Contract Number Display in Limit PO screen

Hello All,
I have some queries on Limit Items:
1) I reference a Contract while creating a Limit Order. But the value of the Limit PO is not added to the released value in the Contract (call off). The call offs happen perfectly well when we create a normal Purchase order.
2) In purchase orders referencing a contract, at the item level of the PO, the contract number is displayed. But in case of limit POs, the contract referenced is not displayed.
Is there a way to display the contract number in Limit PO?
Any inputs and guidance will be highly appreciated.
Thanks and best regards,
Nish Kel

Hi,
The OSS note is no more.
moreover, the contract call off for limit order is not a standard functionality.
I am also trying a work around or with development. Keep you updated.
Cheers, Renga

Similar Messages

What table is the contract number stored for Limit POu2019s

Hi,
I wanted to know the table name where the contract numbers are stored for the Limit PO? Are there any specific tables where contract numbers are stored.
Thanks in advance.
Regards,
Deepak BR

Hi Deepak,
i think in the BBPS_MON_SC_ITEM structure we can know the contract no asigned to limit item PO as in that structure the ITM_TYPE field specifices whether it is a normal Shopping cart or Limit cart. And there are many other structures which you can search via SE16.
Hope it helps you to some extent,
Lokesh.

Contract-automatic display sub screen in 'object info parameters' config.

Dear Sir,
What is the utility of 'contract-automatic display' sub screen in 'object info parameters' config.
Where and how we can view it?
For kind help please.
Thanks and Regards,
R N Sabat.

Hi,
Go to tcode OIMD see tick mark to AUTOMATICALLY & carryout following changes
tick mark to if contract under tab contract automatic display
even if you want to see how many contracts are created and completed then speciefy
value in
NotifsCreated - 50 CompletedNotif - 50
50 if you created 50 contracts for object it will display but not more than 50,so you can assign number between 1 to 99
kapil

Contract number in F-53

HI
Contract number field can be seen in layout of t code F-53 but it is not showing in front screen of F-53. I tried to enable it through SHD0 but it is not working for me. Please guide I need help on enabling it.

Hi:
SHD0 will not let you fetch the contract number in F-53. Please use the implicit enhancement MF05A_DYNPRO_SEL_MODIFF01 with the help of ABAPER it will enable you to display Contract number in F-53.
Regards

Pop up message with Contract Number if Contract exists in ME21N in MM

Hi Experts ,
We have ECC6.04 system.We are NOT usning Pur. Requisition.
While creating PO by ME21N transaction code ,w.r.t. Contract if Contract is exist, then we need to find out the contract Number manually for each material in the req Pur. Org., which is very tedious task.
We can craete PO from Contract as a follow on document in ME33, but still 1st we need to find out the contrcat and then go to display of it and then craete Release Order (PO)...but it is not necessary that we will use single contract of same Vendor.
Currently , if contract is exist and we are craeting the PO w/o contract , then system gives Warning Message that '"... but does not gives me Contract Number & item No.
I'm exploring some enhancement, which will give me pop screen with the Contract Number & item No or system will directly insert the Contract Number and item in the item overview with all the detials picked up from it 9from source list)...while creating the PO in ME21N code.
Can anyone suggest, whether it is possible to achive the above by doing any custom devolopment or user exit..etc
Thanks
NAP

You can maintain the contract in source list. On creating purchase order you can go to environment-source list---there you will see the contract number, item number and validity. If the requirement is to see the contract number and item number can be done in this way without any enhancement.
REgards
Sangeeta

Contract number not transferred to back-end PO? Is this an SAP bug?

System: SRM 4.0 - Classic Scenario
Problem:
Iu2019m creating "limit" carts with reference to ECC back-end contracts. The functionality seems to be available in SRM and I expected it to work in the same way as the "describe requirement" shopping carts (i.e. the contract number added to the shopping cart is transferred to the back-end and the ECC PO is subsequently created with reference to the contract)
However, for u201CLimitu201D carts, I've added the contract to the shopping cart, but it does not get passed to the follow-on ECC back-end PO.
These are steps I am following (end-to-end):
1.     Create contract in ECC (ME31K)
2.     In SRM, add Vendor and Contract Number/Item to preferred vendor list and Release
3.     Create u201CLimitu201D shopping cart with relevant material group and vendor
4.     Search and select contract
5.     Order and Approve shopping cart as required
6.     Identify ECC back-end PO number
7.     Display ECC PO using ME23n, select item and check reference to contract. **Contract number is blank!**
If I check table EKPO the Agreement Number field for the PO is blank. I.e. it has not been transferred from SRM to ECC when the PO is created.
As I mentioned, the contract is transfered for "describe requirement" carts, but not "limit" carts.
I have tested this in another system and I have the same problem. I believe this is a SAP bug. We have raised an OSS note, but awaiting a reply.
Has anyone else experience this issue and can provide any guidance?
Matt

Hi Matt,
We have a similar issue. We've implemented SRM 7 in classic scenario with ECC 6.
A limit shopping cart is created in SRM and assigned contract limits. The shopping is approved and creates a purchase order in the backend.
1) The contract number is not available in the limits tab on the purchase order. The expectation was that the contract number from the shopping cart shows up here. BAPI_PO_CREATE1 does show that the information is being passed from SRM.
2) The F4 search for contract in SRM does not retrieve contracts from the backend. The search seems to only look for local contracts.
I would appreciate your insight on this issue and if you could share any information that SAP provided.
Thanks,
Hemanth

Error Message is not displayed on the pop screen for chain end chain

Hi,
I have called a screen in one of the standard program using enhancmenets,
and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen
but it is displaying as log , i want the error should come on the same screen and it should not allow till the correct values are entered , how to handle it
regards
afzal

Hi,
have you tried option "LIKE" with instruction MESSAGE.
Example:MESSAGE ID '38' TYPE 'S' NUMBER 000 DISPLAY LIKE 'E' WITH 'My Message'.
And instead of using a MESSAGE instruction, why to not use a popup ?
Like using one of these function modules (for instance):
TMS_BCU_POPUP_TO_CONFIRM
POPUP_TO_CONFIRM_STEP
POPUP_TO_DECIDE
FC_POPUP_ERR_WARN_MESSAGE
etc...
If that does not work, perhaps it's your ehancement which is not the good one or perhaps you have use a second one.
Regards
Mickael

My 4th gen ipod touch has crashed, just displaying a dark blue screen. It won't turn off or do anything. Connecting it to the laptop does nothing either. Is this common and any ideas??

My 4th Gen ipod touch has crashed, just displaying a bark blue screen. It will not turn off or respond to any buttons being pressed or held for a number of minutes. Connecting to the laptop does not help either. Has anyone had this happen on their i touch or have a solution??
Thanks

If not successful, try the remaining actions of:
iOS: Not responding or does not turn on

How to get the contract number selected on VA01.

Hello Experts,
While creating a sales order a contract number is selected.
ie to which contract this SO is being created.
We get a ALV list with list of contract number and we select one.
But no where this contract number is displayed.
I have a placed a input/output box on additional tab header leve of VA01.
I need to display the contract number selected by the user for that sales order on to that box.
and this should happened the moment the user copies the contract number from the ALV list
any functon exit or badi's which could be used to get the value.
right now iam using the include MV45AFZZ
I know the table getting used.
Thanks in advance.
Regards,
Ranjith

You can put your code into the MOVE_FIELD_TO_VBAP userexit in include MV45AFZZ. The contract information is stored on item level (VBAP) in fields WKTNR (contract number) and WKTPS (contract item). If you can have more than one contract in a sales order you should display that information on item level rather than header level, if you always reference one contract only per sales order header should be fine.
Hope that helps,
Michael

I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
Here is an image of the issue
http://www.flickr.com/photos/67839707@N08/8884847081/

I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

In the source list contract Number is not showing up.

On 10.11.2010
we added this Material 2211583 to contract 4600000149.
When we do display source list it is still not showing up.
Contract 4600000149 Validity Start 04.02.2008 Validity End 31.12.2009
We have changed validity End date for Contract to 31.12.2010;even then it is not showing up in source list
Is there any possibility to get Contract number in the source list
Thanks in advance
SAP MM

what did you do to get the contract into the source list for this item?
it does not create a source list item by itself, only because you entered the item in a contract.
You can either create the source list entry from the contract via menu. or you have to enter the contract manually in ME01 or you generate the source list with ME05

A conversion error occurred while the program -- display data on the screen

HI all,
Iam getting a dump error described below:
A conversion error occurred while the program was trying to
display data on the screen.
The ABAP output field and the screen field may not have the
same format.
Some field types require more characters on the screen than
in the ABAP program. For example, a date field on a screen needs
two characters more than it would in the program. When attempting to
display the date on the screen, an error will occur that triggers the
error message.
              Screen name.............. " Ztable_MM_MRQ "
              Screen number............ 0100
              Screen field............. "WA_PO_ITEMS-MENGE"
              Error text............... "FX015: Sign lost."
Further data:
Give us step by step procedure to rectify the same with T.codes
Thanks
Regards
Siraj

Raymond
please give details in se51 where i have to put a "V" to allow negative amounts
whether it is in Text or I/O templates
name                                     type of screen element         Text or I/O field
WA_PO_ITEMS-MENGE     Text                           PO_quantity__
regards

Contract Number in Post clearing document

Hi,
I have open item in customer account as 15000 and after clearing the full amount in document number Contract number is not displaying but when I do partial payment (like 500) Contract number is appearing in clearing document.
Anybody can help me out how I can get Contract number in post clearing document (Full amount clearing).
Br,
CM

Hi CM,
please refer to the information in SAP note [151867|https://service.sap.com/sap/support/notes/151867] which explains the necessary configuration (in module FI).
Hope this helps.
Regards, Franz

Contract not visible in Account Balance screen in UI- Role- Utility IC Agen

HI Gurus
We are in a CRM ISU implementation. We have generated bill against contract and invoice also at CA level in ISU. We are able to see the open & due amounts in Account Balance screen in CRM against the Business Agreement only. There is standard field Contract also available in CRM in account balance screen. But we do not see any contract in the field.
Middle ware is in place and data is in sync.Data flow of BP, BA & contract is from CRM to ISU
Please guide how the value of contract is displayed in CRM.
Thanks
Ritesh

Hi gurus..
any advice

In Executable program displaying results in custom screen.

Hi,
I have a executable program, when the program display's the out put of this program I need to display output in custom screen (like screen 100) instead of displaying in default List screen.
Can any one tell me how to create and display output in that screen.
Thanks.
Chris.

Hi,
Check the pseudo code....
Start-of-selection.
Retrieve data
End-of-seleciton
call screen 0100.
*PBO
form PBO_200 output.
endform.
*PAI
FORM PAI_200 input.
endform.
To call Screens use any of the following commands
1. CALL SCREEN scr.
Addition:
... STARTING AT x1 y1 ... ENDING AT x2 y2
Effect
Calls the screen scr; scr is thenumber of a screen of the main program. You use SET SCREEN 0. orLEAVE SCREEN. to define thereturn from the CALL screen.
Addition
... STARTING AT x1 y1 ENDING AT x2 y2
Effect
The coordinates x1, y1 (start column andstart line in the window) and x2, y2 (end column and endline in the window) define the size and position of the CALLscreen ("top left - bottom right"). Besides these coordinates,you can also see the contents of the primary window, but cannot performany action there.
Note
If "ENDING AT ..." is not specified, suitablevalues are substituted for x2 and y2, taking into accountthe size of the called screen.
Note
Runtime errors:
DYNP_TOO_MANY_CALL_SCREENS: No further screen level (callscreen); the maximum number of nested screen levels is restricted to 50at present.
2. SET SCREEN scr.
Effect
In ABAP dialogs: Sets the number of the nextscreen.
Screen number scr is then processed when the current screen has finished.
Example
SET SCREEN 200.
Notes
To leave a CALL SCREEN chain or return to the application menu, use one of the followingstatements:
SET SCREEN 0. or LEAVE TO SCREEN 0.
I hope this solves your problem.
Regards,
Vara

Contract Number Display in Limit PO screen

Similar Messages

Maybe you are looking for