Update showed the follwoing two updates available:
-- Update for Windows Live Sign-in Asistant (KB 967912) -- Important
-- Lenovo - Other hardware - ThinkPad PM Device -- Recommended
The first one (Windows Live Sign-in Assistant) installed with no problems.
The second one (ThinkPad PM Device) failed installation and the following error message was provided:
Code 80070103 -- Windows Update encountered an unknown error.
It amazes me that Microsoft offers a specific update to my system and then, when it fails installation, all it can provide is a message about an unknown error...
After some research, it is still Microsoft itself that suggests I contact the hardware manufacturer for further assistance...
I am not aware of any problem with my system, so I'm tempted to just discard the update.
But, out of curiosity, I wonder what those PM initials (as in ThinkPad PM Device) stand for and also whether anyone has ever encountered this same problem and/or can provide any insights into the real meaning of the error message.
Thanks in advance for any feedback.

homerhat,
I migrated to Windows 7 last December, a few weeks after I posted my cry for help... And I must say that one of the reasons I did it was that I was experiencing too many issues with Vista, especially with several WIndows updates that were just refusing to install. I tried everything, including on this forum and on Microsoft's forum, but no answers whatsoever were being received.
In one instance, a good soul accompanied my plight with a number of messages with as many suggestions, but nothing worked. I was getting really frustrated.
After moving to Windows 7, though, (I cross my fingers...) I did not encounter any situation of failed updates, so far.
But I think it was a great thing for you to post your experience even after you had resolved your issue. It may benefit someone along the road ant this, I think, is what these forums are all about.
This said, there are more responsive and less responsive forums and this Lenovo Community Forum, in my humble opinion, has known better times than in recent months. This is just my sincere opinion, based on my personal observation. I may be (and I wish I am) wrong.
Cheers!

Vista Home Premium - Error code 80070490 - Windows update

Computer - Satellite 200
Operating system - Vista Home Premium (service pack 1)
Problem - When I try to update from Windows Update (both manual and automatic) I get error code 80070490
I have tried - System restore, downloading and paying for "RegCure" and following instructions on Microsoft forum all without success.
The computer was supplied with a recovery disk which does not have "repair" facility.
If you have a solution that does not involve a full re-load I would be very grateful
Please make instructions comprehensible to a non-techno!
Thank you

This error may occur if the older Windows Update engine files cannot be
replaced by Windows Update Agent 3.0 (7.0.6000.374).
To troubleshoot this issue, I suggest we first reset permission and
reinstall Windows Update Agent 3.0.
Step 1: Reset permission
================
1. Please download the subinacl.msi file from the following link and save
the installation patch onto the Desktop:
http://www.microsoft.com/downloads/d...inityDownloads
2. Please go to the Desktop and double click the downloaded file.
3. Please select the C:\Windows\System32 folder as the Destination Folder
during the installation. Later we will use this tool to reset the permission
settings on the current machine.
Note: If UAC (User Account Control) window is prompted for permission to
continue, please click Continue.
4. Click the Start Button, in the Start Search bar, type: "notepad" (without
quotes) and press Enter.
5. Copy the following commands and then paste them into the opened Notepad
window:
@echo off
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=system=f
subinacl /subdirectories %SystemDrive% /grant=system=f
@Echo =========================
@Echo Finished.
@Echo =========================
@pause
6. After pasting the above commands, please close the Notepad window. Choose
Save when you are prompted to save the file. Type "reset.bat" as the file
name and choose Desktop from the left panel as the save location.
7. Refer to the Desktop and right click the reset.bat file, then choose "Run
as administrator."
8. You will see a DOS-like window processing.
NOTE: It may take several minutes, please be patient. When it is finished,
you will be prompted with the message: "Finished, press any key to continue".
Step 2: Reinstall Windows Update Agent 3.0
===========================
1. Please download the file from the following link:
Windows Vista (32bit)
http://download.windowsupdate.com/v7...gent30-x86.exe
Windows Vista (64bit)
http://download.windowsupdate.com/v7...gent30-x64.exe
2. Save the file to D: drive.
Note: Please select a drive where Windows Vista was not loaded because the
file cannot be launched directly from the system root directory.
3. Click Start->Run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce"
(without quotations) and then press Enter to install the Windows Update
engine.
Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and
"/wuforce"
Now, let's run Windows Update again.

Error 1620 During AIR Update and AIR App updates

On of our customers is having repeated problems installing our application update on Windows XP SP3. I checked the install.log and see that the most recent error he is getting is Windows Installer Error 1620, but my research has not turned up very much helpful information about that error. Do you know what might cause this?
An excerpt from his log file is below.
Many thanks for your help,
Taylor
Log File:
2010-12-04:20:09:15] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
[2010-12-04:20:09:16] Runtime Installer begin with version 2.5.0.16600 on Windows XP x86
[2010-12-04:20:09:16] Commandline is: -updatecheck
[2010-12-04:20:09:16] Installed runtime (2.5.0.16600) located at c:\Program Files\Common Files\Adobe AIR
[2010-12-04:20:09:17] Performing pingback request
[2010-12-04:20:09:18] Starting runtime background update check
[2010-12-04:20:09:18] Clearing unused background update directory
[2010-12-04:20:09:18] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows5.1/x86/patch/2.5.0.16600/update
[2010-12-04:20:09:18] Unpackaging http://airdownload.adobe.com/air/3/background/windows5.1/x86/patch/2.5.0.16600/update to C:\Documents and Settings\jlane\Application Data\Adobe\AIR\Updater\Background
[2010-12-04:20:09:51] Application Installer begin with version 2.5.0.16600 on Windows XP x86
[2010-12-04:20:09:51] Commandline is: -update "d:\program files\ynab 3\ynab 3\ynab 3.exe" "C:\Documents and Settings\jlane\Application Data\com.youneedabudget.YNAB3.Live.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1\Local Store\#ApplicationUpdater\update.air" 3.2.3.2698
[2010-12-04:20:09:51] Installed runtime (2.5.0.16600) located at c:\Program Files\Common Files\Adobe AIR
[2010-12-04:20:09:51] Installed app (com.youneedabudget.YNAB3.Live.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1) located at d:\program files\ynab 3\ynab 3\ynab 3.exe
[2010-12-04:20:09:52] Unpackaging file:///C:/Documents%20and%20Settings/jlane/Application%20Data/com.youneedabudget.YNAB3.L ive.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1/Local%20Store/%23ApplicationUpdater/update. air to C:\Documents and Settings\jlane\Local Settings\Temp\fla6D.tmp
[2010-12-04:20:09:58] Application signature verified
[2010-12-04:20:09:58] Unpackaging/validation complete
[2010-12-04:20:09:58] Converting unpackaged application to a native installation package in C:\Documents and Settings\jlane\Local Settings\Temp\fla6E.tmp
[2010-12-04:20:10:14] Native installation package creation succeeded
[2010-12-04:20:10:14] Starting app update of d:\program files\ynab 3. Updating from com.youneedabudget.YNAB3.Live.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1 version 3.1.9.2503 to com.youneedabudget.YNAB3.Live.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1 version 3.2.3.2698 using the source file at file:///C:/Documents%20and%20Settings/jlane/Application%20Data/com.youneedabudget.YNAB3.L ive.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1/Local%20Store/%23ApplicationUpdater/update. air
[2010-12-04:20:10:14] Installing msi at C:\Documents and Settings\jlane\Local Settings\Temp\fla6E.tmp\setup.msi with guid {F4E5BC2E-2C23-9DAC-66D6-793C49DE6C10}
[2010-12-04:20:10:14] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1620" errorID=0]
[2010-12-04:20:10:14] Rolling back install of C:\Documents and Settings\jlane\Local Settings\Temp\fla6E.tmp\setup.msi
[2010-12-04:20:10:14] Rollback complete
[2010-12-04:20:10:14] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1620" errorID=0]
[2010-12-04:20:10:32] Launching subprocess with commandline d:\program files\ynab 3\ynab 3\ynab 3.exe
[2010-12-04:20:10:53] Application Installer end with exit code 7
[2010-12-04:20:11:03] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
[2010-12-04:20:11:04] Runtime Installer begin with version 2.5.0.16600 on Windows XP x86
[2010-12-04:20:11:04] Commandline is: -updatecheck
[2010-12-04:20:11:04] Installed runtime (2.5.0.16600) located at c:\Program Files\Common Files\Adobe AIR
[2010-12-04:20:11:05] Performing pingback request
[2010-12-04:20:11:05] Starting runtime background update check
[2010-12-04:20:11:05] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows5.1/x86/patch/2.5.0.16600/update
[2010-12-04:20:11:05] Unpackaging http://airdownload.adobe.com/air/3/background/windows5.1/x86/patch/2.5.0.16600/update to C:\Documents and Settings\jlane\Application Data\Adobe\AIR\Updater\Background
[2010-12-04:20:11:43] Unpackaging complete
[2010-12-04:20:11:43] Download success
[2010-12-04:20:11:43] Runtime updated downloaded
[2010-12-04:20:11:48] User has selected immediate install of the update
[2010-12-04:20:11:48] Starting runtime background update installation
[2010-12-04:20:11:48] Launching subprocess with commandline C:\Documents and Settings\jlane\Application Data\Adobe\AIR\Updater\Background\updater -update
[2010-12-04:20:11:49] Runtime updater successfully launched
[2010-12-04:20:11:49] Runtime Installer end with exit code 0
[2010-12-04:20:12:01] Runtime Installer begin with version 2.5.1.17730 on Windows XP x86
[2010-12-04:20:12:02] Commandline is: -update
[2010-12-04:20:12:02] Installed runtime (2.5.0.16600) located at c:\Program Files\Common Files\Adobe AIR
[2010-12-04:20:12:10] Starting runtime update. Updating runtime from version 2.5.0.16600 to version 2.5.1.17730
[2010-12-04:20:12:10] Reinstalling c:\docume~1\jlane\locals~1\temp\air72.tmp\setup.msi
[2010-12-04:20:12:10] Error occurred during msi repair operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1620" errorID=0]
[2010-12-04:20:12:10] Rollback complete
[2010-12-04:20:12:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1620" errorID=0]
[2010-12-04:20:12:20] Runtime Installer end with exit code 7
[2010-12-04:20:13:16] Unpackaging complete
[2010-12-04:20:13:16] Download success
[2010-12-04:20:13:16] Runtime updated downloaded
[2010-12-04:20:13:44] User has selected immediate install of the update
[2010-12-04:20:13:44] Starting runtime background update installation
[2010-12-04:20:13:44] Launching subprocess with commandline C:\Documents and Settings\jlane\Application Data\Adobe\AIR\Updater\Background\updater -update
[2010-12-04:20:13:44] Runtime updater successfully launched
[2010-12-04:20:13:44] Runtime Installer end with exit code 0
[2010-12-04:20:13:54] Runtime Installer begin with version 2.5.1.17730 on Windows XP x86
[2010-12-04:20:13:54] Commandline is: -update
[2010-12-04:20:13:54] Installed runtime (2.5.0.16600) located at c:\Program Files\Common Files\Adobe AIR
[2010-12-04:20:14:02] Starting runtime update. Updating runtime from version 2.5.0.16600 to version 2.5.1.17730
[2010-12-04:20:14:02] Reinstalling c:\docume~1\jlane\locals~1\temp\air73.tmp\setup.msi
[2010-12-04:20:14:03] Error occurred during msi repair operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1620" errorID=0]
[2010-12-04:20:14:03] Rollback complete
[2010-12-04:20:14:03] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1620" errorID=0]
[2010-12-04:20:14:07] Runtime Installer end with exit code 7
[2010-12-05:20:36:57] Application Installer begin with version 2.5.0.16600 on Windows XP x86
[2010-12-05:20:36:57] Commandline is: -update "d:\program files\ynab 3\ynab 3\ynab 3.exe" "C:\Documents and Settings\jlane\Application Data\com.youneedabudget.YNAB3.Live.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1\Local Store\#ApplicationUpdater\update.air" 3.2.3.2698
[2010-12-05:20:36:57] Installed runtime (2.5.0.16600) located at c:\Program Files\Common Files\Adobe AIR
[2010-12-05:20:36:57] Installed app (com.youneedabudget.YNAB3.Live.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1) located at d:\program files\ynab 3\ynab 3\ynab 3.exe
[2010-12-05:20:36:58] Unpackaging file:///C:/Documents%20and%20Settings/jlane/Application%20Data/com.youneedabudget.YNAB3.L ive.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1/Local%20Store/%23ApplicationUpdater/update. air to C:\Documents and Settings\jlane\Local Settings\Temp\flaDB.tmp
[2010-12-05:20:37:09] Application signature verified
[2010-12-05:20:37:09] Unpackaging/validation complete
[2010-12-05:20:37:09] Converting unpackaged application to a native installation package in C:\Documents and Settings\jlane\Local Settings\Temp\flaDC.tmp
[2010-12-05:20:37:19] Native installation package creation succeeded
[2010-12-05:20:37:19] Starting app update of d:\program files\ynab 3. Updating from com.youneedabudget.YNAB3.Live.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1 version 3.1.9.2503 to com.youneedabudget.YNAB3.Live.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1 version 3.2.3.2698 using the source file at file:///C:/Documents%20and%20Settings/jlane/Application%20Data/com.youneedabudget.YNAB3.L ive.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1/Local%20Store/%23ApplicationUpdater/update. air
[2010-12-05:20:37:19] Installing msi at C:\Documents and Settings\jlane\Local Settings\Temp\flaDC.tmp\setup.msi with guid {F4E5BC2E-2C23-9DAC-66D6-793C49DE6C10}
[2010-12-05:20:37:20] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1620" errorID=0]
[2010-12-05:20:37:20] Rolling back install of C:\Documents and Settings\jlane\Local Settings\Temp\flaDC.tmp\setup.msi
[2010-12-05:20:37:20] Rollback complete
[2010-12-05:20:37:20] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1620" errorID=0]
[2010-12-05:20:37:32] Launching subprocess with commandline d:\program files\ynab 3\ynab 3\ynab 3.exe
[2010-12-05:20:37:52] Application Installer end with exit code 7
[2010-12-08:13:28:56] Application Installer begin with version 2.5.0.16600 on Windows XP x86
[2010-12-08:13:28:56] Commandline is: -update "d:\program files\ynab 3\ynab 3\ynab 3.exe" "C:\Documents and Settings\jlane\Application Data\com.youneedabudget.YNAB3.Live.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1\Local Store\#ApplicationUpdater\update.air" 3.2.3.2698
[2010-12-08:13:28:56] Installed runtime (2.5.0.16600) located at c:\Program Files\Common Files\Adobe AIR
[2010-12-08:13:28:56] Installed app (com.youneedabudget.YNAB3.Live.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1) located at d:\program files\ynab 3\ynab 3\ynab 3.exe
[2010-12-08:13:28:57] Unpackaging file:///C:/Documents%20and%20Settings/jlane/Application%20Data/com.youneedabudget.YNAB3.L ive.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1/Local%20Store/%23ApplicationUpdater/update. air to C:\Documents and Settings\jlane\Local Settings\Temp\fla7F.tmp
[2010-12-08:13:29:19] Application signature verified
[2010-12-08:13:29:19] Unpackaging/validation complete
[2010-12-08:13:29:19] Converting unpackaged application to a native installation package in C:\Documents and Settings\jlane\Local Settings\Temp\fla80.tmp
[2010-12-08:13:29:31] Native installation package creation succeeded
[2010-12-08:13:29:31] Starting app update of d:\program files\ynab 3. Updating from com.youneedabudget.YNAB3.Live.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1 version 3.1.9.2503 to com.youneedabudget.YNAB3.Live.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1 version 3.2.3.2698 using the source file at file:///C:/Documents%20and%20Settings/jlane/Application%20Data/com.youneedabudget.YNAB3.L ive.9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1/Local%20Store/%23ApplicationUpdater/update. air
[2010-12-08:13:29:31] Installing msi at C:\Documents and Settings\jlane\Local Settings\Temp\fla80.tmp\setup.msi with guid {F4E5BC2E-2C23-9DAC-66D6-793C49DE6C10}
[2010-12-08:13:29:31] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1620" errorID=0]
[2010-12-08:13:29:31] Rolling back install of C:\Documents and Settings\jlane\Local Settings\Temp\fla80.tmp\setup.msi
[2010-12-08:13:29:31] Rollback complete
[2010-12-08:13:29:32] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1620" errorID=0]
[2010-12-08:13:44:09] Launching subprocess with commandline d:\program files\ynab 3\ynab 3\ynab 3.exe
[2010-12-08:13:44:55] Application Installer end with exit code 7

Hi Chris,
Thanks so much for the quick response. After he investigated further, he determined that it was Comodo Internet Security Premium. He disabled it, uninstalled, and then reinstalled both AIR and You Need a Budget (our product), and it worked great after that! Thanks again for the quick response.
Best regards,
Taylor

Error Code 80072F8F- windows update fails

Every time I try to update windows it shows eror with Code 80072F8F. I uninstalled Mcafee and tried to update, same error occurred. My system clock shows correct time.
I recently upgraded from 32-bit Vista Home premium (Dell) to 32-bit 7 Home premium using the Dell 7 Upgrade DVD.
I have core to duo Intel T6400 (2 GHz) Processor, 3GB RAM, 128MB NVidia Graphics memory and 250 GB Hard Drive.

HI
Disable any anti-virus application or firewall on the computer temporarily.
Manually download the update files and then install it from the hard
disk.
Please pick the updates from the website of Microsoft Download Center:
http://catalog.update.microsoft.com/v7/site/Home.aspx
General Windows Update Troubleshooting
The following outlines how to stop services pertaining to Windows Update, rename system folders, register related DLL files, and then restart the previously mentioned services. This troubleshooting generally applies to all Windows Update related issues.
Stopping services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then press ENTER after each command.
        net stop wuauserv
        net stop bits
net stop cryptsvc
Please do not close the Command Prompt window.
Renaming folders pertaining to Windows Update
1.     At the command prompt, type the following commands, and then press Enter after each command:
2.     ren %systemroot%\System32\Catroot2 Catroot2.old
3.     ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
4.     Please do not close the Command Prompt window.
Registering DLL’s pertaining to Windows Update
1.     Please copy and paste the following text into a new Notepad document, and save the file as WindowsUpdate.BAT
2.     If saved correctly the icon will change from a Notepad file to BAT file which has two blue cogs as its     icon.
   -or-
3.     You can manually type each command at the command prompt:
        regsvr32 c:\windows\system32\vbscript.dll /s
        regsvr32 c:\windows\system32\mshtml.dll /s
        regsvr32 c:\windows\system32\msjava.dll /s
        regsvr32 c:\windows\system32\jscript.dll /s
        regsvr32 c:\windows\system32\msxml.dll /s
        regsvr32 c:\windows\system32\actxprxy.dll /s
        regsvr32 c:\windows\system32\shdocvw.dll /s
        regsvr32 wuapi.dll /s
        regsvr32 wuaueng1.dll /s
        regsvr32 wuaueng.dll /s
        regsvr32 wucltui.dll /s
        regsvr32 wups2.dll /s
        regsvr32 wups.dll /s
        regsvr32 wuweb.dll /s
        regsvr32 Softpub.dll /s
        regsvr32 Mssip32.dll /s
        regsvr32 Initpki.dll /s
        regsvr32 softpub.dll /s
        regsvr32 wintrust.dll /s
        regsvr32 initpki.dll /s
        regsvr32 dssenh.dll /s
        regsvr32 rsaenh.dll /s
        regsvr32 gpkcsp.dll /s
        regsvr32 sccbase.dll /s
        regsvr32 slbcsp.dll /s
        regsvr32 cryptdlg.dll /s
        regsvr32 Urlmon.dll /s
        regsvr32 Shdocvw.dll /s
        regsvr32 Msjava.dll /s
      regsvr32 Actxprxy.dll /s
        regsvr32 Oleaut32.dll /s
        regsvr32 Mshtml.dll /s
        regsvr32 msxml.dll /s
        regsvr32 msxml2.dll /s
        regsvr32 msxml3.dll /s
        regsvr32 Browseui.dll /s
        regsvr32 shell32.dll /s
        regsvr32 wuapi.dll /s
        regsvr32 wuaueng.dll /s
        regsvr32 wuaueng1.dll /s
        regsvr32 wucltui.dll /s
        regsvr32 wups.dll /s
        regsvr32 wuweb.dll /s
        regsvr32 jscript.dll /s
        regsvr32 atl.dll /s
        regsvr32 Mssip32.dll /s
Restarting services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then
press ENTER after each command.
        net start wuauserv
        net start bits
        net start cryptsvc
   exit
now try running updates see that if the issue can be resolved
Regards
Nikhil

Error 0x80248014 on Windows Update on Windows 10 Technical Preview Enterprise beta build 9926.

Hi
As I download the new ISO and do a software Windows Updates.
I cannot seems to get any software updates at my end. Windows update cannot find any updates for Windows Defender.
My latest Windows 10 Technical Preview version 9926 cannot seems to find any software updates.
I keep getting this error.0x80248014!
I keep getting this error since I have the first Beta Build 9841 and 9879. I did not have the download of 9860.
I wonder there is a missing Windows Update at the Control Panel.
I have to search all over the place where is the Windows Update??? The GUI is very confusing for a First Timer like me!
See my screen capture.

mrdbeta,
Click the Retry button > if you have a Windows defender Update available, it will show up on the list together with a new build such as 9935 Professional. (See my screenshot at the end of the post.)
The system will start installing and when it finishes, it will give you the same error message. That's OK. It shows the error message because it is unable to install the new build which is NOT applicable to
us, the general users. Those new builds, 9931, 9932, 9934, and lately 9935 are meant for MSFT only.
Click Advanced options > click View your updates history. Your most recent Windows Defender update should be listed. If yes, you are OK. Nothing to worry about.
MS is well aware of the mistake. They will get it fixed soon. Please read the excerpt below from Inside Hub......
Windows Insiders who have installed KB3035129 may see reports in the Settings app under Update & recovery that a new preview build is available. Attempts to download the new build result in Error 0x80246017.
KB3035129 included a code change which unintentionally had the side effect of changing targeting for builds, allowing builds that are exclusive to Microsoft employees to appear available. No new builds are available which are newer than 9926 at this point.
We will issue another update shortly to correct the issue and ensure that Windows Insiders are able to successfully get the next build which is made available to you. We apologize for the confusion and thank you for your continued participation
and feedback.
***** In the web, there is a registry modification dealing with this issue. I would suggest that you just wait for MS to sort it out. If you want to try the registry hack, google for it. Use it at your own risk

Stop error 0x7b after windows updates 10/14-10/15/2014

Last evening we received the new windows updates.. This morning we found that we had several of our older (desktop only) Dell model pc's (Example: Dell 755) were showing the Windows Error Recovery screen.. Most of our users ran the startup repair
and this had 2 results.. One the scan found nothing and upon the next boot went right back to the Recover Screen or two if they attempt to start Windows normal are receiving a 0x0000007b (0x80786b58, 0xc0000034, 0x00000000, 0x00000000)
I have done some research on the web and have found several solutions:
The possibility of the update changing the SATA controller of RAID controller settings: This is not the case for us
HKEY_LOCAL_MACHINE\SYSTEM.....\msahci-iastor-iastorV\Start settings: They are all currently set to 0 as stated
I have been trying to locate a way to remove the updates via Hirens 15.2 but can not run the location .exe for the updates to remove and we currently have no backup points set. I have run the Chkdisk and repair from both local and also the Software CD and
this found nothing wrong..
All of these machines are / were running Windows 7 Enterprise amd64
We have 170 of these machines in production and are rushing for a solution or temp fix while attempting to find newer replacements without the issue.
Any help would be greatly appreciated and thank you in advance

Hi,
Windows directly boot into Recovery Mode should be also caused by Windows boot file (maybe bcd file problem), under this condition, it won't about to boot into system.
According to the MSDN Library about 0x7B:
http://msdn.microsoft.com/en-us/library/windows/hardware/ff559218(v=vs.85).aspx
The INACCESSIBLE_BOOT_DEVICE bug check has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.
Cause:
The INACCESSIBLE_BOOT_DEVICE bug check frequently occurs because of a boot device failure. During I/O system initialization, the boot device driver might have failed to initialize the boot device (typically a hard disk). File system initialization might
have failed because it did not recognize the data on the boot device. Also, repartitioning the system partition or installing a new SCSI adapter or disk controller might induce this error.
This error can also occur because of incompatible disk hardware. If the error occurred at the initial setup of the system, the system might have been installed on an unsupported disk or SCSI controller. Some controllers are supported only by drivers that are
in the Windows Driver Library (WDL). (These drivers require the user to do a custom installation.)
The library also contains some effective solution with this problem, please follow its introduction to make troubleshooting for test.
Roger Lu
TechNet Community Support

Win 7 PC freeze and block network access for other PC on same switch during windows update from WSUS

Hello,
It's been a problem for me for a long time now, but the last time (today) I found 3 PC on 2 different switches that block all the network on this 2 switches during the update.
I have a Domain with 80 PC with Win 7 (32&64bit) that takes the updates from the WSUS server that is configured on a Win2k8 r2. The system works well from 2 years from now but sometimes cause this errors that make me look like a dummy in front of angry
employees. If one of the PC get freeze , it will cause lost of connection on all the PC on same switch, and i have to find the blocked PC, remove from network, restart switch and hope that they will came back on.
Does anyone experienced this problem? Any help will be appreciated
Thank you!
List of updates for today below

Hi
Thanks for your response, yes I understand that the result is a Broadcast Storm and yes I have the cheapest switch on market :/.
The interest fact is that on one PC, I changed everything and keep only the old HDD and on last updates yesterday it was one of the blocked one too. So this make
me doubt that is something wrong in software on that PC. I don't have any third-part programs except browsers and all have Genuine Win7
The only investigation remained is what happens during the update process?
Is WSUS involved in something?
And another thing is the fact that some of the PC are cloned, but I have carefully changed the SID
Thank you for your support

Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

Error when using windows update to upgrade to build 10061

When I use windows update to upgrade to Build 10061 it goes all the way through downloading but as soon as it gets to the installation it errors out. The error code given is 8024201C. Any help would be appreciated.

Hi Wishing,
What is your current situation?
This issue might be caused by 3rd-party software handles, you may take a try to run Windows 8.1 update assistant and see what it says:
Upgrade Assistant: FAQ
Let us know the results.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Continued Error 800706F7 during Windows Update

Similar Messages

Maybe you are looking for