Control Code field in Material master- Foreign Trade imports tab

Hello Experts,
I am trying to understand the purpose of Control Code(MARC-STEUC) field in Material master- Foreign Trade imports tab. I am also interested in knowing where does this field appear in our PO.
Please help..
Manish

Normally control code specifies the norm to follow by the supply plant for a sale of exposrts. each contry will have a set of rules to get follow as a stuatory . this code specifies the rules or certificates.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/93/7443a5546011d1a7020000e829fd11/frameset.htm
may be comes in a sale order.
Regards

Similar Messages

  • Error in Excise Data subscreen in Material Master:Foreign Trade-Import Data

    SAP Net Weaver ECC6.0
    I have added the 'Excise data' subscreen in Material master 'Foreign trade IMport' and 'Foreign Trade Export' tab. But facing the following problem. please help.
    There are two buttons called 'More' and 'PreVals' in that subscreen. If I click either of them, it gives an error message as below
    "Record 21 MORE does not exist in table T133E
    Message no. M3748"
    and
    "Record 21 J1PR does not exist in table T133E
    Message no. M3748"
    Kindly help what to do

    OK
    Lets starts from first step.
    Go to OMT3B
    1.  Copy 21 and make it 91
    2. Then from left hand side select Data screens no 15 copy it and make it 91 - Z1
    3. Then again go to left hand side   Subscreens and copy 6 and make it 91 - 71 - z and assign screen no 2205 and add prograne as SAPLJ1I_MATERIAL_MASTER
    save it
    Then go to OMBt3E and copy 01 -* HERS * 12 and mahe it 01 -* ROHor FERT * 91 and save it and then check and revert back
    regards

  • Control Code in Material Master Foreign Trade Export view

    Hi All,
    In material master Foreign Trade Export view we have a field Control Code (MARC - STEUC) i would like to know where do we configure these control codes in SPRO?
    I need to know the path to configure them
    Regard s
    Pavan

    spro@Logistics - General@Material Master@Material IDs@Maintain PKWiUs
    Regards,
    Indranil

  • Legal Control data for a Material in Foreign Trade View.

    Hi All
    We are facing the  problem for updating the Legal Control data for a Material in Foreign Trade View.
    Is there any BAPI for doing that ?
    Please guide me.
    Thanks in Advance
    Regards
    Kiran K Vadrevu

    We figured this out.  We used SM30 to find table / view V_T604F  and add a value for country US.
    Edited by: MacaryD on Feb 4, 2010 5:13 PM

  • Activating a CARE CODE field in Material Master

    Hi All,
    I need to activate one field CARE_CODE in MATERIAL MASTER. Can anyone guide me how to activate the same.
    Let me know if any additional details are required
    Regards,
    Raju

    Hello,
    if you display table MARA by transaction SE11, then do a doubleklick on include WRF_MARA_STY, then go to attributes-tab, you can see that this  include belongs to package MGW (Application development R/3 material master Retail).          
    It belongs to IS-Retail, and only visible on a standard system because parts on IS-Retail are embedded in Core.
    But you cannot make these fields visible on a non-IS-Retail-System.
    br, Gabor

  • LIFO _ Relelevant Field in Material Master - LIFO IndicatorAccounting 2 TAB

    Hi anyone knows how LIFO works? LIFO Indicator located in Accounting 2 TAB. Is this working in terms of price of material?
    Edited by: SHeryl Manahan on Sep 22, 2008 3:53 AM
    Edited by: SHeryl Manahan on Sep 22, 2008 3:57 AM

    Hi,
    SAP provides facility to add new fields/tab pages for the material master transactions.
    Please read the documentation in the below path available in SPRO/IMG configuration
    IMG/SPRO -> Logistics-General -> Material Master -> Configuing the Material Master..
    There is a quick reference guide: "Here's How (Quick Guide using an example)
    Regards
    Shiva

  • Foreign trade import/export data is getting copied when creating MMR

    Hi,
    When trying to create material master record with reference material ,the" Foreign trade import/export data " is not available in selection but the material is getting created with the "foreign data".
    When to restrict so that the material master record gets created without "foreign trade data"
    Thank you.

    HI,
    When u enter the new material,matl type & industry u enter the reference material and press enter then it shows the select views screen in this deselect the foreign trade tab and press enter then create material.The foreign data tab will not be copied in the new material.
    murugan

  • Foreign Trade Import/Export Tab in Material Master of SAP R/3

    Hi
    What is the use of Foreign Trade Import/Export Tab in material master of SAP R/3

    Hi Akhil ..
    Sounds like you need to enrol for the SAP Foreign Trade training course!
    The tab holds various attributes for determining Foreign Trade data - for example the Customs classification and Country of Origin.  Those data are used to determine and/or populate fields in the Foreign Trade data when processing MM and SD documents.
    Some, but not all, of the fields in that tab become redundant if GTS is in use.
    If you have more specific questions in this area, it might be easier to give better explanations.
    Regards,
    Dave

  • How to Maintain Control Code Field in Foraign Trade Export Tab.

    Hi All,
    How I Maintain Control Code Field in Foraign Trade Export Tab. U can check this field with executed MM02 and Tab "Foraign Trade Export Tab"
    How I  add one more value in masters.Where is the screen and what is the T-code or Options for maintain the above data.
    Urgent
    Thanks all,
    Tapovardhan

    Hi
    I just checked the Documentation and it is for Poland. This might not be useful. Try the T-code that I had given or the path is SPRO->SD->Foreign Trade/Customs--->Basic Data for Foreign trade and Define comodity codes/Import codes by country.
    Please reward if this helps.
    Thanks

  • Multiple Country of Origin at a Material Master level- Foreign Trade import

    Hi Gurus,
    We have a requirement to store Multiple Country of origin at a Material Master level . One Part/Material is sourced from different vendors and they are manufactured in different countries . Please note that we are not using Batch Management . Is there any workaround to have this scenario without using standard Batch Management .
    Thanks,
    Prabuddha

    hi,
    you can use split valuation for this by using the valuation category field in material master in accounting 1 view.
    in this you have to maintain valuation category as "H" = ORIGIN.
    For split valution procedure you have to reffer the  follow this link.
    http://www.sap-img.com/mm025.htm
    THANKING YOU

  • MM Manage mandatory field in material master data

    Hi,
    i need to manage some fields in MM01 and MM02 in order to have these fields mandatory if other fields have particular value. For example, if material type is ZFER and Prod.hierarc (in Basic Data 1) is AL001, only in this case i want that field Comm./imp. code ,in view Foreign Trade import, is mandatory.
    I'm looking for an user-exit. I find EXIT_SAPLMGMU_001 but with this solution i have a problem. The mandatory of field is active only during saving, on the contrary i would like that this mandatory will be similar to the standard.
    Thanks for help,
    Michele Garofalo

    Hi,
    I would like to make a field mandatory in Master Data.....how can i make a field mandatory field?
    please provide me solution for this one
    Cheers...

  • Purpose of Cash Discount field in Material Master

    what is the purpose of Cash Discount field in Material Master. what does it control. do it link to SKTO anywhere?
    please explain

    Hi,
    Cash discount is applicable for this material or not..
    This is for Sales only..
    Pricing Procedure (RVAA01) and if you activate SKTV and SKTO Condition types
    Cash Discount can calculate before tax or after tax
    Condition Type- SKTV(Statistical Condition Type)---If you check requirement is "14" which says Discount before Tax( This will calculate from the Filed Material master "Cash Discount Indicator" ie "SKTOF"
    Condition Type-SKTO-(Statistical Condition Type)--
    >Requirement "9" Discount After tax - here also it will consider filed "SKTOF" ie "Cash discount indicator in material master.
    SAM

  • New standard field in Material master

    Hi
    I have to introduce "RETDELC" field in Material Master.
    The said field is already available in MARA table.
    The field is available only in ECC 6.0 version.
    I have introduced the field in Field selection group and make it optional at client level, material type level and Transaction code level (MM01,MM02, MM03).
    But stil, i could not get the same field in Material Master- Basic Material data-2 view.
    Any help please!
    Regards
    Prasad

    this fields domain is DFPS_RETDELC .
    DFPS stands for Defense Forces & Public Security.
    In order to use this industry solution, you need to activate additional business functions
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/d8/686660a46d486e95f0a3588111376d/frameset.htm

  • Transportation group field in Material master..Sales/Plant data tab.

    Hello Gurus,
    The transportation group field in material master is Material specific or a plant specific?? caz whenever i am changing this transportation group field in one plant it is also updating with the same value in all the plant for the common material even though the Company code and Country are different forall the plants.
    Hope to hear from you soon as its a very high priority production issue..
    regards
    Rikinl

    The transportation group field in material master is Material specific or a plant specific??
    Its material specific.  Even if you have multiple sales areas or plants and if you change the transportation group, the change will be applicable for those areas also.
    thanks
    G. Lakshmipathi

  • Hide field in material master

    Hi Friends,
    I want to hide a field in material master can some please give the step by step method of how to do the same.
    Regards,
    Wasim.

    Hi,
    Follow the steps to hide a field in material master:
    1.Just click the TAB ,(Which you want to HIDE )and get the field name (Press F1 & then in next screen click technical information)
    2. Use T.Code: OMSR and enter that field name and get FIELD SELECTION GROUP
    3. Use T.Code: OMS2 and click your material type(you used to create that material) and in next screen check Field reference ( you have assigned for the material type){{ ( example-->For ROH material type the "Field reference" is ROH)
    4. Now use T.code:OMS9, Double Click your "Field Reference" and select  FIELD SELECTION GROUP  & select round box of  HIDE  and save.
    Regards,
    Biju K

Maybe you are looking for

  • New iPod Touch stuck in recovery mode during initial setup

    I am trying to set-up my daughter's new iPod touch 5th Gen. When you try to connect to iTunes message says "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes". Even when you disconnect from com

  • BT Infinity evening and weekend speed drops

    Hi, I have a BT Business Hub 5 and Infinity package. My connection during the working week in the day is usually around:  27.95MB/s down, 4.63Mb/s up and a ping of around 20ms. Often in the evenings and on weekends the speed drops to around: 1.5MB/s

  • Zenserver process dead after installing June 2011 PRU

    ZCM 10.3.1 on SLES We were trying to image a new model of computer, Lenovo M91p, and having problems getting PreBoot service to launch. Thought perhaps the latest PRU would fix it. So downloaded and deployed the June 2011 PRU, and rebooted the server

  • How do we simulate an event to test the open SR function

    Do we have details on how to simulate: An event on a device so the customer can test/experience how alert process works and-. An event on a device so the customer can test/experience the alert with SR create process. The Deployment Guide states we ca

  • JGRASP issues when compiling Java programs

    I installed both the JRE and the SDK newest versions and it still gives me issues. ----jGRASP exec: javac -g C:\UNCC\ITCS 2215\Program Assignment 2\WordFind.java ----jGRASP wedge2 error: command "javac" not found. ---- This command must be in the cur