Control chart title in chinese (QE51N)

Hello,
In the QE51N transaction, there is a control chart. The english title is "Acceptance chart for x-bar / samples". In the V_QPSH view there is the translation in chinese: "承兑图，用于 x 条 / 样本". But the chinese title doesn't appear correctly in the chart control. Indeed, i have "???????X ? / ????".
I try to change the regional options of my computer in chinese but i still have the same title with the ?.
What must i do in order to have the correct title?
Thanks by advance,
Laurent.

This can also be an authorization issue.
There is an authorization object S_TRANSLAT ( translation environment) which checks the authorization for translation in deifferent languages and texts.
Please ensure that you sufficient authorization for the fields Activity, Language & Text in this object.

Similar Messages

Change Diagram Type in Control Chart in QE51N

Hi
I'm using the QE51N to record the results.
I press the Control Chart Button and it's OK.
I change the Diagram Type from "Lines" to "XY" (Dispersion), but the change isn't keep it for the other characteristics, or if another day I execute the QE51N the Diagram type remains like "Lines"
Is it possible to change the diagram type and keep it forever? I have used the "Save Mode" button but doesn't work.
Thanks a lot for the answe.I will give the points.
Take care,
Francisco

Dear Fransisco
Try to change the same in the configuration. It might help
SPRO > QM >Quality Control > Define Graphic Types for Evaluations of Original Documents > here choose 003 for control chart and change the chart type on the right hand side
Regards
Gajesh

How to use the region parameter of main report for subreport chart titles?

I am using Crystal Reports 11.
I create 1 main report with 10 sub-reports that contain cross-tabs & charts. The main report has a parameter regarding 3 different areas: region1, region2, and region3.
I use the method of adding the u2018regionu2019 parameter of main report to the selection formula of the sub-reports. So, I can select 'region' from main report to controll outputs in sub-reports by region.
I use formulas for chart titles, e.g.:
Select {Product Code}
Case 'a111':
u2018Region1 u2013 a111 Counts'
Case u2018b222u2019:
u2018Region1 u2013 b222 Counts'
u2026
u2026
Default:
u2026
Since I pass the u2018regionu2019 parameter of main report to sub-reports, I have to change chart titles dynamically based on the region I select.
How can I use the region parameter from main report in the formulas to get chart titles dynamically?
Thank you in advance.

Thank you.
I am not using Chart Title with "Chart Expert".
I am using a formula for chart titles, e.g.:
Select {Product Code}
Case 'a111':
u2018Region1 u2013 a111 Counts'
Case u2018b222u2019:
u2018Region1 u2013 b222 Counts'
u2026
u2026
Default:
u2026
I drag this formula above the charts and it looks like a dynamic title. So, for product a111, the chart title would be "Region1 u2013 a111 Counts"; for product b222, the chart title would be "Region1 u2013 b222" Counts; and so on ...
Because I pass the region parameter from master report to subreport, I want to change the region part of the chart titles dynamically.
For example,
when select Region1, the chart titles should be: "Region1 u2013 a111 Counts"; "Region1 u2013 b222"; ...
when select Region2, the chart titles should be: "Region2 u2013 a111 Counts"; "Region2 u2013 b222"; ...
I want to add the region parameter into the tiltle formula.
How should I do?

Line Break in Chart Title??

Hi! Does anyone know how to make a line break in the title of a chart? For some reason, just pressing return or any combination of return with option, control, shift, etc. does not seem to be working... the title is really long to be on a single line and I'm not able to change the size either.

Hi kp,
True for Category titles, which are taken from a header column (see examples— Cat 1 through Cat 4 on table and chart below), but not for the Chart title, which displays an option return as a space, and whose box extends horizontally to accommodate the whole title in a single line, even when that line extends beyond the screen/page boundary (see example on chart).
Table names, when shown, are carried in a box that expands only to the width of the table to which they belong, which led to the example above the chart:
For the table example, there are two tables,
"Table with...title" contains two columns, and is placed behind "Table 1", the table containing the data. Only the first table has the Show title box checked.
Just a parlour trick, though—no advantage I can see to using this method of displaying a long table name over using a text box, as suggested earlier by Jerry.
I can see where your suggestion regarding category names could have some merit, though. Its disadvantage is in doubling the height of the rows from which those names are grabbed.
Regards,
Barry

Is it possible to develop the control charts in WAD.

Hi Gurus and Experts
We need your suggestions to go futhure with our requirement.
Right now KPI's are currently displayed in graphical form with the
ability to drill down into WO's( Work orders) from the graph page. our
new requirement is to get exactly the same set of information captured
and presented in control chart form. This is to be an adjunct. to, not
replace, the existing graphical set of data. Upper and lower control
limits will be set initially by the business, and the same drill down
functionality should be available from the control chart. The charts
can be displayed seperately from the exisiting set of charts if this
makes it easier.
Can you please suggest us whether is it possible to develop the control
charts and also have the functoinalities of the existing dashboards
(example drill down of WO's using the control charts) in WAD or through
viusal composer
Waiting for your responses..
Thanks
Ravi...

Hello dj_page!
Thanks for the answer, but I know this already.
My problem is, that the small picture in the side panel and the histogram in LR5 are bigger than in LR4.
The two pictures are showing the difference between the versions.
On the left hand (LR4) you can see a smaller preview and histogram than on the right hand (LR5).
In each version you can change the size of the side panel only as small as the preview-window is.
The pictures are also showing the smallest size of the side panel in each version.

Implementing SPC/Control charts in Reporting Services/BI Solution

Hello All
I'm one of the BI specialists in our company - currently looking after our BI solution which incorporates SQL Server 2005, SSRS, SSIS, SSAS, Performance Point, Pro Clarity and various other bits and bobs etc.
What I'm aiming to do, is establish a suite of SPC/Control charts for our portal, based on the suite of cubes we already have. At the moment, I'm thinking of producing these in the SSRS environment, but I'm open to suggestions!
As a starting point, I've created the necessary charts in Excel (calculating averages, standard deviation, upper/lower control limit) etc, but now I'm looking at implementing it in our DWH.
Third party software may be an option (such as Dundas, which keeps cropping up in my crusades!) but I'd like to perhaps generate these myself - if I'm not asking too much that is!
Any advice greatly appreciated...
Cheers
Lee

Hi Lee,
Based on your descriptions, you want to implement Statistical Process Control(SPC) chart in SQL Server Reporting Services. If I have misunderstood, please do not hesitate to let me know.
By default, we only have Column, Line, Shape, Bar, Area, Range, Scatter, Polar charts in SQL Server Reporting Services. As a workaround, we can anaylze the data using SQL Server Analysis Services, and then use these chart to display the data in SQL Server Reporting Services. We can use parameters to filter data.
Third party software may be an option. However, if you want to implement these charts by yourself, we can implement a custom report item in SQL Server Reporting Services. We can start it from here: http://msdn.microsoft.com/en-us/library/ms345231.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

How to generate control limits in control chart

I want to generate a X bar chart with control limits, sample size is Fix- 1.
SPC criterion I selected is 020 ie Task List characteristics/ Material.
1)Sampling Procedure I used- Fixed-1
2)Valuation mode I used- Attrib non conforming units/ manual.
3)Control chart I am using is 110- Shewart chart for X bar.
But when I click for control limits in chart it is saying control limits for track 1 could not be calculated.
Could anyone guide me, how to generate control limits for this graph. Sammple size will alwyas be 1.
Please let me know should I change control chart type in this case.

Hi Jaison,
You should use valuation mode - SPC valuation in sampling procedure.
Also you have to use sampling procedure with inspection points.
as practically every hour or depending on the frequency decided we collect the measurements and calculate the SPC.
now after correction in the sampling procedure create new inspection lot and check SPC.
try out and revert.
Regards,
Anil

Changing the Chart Title in Graphic View in Interactive demand Planning

Hi All,
Is it possible to change the Chart title in Graphic View in interactive demand planning screen.
When we go to interactive planning after loading the data we go to Univariate forecast then switch to graphic, the chart title shows the selection at which the planning is done. For eg; If I plan at die level and i select a particular sap material, the chart title displays Die value and not the material value.
Is it possible to change the chart title such that it displays all the selections made in selection winodw, like in the above case both Die value as well as SAP Material Number.
Thanks and Regards,
Diana

Dear Diana,
unfortunately this is not possible.
The chart title is build from the planning book name + the Show characteristic in the shuffler (+ available nav. attributes of the Show char).
The functionality you requested doesn't exist in standard.
Regards,
Tibor

Flex 4 Chart title won't move when positioned

Hi,
I have an issue with my horizontal chart title in my Flex 4 bar chart--it just won't move when I try to position it someplace other than the default (which is center).
I followed the example in the livedocs: http://livedocs.adobe.com/flex/3/html/help.html?content=charts_displayingdata_05.html, specifically the one using the 'titleRenderer" property of the AxisRenderer, and setting it to my custom AxisRenderer class. Here is my code:
package classes.view
    import mx.charts.*;
    import mx.charts.chartClasses.ChartLabel;
    public class ChartTitleRenderer extends ChartLabel
        public function ChartTitleRenderer()
            super();
        override protected function updateDisplayList(w:Number, h:Number):void {
            super.updateDisplayList(w, h);
            this.setStyle("textAlign","left");
Setting the textAlign property doesn't work. I have tried setting this property in the css as well and applying it directly to the axis, which also doesn't work. I have also tried "this.x = -100" etc, to no effect. Any ideas?
Thanks

Ray,
To do the "masking" that you are referring to, I think that two Effects (explore each, to see which works best for you), will give you what you want:
The Crop Effect, applied to the Still Images in Video Track 3. This Effect can be Keyframed to change, as is required over time.
The 4-Point Garbage Matte Effect.
If the Still on Video 2 is sized to the Frame of the Project, say 1920 x 1080 for Full-HD, it will "cover" the Video on Video Track 1.
Note: it is best to Scale the Still Images to very close to what you want/need, in PS, or PSElements, prior to Import. What you are doing with the Still Images in Video Track 3 is creating a PiP (Picture in Picture). This ARTICLE goes into more detail on
Good luck,
Hunt

Control Chart Query

Dear Experts
As part of SAP QM Implementation we are implementing control chart functionality to get graphical representation against measured values for pre-defined parameters. I am facing two issues mainly:
1. When I try to calculate control limits (clicking calculator button) getting message "Control limits for track 1 could not be calculated". MICs has the upper limit and lower limit maintained which I can see in QAMV table for the inspection lots.
2. In the attached control chart , I am getting Upper Limit, Lower Limit and the Valuated Result in graphical form, when I try to display the inspection date, for the characteristics against inspection lot, I get lost. System is showing some date 7/14/14 against all the characteristics which I am not sure how to achieve.
Settings I made:
Sampling type: Fixed sample
Valuation mode: SPC inspection
W/O inspection point
Sample size: 5
Chart type:115 Shewhart chart for X bar/USA
MIC Settings:
Quantitative / Lower / Upper Sp. Limit / Sampling Procedure / SPC Characteristics / Summerised Recording / Required Char.
Inspection plan setting is:
SPC criterion : 020 task list char/material
Base qty : 1KG
Control Chart Configurations:
1. Control Chart Type -115
a) Change Control Limit not checked
b) Characteristics Type- Fixed Scope, Record measured values
c) Reference Axis (x-axis) - Time of Creation ( Do I need to change here to "Object Number" or "Time Of Inspection" ?)
Any input will be highly appreciated.
Regards
SK

Hello,
For Control limits your chart needs to closed. and offcourse for calculation u need to have more than one inspection lot. then system will calculate the same. UD is also required against lots.
Regards

How to modify a chart title

I have created a chart in Keynote with a title. But the title is really close to the data, and I would like to increase the space between title and chart, but I don't know how. I cannot even cheat by adding a return and creating an empty second line below the actual title.
I know that I could create a seperate textbox to avoid this problem, but I will have to create many charts and I want the distance to be always the same, and I need the feature to turn the title on and off.
By the way: it is a line chart.
Message was edited by: How to modify a chart title

Dear How to modify a chart title,
I think you're going to have to become accustomed to the default position of the title. You can Provide Feedback to Apple using the form available in the Keynote app menu and tell them that you would like this option on the Chart Title feature. My guess is that it won't be high on their priority list since you do have the text box option to fall back on.
Good luck,
Jerry

Print out of control chart

how can i take the print out of the control chart and also the necessary data like Cp Cpk values.
My exact requiremnt is, i want X-bar chart, R chart, all statistical values and also the results recorded of that characteristics on 1 page.
How is it possible?
Message was edited by:
        sandip raut
Message was edited by:
        sandip raut
Message was edited by:
        sandip raut

Hi,
you can use the t.code for OPK8-DEFINE PRINT CONTROL
(SPRO> PRODUCTION> SHOP FLOOR CONTROL --> INTEGRATION --> DEFINE PRINT CONTROL.
This is your mentioned requirement matched. pls check with this t.codeOPK8.
Regards,
Mohan R

How do I remove Sub Title w/o removing Chart Title in components?

I'm trying to remove the Sub Title area from a component by unchecking the Sub Title box under Appearance/Text tabs but this also removes the Chart Title. Is there a way to remove just the Sub Title w/o the Chart Title? I'm using a bar chart component.

Hi Lora,
This is by design.
May I suggest just removing any subtitle data (or binding) as this will remove the element from your chart.
Thanks,
Gerrit

How to see Control chart for a specific date range in QGC3

Hi
I am developing SPC for my client.I am facing one problem.
I am using one control chart for all inspection lot for a particular MIC.Free inspection point is used in inspection plan.
Control chart is used 516.(XMR chart)
Now when i am calling control chart for MIC executing QGC3,chart is showing results since creation chart date to todays date.
Now if i want to see chart for a particular period or date range,what is the procedure.
Thanks in advance
Nilanjan

Hi,
1. Even though when i give the Created on, and to date the system is displaying the report which is prior to the created on date.
2. Similarly the report data is different when the field is maximum no of Hits is given. for example when i giving this field as 10, 20, 30, etc the report is showing only 10 line items. if i enter 50, 60 etc it is showing the list for half i given.
Note that system is having more than 1000 line items to display..
Regards,
R. Loganathan

QM Control Chart Limits

I'm having trouble with the X bar and S chart control limits. I am not able to get them to calculate as expected. Also, I'm not clear on what the number parameters (parameter 1, 2, 3, and 4) in the IMG do.
Has anyone out there successfully set-up SPC charting? If so, will you please give me some pointers? We are collecting the mean and standard deviation for each of our test parameters by inspection lot. The number inspected varies per inspection lot.
Thanks,
Bob

Hi Shailendra,
After I change the SPC criteria to "070 MIC/Material" in insp. plan, the control chart shows multiple insp. lot result successfully.
But the system auto collect all the corresponding MIC/Material in one item (ex. 19th). Is there any way to separate the result by every month?
Thanks.

Control chart title in chinese (QE51N)

Similar Messages

Maybe you are looking for