Continuous tracks playing

hi, I've got a Muvo TX?with firmware ver. .4.02 and I found this problem:when I'm listening continuous tracks (for example li've tracks) the player put between the tracks a very short space, so the playing it's not continuous!!obviously I'm talking about tracks that if I listen with Winamp they haven't any blank space at the beginor at the end.did you know if there is something to do about this problem?all the Creative mp3 players have this problem? others models (like Zen for example)?havethis problem too?what mp3 player without this problem, I have to buy ?thanks very much.--enrico?

Even on my PC with it's vast resources and processing power I get slight gaps when playing the mp3 files from, say, a li've album?ripped from?a CD. On a small mp3 player with much more limited abilities it would be nice to be able to get gapless playback but not likely.
There will always be that small amount of time between one track finishing and the next being fed into an input buffer and played. On a li've album especially this is noticeable as a slight gap in the crowd's clapping.
And, yes, I appreciate it can be done with the right hardware and firmware but don't expect the players we have now to be upgraded to achieve it. It just won't happen.
PB

Similar Messages

  • TS1389 I've purchased an album through the itunes store and every track plays except one which continually asks me to authorise my computer.  I've tried all the steps suggested above but still no joy.  Anyone have any ideas what i can do next?  Thanks  Pa

    I've purchased an album through the itunes store and every track plays except one which continually asks me to authorise my computer.  I've tried all the steps suggested above but still no joy.  Anyone have any ideas what i can do next?  Thanks  Paul

    Sounds like you have a "damaged track" or "damaged file".
    This worked for me today downloading Kendrick Lamar's new Album "good kid, m.A.A.d city".
    My situation: I bought the album today for my Mac,  MacBook Pro, iPad 2, and iPhone 4S devices.
    Issue: One song (only on my MacBook Pro) would not play, instead display "
    EX: left"
    Solution: 1. Manually delete the song (giving you the error) permantly from the authorized computer.
    2. Open iTunes, Click iTunes Store (left sidebar), and locate Quick Links and then click Purchased to proceed.
    3. Click "Not On This Computer", find the song that wouldn't play, and re-download it again.
    4. Check your Music Library for your song (Should download inside the associated album) and hit play.
    EX: (Song I purchased that wouldn't play because of authorization, playing)
    Enjoy!

  • Showing Photos While Video Clips Continue to Play

    I am trying to fade in photos while a video clip and its sound continue playing. (Although the video clip continues to play, it's obscured by the photo.)
    Currently when I place a photo into the storyboard the video clips stop playing, the photo shows, and then the video starts again.
    Does anyone know how photos can appear in my movie without interrupting the playing of the video and its audio?
    Thanks!

    Hi bcas and welcome!
    You want to superimpose a still photo on a moving video? No problem!
    But you need to buy Quicktime Pro. Here is how to do it (don't worry about the references to video within video, it works the same for stills - you will soon get the hang of it!
    Organise the video clips and/or stills that you want to superimpose on to your main video clip, by having these in separate, individual iMovie projects (no matter how small). It helps if these are in the exact length/time you want later.
    Now start with the clip in your iMovie project on to which you want to superimpose one of more smaller video clips or stills. Lets call it Main Clip. Export this (share) to Quicktime Pro in DV (full quality). make sure it has the same aspect as before (Quicktime tends to default to 4:3. If you want 16:9, read on).
    In Quicktime, with this project open, select File ~ Open File. Select the iMovie file (in your movies folder) of the first clip/still you want superimposed. This will open in its own QT window. Select Edit ~ copy. If it is a movie clip then select all ~ copy (or you will only get one frame!). Switch back to the Main Clip window, and click in the scroll bar where you want the extra clip/still to appear. Choose Edit ~ Add to Movie.
    You can repeat this as many times as you like, if you want to build a 'Video Wall', i.e. have several superimposed clips/stills on the same Main Clip.
    Do not worry that the new clip overlaps or covers up the Main Clip, at this stage.
    Choose Window ~ Show Movie Properties. The Properties Dialogue appears.
    You will see a list of video (and audio) tracks. Track one will be the Main Clip, track 2 your new added (superimposed) clip. Click track 2, then click visual settings. From the Scaled Size pop-op menu, choose percent. Then type 50 into the first box. If Preserve Aspect Ratio is turned on you won't need to type 50 into the second box. You have made the pasted footage appear at one quarter its original size. The inset is now hugging the top-left corner of the Main Clip. If you want, you can type numbers into the Offset Boxes to shove it away from that corner (there are 72 pixels to the inch).
    If your original Main Clip was required in 16:9, unclick (de-select) Preserve Aspect Ratio, and type in 1920 in the first box, and 1080 in the second, in Video Track 1. This will not affect video track 2, but if that is also wanred in 16:9 repeat for that track.
    You can superimpose, 3, 4, or more such 'overlaps' on the same clip, and spend a happy afternoon tapping away for each track in the Offset Boxes until you have got them all in the right place! You can even overlap them, if you can remember (or note down - hire a secretary to take notes) which track you want on top etc.
    Save the completed QT file. Import the completed file into a new iMovie project. Import this into the original iMovie project, substituting the old clip you copied to QT as Main Clip for the new fancy clip you have made.
    Have fun!

  • Bounced tracks play too fast in iTunes

    This is a continuation of an old thread that was never resolved:
    http://discussions.apple.com/thread.jspa?threadID=853393
    Basically, nothing has changed. I can bounce my tracks from Logic, and they play fine everywhere except iTunes, where they play too fast. I can play them on my iPod in the car and everything works at normal speed.
    All my iTunes tracks (including the ones bounced from Logic) share the following characteristics:
    192 kbps
    44.1 kHz
    Profile: Low Complexity
    However, the Logic tracks play fast, whereas everything else plays normally.
    I have a standard G5 sound card, not a 3rd party one.
    I'm about to conclude that this is a standard limitation with Logic, that tracks created there cannot be listened to at regular speed in iTunes. Is that a known issue? Is this limitation by design?

    Sorry for the slow reply. Yes, that is the problem I'm having, and it's so weird, I thought maybe there was some wacky glitch in the program. Logic is not without its bizarre idiosyncrasies, as you've probably noticed yourself.
    Check this out for bizarre: I've bounced these tunes down to my iPod, where I can listen to them over headphones, in my car, etc, with the tracks playing at the right speed. However, if I plug that same ipod into my home stereo in the living room (where the laptop is also plugged in), and play those same tracks, they play too fast. I know, it doesn't make sense. But I'm not imagining it. It's completely crazy.
    In Audio Midi Setup my audio output is set for 44.1khz.
    Anyhow, the problem is less consistent these days. That is, sometimes I can bounce a track down and it plays right. Othertimes, not. I still haven't found the common denominator to this problem, but if I discover anything, I'll post it here.

  • Video audio continues to play in the background

    I have created a close button that should stop the video from playing, thus closing out of the video and returning to the main menu. But the video audio continues to play in the background.
    Does anyone know how I can get the video to pause/stop playing at the same time as it returns to the main menu and after clicking on the close button?
    This is what I have to play the video:
    var videoStage = sym.$("videoPlayStage");
    videoStage.html('<video id="myvideo" width= "640" height= "360" src = "composition2/myvideo.mp4" poster="images/poster" type= "video/mp4" controls = "controls"></video>');
    sym.$("videoPlayStage").show();
    close button
    I have a trigger:
    "off"
    sym.$("#D39").pause();
    It is not working.

    Here is the code that I put on my close button to make the video pause when closed ("Nat_League_Back" is the place on the timeline that I want to direct the user to when the video is closed):
    sym.play("Nat_League_Back");
    // Pause a video track
    sym.$("BaseballVideo")[0].pause();

  • IMovie videos freezing, music continues to play?

    I'm creating a montage of some videos on iMovie with a song as the backing track, however I've hit a brick wall of sorts because I can no longer add videos without the clip I add freezing.  The music continues to play, but the video I add just freezes.  It doesn't matter what video clip I add (I've tried a few in case it was the clip that was causing the problem) but it happens to all of them.  The rest of the video plays fine.  I've made plenty of videos like this before and I've never faced this problem so I have no idea what it could be!  Any help would be much appreciated, thanks.

    That's normal and as designed. The song will play out. You can pause it by pressing one of the volume buttons or use an app like 'Stop the Music' to completely exit the player.
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Problem turning off video`s...sound continues to play

    Hi, I am experiencing a problem when turning off a video and switching to listening to music - the sound continues to play over the music track or audiobook - is anyone else experiencing this problem? The only way I can get round it is by pressing the next/fast forward button....but then of course when I want to watch the remainder of the video it restarts from the beginning, not from where I left off! Any help would be appreciated.

    http://docs.info.apple.com/article.html?artnum=302697

  • Ipod screen freezes for 30 seconds but continues to play music

    I mostly use my ipod while I run.  This means that concurrently I have music playing and the stopwatch feature working.  They both work well together, but at least 2-3 times during a run, my screen will freeze if I attempt to skip a song or record a completed lap for the stopwatch.
    When the screen freezes thanks to my pressing either the left/right or center buttons, the music continues to play but it takes approximately 30-45 seconds for the ipod to respond to what I did.  Fortunately, the stopwatch doesn't stop counting the seconds, so I don't lose the time I am tracking.  It's really frustrating to not be able to change a song when I want or record a lap.
    I have restarted the ipod a few times but have never completely restored it.
    Has anyone had this problem and can offer a solution?  I get so frustrated by this during my runs!
    Thank you.

    I mostly use my ipod while I run.  This means that concurrently I have music playing and the stopwatch feature working.  They both work well together, but at least 2-3 times during a run, my screen will freeze if I attempt to skip a song or record a completed lap for the stopwatch.
    When the screen freezes thanks to my pressing either the left/right or center buttons, the music continues to play but it takes approximately 30-45 seconds for the ipod to respond to what I did.  Fortunately, the stopwatch doesn't stop counting the seconds, so I don't lose the time I am tracking.  It's really frustrating to not be able to change a song when I want or record a lap.
    I have restarted the ipod a few times but have never completely restored it.
    Has anyone had this problem and can offer a solution?  I get so frustrated by this during my runs!
    Thank you.

  • Why does itunes and other media continue to play when i close the lid on my macbook pro 2011???

    Hey, I am new to mac and still getting used to it (making the transition from windows), its amazing! Anyhow, I cannot figure out why my itunes and other media like youtube or a film on vlc player continues to play once the lid has been closed. I thought that when i close the lid the macbook should then sleep. It does everytime when there is nothing playing. The little white light on the bottom right hand corner of the book is on but music continues to play.
    The sleep option always works. If I press the power button and choose the option sleep it does so etcc.
    Is this normal and am I just being stupid or is there a problem??
    I bought the laptop from ebay, its a macbook pro late 2011 17inch. I dont have apple support and might have to make a trip into London to the mac store however I was hoping someone can help me...    
    Processor  2.4 GHz Intel Core i7
    Memory  4 GB 1333 MHz DDR3
    Graphics  Intel HD Graphics 3000 384 MB
    Software  Mac OS X Lion 10.7.5 (11G63)
    Thanks if you can it is muc appreciated....!!

    hey, thanks for the reply. I don't know to be perfectly honest. When I close the lid without any music playing it sleeps fine. How could I check?
    So basically I pressed the power button and pressed sleep. The laptop turned off and the little white light turned on no problem. I did the same thing with closing the lid and it went to sleep no problem. (Can you confirm that when the little white light is on it means the laptop is sleeping)??.
    I then had itunes playing and pressed the power button and when i pressed sleep the music paused then 6 seconds later it went to sleep. I then had itunes playing and closed the lid and the music kept on playing even though the white light was on.
    What do you think  jessejarvi?

  • Multiclips and multiple audio tracks playing at the same time

    I've only just taken delivery of my first ever mac (only ever used PC) with FCP, and I'm loving it already! Done lots of reading and viewing of video etc etc, and it's not as daunting as I thought it might be. I have one question the books don't seem to answer, and I can only find one reference to this on this site, with no definitive response. FCP5 probably doesn't work this way, but just in case someone knows different......
    I film and edit motorsport (karting) programmes for television in the UK, using multiple cameras. I usually lay all the video and audio tracks on the timeline, (synched) lock the audio for each (as it is engine noise, and I want it playing without abrupt changes at cuts as each kart passes each camera, whether in shot or not) then cut the video tracks and delete those video segments not required.
    The most exciting aspect of FCP5 for me is the multiclip editing facility, which I have found very easy to learn and is going to save me hours of work! However, I want to know if there is a way of having each audio track from each camera used in the multiclip laid down on the timeline when you import the multiclip to the timeline from the viewer, in order that I can play each audio track from each of the cameras at the same time.
    I know how to cut from angle to angle, leaving the audio from the selected angle as the one audio track playing, but I want all of the tracks to appear in the timeline and play at the same time. I know there's a bit of a workaround by locking the video and importing each audio track from each clip independently, but if you do have to re-synch one of the multiclips, this means the audio is not then synched with the original clip, which will have had an in point set before being imported in as part of a multiclip.
    I can understand why you might want to keep audio from one camera only playing over the whole multiclip, or to switch between audio from each, but in my case I prefer all audio to play at the same time. The workaround is still do-able for me as I'm only talking about engine notes, which if they are a few frames out is not very noticeable at all, but I would like to know if I'm right in thinking I cannot do it the way I would like to?
    Wish I'd used FCP from the start, but glad I've got it now.....especially with the 30 inch screen! It's 4.40am, been going over 19 hours straight and I'm still making comments like...."WOW, that's brilliant"...every half hour!
    G5   Mac OS X (10.4.3)   Quad, 8gb ram, 2 x G-Media GRaid 500gb Raids, 30 + 20 inch Cinema screens

    ...

  • When plugging in my headset, the sound continues to play on the ipad and not on the heeadset. Why?

    When plugging in my headset in my iPad, the sound continues to play on the ipad and does not switch to the heeadset. Why? I did not have this problem before.

    If you have used earphones in the past then I assume that you realize it takes a very firm push to insert the headphones into the opening - correct?

  • ITunes 12 crashes all the time (but music continues to play)

    Since I bought my new Macbook Pro I've had this annoying problem with iTunes. It's crashing more or less every ten minutes. It doesn't affect the track playing though. The track finishes playing, and when it's done nothing happens. Except for iTunes saying "Does not respond". Then my only choice is to force quit the app, and start it from the beginning.
    Sometimes a reboot helps. If I'm lucky I'll get one hour without crashes. But suddenly it happens again. I've tried downgrading iTunes, but it wouldn't let me. No matter which guide I followed there was some kind of problem. So I tried reinstalling it. Deleted everything, even my playlists. And I thought I solved the issue but it all started again. Crash upon crash.
    I'm thinking that I can't possibly be the only one who has experienced this. Again, it's a brand new Macbook and it started almost from day one.
    I hope someone can help me or give me some advise.
    This is a little bit of the description I get when the crash happens:
    "Date/Time:  
    2015-03-24 01:09:07 +0100
    OS Version: 
    10.10.2 (Build 14C109)
    Architecture:
    x86_64h
    Report Version:  21
    Command:    
    iTunes
    Path:       
    /Applications/iTunes.app/Contents/MacOS/iTunes
    Version:    
    12.1 (12.1.0.50)
    Build Version:   1
    Project Name:
    iTunes
    Source Version:  1200012001000050
    Parent:     
    launchd [1]
    PID:        
    24849
    Event:      
    hang
    Duration:   
    1.60s (process was unresponsive for 38 seconds before sampling)
    Steps:      
    17 (100ms sampling interval)
    Hardware model:  MacBookPro11,1
    Active cpus:
    4
    Fan speed:  
    1701 rpm"

    I have the same issue, though mine crashes/freezes within a minute of opening iTunes.
    However, when I open iTunes in Safe Mode (hold down Option + Command), it works absolutely fine. The only difference as I understand is that it disable iTunes plugins. But I never even installed any plugins (verified that /Users/username/Library/iTunes/iTunes Plug-ins/ folder is empty), so I have no idea what may be causing this.
    Any ideas?!

  • How can I have html5 audio continue to play in background in iOS7 from my flex mobile app

    I have mobile app I've developed in flash builder 4.6 (flex 4.12 sdk) and I have a stagewebview component which contains HTML5 audio (mp3 retrieved from my web server and streamed / played via the app)... I want to have the ios version of the app CONTINUE to play the mp3 / html5 audio when the user presses the home button on their iphone or opens another app... so that when multitasking, my audio continues to play (where theres no other NEW audio started, for instance).
    I have added the following to my manifest but it still doesnt do what Im after. I used this in another mobile app where I just play audio from the url directly in flash builder (i.e. NOT via webview component) -- but here it seems the webview suspends (Im guessing)...
    <iPhone>
        <InfoAdditions><![CDATA[
            <key>UIDeviceFamily</key>
            <array>
                <string>1</string>
            </array>
            <key>UIBackgroundModes</key>
            <array>
                <string>audio</string>
            </array>
        ]]></InfoAdditions>
        <requestedDisplayResolution>high</requestedDisplayResolution>
    </iPhone>
    Is there a way around this so my audio continues to play? My test device is an iphone 4 running the latest version of ios7

    You can import audio files into Logic (as easy as drag and drop).  You can download these loops from the Internet from a variety of sources both free and paid.  Just do a Google search for those.
    Once you've imported the file into Logic Pro, right click on the audio region and scroll down to the "Convert" option about halfway down the menu.  The top option will be "Add to Apple Loops library" - click this, and it'll add the file into your Apple loops.
    It won't affect the other loops in the library.

  • Hi, my macbook screen goes black at random points when I am using it. I know it is still running as music continues to play and I can vaguely make out the content of what is on the screen. Sometimes the screen will flicker between black and normal. Can I

    Hi,
    my macbook screen goes black at random points when I am using it. I know it is still running as music continues to play and I can vaguely make out the content of what is on the screen. Sometimes the screen will flicker between black and normal. Can I fix this?

    Emily..
    Could be the graphics card, run the Apple Hardware Test
    If the hardware test doesn't reveal any problems, use Lion Recovery.

  • When I leave a feed from watching a video on Facebook the sound continues to play. Even if I leave Facebook and come later the sound returns

    VVideo sound continues to play on Facebook when I leave that feed.. Even if i leave Facebook and return

    Having this problem too.
    I Have to close the Facebook app to stop it.
    ANy ideas anyone?

Maybe you are looking for

  • Warning message in ITS MOBILE

    Hello, In ITS Mobile after entering user name and password it takes me to LM00 transaction. But before LM00 transaction is displayed I get 4 warning messages. I need to press OK/Close for each message. The same warning message appears when I move bet

  • Multiple cursors opened when following BC4J Entity Association in a loop

    I am using BC4J in JDeveloper 9.0.4.1.1 Build 1436 against a 9.0.2 database. (Note the BC4J project was originally created in a 9.0.3 JDeveloper release) In the BC4J project, I have a "Contract" Entity that has a 1-to-1 Association with an "Estimate"

  • IBook Graphics Card

    I'm looking to buy a new graphics card for my iBook, considering the one I have is only like 36mbs. Is every graphics card the same? Or are there different graphics cards needed for different computers? I guess what I'm asking is what graphics cards

  • The requested object is locked by another transaction

    Hi All, I got a problem while loading data from an ODS to another ODS, it shows 450 records but request is red, it says 'The requested object is locked by another transaction' Message no. MC602 Diagnosis A lock requested by calling an ENQUEUE functio

  • Permissions not being propagated to files

    Hi. Wondering if anyone can help me. Iv recently updated to Mavericks & Server 3.0.2. Iv setup permissions on a shared folder using the server app. Works fine apart from files aren't getting the correct permissions. Instead they get a permission call