Controle questions forgot

I need to know how i can find the answer on my control questions ? Anyone ?

I assume you mean your apple ID security questions, correct?
First, did you have a recover/rescue email set up? If so, go to appleid.apple.com on a computer or mac and sign in and go to security and passwords... from there you can have your security questions reset... if you didn't have a rescue/recovery email set up then you'll need to contact apple support to have them reset. They will transfer you to account security where they will verify some info and help you... good luck!

Similar Messages

  • I forgot answers from a control question, what do I do?

    I forgot answers from a control question, what do I do?

    Reset Your Security Questions: http://support.apple.com/kb/ht5312
    Navigate to My Apple ID using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so.

  • I forgot answer for control questions!!!

    Help me please!!! I forgot answers for control questions for my Apple ID
    <E-mail Edited by Host>

    Hello, Albert. 
    If you need to reset your security questions and have a rescue email attached to your Apple ID, this article will help you with this issue.
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    If you are still unable to reset your security questions or do not have a rescue email associated with your account, you will need to contact iTunes Store support.
    Cheers,
    Jason H.

  • Hi please help me I'm appleid disable 7.0.4 iPhone 5s by email and security questions forgot not active now please please help me

    Hi please help me I'm appleid disable 7.0.4 iPhone 5s by email and security questions forgot not active now please please help me

    You might be able to re-enable your account via this page : http://appleid.apple.com, then 'reset your password'
    You might then need to log out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it
    For your security questions, if you don't have a rescue email address, or you don't have access to the email account, then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699 - you can also try this link to get your account re-enabled if the above doesn't work.
    When they've been reset you can then use the steps half-way down this page to update/add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

    I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

    The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • What have I do if I forgot answers to control questions?

    I forgot control questions

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - see if this user tip helps : https://discussions.apple.com/docs/DOC-4551
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • File Path Control question

    Simple question: How do I invoke the Open command in the File Path control? My reason is of my user hasn't supplied a file, then I want to force the user to select one.
    Solved!
    Go to Solution.

    Most file related vi should prompt if there is no file path. If for some reason you are not getting that you could check to see if the file path is empty and add a prompt see below:
    Tim
    Johnson Controls
    Holland Michigan

  • Fan control questions

    Hi
    I have a mid 2008 2.8Ghz iMac with the stock 320 Gb HD and 4 Gb ram. It runs fine but I am worried about how hot the case gets at times, in particular the top left corner. I have iStat widget installed too which shows what I think are reasonable temps most of the time, but sometimes even after just everyday use (browsing etc...) some of the temps seem high (power supply is presently at 75c). The fan speeds don't seem to increase much at all from the factory minimums. I know about smc fan control and iMac fan control, but I have a couple of questions before I decide to use them.
    1. Do you think I need to be worried about this?
    2. What damage could I cause by running the fans harder?
    3. If I use these utilities to push the fans harder than Apple recommends, will I void my Apple Care?
    Looking forward to your answers
    Paul

    An utility like smcFanControl only changes the minimum fan speed setting. You are still running the fans well below its maximum capability. So the change is to the low end of the speed range, not the high end. You CAN set it high enough so that the minimum fan speed sounds like a small vacuum cleaner, but I would not set it that way for any length of time. I just tried it once to see what it sounded like with the fans running at a high speed (never heard them before). There is a max possible setting, so you can't set it to a crazy high number.
    I use smcFanControl and have the fans set about 25% higher than the default speed. I still can't even hear them at that setting, so I figured I wasn't doing any harm and it may help my iMac run cooler (not that noticed any issues with heat).
    I can't see how it would void AppleCare. Unless you set it to sound like a vacuum cleaner all the time (which would be really annoying), you are running the fans well within their normal operating range.
    Note: The adjusted minimum fan speed is only in effect while smcFanControl is running in the background. It does not change any system or hardware settings. To go back to the default settings, just quit smcFanControl.

  • I have a few trivial Labview Control questions

    1.
    I'm trying to customize the look of a boolean switch control with the CTL Editor, but I cannot seem to "Import picture" with transparent color information. the original switch has transparent colors, but the clipboard either doesnt store the transparency, or Labview only recognizes one particular color as transparent. How do I do this? (actually trying to make a circuit-diagram-looking switch, if one exists, I wont need to do the above)
    2.
    I have a "vertical pointer slide" with 7 pointers, and I'm using "fill to value below" with different colors between each slide. Whenever sliders are at the same value, the fill color of an incorrect slider shows, rather than the slider immediately following. How do I
    fix this behavior?
    Attachments:
    switch.ctl ‏20 KB
    slider.ctl ‏320 KB

    Hi,
    -For question number 1, please refer to the following link
    http://digital.ni.com/public.nsf/3efedde4322fef198​62567740067f3cc/e99c7bd3da4622158625635a00770210?O​penDocument
    -For question number 2, I would try to play around with property nodes of a slider control such as ACtive Sliders, Fill Color and the array of references DigitalDisplay[] and develop some logic between the filling colors and the values of each sliders.
    Cyril
    Cyril Bouton
    Active LabVIEW Developper

  • Development backup and version control questions

    Two question I want to ask as an Oracle XE beginner:
    1.How to backup my work (database objects and application pages) each day?
    2.What is the best practice for version control for the Oracle XE development projects? Does anyone use CVS?
    Thank you.

    Two question I want to ask as an Oracle XE beginner:
    1.How to backup my work (database objects and
    application pages) each day?Take a look at the backup script in the product directory.
    C.

  • Command-line type itunes control - questions

    Hello,
    I'm writing a little tool with Applescript to control iTunes via command-line type interface. I have few general questions, thanks in advance for any answers. First I'll explain my idea, questions at the end. (If wrong forum, please tell me where to go)
    The goal: to control music with as less hassle as possible. I listen music all day, have dozens of gigabites of it, and find mouse/iTunes interface too troublesome. Moodkiller whilst reading a book, for example.
    Tool is pop-up dialog, with a single text field. Write something and hit enter -> search phrase or command interpreted and sent to iTunes as Applescript -> iTunes acts, and a new dialog pops up, ready for next command. (Enter with no text quits app)
    Examples:
    "oasis wonderwall"
    Searches iTunes library and finds Wonderwall of Oasis. Displays a pop-up list of search matches, in this case just one song. Hit enter -> iTunes plays it. (If more results, I get to choose song from list.)
    I find this quicker than to activate iTunes search box with mouse, enter search string, activate results pane with several TAB:s etc...
    "trip-hop"
    Searches an iTunes library, finding over two hundred "trip-hop" genre songs. This time just plays random song among results (thumb rule: if number of results > 100, behave that way, otherwise as above). Library continues playing from that point. Usually means you get to hear a lot of trip-hop. (could also make new trip-hop playlist)
    ">"
    Command: skip to next song. ">>>" skips 3 songs at once, ">>>>" four songs etc
    "<"+" increases three notches, "++" four etc.
    Decrease volume, again "---" three notches etc.
    "play", "pause", "stop"
    Basic player commands, you name it.
    "oasis wonderw >"
    Searches song and adds it to end of current playlist (if more than one result, choose from list).
    Other ideas too, but you propably got the point.
    My questions:
    1) Any applications currently doing this kind of job? With iTunes or other music players? (You can use Quicksilver for iTunes song searching, but I'm not certain if that's very handy or fast)
    2) Would you use this kind of tool, if it were good? (just a theoretical question) If yes, how would you like to control it?
    3) I have used Applescript's basic "display dialog" and "choose from list" commands, but would love more customized pop-ups (fancier song lists etc). Pointers to good scripting additions to accomplish this? Currently the entire tool is made with Applescript.
    If this raises interest, I could post the tool somewhere. It's still very early draft, anyway.
    Cheers,
    O
    Helsinki

    Hi CofeeBreak,
    Thank you for your comment, but I was able to find the problem (didn't solve it yet): In the FM command line interface, calling a HEX file located in a folder with brackets in its name, such as "C:\hello_World(V1)\LabVIEW.hex" will not be recognized by the FM.exe, whereas "C:\hello_World_V1\LabVIEW.hex" will work just fine. In the Flash Magic GUI and Command Line Manual section on hex files there is no mention of that, my solution at the moment is to remove the brackets from folder names.
    Thanks
    Amir

  • Parent control question

    On iMac, when enable parent control with selected web sites, and when using safari to open selected web site, parent control window continue to pop up asking for accessing  additional web site such as google-analytics.com, doubleclick.com, etc, i need either select the web site(need admin privilege) or click OK whcih basically ignore the pop up window. This is very annoying. How can I keep this parent control window from popping up ? I want to ignore all the question silently.

    Download and install Ghostery:
    http://www.ghostery.com/

  • Control question

    We are developing an app whereby we need to expose some database queries to the
    front end developers. For example, say there is a Product table. We want to create
    general Product queries such "getProductByName", "getProductPrice", etc and provide
    these queries to the front end. The approach I am taking is to expose all these
    functions in a control (ProductControl). ProductControl at this point is talking
    to ProductDAO which in turn is interacting with the db and making queries.
    There is talk in the company of using LiquidData (LD) in the near future. Since
    LiquidData comes with it's own LiquidData control which will expose similar methods
    once the datasources are mapped using the control, I dont want the developers
    using ProductControl to have to change their code, and so in my opinion, I should
    be able to throw away ProductDAO and plugin the LiquidData control and everything
    should be fine.
    My questions are :
    - Is this assumption correct ? Is this a sound architectural design or should
    I be aware of some issues with LD ?
    - Should my ProductControl be calling ProductDAO (plain java dao class) or should
    I make ProductDAO a control as well ? Is there a benefit to be gained by making
    the DAO a control ?
    Thanks,
    SC

    SC,
    I'm not all that familiar with LD, but the design approach looks correct to me.
    ProductControl should provide a consistent interface such that other tiers of
    the application can be sheilded from changes to the data access mechanism. As
    for ProductDAO, I would use a database control unless there is a reason not to.
    It should provide the capabilities you need without having to write and maintain
    the database interaction logic. It also provides automatic mapping of results to
    domain objects, so you don't have to write all that code either.
    Regards,
    DC
    SC wrote:
    We are developing an app whereby we need to expose some database queries to the
    front end developers. For example, say there is a Product table. We want to create
    general Product queries such "getProductByName", "getProductPrice", etc and provide
    these queries to the front end. The approach I am taking is to expose all these
    functions in a control (ProductControl). ProductControl at this point is talking
    to ProductDAO which in turn is interacting with the db and making queries.
    There is talk in the company of using LiquidData (LD) in the near future. Since
    LiquidData comes with it's own LiquidData control which will expose similar methods
    once the datasources are mapped using the control, I dont want the developers
    using ProductControl to have to change their code, and so in my opinion, I should
    be able to throw away ProductDAO and plugin the LiquidData control and everything
    should be fine.
    My questions are :
    - Is this assumption correct ? Is this a sound architectural design or should
    I be aware of some issues with LD ?
    - Should my ProductControl be calling ProductDAO (plain java dao class) or should
    I make ProductDAO a control as well ? Is there a benefit to be gained by making
    the DAO a control ?
    Thanks,
    SC

  • Which forum for EM 10g Db Control questions?

    It seems as if Enterprise Manager 10g is getting more popular. I see more and more threads in Database forums about the web-based OEM... while there is a dedicated EM category and forum (but forum name includes Grid Control).
    Where should discussion or questions threads about Database Control be posted? Does Oracle have an idea about this?
    Considering that Database Control is a single-database, cut-down version of Grid Control, should we try to focus the Enterprise Manager?
    Database - General forum might be the logical place to post. After all, somebody new to Oracle "just" installs Database and problems with "web page"/EM is probably seen as problems with the database.
    Both forums lacks a description (as seen on main forum page, Category pages or forum listing).
    Could the use of the forums be made any clearer?

    Hej Fredrik
    I agree that we should have a dedicated section for all the EM questions in the Grid area of this forum in order to separate all the other grid requests.
    you got my vote also on that post.

  • Creative Cloud question [forgot password]

    Question by Adobe Creative Cloud. So, I'm already on this computer for a long time to check in with one mailbox, and now I need to change it, because I forgot my password from the mailbox that I worked with. How to change the mailbox in Creative Cloud?

    Some Change/Verify Account links https://forums.adobe.com/thread/1465499 that may help
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    -email address https://forums.adobe.com/thread/1446019

Maybe you are looking for

  • IF Statement Peformance Question

    I have an abap program that performs 20% better with a simple change in the structure of the if statement.  Anyone got any explaination why this would be so?  I would really appreciate any insight into this. This code: IF sy-tcode IN r_order_tcodes.

  • Webservice - XI - Mail Adapter

    Hi Experts, Is it possible to do Webservice -> XI -> Mail (Synchronous) scenario thro' XI? Regards Sara

  • Changing mm/dd/yyyy hh:mm:ss to mm/dd/yyyy in OBIEE

    Hi Guys, I have a filter that is in DateTime format(mm/dd/yyyy hh:mm:ss) in Answers but its hard to use because the filter is so specific(up to seconds) so I want to change it in Date format(mm/dd/yyyy). I've already tried to change its Datatype in t

  • Working with the line item table in CAF application service

    Hello SDNs, I am trying to retrive a value from the Nested list of one of my application service. for example,  suppose i have 2 operations in a application service, 1, calls the BAPI_PO_GETDETAIL1 based on the PO number given it returns the POItem,

  • Irregularly Shaped Windows

    Many applications use windows that are not perfect rectangles. For example, Windows Media Player has several "skins" that can make it circular, square, or whatever, some popups look like oval speech bubbles, etc. How can I create an irregularly shape