Continuous play not working

I'm having trouble with my playlists. Somehow my setting have been changed so that songs will play one after the other. The boxes beside the song names are no longer checked. I started to go through and check them so the songs would play but if I continue to do that, it will take forever!
Does anyone know how to check all the song names without going through one by one?
Also as I've gone through to check the songs individually some of them are getting a little exclamation mark next to the song name (to the left). What does that mean?
IBM Thinkpad   Windows XP  

Following the advice of this list, I did a restore trying to make my Nano play podcasts consecutively. Now the Nano will not load my Podcasts! It says there is not enough room. The only option in a dialog is to sync songs. I never load songs, only Podcasts.
It was loading Poscasts just fine, but it would not play them consecutively.
How do I get back to where I was, loading new content. My Itunes has way more than can be loaded but most has been listened to. New is less than the amount that would fit on the 4G Nano. Before the restore, one third of the Nano was empty.
I am using iTunes 7.02. There seems to be very few controls for Podcasts. It makes it very confusing as most tabs and options have to do with songs. It is not very clear when options and tabs apply also to Podcasts.
Restore was a bad idea, but many of the Podcasts are 10 to 15 mins. long. It is a real pain trying to sit back and enjoy when you have to go find the next to listen to every few minutes. I tried making a playlist and that did not work.
I have over three years of Podcasts stored in my iTunes, why after a restore, did the Nano not just reload where it left off?
How do I get it to just load the new stuff?
How do I get it to play consecutively?
G4 dual   Mac OS X (10.3.9)  
G4 dual   Mac OS X (10.3.9)  

Similar Messages

  • Continuous play not working for songs transferred to another computer

    I purchased a few albums via iTunes. When I changed computers and synced my iPod with the new computer I lost the continuous album play for the songs in these albums. If I play any song from any of these albums and when that song is completed play stops.
    I do not have this problem with any copied/ripped CD music, just the music purchased from iTunes.
    I did try setting the song option for continuous album play but to no avail.
    Any ideas?

    Are there check marks beside all the songs? Unchecked songs have to be clicked on individually to play them, checked songs will play one after the other. If you hold down the CRTL key and click beside any song in your list then all the check boxes can be toggled on or off: iTunes - Keyboard Shortcuts for Windows

  • Play ends when song ends - Shuffle and Continuous Play not working

    I'm pretty sure I did not install an update prior to this starting. Since the problem began, however, I uninstalled iTunes and reinstalled to see if that would solve the problem and it did not.
    I typically play songs, on shuffle, from my main library. When I open iTunes shuffle is automatically selected and I click on the play button to choose a random song. Since this past thursday when I click the play button nothing happens. I have to manually choose a song to play. Once the song has ended iTunes does not choose another song (if on shuffle) nor does it play the proceeding song on the list (if on normal play). In order to play another song I have to choose another. Once that song ends I have to select another and so on.
    I have checked the settings and I don't see anything that could be effecting the way iTunes plays the songs.

    *Figured it out*
    Somehow, all of my songs where not checked....

  • My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

    My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

    I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
    http://www.apple.com/retail/geniusbar/

  • Downloaded yosemite continuity is not working with my iPhone 6.  Both on same wifi network and iCloud account.. not sure how to set it up any help is appreciated

    downloaded yosemite continuity is not working with my iPhone 6.  Both on same wifi network and iCloud account.. not sure how to set it up any help is appreciated

    Connect your iPhone, iPad, iPod touch, and Mac using Continuity

  • MBP will not register with iCloud servers (and most iCloud features + Handoff and Continuity do not work)

    Hi all,
    I have an extremely strange issue on my rMBP which has not been solved yet despite over 2 hours on the phone with Apple support, and another hour after being put through to a Senior Advisor, and several online chats.
    I have a Apple Certified Refurbished Late 2013 Retina Macbook Pro, which has a 2.3Ghz i7, 16GB of RAM, 500 Flash Storage and the NVIDIA discrete graphics. It was purchased in December 2014 on the Apple Store. It is running 10.10.2.
    For some reason, my computer WILL NOT register with iCloud. Messages and Facetime both would not work, my iPhone 4S which is capable of text message forwarding would not recognise it and allow me to turn it on. Handoff, Continuity and Instant Hotspot - basically any of the features to do with iCloud or connecting to another device - do not work.
    Originally I believed it was just an issue with Messages and Facetime so I reinstalled the OS back to 10.10.1, but that did not solve the problem. All my Messages contacts kept on coming back as 'not registered with iMessage' and I could not turn on SMS Relay either.
    I contacted Apple on Wednesday night and ended up talking to several different people, the Senior Advisor was the most helpful - really tried to help me figure out what was wrong, and to fix it - wonderful help, really was. They used screen sharing and were quite confused. They figured out as well that Handoff, Instant Hotspot, and all those other features don't work either. At this point, they made me update to 10.10.2 to see if it was an issue with the update, but to no avail.
    Eventually, the SA checked my iCloud account and saw that the computer hadn't even connected to iCloud, and wasn't even showing up as one of my devices, despite the fact that I had signed into iCloud on this computer.
    The SA told me that he suspected it must have been something to do with hardware, but didn't know what it could be. He said the only time he had seen this before was on a refurbished laptop when the serial number hadn't been put back on, but my serial number was there, so he said it must have been something to do with Bluetooth or Wifi.
    Wireless seems to work completely fine, but there is a strange thing with Bluetooth in which within System report says that the computer is not discoverable or connectable, despite the fact that in the Menu Bar it says it is on and discoverable. It becomes discoverable and connectable once you toggle the switch in System Preferences.
    I was planning to book a Genius Bar Appointment as suggested by the SA, but something strange happened today - all of a sudden, some (not all of them) of my iMessages from earlier today came through. Still no working Handoff or Facetime or Continuity, but now I am starting to wonder what is really wrong.
    Despite the fact they said it was hardware (especially Bluetooth), what could explain why it (seldom) or will not register with iCloud? Can anybody shed some light on the situation and whether a Genius Bar appointment could help fix it?
    Cheers and thanks in advance.

    Needed to add some clarification here:
    iCloud shows me as signed in, but Calendars are NOT checked
    Internet Accounts shows Calendars as syncing

  • Flash cs 5 "go to and play" not working

    In the Scene palette, I've got 7 scenes  each of which is a variation of a gently animating and looping node structure.
    Each scene contains nodes which we can press to play another scene.
    I've placed a large invisible button over the nodes with a code snippet "go to and play X" ie the 1st frame of another scene.
    the node structures contain several nested symbols and I found placing a button within a nested symbol would not work.
    I found placing a large invisible button over the top at the root level of the scene would sometimes work and I could advance to another scene.
    this no longer works however and I'm sure I didnt change anything. I've tried to recreate it with no success.
    I've tried making my symbols mc's and also graphics.
    sometimes i get error message "scene could not be found" other times there is no message, just nothing happens
    anybody got a light to shine on this one?
    ta

    Personally I would recommend getting away from scenes.  If making what you have as scenes into separate movieclips will make it easier for you to manage the content, then go for it.  You can either spread them out on the timeline or keep them all in one frame and control their visibility.  Controlling the visibility works well if you need to retain the state of things in one section when you change to a different section.
    You can't attach files to the forums any more... a year or two ago you could, but like a variety of features it was disabled.

  • A2105, google play not work

    Recently I purchased A2105 from china, I have try install google play in several version. No abnormality during installing until finish, but when execute google play app it was not work... after execute the google play its look like work just for a second than the program closed by it self.... Please help.... thanks

    Hi edgames74,
    You might want to consider trying the link below. It might just help though. Worth the try.
    http://forums.lenovo.com/t5/ThinkPad-slate-tablets​-Knowledge/Fixing-Google-Play-Cache-Problem/ta-p/7​...
    hope this helps.
    Regards

  • After Effects Import Vector Continuously Rasterize not working

    Hello.
    I'm trying to import a vector into After Effects and it's not working the way I need. Yes I have Continuously Rasterize turned on. No the original Illustrator file does not have any effects on it. I've tried png, eps, psd, and ai files. Same issue.
    1. This is what the original AI vector file looks like:
    2. This is what it looks like in AE with Continuously Rasterize turned on, zoomed in at 400%. It's crappy.
    3. And this is what it looks like in AE zoomed in at 100%, but I've scaled the image up to about 200%.
    But I can't use the huge scale vector for my project because it is too big for my comp. Can somebody help? My brain hurts.
    I do realize that it looks crappy within the AE viewer, but even after I export it in HD, it still looks crappy.
    Basically, I just want a nice clean final picture to look good in my comp.
    Hey thanks for anybody who can help. Huge karma waves coming your way.

    When posting questions like this just a screenshot of the result is almost useless in diagnosing the problem. A better screenshot would include the Comp Window and timeline with the layer in question selected and all the changed properties revealed by pressing the U key twice. Also, since this was an imported file that is in question, if the footage item is selected in the Project panel then we can get an idea of the format, size, and other properties of the original file that may be causing problems.
    You should not have to buy anything to get properly created vector files ti work perfectly in your composition. When you said zoomed in at 400%, if you meant scale factor and not scale of the layer then the behavior is normal, expected, and exactly what should be happening. Zoom Factor set to 400% means the comp window is using 16 screen pixels for every comp pixel. Zoom Factor set to 1600% means a single image pixel is displayed as a 16 X 16 block of screen pixels - so things are going to look pixelated when they are not. The only way to judge quality is to look at the composition window with the Zoom factor set to 100%. This is exactly the way Photoshop works.
    Here's what I mean. A single Illustrator layer selected, scaled to 5174% and perfectly rasterized in a comp with the Zoom Factor at 100% scale. Note the layer size in the project panel. Everything we need to know to diagnose a problem.

  • Motion menu first play not working

    No matter what I do the first play motion menu either stops at the end or goes on to play a timeline on two different hardware players and in VLC (last two versions). The only player where it properly loops is PowerDVD 9 (which has its own problems with linked timelines). This is not a hardware problem. This is an Encore problem probably being caused by an inefficient layout of files on the disk.  There is a possibility (slight) that this is being caused by removing assets and "saving as" to create two DVD5's from a DVD9. Despite the deletion of assets the "saved as" project files are about the same size as the DVD9 project. I wish Encore ws like Pr in that it could rationalize a project by importing it into a new project. Then again with all the problems people report with motion menus it may not have anything to do with the work flow.
    Don't see any easy work around here except building the two projects up from scratch unless someone has a idea of what to try.
    I wish this software would work better. It really is the worst of the Production Suite (and I use Pr as my everyday editor)

    Sometimes the end action will get locked into an asset if you build the project. Changing the end action of the menu after you have gone through the build process may not work. You might have to delete the menu from the project, re-import it, relink the assets and buttons, and it should work.
    You are correct, Encore is not as polished of a program as Photoshop, but at least there are usually workarounds so you can successfully build a disc that works as it should.

  • Continuous scrolling not working in Calendar month view

    Scrolling does not work in Calendar month view. I have toggled System Preferences >General > Show scroll bars to "Always on." Still nothing in Calendar month view.
    BUT, wait! Now every other app (except Calendar month view) now has the scroll bar "Always on" even though I toggled back to "Automatically based on...", then restarted my computer. I don't want to see the scroll bars all the time but now I can't hide them anywhere. It seems "Always on" amd "Automatically based on..." now do the same thing. Serious bug.
    Any hints? Thanks

    This is odd,  but the calendar scrolling in Month view is working on my machine.   It's been through various reboots - and I checked the disc (SSD) and permissions.
    Seems to me that the calendar application is sensitive to the scrolling. 
    Also,  I've been suffering from Firefox vertical scrolling stopping.  The "fix" is to quit & restart Firefox.  However... this scroll-crashing behaviour goes away for a few days then comes back with a vengence.  Again,  I've a feeling that a full reboot seems to help things.
    Yet another mouse-related problem I've been having is with VMWare.  These frequently interpret a single-click as a double-cliick or even triple-click.  Some chatter in the VMWare forums about this too.
    All of this behaviour *never* ocurred prior to the Mavericks upgrade.

  • Lync 2013 Mobility continues to not work

    Having issues getting mobility to work.
    Simple environment:
    Single server Edge pool
    Single server EE pool
    SQL clustered backend
    All Lync 2013 CU1 at this point in time.
    Potentially required reading:
    Deploying Mobility (Technet)
    Lync Mobility Deep dive
    (based on 2010, but nearly the same in 2013)
    http://masteringlync.com/2011/08/13/using-fiddler-to-troubleshoot-address-book-download-issues/
    http://blogs.technet.com/b/nexthop/archive/2012/11/09/understanding-lync-server-autodiscover-to-support-the-lync-windows-store-app.aspx
    Windows RT app uses the same method as IOS, and is more wiresharkable/tracable, so I am using that.
    Client end errors:
    Windows RT app (15.0.4481.1503) -  this client version cannot log in.
    iOS - Can't sign in.  Please check your account information and try again.
    I don't have a windows phone or android, so working with the clients I have.  (I understand these also do not work)
    Fiddler trace of Windows RT app session:
     From the W3svc logs:
    2013-03-20 03:53:17 1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user [email protected] 4443 - 75.122.79.199
    LyncImm/15.0.4481.1503+(Microsoft+Lync) 401 0 0 35
    LyncImm is
    NOT a user agent listed in the CSCP - google "user agent" +lyncIMM turned up nothing.  Dead lead?
    Lync connectivity analyzer shows it repeats the same webticket 401 over and over with:
    Cookie  found in autodiscover response: StatusCode: 401, ReasonPhrase: 'Unauthorized', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
      X-Ms-diagnostics: 28032;source="LyncFE.company.local";reason="The web ticket is invalid.";faultcode="wsse:InvalidSecurityToken"
      X-MS-WebTicketURL:
    https://lyncweb.company.com/WebTicket/WebTicketService.svc
      X-MS-WebTicketSupported: cwt,saml
      X-MS-Server-Fqdn: LyncFE.company.local
      X-Content-Type-Options: nosniff
      Cache-Control: no-cache
      Date: Wed, 20 Mar 2013 04:12:20 GMT
      Server: Microsoft-IIS/7.5
      X-Powered-By: ASP.NET
      Content-Length: 1293
      Content-Type: text/html
    LCA:  from inside, choosing Windows App - success!
    LCA: from inside, choosing Lync Mobile Apps- fail:
    Failed to obtain the WS-Metadata Exchange (MEX) document using GET for
    https://lyncweb.company.com/Mcx/McxService.svc/mex.
    The service did not require authorization.
    LCA, from outside, choosing Windows App - hangs repeatedly on the HTTPS external channel.  (repeating 401's on webticket service)
    LCA, from outside, choosing Choosing Lync Mobile apps  - failed, same as from inside #2
    Here's what the LCA failure looked like:
    2013-03-20 04:59:12
    1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
    0 134
    2013-03-20 04:59:12
    1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
    0 0 155
    2013-03-20 04:59:12
    1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user
    [email protected] 4443 - 75.122.79.199 -
    401 0 0 35
    2013-03-20 04:59:13
    1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
    0 126
    2013-03-20 04:59:13
    1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
    0 0 158
    2013-03-20 04:59:13
    1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user
    [email protected] 4443 - 75.122.79.199 -
    401 0 0 31
    2013-03-20 04:59:13
    1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
    0 126
    2013-03-20 04:59:13
    1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
    0 0 148
    2013-03-20 04:59:13
    1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user
    [email protected] 4443 - 75.122.79.199 -
    401 0 0 33
    2013-03-20 04:59:13
    1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
    0 121
    2013-03-20 04:59:13
    1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
    0 0 155
    2013-03-20 04:59:13
    1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user
    [email protected] 4443 - 75.122.79.199 -
    401 0 0 31
    2013-03-20 04:59:15
    1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
    0 125
    2013-03-20 04:59:15
    1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
    0 0 147
    2013-03-20 04:59:15
    1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user
    [email protected] 4443 - 75.122.79.199 -
    401 0 0 32
    2013-03-20 04:59:15
    1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
    0 120
    2013-03-20 04:59:15
    1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
    0 0 151
    Similar thread:
    http://social.technet.microsoft.com/Forums/en-US/ocsmobility/thread/96c3fc3a-2f80-435a-8368-1a83dcd56e55/
    http://msdn.microsoft.com/en-us/library/ff595929%28v=office.12%29.aspx
    IOS attempt at sign on (version 4.3.8000.0000)
    IIS log files:
    2013-03-20 04:26:08
    1.2.3.4 GET / sipuri=sip:[email protected] 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 200 0 0 1382013-03-20 04:26:08
    1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 0 0 802013-03-20 04:26:08
    1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074254 1292013-03-20 04:26:08
    1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074252 882013-03-20 04:26:08
    1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074254 782013-03-20 04:26:08
    1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074252 882013-03-20 04:26:09
    1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074254 782013-03-20 04:26:09
    1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074252 84
    IOS log file was too large to post in message.
    Running test-cmdlets:
    $passwd1 = ConvertTo-SecureString "supersecure" -AsPlainText -Force $passwd2 = ConvertTo-SecureString "notontheinternet" -AsPlainText -Force $tuc1 = New-Object Management.Automation.PSCredential("domain\user1",
    $passwd1) $tuc2 = New-Object Management.Automation.PSCredential("domain\user2", $passwd2) Test-CsMcxP2PIM -TargetFqdn lyncfe.company.local -Authentication Negotiate -SenderSipAddress sip:[email protected] -SenderCredential $tuc1 -ReceiverSipAddress
    sip:[email protected] -ReceiverCredential $tuc2 -v
    From <http://technet.microsoft.com/en-us/library/hh690024.aspx>
    Results:
    Target Fqdn   : lyncfe.company.com
    Target Uri    :
    https://lyncfe.company.com:443/mcx
    Result        : Failure
    Latency       : 00:00:00
    Error Message : No response received for Web-Ticket service.
                    Inner Exception:The HTTP request is unauthorized with client
                    authentication scheme 'Ntlm'. The authentication header
                    received from the server was 'Negotiate,NTLM'.
                    Inner Exception:The remote server returned an error: (401)
                    Unauthorized.
    Diagnosis     :
                    Inner Diagnosis:X-MS-Server-Fqdn : lyncfe.company.com
                    Cache-Control : private
                    Content-Type : text/html; charset=utf-8
                    Server : Microsoft-IIS/7.5
                    WWW-Authenticate : Negotiate,NTLM
                    X-Powered-By : ASP.NET
                    X-Content-Type-Options : nosniff
                    Date : Wed, 20 Mar 2013 04:39:44 GMT
                    Content-Length : 6639
    Verbose comments on it:
    Trying to get web ticket.
    Web Service Url :
    https://lyncfe.company.com:443/WebTicket/WebTicketService.svc
    Using NTLM\Kerberos authentication.
    Could not get a web ticket
    CHECK:
     - Web service Url is valid and the web services are functional
     - If using Phone Number\PIN to authenticate, make sure they match the user uri
     - If using NTLM\Kerberos authentication, make sure you provided valid
    credentials
    URLs and ports all look OK, all services started.
    Not using phone/PIN
    I provided valid creds - the virtual directories show anon/NTLM for the Webticket vdir.
    Any help is welcome - really want this issue put to bed!

    I know this is an old thread, but I was struggling with the same error for mobility, and I hope this may help others in the same situation. 
    On my scenario the issue was caused because the customer didn't use any reverse-proxy solution, instead the FE external website was directly published using a FortiGate box.
    Given that scenario, there were 2 different certs installed on the FE server, 1 (internal RootCA) certificate was applied to the internal website, and another one issued by Godaddy was assigned to the external website manually from IIS console.
    ---I know this is far from a supported solution, but I was able to get it working after some investigation---
    To solve the issue I use this article:
    http://technet.microsoft.com/en-us/library/jj205253.aspx it explains how to check and assign the certificates for oAuth and I used these cmdlets to specify the Godaddy cert to the "WebServiceExternal" & "OAuthTokenIssuer" websites.
    After that the mobility access for internal and external users started to work as expected, I've validated it with "Lync Connectivity Analyzer" and with different mobile clients on Android, IOS and Windows Store.
    Hope this information may be useful.
    Performance, Security & Design

  • Ai CS6 continues to not work- additional problem with plug-ins.

    These messages came up while trying to open these two files. They open after clicking OK, but the applicaion bar is completley blank and with no tools showing.

    Watch Illustrator as it boots to see of if initialzing plug ins is showing, or if it acts as if shift is being held down and boots really quick (most your keys commands would not work then).
    Applications >> utilities >> disk Utility >> repair Permissions.
    Reset your prefs: immediately after booting Ilustrator, hold down 3 keys: shift, command, opt
    Go to applications >> Illustrator 6 >> Plug ins >> Illustrator Filters  (is offset path there?) if not you may have something wrong with your install and many of your plug ins may be missing. The plug ins mentioned are mostly in 3 of the folders.
    Check that your plug ins don't say somehting liek size is 0k. Here is the info for my plug in.

  • HT204291 Enlarging photos with air play not working

    I am trying to enlarge my photo by pinching and it does not work.
    I have mirroring turned on
    What can I do?

    Hello there, kgreasko.
    The following Knowledge Base article offers up some great steps for troubleshooting Airplay Mirroring:
    About AirPlay Mirroring in OS X
    http://support.apple.com/kb/HT5404
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • ITunes Air Play Not Working

    Windows 7 - iTunes 12
    iTunes has no issues and plays all content well
    I am trying to stream content to an Apple TV (latest generation I think, I just got it from Staples)
    I've removed iTunes, including all libraries, registry entries, and all related folders or programs.  I've disabled iPV6 on my PC, I've configured the router to work with iPV6, rebooted EVERYTHING, and even hard rest my router.  I've created a new user and installed iTunes.  Home Sharing is active on EVERY device I have using the EXACT SAME Apple ID.  I've even tested iTunes on my network on multiple machines, all to no avail.  The TV has the latest software.  I've restarted it, I've reset it.  I can stream and mirror using Air Play to my HD TV using my iPhone or iPad Air.  iTunes Air Play seems to be the one thing I can't do..  I'm at a loss and now I'm ready to throw this thing against the wall.
    After I activated my TV I noticed what I now know to be the Air Play icon in iTunes, but I'm a little afraid I may have clicked something which now makes it stay hidden, but after the removal of iTunes and re-installing it, I doubt it.  Please tell me what I need to do to make it work.

    I unplugged the ATV2 and disconnected it from the HDMI. I once again turned the homesharing off and on in my iutnes ( but see no icon on the side bar) Then I reconnected and the menu of ATV it showed my library on the TV screen. I clicked on it. It said is was loading for a while then it said "Could not connect to Sharon's library". My itunes is open and it said make sure you are on the same network. Frustrated and lost. Ideas?

Maybe you are looking for

  • How do you stop music while video plays???

    Ok...so here's the deal. I'm making a movie that is a combination of pictures and videos. It's basically like a slideshow type thing, but now I'm adding video to it. I've already put all the pictures and transitions and music that goes along with tha

  • Character set migration error to UTF8 urgent

    Hi when we migrated from ar8iso889p6 to utf8 characterset we are facing one error when i try to compile one package through forms i am getting error program unit pu not found. When i running the source code of that procedure direct from database usin

  • Linux 9.0.1 and Workflow

    Hi. I just installed Linux and 9.0.1 database. Workflow does not seem to be a part of the installation. What do I need to do to get it installed? (downloads ? install files to run?) Thanks in advance Kjetil

  • Export error: Writer not found

    Hello, I am using PPCS3 with Aspect HD. I am using the Cineform HD 30p preset. I keep getting an export error: writer not found when I try to export a short movie using two uncompressed .avi's I obtained from 3DS Max 2009. Any ideas what "Writer not

  • Problem with Light Table in Bridge CS6

    Hi! After a re-install (which didn't fix the problem with PS), I now find that, when using the light table in Bridge CS6 and after hitting the space bar, if I then click on the image, it goes to 800% size! Prior to the uninstall & re-install, it work