Control the creation of excise invoice without chapter id

Hi All
If Chapter ID is not maintained for a material in J1ID, can we control the creation of the sales excise invoice (J1IIN) for that particular material.
Thanks in advance
regards
Ram A

Hi Rajesh
Thanks for your reply.
Eventhough the chapter ID is not maintained in the Material Master or in J1ID, the system will allow the creation of the sales excise invoice (J1IIN) without any excise duties in case of TAXINJ and with excise duties in case of TAXINN.
My requirement is that the system should restrict the creation of sales excise invoice for the materials without chapter ID.(Any User exits ???)
regards
Ram A

Similar Messages

  • SYSTEM CHECK FOR CREATION OF EXCISE INVOICE WITHOUT PGI

    Hi SAP guru's i need help in this issue++
    See i am creating delivery and i did'nt do PGI ,after this i am creating Proforma invoice (here Proforma is must before creating commercial Invoice),with reference to Proforma system is accepting to create Excise invoice without PGI.so,i want system should'nt allow user to create Excise Invoice until unless if he do PGI.I know there is routine for PGI and proforma,is there any kind of routine for PGI and Excise invoice
    Thanks & Regards

    Dear sapsd79,
    it is related to copy control - item level
    check the following link,
    Restrict proforma invoice
    any doubt , please revert
    saravanan
    Edited by: k saravanan on Sep 30, 2008 11:42 AM

  • Creation of excise invoice before billing document

    Hello Experts,
    Our user is creating excise invoice for xyz material (own manufactured products) dispatched from the plant after creation of the commercial invoice.
    Now it is required to create the excise invoice before creation of billing documents.
    How this is to be done? suggestions please.
    Regards,
    Raj

    First, U Need to Change the SPRO Setting Like Below:
    In VTFL, you should maintain both copy controls for
    u2022     Delivery (LF) --> Proforma (F8)
    u2022     Delivery (LF) --> Commercial Inv (F2)
    Once you do PGI, in VF01, you have to select manually the billing type F8 and save the proforma. Based on this proforma, when you access J1IIN, system will ask for Billing document reference where you can input proforma reference.
    Creation of Proforma Invoice is required for the creation of Excise Invoice for Sale.
    The transaction codes are :- VF01 :- for creation of Proforma Invoice
                                              VF02 :- for change of Proforma Invoice
                                              VF03 :- for display of Proforma Invoice
    While creating Proforma Invoice the Billing Type to be changed to u201C Pro Forma Invoice for Delivery u201C as shown in the screen shot and then Delivery Number to be entered in u201CDocument u201C field . After executing and Saving the transaction Proforma Invoice will be generated.
    So restriction in Authorization is required to allow only Billing Type u201C  Pro Forma Invoice for Delivery u201C for those who will prepare Proforma Invoice .
    P Kamal Kumar

  • Creation of Excise Invoice J1iin without goods movement (against PV Bills)

    Dear Expert,
    Could you please explain how to create an Excise Invoice j1iin,  in one scenario where goods movement does not take place.
    I am creating a sales order with a service material called price variation and billing it through VF01. Now on the basis of this invoice, i need to create an excise invoice either manually or automatically. Please advise urgently.
    thanks.

    HI
    As per std SAP you can not create the Excise invoice without any goods movement as said above.
    However, if the excise authourities ask for the excise invoice for sevice items with the declared number ranges(say 70000001- 700009999)  then, you can assign this number range to the service billing type in VN01 for this service billing type.
    Hence, when u create the service invoice (commercial invoice) it will generate the invoice number with the number  70000001 as declard to the excise authourities. Also you can take the print out of this with the reqd number..
    P.S: Nevertheles, You are not going to take any credit against this service invoice as it does not ahve any goods movements.
    Hope this helps.
    Reg,
    JJ

  • SAP-MM CIN Error: JTAX Access sequence missing at the time of excise invoice creation in J1IS

    Dear Sir,
    During creation of excise invoice with ref to material doc system give a error massage JTAX access sequence is missing. Access sequence and tables are already exist in system.
    1.PO
    2. GR with excise capture& post here Part-I&II are genarated.
    3.Invoice
    4.Return delivery with reference to above goods receipt document.(122 m.type)
    5. J1IS- Creating outgoing excise invoice w.r.to return delivery material document.
    JTAX Access sequence missing at the time of excise invoice creation in J1IS

    The same error coming while consignment stock issue to cost center.
    1.Consignment Info record with excise tax code.
    2.PO consignment purchase order.
    3.GR with excise capture & post here Part-I&II documents are created.
       Material document created but there is no accounting document.
    4.While doing Consignment stock issue to cost center system generate an error message
    Access sequence JTAX missing  ( ) Message no. VE306"

  • After J1IIN Creation of Excise Invoice, wat is the next immediate actions

    after J1IIN Creation of Excise Invoice, wat is the next immediate actions/activities with respective to SD Point of view.
    In each level wat r the things of updations happen upto end of Excise process in SD
    WAT R THE THINGS R TO BE CHECKED IN EACH LEVEL

    Hi,
    for SD point of view we only do the RG1 extraction and printing only.
    If u want to see the Updation of RG1 check the Table:  j_1irg1. Here u can find the values that are updated.This can be updated only after the Extraction of the RG1.
    Printing the RG1 go to T.Code : J2I6
    Prininting of the Excise Invoice : J1IP.
    I hope this will clarify u r doubts.
    regards.

  • Regarding Error in Tax Codes after Creation of Excise Invoice.

    Dear All,
    We are using TAXINN Procedure,I have maintained condition records and given the correct tax codes in them for Basic Excise Duty,Secondary Cess and Higher Secondary Cess on the table 357,however after checking the accounting document which is created post creation of excise invoice the wrong tax codes are getting picked up however when i create my commercial invoice and check the tax codes the correct tax codes are coming,please advice what needs to be done to rectify this error.
    Best Regards
    Atul Keshav

    This query is now resolved

  • Error in Tax Code after Creation of Excise Invoice

    Dear All,
    We are using TAXINN Procedure,I have maintained condition records and given the correct tax codes in them for Basic Excise Duty,Secondary Cess and Higher Secondary Cess on the table 357,however after checking the accounting document which is created post creation of excise invoice the wrong tax codes are getting picked up however when i create my commercial invoice and check the tax codes the correct tax codes are coming,please advice what needs to be done to rectify this error.
    Best Regards
    Atul Keshav

    Hi
      If you are using TAXINN procedure, check apart from VK11 check you have maintained TAX CODE for excise condition types. Example FTXP or VK19 (using application as TX). Also check whether you are using UTXJ condition type. If you are using UTXJ condition type then please remove it.
       For TAXINN you need not have UTXJ condition type.
    Regards
    MBS

  • Creation of excise invoice automatic.

    Hi All,
    I have an one doubt. i have done setting for creation of excise invoice automatically.
    Here is only one excise and series group.
    So when i do the domestic sale, excise invoice gets created automatically but when i do the export sale and create the commercial invoice , excise invoice does not  create automatically.
    Is it happening because we are using same excise and series group or some thing else?
    Note- If i remove the automatic setting and create the excise invoice seperately in both scenario, it is getting create.
    Jalaj

    Hi
    There is some basic requirements to create the automatic Excise Invoice like :-
    A) Specify the CENVAT account which should be posted on creation of excise document.
    B) Under which Excise Group and Series Group the Excise Invoice should be created.
    In your case to create automatic Excise Invoice you need to maintain separate Excise Group and Series Group, as for Export we also need to maintain separate no. range (not necessarily) and normally we also have different Billing Type.
    So do the separate setting and then try to create automatic Excise Invoice.
    Regards
    Amitesh

  • Excise invoice without GR reverse

    Dear All,
    I have one problem that i have posted excise invoice with wrong value.
    Now, i want to cancel this excise invoice without reverse GR reverse.
    I know that for this scenario we do reverse GR in MIGO then cancel excise invoice in J1IEX.
    But in our company we can't cancel GR because batch no. generated and we don't want to regenerate the batch no.
    Thanks,
    Sandip

    Hi,
    GO to J1IH then click on other adjustment tab and follows as below.
    Document Number: Enter the material document no
    Document Year:  2010
    Company Code: enter the company code
    Plant: enter plant
    Excise Group: Enter excise group
    Subtransaction Type: leave it blank
    Execute then enter the vendor invoice no and duties which you wish to deduct as
    Hope this helps you

  • SD - Excise Invoice creation and Excise Invoice cancel

    Hi SD Gurus,
    My requirement is to create a automatic excise invoice while creating a sales Invoice....
    I have few questions?
    1.What are the settings required for automatic creation of Excise Invoice?
    2. Currently iam following the below flow :
    VA01(OR) -
    >VL01N(LF)  -
    > VF01(F2) -
    > J1IIN(JEX)...Are  there any problems if i follow this flow?
    3. How should i cancel the Outgoing Excise?Whats the flow and Tcodes for the same?
    Your expertise and suggestions will be very useful .....
    Thanks
    Sasi

    Dear Sasi
    To cancel Excise Invoice
    1)  TCode -  *J1IH*
    2)  Go to IMG Path -- Logistics-General --> Tax on Goods Movements --> India --> Account Determination --> Specify G/L Accounts per Excise Transaction.
    Here you have to define the Excise Transaction type CEIV for the combination of your Excise Group, Company Code and respective G/L Account.
    thanks
    G. Lakshmipathi

  • Excise invoice without po

    hi
      i am capturing and posting the excise invoice without po in that system is not updating part 2 register i.e in j2i6- rg23apart2, while part1 is updating.mvt type-501
                                                                         thks.

    hi,
    Please take CENVAT with J1IH T-Code.
    Hope It's useful
    Shyam Kogta

  • Creation of excise invoice at depot with A-certificate

    Dear Friends,
    I have a scenario with one of my customers where they transfer stock from plant to depot and sell those from there. In one instance, it was discovered that by mistake proforma invoice at the plant was prepared with wrong base price and therefore less excise values flowed into the outgoing excise invoice. To take care of this an excise JV was passed from the plant. Thereafter, an A-certificate was created w.r.t the outgoing plant invoice to capture the excess excise values. Simultaneously, a debit memo request was created for the plant followed by a debit memo to balance amount. The RG1, RG23A partII registers were then updated. Now, while selling from the depot, when excise invoice is being assigned to the delivery, I am not able to find the plant excise invoice which is needed to be assigned. Only, the A-certificate is seen. I have tried to change selection criteria also but still unable to find the particular incoming invoice in the list. Therefore, I am not able to create the depot excise invoice.
    My queries are as follows:
    1. Whether the process of adjusting the excise difference through JV is OK. Or I need to create a supplementary invoice through J1IS with reference document type OTHR?
    2. How to update RG1 register for the differential value or the RG23A only shall be updated instead of RG1 after the Jv is passed?
    3. I am not able to assign the incoming excise invoice and the A-certificate together to the outbound delivery at depot.
    I shall be obliged if any of you suggest me a solution from your experience as many of you might have come accross similar scenarios while working on CIN.
    Awaiting a reply and wishing everybody a very Happy New Year in advance.
    Regards.

    Dear Lakshmipathi,
    Thanks for the prompt response and suggestion. I believe I have not been able to clarify my requirement. I understand that at depot level RG23D only should be updated and RG1 or RG23A has got no relevance. My query is, when the goods are being sent from plant to depot, RG1 register is updated which will capture the excise values in the outgoing excise invoice. Now later on when I find that I have sent goods at wrong price(ie charged less excise duties), I need to generate a supplementary invoice and issue a debit memo to the depot to balance my revenue accounts. Now, in this case , how I shall post the differential amount to the registers at plant level and during utilization how the set off will take place between sales and procurement?
    As regards the A-certificate part I have understood the entire process and have completed the same.
    Also I need your inputs in the following scenario:
    Incase If I have charged more excise to the customer  during sale from factory, how the same amount will be adjusted in the registers.
    Process Flow: Factory Sales
    VA01 u2013 Create Order                                    - 10 Pc
    VL01N u2013 Create Delivery & PGI                 - 10 Pc
    VF01 u2013 Create Commercial Invoice             - BED- 1000 , ECS u2013 20 , SheCess - 10
    J1IIN u2013 Create Outgoing excise invoice      - BED- 1000 , ECS u2013 20 , SheCess - 10
    J1I5-Update RG1 register
    J2I5-Extract RG1 register
    J2I6- Print RG1 Register
    We realized that we have charged more price as a result even excise is charged more to the Customer.
    So the steps that we are thinking are as follows:
    Actual Excise values should have been BED- 800 , ECS u2013 16 , SheCess - 8
    1)Create Credit Memo
    2)Create Excise JV through J1IH ( Additional Excise ) - Excise Amount : BED- 200 , ECS u2013 4 , SheCess - 2
    My present RG23A balance of Purchases is BED-2000 , ECS u2013 40 , SheCess - 20
    Now our question is when we are creating Excise JV through J1IH ( Additional Excise ), RG23A Register is getting updated and additional values getting added.
    So now my RG23A balance of Purchases is BED-1800 , ECS u2013 36 , SheCess - 18
    So in Utilization i.e. in T-Code : J2IUN, Available Balances are decreased. But Outgoing excise values to be sett off are not getting affected anyways.
    This means that my excise values of Purchases i.e. RG23A Part 2 are getting decreased and Excise values during sales are not getting affected which we feel is not correct.
    Please give your valuable inputs and also let me know if I am following the correct Process as many suggest to use J1IS T- Code for Adustments.

  • How to control the alternative payee from invoice postings

    hi,
    i have a requirement, we are useing the alternative payee for vandor payment, my client want to post only payments through alternative payee. some times by mistake users posted  invoices to alternative payee account. so here after i want to control the alternative payee from invoice postings. how to do the configuration.
    rgds
    gopal

    If I understand your question correctly, you are trying to prevent accidental invoice posting to altenative payee vendor instead of real vendor.
    If this is right, then block the alternate payee vendor in company code. Maintain Altenate payee in general data > Payment transactions data.
    Hope this helps.
    Regards
    Subodh

  • FBE1 Advise creation with Excise Invoice number

    Hi SAP,
    Is it possible to create a advice in FBE1 with the help of Customer Excise Invoice number???
    I know its possible with help of accounting document number but my client want to create with the help of Excise invoice number.
    In FBE1 if i enter accounting document number and press open item gross amt tab then system automatically give the amount. but the same way i want with the help of excise invoice number.
    How to do?? is it any User Exsit availabe or any note need to apply??
    Its very useful requirment in SAP if we found the solution.
    Good Day!
    Regards,

    Hi SAP,
    Is it possible to create a advice in FBE1 with the help of Customer Excise Invoice number???
    I know its possible with help of accounting document number but my client want to create with the help of Excise invoice number.
    In FBE1 if i enter accounting document number and press open item gross amt tab then system automatically give the amount. but the same way i want with the help of excise invoice number.
    How to do?? is it any User Exsit availabe or any note need to apply??
    Its very useful requirment in SAP if we found the solution.
    Good Day!
    Regards,

Maybe you are looking for