Convert character sets for one or more characters

Hello,
Issue:
Source File: Test.csv
Source file dropped on application server as csv file via FTP
Total records in csv file 102396
while loading into PSA I can able to load only 38,000 records after that I am getting error message " convert character sets for one or more characters" .
If i load same csv file from local workstation I am not getting any error message I can able to load total 102396 records.
Anybody have faced this kind of problem please share with me I will assign full points
Thanks

Hi,
check
Flatfile Issue
Regards,
Arek

Similar Messages

Cannot convert character sets for one or more characters

Hello,
Issue:
Source File: Test.csv
Source file dropped on application server as csv file via FTP
Total records in csv file 102396
I can able to load only 38,000 records after that I am getting error message " convert character sets for one or more characters" while loading into PSA .
If i load same csv file from local workstation I am not getting any error message I can able to load total 102396 records.
I am guessing while FTP the file into Application server some invalid codes adding?
But I am FTP 7 files, out of 7 I am unable to load only 1 file.
Anybody have faced this kind of problem please share with me I will assign full points
Thanks

I checked lower case option for all IO
When i checked the PSA failed log no of records processed is "0 of 0" my question is with out processing single record system is througing this error message.
When i use same file loading from local workstation no error message
I am thinking when I FTP the file from AS/400 to BI Application Server(Linex) some invalid characters are adding but how can we track that invalid char?
Gurus please share your thoughts on this I will assign full points.
Thanks,

Cannot convert character sets for one or more characters Error message

Hello,
I am getting this error message "Cannot convert character sets for one or more characters" when i try to transfer the data from Application server file as CSV to PSA.
Using T-code AL11
Under SAP Directory I open my file I can able to see all contents of my file right?
But i can't able to see all my data because of this I am getting ths error message?
I am loading Master data attribute
Is there any limitation on record length?
Please share your thought..
Thansk

Which length should not exceed 60.
When i load the same file from local workstation I can able to load no error message
Why I am getting if i load same file from application server?
Thanks

Flat File Load Issue - Cannot convert character sets for one or more charac

We have recently upgraded our production BW system to SPS 17 (BW SP19)
and we have issues loading flat files (contain Chinese, Japanese and
Korean characters) which worked fine before the upgrade. The Asian
languages appear as invalid characters (garbled) as we can see in PSA. The Character Set
Settings was previously set as Default Setting and it worked fine until
the upgrade abd we referred to note 1130965 and with the code page 1100
the load went through (without the Cannot convert character sets for one or more characters error) however the Asian language characters will appear
as invalid characters. We tried all the code pages suggested in the note e.g.
4102, 4103 etc on the info packages but it did not work. Note that the
flat files are encoded in UTF-8.

I checked lower case option for all IO
When i checked the PSA failed log no of records processed is "0 of 0" my question is with out processing single record system is througing this error message.
When i use same file loading from local workstation no error message
I am thinking when I FTP the file from AS/400 to BI Application Server(Linex) some invalid characters are adding but how can we track that invalid char?
Gurus please share your thoughts on this I will assign full points.
Thanks,

How does one install non-English character sets for use with the "find" function in Acrabat Pro 11?

I have pdf files in European languages and want to be able to enter non-English characters in the "find" function. How does one install other character sets for use with Acrobat Pro XI?

Have you tried applying the update by going to Help>Updates within Photoshop Lightroom? The update should be using the same licensing? Did you perhaps customize the installation location? Finally which operating system are you using?

Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100

Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
Jukka

Hi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

Will print more than one copy when set for one copy,

prints whole page including the folder list on the left and the adverts on the rtght which overlap the email text,
also print multiple copies even when set for one copy

Hi there @HoundDog4
Welcome to the community
I will certainly do my best to help you with the printing issues you're facing! However, I am going to ask that you please let me know some more helpful information to help me research the problem for you.
Please respond to me with the following. If there are any steps here that you have not tried, please try them before responding and include the result:
What printer(s) are installed on the computer?
How is the printer connected (USB/ wireless/ wired/ Bluetooth)?
What is the Operating System of the computer?
Have you tested hardware functionality (made copies from the printers front panel)?
Have you tried printing from different programs?
Have you tried uninstalling and reinstalling the software?
If you're running Windows, run the Print and Scan Doctor and include the results.
Did you make any recent changes to your set up (physical move, upgrade, downgrade, new software installed, new router, etc)?
Is the printer plugged directly into the wall outlet (avoiding power bars and surge protectors)?
Have you completed all Windows/Mac OS Updates?
Have you tried using a different USB/Ethernet cable?
Thank you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

SSIS Error Text was truncated or one or more characters had no match in the target code page

I the same issue or something close.
Except I have one Field (27) that get a trunacation error
Error:
Data conversion failed. The data conversion for column "Column 27" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
The "output column "Column 27" (91)" failed because truncation occurred, and the truncation row disposition on "output column "Column 27" (91)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Data looks like:Red Text is the field that is throwing the error!
00000412,
0000000011411001,
0273508793,
01,
"RUTH           ",
"EDWARDS             ",
19500415,20080401,
"N",
04488013,
"1",
"F",
365094,
20080401,
000472162716,
"1447203880    ",
43995202341210,
00120.000,
0010,
00008.26,
00004.96,
000.00,
00002.70,
00007.66,
0,
"PROMETH/COD SYP 6.25-10 ",
"Y",
"Promethazine w/ Codeine Syrup 6.25-10 MG/5ML               ",
0000,
"001C",
610020,"WELLP1537",
"O",
"N",
00,
"D",
"S",
"G",
"ID01V012008782",
"TOM AHL CHRYSLER              ",
"M",
"M",
"PBD $20/10+40%/20%            ",
00008.26,
"1184641367"

I have found four things that I always check when I run into this problem. I have yet to find a time when one of these didn't work (specifically helps when reading data from flat files but I suppose most of the four would apply to any source). Check out my blog post, content repeated below:
1. Make sure to properly configure the "Flat File Source". When setting the connection properties to the flat file, take time to click on the advanced tab and ensure that the" Name", "DataType", and "OutputColumnWidth" properties are set properly. I have found that if this is setup correctly when the initial connection is created, some if not all of the data type issues and errors can be alleviated. The "Flat File Connection Manager Editor" can be accessed while initially creating the connection or by double clicking on a flat file connection within the "Connection Managers" for connections that have previously been created.
2. Depending on the order and steps that were used to create the connection to the flat file, sometimes the data types need to be updated in an additional area. This can be found by right clicking on the "Flat File Source" and selecting "Show Advanced Editor...". Once in the advanced editor, click on the "Input and Output Properties" tab. Expand the "External Columns" folder. For each field being loaded from the flat file there are some configurable properties. Make sure that the "DataType" field is properly set for each field.
3. Something else that can be done if you are sure that the data type is set correctly in both of the two previously mentioned locations is to set the "Flat File Source" to essentially ignore those annoying truncation errors. On the same "Input and Output Properties" tab, expand the "Output Columns" folder. For those fields listed, there is a "TruncationRowDisposition" property. By default this is set to "RD_FailComponent". This can be switched to "RD_IgnoreFailure" in order to allow the data to successfully pass through the "Flat File Source" even if SSIS believes that truncation is going to occur. Along with making this change, you can also check the "DataType" in the "Output Columns" as well.
Caution: If you do set the "Flat File Source" to "RD_IgnoreFailure" as mentioned above, always take time to review the data loaded in the target table to ensure that the integrity of the data was not jeopardized.
Note: I have found that when the "DataType" for both the "External Columns" and "Output Columns" is manually updated that it does not remain the same when the advanced editor is reopened. For this reason, try Steps 1 and 2 before setting the "Output Columns" manually.
4. The last thing to try, and this applies specifically to loading data from Excel files as opposed to text or CSV is to set the package to run in 32-bit mode. Click on "Project" on the top menu and select "Data Imports Properties...". Click on "Debugging" under the "Configuration Properties" and set the "Run64BitRuntime" to "False".
Working with data from flat files can sometimes be difficult in SSIS. By using one or many of the approaches I have listed above you should be able to create a repeatable process that is frequently needed within most SSIS packages. Be very careful when setting data types within SSIS and make sure to do it upfront when necessary because it can be harder to debug later in the development process. If the proper changes are made it should not be a surprise to feel a big SSIS developer sense of relief when the screen shows all green.
Let me know if this works!
Check out my blog!

Expdp with network_link and different character sets for source and target?

DB versions 10.2 and 10.1
Is there any limitation for implementing expdp with network_link but target and source have different character sets?
I tried with many combinations, but only had success when target and source have the same character sets. In other combinations there was invalid character set conversion (loose of some characters in VARCHAR2 and CLOB fields).
I didn't find anything on the internet, forums or Oracle documentation. There was only limitation for transportable tablespace mode export (Database Utilities).
Thanks

Hi DBA-One
This link
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_overview.htm#CEGFCFFI
is from Database Utilities 10g Release 2 (10.2) (I read it many times)
There is only one thing about different character sets.
I quote:
Data Pump supports character set conversion for both direct path and external tables. Most of the restrictions that exist for character set conversions in the original Import utility do not apply to Data Pump. The one case in which character set conversions are not supported under the Data Pump is when using transportable tablespaces.
Parameter VERSION also doesn't play role here, because the behaviour (character set) is the same if I use for target and source only 10.2 or (10.2 and 10.1) respectivly.

Lanovo ix4 300d and european character set for samba shares

Hi,
I am installing a couple of IX4-300d at a client site, struggling to set and fix the samba character set for the Windows shares. Here in Italy everyone is used to put western european characters into filenames (for example è ò ° €) but the NAS acts wierdly when it finds such caracters in folder names and file names.
As you know samba gives the possibility to declare dos charset= ISO8859-1 and unix charset= ISO8859-1 in the smb.conf file but the option is not present in the IX4 setup pages.
Is there an easy way to circumvent the problem and fix this option? As it is now the machine is fearly useless, at least if you need to migrate files and folder from a server or storage with ISO8859 charset already applied.
thanks a lot
np
Solved!
Go to Solution.

This issue has been raised on all iomega drives since day 1. although 'documented' it is still shame, that units sold to 'r-o-w' means rest-of-world, outside US, are stuckto Aa-Zz09 basically wheras client systems ( windows, linux, ios ) don't care and take what they are supposed to do.
Take it or leave it. ( I mean, take another vendor), I do not believe someone ever has taken that seriously or will do it......
Various PCs / Laptops ( sorry I still really love Dell and Fujitsu ;-))
Supporting Customers ix2s and ix4s -- Love Networking ( not only technically ).
I am not a Lenovo Employee.
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Error: ORA-16778: redo transport error for one or more databases.   please help.

Hello everyone :
I can't switchover to primary. following is error and information.
RHEL 6.3 x86-64
Oracle database 11.2.0.3.0 Enterprise edition
Primary database = orclprmy
Standby database = orclstby1
##### /etc/hosts on orclstby1
[root@orclstby1 admin]# cat /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.50.211    ttprmy
192.168.50.212    orclstby1
### DG broker error
DGMGRL for Linux: Version 11.2.0.3.0 - 64bit Production
Copyright (c) 2000, 2009, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
Connected.
DGMGRL> show configuration;
Configuration - TTDGConfig1
Protection Mode: MaxPerformance
Databases:
    orclstby1 - Primary database
      Error: ORA-16778: redo transport error for one or more databases
    orclprmy - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
DGMGRL>
########### listener.ora on orclstby1
[root@orclstby1 admin]# cat listener.ora
# listener.ora Network Configuration File: /u2/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = orclstby1)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME=orcl)
      (SID_NAME = orclstby1)
      (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
    (SID_DESC =
      (GLOBAL_DBNAME=orclstby1)
      (SID_NAME = orclstby1)
      (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
    (SID_DESC =
      (GLOBAL_DBNAME=orclstby1_DGMGRL)
      (SID_NAME = orclstby1)
      (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
ADR_BASE_LISTENER = /u2/oracle
############## tnsnames.ora on orclstby1
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl))
orclprmy =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy))
orclprmy_DGMGRL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy_DGMGRL))
orclstby1 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1))
orclstby1_DGMGRL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1_DGMGRL))
##### alert log on orclstby1.
Fatal NI connect error 12504, connecting to:
(DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=oracle)(HOST=orclstby1)(USER=oracle)))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.50.211)(PORT=1521)))
VERSION INFORMATION:
        TNS for Linux: Version 11.2.0.3.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
Time: 06-SEP-2013 13:19:55
Tracing not turned on.
Tns error struct:
    ns main err code: 12564
TNS-12564: TNS:connection refused
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
There is problem in alert log.
In the /etc/hosts file. The standby server (orclstby1) ip is 192.168.50.212. but alert log is 192.168.50.211.
Is any idea?
Thanks for help.
消息编辑者为：user4914135

#### on primary database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME            STATUS    TARGET ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1   VALID     LOCAL   ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclprmy
LOG_ARCHIVE_DEST_2   VALID     REMOTE LGWR       PENDING ALL_LOGFILES    PRIMARY_ROLE orclstby1
LOG_ARCHIVE_DEST_3   INACTIVE LOCAL   ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE
#### on standby database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME            STATUS    TARGET ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1   VALID     PRIMARY ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclstby1
LOG_ARCHIVE_DEST_2   ERROR     STANDBY LGWR       PENDING ONLINE_LOGFILE PRIMARY_ROLE orclprmy
ORA-12504: TNS:listener was not given the SERVICE_NAME in
CONNECT_DATA
LOG_ARCHIVE_DEST_3   INACTIVE PRIMARY ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE
#### log_archive_dest on primary database
SQL> show parameter log_archive_dest
NAME                                 TYPE        VALUE
log_archive_dest                     string
log_archive_dest_1                   string      location=/u3/arch/orcl vali
                                                 d_for=(ALL_LOGFILES,ALL_ROLES)
                                                  db_unique_name=orclprmy
log_archive_dest_10                  string
log_archive_dest_11                  string
log_archive_dest_12                  string
log_archive_dest_13                  string
log_archive_dest_14                  string
log_archive_dest_15                  string
log_archive_dest_16                  string
log_archive_dest_17                  string
log_archive_dest_18                  string
log_archive_dest_19                  string
log_archive_dest_2                   string      service="orclstby1", LGWR ASYNC
                                                 NOAFFIRM delay=0 optional comp
                                                 ression=disable max_failure=0
                                                 max_connections=1 reopen=300 d
                                                 b_unique_name="orclstby1" net_ti
                                                 meout=30, valid_for=(all_logfi
                                                 les,primary_role)
log_archive_dest_20                  string
log_archive_dest_21                  string
log_archive_dest_22                  string
#### log_archive_dest on standby database
SQL> show parameter log_archive_dest
NAME                                 TYPE        VALUE
log_archive_dest                     string
log_archive_dest_1                   string      location=/u3/arch/orclstby1 vali
                                                 d_for=(ALL_LOGFILES,ALL_ROLES)
                                                  db_unique_name=orclstby1
log_archive_dest_10                  string
log_archive_dest_11                  string
log_archive_dest_12                  string
log_archive_dest_13                  string
log_archive_dest_14                  string
log_archive_dest_15                  string
log_archive_dest_16                  string
log_archive_dest_17                  string
log_archive_dest_18                  string
log_archive_dest_19                  string
log_archive_dest_2                   string      service=orclprmy ASYNC valid_for
                                                 =(ONLINE_LOGFILE,PRIMARY_ROLE)
                                                  db_unique_name=orclprmy
log_archive_dest_20                  string
log_archive_dest_21                  string
log_archive_dest_22                  string
log_archive_dest_23                  string
log_archive_dest_24                  string
log_archive_dest_25                  string
#### spfile on standby database
</u2/oracle/product/11.2.0/dbhome_1/dbs> strings spfileorclstby1.ora
orcl.__db_cache_size=1040187392
orclstby1.__db_cache_size=1090519040
orcl.__java_pool_size=16777216
orclstby1.__java_pool_size=16777216
orcl.__large_pool_size=16777216
orclstby1.__large_pool_size=16777216
orcl.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orclstby1.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=536870912
orclstby1.__pga_aggregate_target=536870912
orcl.__sga_target=1610612736
orclstby1.__sga_target=161061273
orcl.__shared_io_pool_size=0
orclstby1.__shared_io_pool_size=0
orcl.__shared_pool_size=503316480
orclstby1.__shared_pool_size=469762048
orcl.__streams_pool_size=16777216
orclstby1.__streams_pool_size=0
*.archive_lag_target=0
*.audit_file_dest='/u2/oracle/admin/orclstby1/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u2/oracle/oradata/orclstby1/control01.ctl','/u2/oracle/fast_recovery_area/orclstby1/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_file_nam
e_convert='orcl','orclstby1'
*.db_name='orcl'
*.db_recovery_file_dest='/u2/oracle/fast_recovery_area'
*.db_recovery_file_dest_size=5218762752
*.db_unique_name='orclstby1'
*.deferred_segment_creation=FALSE
*.dg_broker_start=TRUE
*.diagnostic_dest='/u2/oracle'
*.fal_client='orclstby1'
*.fal_server='orclprmy'
*.log_archive_config='dg_config=(orclprmy,orclstby1)'
*.log_archive_dest_1='location=/u3/arch/orclstby1 valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstby1'
*.log_archive_dest_2='ser
vice=orclprmy ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orclprmy'
*.log_archive_dest_state_2='ENABLE'
orcl.log_archive_format='orcl_%t_%s_%r.arc'
*.log_archive_format='orclstby1_%t_%s_%r.arc'
orclstby1.log_archive_format='orclstby1_%t_%s_%r.arc'
*.log_archive_max_processes=4
*.log_archive_min_succeed_dest=1
orcl.log_archive_trace=0
orclstby1.log_archive_trace=0
*.log_file_name_convert='orcl','orclstby1'
*.open_cursors=300
*.pga_aggregate_target=536870912
*.processes=
1500
*.remote_login_passwordfile='EXCLUSIVE'
*.sessions=1655
*.sga_target=1610612736
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
</u2/oracle/product/11.2.0/dbhome_1/dbs>
Thank you for your help.

Multiple Character set for NLS

Hi,
I'm using Oracle 8i database. Is it possible to set the different character set for the database? The requirement is to support the two different character set data, one (main) Japanese character set and other Simplified Japanese. Or is there any other way in which i can store these data (Japanese & Chinese)?
Thanks & Regards,
Jayesh

Please don't get me wrong. Currently it is set in the windows database. I did not set nls_lang at the command prompt before import into windows. However nls_lang is already set and it is character set WE8ISO8859P1 the same as the value I specified in creation script, besides the other two values AMERICAN, AMERICA. They are now same in both solaris and windows. Only the character sets are different because I specified a different one. So, is it ok or do I now need another fresh import this time with nls_lang set to AMERICAN_AMERICA.UTF8 ?

May i use nls_charset12 to convert character set before executeQuery()?

i got a problem for the db nls character set
isn't us7ascii, so while retreiving data from database the data stored in ResultSet is changed to UTF-8 format. thus, my question is - how to convert character set before my executuing the method
executeQuery() or any other methods would be appreciated.
thanks in advice,

This is Tommy. I saw your post on Oracle Forum. Can you give me the classes12.zip, classes12_g.zip, and nls_charset12.zip ?!
Thx in advance !!
Tommy fromTaiwan ( July 3, 2001 )

SSIS - "Text was truncated or one or more characters had no match in the target code page"

Hello everyone,
SQL server 2012, SSIS package, we are getting the following error for some of the mapped columns,
"Text was truncated or one or more characters had no match in the target code page."
We're fetching the data from CSV file and dumping that to staging table i.e. SQL server 2012.
Can anybody please advise how to resolve this error/problem? It's urgent.
Any help would be much appreciated.
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com

You can enable data viewer (Right click on data flow connector --> Enable Data Viewer) before loading records to find out what's going on. Also, Configure error output to re-direct rows, so you can analyse data type and length.
Also, try this:
Ultimately, in the Advanced Editor of the source datafile, on the Input and Output Properties tab, under External Columns, there is a
Length property that defaults to 50. Changing that to match the Target Database File did the trick. [Source]
Check this links: Add a Data Viewer to a Data Flow
web: www.ronnierahman.com

Item cost not found for one or more items - Inventory Posting

Good Day Mentors,
My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items".
The specific Message ID from SAP's System Message Log is 10001287.
I found a similar post which addresses this error here.
But unfortunately it did not help me solve my user's problem.
I already checked if the items had a defined "Item Cost" in the Item Master Data Inventory Tab, and they all have "Item Cost" defined.
I'm not sure if this will help, but below is the Inventory Audit Report of one of the items that is throwing the "Item cost not found" error.
I am not a business consultant neither am I literate in accounting, so thanks for the patience.
SAP Version: 9.0 PL5
Valuation Method: Moving Average
Thanks in advance!
Sean

Hi Augusto and Raviraj,
I've already verified in our production database the points you made:
- Is the "Manage Item cost per warehouse" selected in the Basic Initialization Screen?
YES
- Is the "Manage Inventory by Warehouse" ticked/checked in the "Inventory Data" tab of the "Item Master Data" screen?
YES
* I apologize for not have been able to give this information upfront.
Anyway, the database only has one warehouse at the moment.
I've checked the items, like the item in the screen shot above, and it does have an item cost.
Below is the screenshot of the sample item from my original post,
Thanks in advance!
Sean

Convert character sets for one or more characters

Similar Messages

Maybe you are looking for