Controller for View, Window, Interface, and Configuration Cannot Be Created
Hi All,
In our Web Dynpro ABAP applicaton we have a window and when we edit the conent of window and try to press "Cancel" button we are getting below error.
Controller for View, Window, Interface, and Configuration Cannot Be Created
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_CONTROLLER of program CL_WDR_COMPONENT==============CP
Method: GET_ACTION_FROM_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================
Do any one have idea regarding this error.
Regards
CB
Hi,
Sounds bit strange to me, if you edit your window and do not want to save your changes then i would not expect this error. assuming that the component does not have activation problem.
Just for making sure.
I assume that your problem is on design time and not runtime.
If it is a design time and problem still exists, try to delete this window, save ,activate and then recreate this window,embed your view(s).
If it is runtime problem then i would suggest you to do debugging and find out where it is getting this error.
Similar Messages
-
Dlv. type (dlv. catgry for mat. 1133 and BWART ) cannot be determined
Hi,
Am getting the error while doing the transaction me2o the error is like this"Dlv. type (dlv. catgry for mat. 1133 and BWART ) cannot be determined"
Message no. VL295
please help me on thisas per the error it seems that system is not able to find the relevant delivery item category for the document type of delivery
Please check the configuration for it. GO to IMG>LE>Shipping> -
My iPod is locked for 22 Million minutes and i cannot use recovery mode because my home button is broken and the screen doesn't respond to any touches or swipes. What should i do?
Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too -
I am trying to buy Ai. My 30 day trial is up. It is asking for a serial number and I cannot find an e-mail with the number. What shall I do?
Please refer below link :
Creative Cloud pricing and membership plans | Adobe Creative Cloud -
External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.
Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
Does the drive now appear in finder..
If not reboot both drive and the AE.. it should now appear.
If it doesn't work with direct connection try a powered hub.. that can help. -
I partitioned a small drive for a windows program, and now the computer only wants to boot to Windows. How do I get back to Mac so I can have a choice of drives?
That doesn't sound good. It sounds like the power outage might have corrupted the partition for OS X. I would suggest booting from the Install DVD that came with your Mac while holding down the C key. Once you have selected the language start up Disk Utility from the pull down menu and repair the disk. Once you have done that then repair permissions also.
Allan -
I have Adobe Acrobat 8 Standard and I had to reload it on my computer due to my hard drive crashing. Now I can only open and view PDF’s and I cannot edit them as I could before such as using Tools>Comment&Markup or Tools>Advanced Editing>TouchUp Text Tool. All the functions are greyed out. Please advise.
What's your OS? Acrobat 8 is not compatible with any modern OS.
On Thu, Jan 15, 2015 at 4:16 PM, thomasc1234 <[email protected]> -
When we go for view ,fm,infosetquery,and tables
Hi Masters,
1)when we go for view ,fm,infosetquery,and tables ?
& how to create view ,fm,infosetquery,and tables ?
2)what is user of numeric pointer?
3)what is different between view ,fm,infosetquery,and tables ?
4) what is user of view ,fm,infosetquery,and tables ?
please help on this issue by give good understading answerHi Kumar,
1. Maintaining Generic DataSources.
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
Create View:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Create FM:
http://help.sap.com/saphelp_nw04s/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/frameset.htm
Create Table:
http://help.sap.com/saphelp_nw04/helpdata/en/87/773a55f35a65409009e87261c84eb2/frameset.htm
Create Infoset query:
How to create infoset query
what is an infoset and infoset query?
Create Generic Delta:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
2. Numeric pointer:
Generic Delta with Numeric pointer.
Generic Delta Extraction
Delta specific fields
You can have the differences and the uses of View, FM, Infoset query and table from above links itself.
Hope these helps u...
Regards,
KK. -
I have downloaded After Effects via the creative cloud, however it still asks me for a serial number, and I cannot log in to the licencing site.
Please helpJodie84,
I have just checked your account and found that you indeed have bought a Creative Cloud for Teams subscription but you have assigned the single seat to another user hence you ( If you are using your own Adobe ID ) are getting the trial error message.
Two options : Either reassign the seat to your self or add an additional seat and invite your self in the same Team.
Cheers,
Kartikay Sharma -
I am trying to startup InDesign but a window opens and reads, cannot load BNCORE.RPLN plugin. It requires 10.2 version of Indesign. Need compatible version of BNCORE.RPLN. What do I do at this point
reinstall ID. The update was not successful.
-
Transaction code for viewing invoice document and Claims document
Hi Experts,
Can u please tell me the transaction codes for viewing invoice document and claims document in ECC.
I am in CRM and i do not know about the ECC transaction codes.
request you 2 help.
Thanks and Regards
Shilpihi,
MM flow:
purchase Requestion (ME51)
Request for Quatation (ME41)
Quatation from different vendors (ME47)
price comparision (ME49)
purchase order send to vendors (ME22)
goods reciepts (MIGO)
logistic invoice verification (MIRO)
SD flow:
Enquirey (VA11)
Quatation (VA21)
sales order processing (VA01)
delivery (VL01)
billing (VF01)
Also follow this link.
The specified item was not found.
i hope this will help you out
-Thanks & regards
Saurabh Goel -
I have a touchsmart running windows 7 and i cannot get my screen saver to work
i have a touchsmart running windows 7 and i cannot get my screen saver to work
Hello. You need to change the energy use setting that computer uses max it out. Then it will work just fine. My is touchsmart 600-1050. The computer was preset to use minimum amount of electricity when in idle. I changed all the setting to high. Now every thing runs just like a Windows XP version computer. Thats how I got my screen savors to work. I also upgraded my Windows 7 to Windows 7 Ultimate now I am able to run a lot more XP software. Test your pond screen saver make sure that working with windows open. That will tell you if it is a software issue if it doesn't work. That is the case then restore it from your D: drive.
-
How to verify if Database gateway for DRDA is installed and configured.
Hi All,
How can we verify if Database gateway for DRDA is installed and configured.
Our OS is AIX 5L 64 bit OS.
Rdbms : 11.2.0.3
Regards,Duplicated
How to verify if Database gateway for DRDA is installed and configured.
+-- thread locked --+
Nicolas. -
Revision: 17872
Revision: 17872
Author: [email protected]
Date: 2010-09-27 08:04:40 -0700 (Mon, 27 Sep 2010)
Log Message:
Popup: Exposed set accessor of open for view state usage and fixed bug when closing from model within popup. http://www.spicefactory.org/forum/viewtopic.php?p=3932. Added new sample to show model and view state interactions.
Modified Paths:
cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpBase.as
cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpFactory.as
cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpWrapper.as
cairngorm3/trunk/libraries/PopupTest/.actionScriptProperties
cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopup.mxml
cairngorm3/trunk/libraries/PopupTest/src/samples/PopUpPM.as
Added Paths:
cairngorm3/trunk/libraries/PopupTest/src/PopUpModelExample.mxml
cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopupWithModel.mxmlLots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh. -
When I try to remember passwords the setting for it is faded and I cannot check it.
When I go into Options then Security, the Remember Passwords is faded and I cannot select it. I need this, I have to sign in to my homepage every time, and it shows that it is a saved password. I am new to Firefox and need help.
Application Basics
Name: Firefox
Version: 30.0
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:30.0) Gecko/20100101 Firefox/30.0
Crash Reports for the Last 3 Days
All Crash Reports (including 60 pending crashes in the given time range)
Extensions
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.places.smartBookmarksVersion: 7
browser.privatebrowsing.autostart: true
browser.sessionstore.upgradeBackup.latestBuildID: 20140605174243
browser.startup.homepage: http://xfinity.comcast.net/home/x/?cid=mtmh10212014
browser.startup.homepage_override.buildID: 20140605174243
browser.startup.homepage_override.mstone: 30.0
browser.urlbar.default.behavior: 2
dom.mozApps.used: true
extensions.lastAppVersion: 30.0
gfx.direct3d.last_used_feature_level_idx: 1
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1414127486
places.history.expiration.transient_current_max_pages: 102097
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
print.printer_HP_Officejet_4630_series_(Network).print_bgcolor: false
print.printer_HP_Officejet_4630_series_(Network).print_bgimages: false
print.printer_HP_Officejet_4630_series_(Network).print_colorspace:
print.printer_HP_Officejet_4630_series_(Network).print_command:
print.printer_HP_Officejet_4630_series_(Network).print_downloadfonts: false
print.printer_HP_Officejet_4630_series_(Network).print_duplex: -2129785343
print.printer_HP_Officejet_4630_series_(Network).print_edge_bottom: 0
print.printer_HP_Officejet_4630_series_(Network).print_edge_left: 0
print.printer_HP_Officejet_4630_series_(Network).print_edge_right: 0
print.printer_HP_Officejet_4630_series_(Network).print_edge_top: 0
print.printer_HP_Officejet_4630_series_(Network).print_evenpages: true
print.printer_HP_Officejet_4630_series_(Network).print_footercenter:
print.printer_HP_Officejet_4630_series_(Network).print_footerleft: &PT
print.printer_HP_Officejet_4630_series_(Network).print_footerright: &D
print.printer_HP_Officejet_4630_series_(Network).print_headercenter:
print.printer_HP_Officejet_4630_series_(Network).print_headerleft: &T
print.printer_HP_Officejet_4630_series_(Network).print_headerright: &U
print.printer_HP_Officejet_4630_series_(Network).print_in_color: true
print.printer_HP_Officejet_4630_series_(Network).print_margin_bottom: 0.5
print.printer_HP_Officejet_4630_series_(Network).print_margin_left: 0.5
print.printer_HP_Officejet_4630_series_(Network).print_margin_right: 0.5
print.printer_HP_Officejet_4630_series_(Network).print_margin_top: 0.5
print.printer_HP_Officejet_4630_series_(Network).print_oddpages: true
print.printer_HP_Officejet_4630_series_(Network).print_orientation: 0
print.printer_HP_Officejet_4630_series_(Network).print_page_delay: 50
print.printer_HP_Officejet_4630_series_(Network).print_paper_data: 1
print.printer_HP_Officejet_4630_series_(Network).print_paper_height: 11.00
print.printer_HP_Officejet_4630_series_(Network).print_paper_name:
print.printer_HP_Officejet_4630_series_(Network).print_paper_size_type: 0
print.printer_HP_Officejet_4630_series_(Network).print_paper_size_unit: 0
print.printer_HP_Officejet_4630_series_(Network).print_paper_width: 8.50
print.printer_HP_Officejet_4630_series_(Network).print_plex_name:
print.printer_HP_Officejet_4630_series_(Network).print_resolution: 1149309452
print.printer_HP_Officejet_4630_series_(Network).print_resolution_name:
print.printer_HP_Officejet_4630_series_(Network).print_reversed: false
print.printer_HP_Officejet_4630_series_(Network).print_scaling: 1.00
print.printer_HP_Officejet_4630_series_(Network).print_shrink_to_fit: true
print.printer_HP_Officejet_4630_series_(Network).print_to_file: false
print.printer_HP_Officejet_4630_series_(Network).print_unwriteable_margin_bottom: 0
print.printer_HP_Officejet_4630_series_(Network).print_unwriteable_margin_left: 0
print.printer_HP_Officejet_4630_series_(Network).print_unwriteable_margin_right: 0
print.printer_HP_Officejet_4630_series_(Network).print_unwriteable_margin_top: 0
privacy.sanitize.migrateFx3Prefs: true
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1413611062
Graphics
Adapter Description: Intel(R) HD Graphics
Adapter Drivers: igdumd64 igd10umd64 igdumdx32 igd10umd32
Adapter RAM: Unknown
Device ID: 0x0046
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16571)
Driver Date: 3-25-2011
Driver Version: 8.15.10.2342
GPU #2 Active: false
GPU Accelerated Windows: 2/2 Direct3D 10
Vendor ID: 0x8086
WebGL Renderer: Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: false
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.6
Version in use: 4.10.6
NSS
Expected minimum version: 3.16 Basic ECC
Version in use: 3.16 Basic ECC
NSSSMIME
Expected minimum version: 3.16 Basic ECC
Version in use: 3.16 Basic ECC
NSSSSL
Expected minimum version: 3.16 Basic ECC
Version in use: 3.16 Basic ECC
NSSUTIL
Expected minimum version: 3.16
Version in use: 3.16hello, firefox won't save your passwords when you've set it up to run in permanent private browsing mode ("never remember history" in the options > privacy panel).
[[Settings for privacy, browsing history and do-not-track]]
Maybe you are looking for
-
[Weird Error!!] Insufficent space in working directory when create db clone
Hi guys, I met a problem when creating Oracle database clone by EM 10.2.0.3 TC9 Target Oracle Database is 10.2.0.2 version and on RH Linux Enterprise Server 3.0 I selected right host to clone, and gave username/password, and working directory. When p
-
How do I make JDeveloper open a new tab instead of a new window?
I am experiencing an annoyance where my JDeveloper opens a new Internet Explorer window every time I execute the program. I would much prefer that is opens a new tab in the window that I currently have open instead. If anyone has any idea how to fix
-
I am importing images into Flash only to discover that the images (1280 x 720) are not centered on the stage. Most of the time the images are off centre by a few pixel widths or in some cases by an inch or more. I can't get them to centre unless I
-
I need a Random generation of password with the following conditions
***Random Password Generation Program*** Also the password should be stored in the LDAP with SHA format. The status should be changed to unlock, the password expired column should be updated, so that the user should change the password when he login
-
LOADLIN.DNX Error downloading file
Hi, this weekend we've implemented a Juniper IDP in our network. As a result we have a problem with our ZEN7 Imaging Server. When we boot from PXE it starts downloading the files linux and initrd. We have no problem with the linux-file, but when he t