Convert wav files into iTunes

Okay this is the challenge.
Have both PC and Macs but have a huge library of music on my PC.
Need to convert it for use in iTunes.
Pretty much I can figure that out but I also want all the album information too.
So the question is do I install iTunes on the PC and import the files as Apple directs or is there a third party software that will convert it all to MP3 and then just import it into iTune on my Mac?
Any help would be great, thanks.
Mark

If music quality is important to you dont convert wav to mp3, you lose a great deal of audio quality! You should be able to save your itunes library file and move all your songs over to your mac and then when you open itunes hold down the option key before you click the itunes icon. It will ask you to chose an itunes library. Then just locate the itunes library file you put on your mac and so long as all your music is in the same folder structure as it was on the previous computer it should all sync up.

Similar Messages

Urgent How to convert wav files into mp3?

Can anyone plz tell me how can i convert wav file into mp3 using JMF? tell me any sample programme, any method in JMF........ help me plz

Examples could be found on the JMF Solutions page.
Only I can say about mp3 through network - it's hardly possible. I recommend GSM for compression2transmit. It could be used via GSM content descriptor. I'm not sure, but I suppose MP3 is supported only for files, there's no MP3.RTP or such (if you want to transmit files, it should not cause any problems).
About JavaSound - it does not matter... You still need JMF to be installed on Client, and AppletCapture to be enabled. Futrher - would it be DirectSound, JavaSound, or anything else - just the deal of JMF.
I tried to use JavaSound capture with proceeding AudioInputStream to JMF, but failed to do this.
About your problem - best solution seems like that:
capture sound
put it into processor
set format to GSM
transmit
so then, server receives it and formats it as it likes.
If you want to transmit exactly files, you should use just some of pure java after capturing. java.net, or such thing.

I cannot import 5.1 WAV files into iTunes

Hello
I'm running iTunes 11.1.5 (5) 64 bit on OSX 10.9.2. I'm trying to import some wav files into iTunes, they are about 6-11 minutes long each, they have 5.1 (6 total) channels, 16 bit depth and are sampled at 48,000 kHz. I can run them in QuickTime Player 10.3 (727.3) without any problems, but iTunes will not run them. This stil happens if I try to import the same files when they are in Apple Lossless format as well. I have several other surround sound files sourced from other stuff and they wil not import either, but they still run in Quicktime Player just fine. I don't have any pluging installed for iTunes or QuickTime Player. Does iTunes just not support surround sound audio, or is there something wrong with the files that I'm trying to import?

Hi Michael,
I bounced a PCM 5.1 WAV Audio File from Logic Pro X, This File alredy plays 5.1 surround from desktop just with the space bar preview and also with QuickTime ok? But Itunes 11 doesn´t import PCM 5.1 (multi) Wav audio files as you know, so I Knew that in the Itunes 11 for the movies tracks the 5.1 surround audio is automatic.See this link below
http://support.apple.com/kb/ht4072 -
What I did?
I just imported my audio file to Apple COMPRRESSOR, and choose the H.264 output format and I changed from .MOV to .MP4 (This one Itunes import with multi audio 5.1)
and also select 48 Khz and 720 Kbps. After encoding my audio file from ( 226 Mb) PCM 5.1 Wav about 4.20' went to a AAC 6 channes 48 Khz / 720 Kbps .MP4 file with 24 Mb size. Itunes import withou problem and played 5.1 surround as I wish.
I hope you understood my explanation,
Regards
Paulo

How to import large library of .wav files into itunes with tags?

I have an external NAS drive where I imported approximately 400 CDs in .wav format utilizing itunes many years ago. My itunes library was recently corrupted requiring a reinstall of itunes. The .wav files are preserved and are filed by Artist folders containing Album subfolders which contain the tracks listed by number and name. The problem is when I reimport the files into itunes the artist and album name is lost leaving only the track name, which makes it impossible to organize a library of music.
I would like to batch process and import the .wav files on my NAS drive into itunes in either a high-quality mp3 or AAC format with the songs tagged correctly to allow for an organized and searchable library. I would rather not have to reburn all of the CDs since that required substantial time and effort.
I welcome any solution to this problem.

itunes can't do what you want. It will do exactly what you said, lose everything, because wav files don't have ID3 tags. And, I suspect it dumps it all into an "Unknown Album" subfolder under "Unknown Artist".
You can try the tagFromFileName script on this page, brought to you by an apple discussion forum regular turingtest2. I have not used it myself, but have seen posts from several people happy with the results!
http://samsoft.org.uk/iTunes/scripts.asp

Can't import WAV files into iTunes

I have ripped most of my music to WAV files but iTunes refuses to import them. Neither the add folder function, the add file function, nor the drag and drop will add them. It does absolutely nothing.
Anybody know how to get around this problem?

It's not altering the file. It's simply playing back different.
iTunes prefs -> Playback.
Untick Sound Check, Sound Enhancer and Cross Fade playback.
Go to menu View -> Show Equalizer and set it to Off.

Importing wav. files into itunes on MAC OSX

I have a question, hope someone has the answer.
I am a new mac owner, new ipod owner too.
I currently have 200-300 gigabytes of SHN and FLAC files on my PC (mostly grateful dead soundboard recordings).
I am planning on converting these files to WAV. format with "artist", "album" (show date), and "song" ID tags.
I then plan on copying these WAV. files to my imac or separate external hard drive formatted for MAC OSX.
OK THE QUESTION (finally, no?),
When WAV. files are imported into itunes are they automatically converted to the MP4 AAC format?
I have looked in the itune PREFERENCES menu I go to ADVANCED and see that there is a control for switching file formats for importing CD'S but there is no mention of importing WAV. files.
On another note it is too bad that Apple has not come up with a file conversion utility for itunes, where FLAC, SHN, and WAV. files could be converted to MP4AAC, Apple Losless, etc...
I appreciate any answers to my question, and also comments regarding the general subject of audio file conversion on the MAC OSX.
Thanks

Hi,
Firstly, I must point out that WAV doesn't support tagging, so there is no point in converting your compressed FLAC and SHN files to WAV before making the move over to a Mac.
Rather, it would make more sense to use the free and excellent Max to convert all these files automatically to the format of your choice, such as Apple Lossless. You can even run multiple conversions simultaneously, so you could, say, convert your whole lot of files to Apple Lossless while at the same time convert the same lot to AAC for use on your iPod. The program is highly configurable, allowing you to specify destination directories and whether or not the output files are added directly to your iTunes library. Also, the tagging will be preserved when converting FLAC and SHN files to supported formats.

HT3819 How do I convert WAV files in iTunes Library to MP3?

I have a SwiMP3 device that plays music through headphones while I swim. It only accepts MP3 files and many of the files in my iTunes library are WAV files. How do I convert these to MP3? Thanks, David T

In your iTunes, set Edit/Preferences/Import Settings to MP3. Then highlight the song you want to convert and click on Advanced/Create MP3 version. A second version of the song will now appear in your Library.

Importing a wav file into iTunes

I get voice mail forwarded to email in the form of a .wav file. It will not play back on my MacBook (1st generation black). If I import it into iTunes (drag n drop) it looks like it accepts but nothing happens. Why?

The WAV files produced by voice recorders are low bit-rate WAVs, quite different from CD-quality WAVs.
I do not know exactly what the problem is, but I can tell you that since iTunes 8 came out, this forum often gets complaints about iTunes not properly handling low bitrate WAV files.
Personally I would get a 3rd party conversion tool and make them into MP3s, but maybe someone has a better idea.

Error message when dragging wav files into iTunes

I am getting an error message recently "There is not enough room on '''' to copy all of the requested files. iTunes will copy as many files as possible." No files end up getting copied. I have a 60GB video with only 22 used. I have dragged files before with no problem. I have tried deleting some files that I don't really listen to and it will help to free up some space for one or two more files, but I shouldn't have to do this at this point. Any clues?
Compaq Windows XP Pro

Cannot import WAV files into itunes with 8.01!

Although I see posts in this category, this question has not been answered. iTunes 8 and 8.01 have lost a critical capability compared to iTunes 7. I have an Olympus digital voice recorder that I like to download to my ipod. I could do this before 8.01! Now I cannot!
Are you working on a solution?

Check out this thread:
http://discussions.apple.com/thread.jspa?messageID=8645977&#8645977

Placing 24/192 WAV files on iTunes for playback through Wadia 170 iTranspor

I record live music on a Sound Devices 722 digital audio recorder at 24/192 as WAV files. I can import the 24/192 WAV file into iTunes on a Mac and the bit rate is displayed as 9216 kps. This makes sense since 24x192=9216. When I click on the song in iTunes it plays back at the correct tempo.
I bought a Wadia 170 iTransport since it says it will output bit perfect digital files. I'd love to hear my recordings this way over my sound system. I understand that this would chew up drive space real fast on an iPod. However . . .
I can't get my iPod to accept the 9216 kps song files. I went to set iTunes / Preferences / Advanced / Importing to WAV but the options for sample rate only go up to 48.0 kps and the bit rate up to 16-bit.
Any thoughts or suggestions on how to overcome this will be appreciated.

Hi,
I'm from germany so no 'best buy' but I think I will lock around sleeve/bag for a different product with same measures. Any tip?
The clear plastic case is not what I want. I would like to use the player without such protections. I just want a sleeve to protect the player while its in my jacket/pants.
Btw, i have bought this version: Creative Zen (maybe european version?). I also doesn't seem to have your mentioned sleeve. I also couldn't find it on the website.
Anyway, thank you,
Chris

Converting .wmv to .mov files or how do i get .wmv files into itunes?help!

i recently got some video but some of it is in .wmv format and i need to know how to convert these to .mov format
or
how do i get .wmv files into iTunes.
plz help

Intervideo sells software that will convert your files into a format that can be read by an Ipod.

How to convert .MP3 files into .AAC with iTunes 10.5.2

Im running a Mac OS X 10.5.8, and my iTunes version is 10.5.2.
I want to convert .MP3 files into .AAC using iTunes, but no option is given for me. What should I do?

im not going to change all my songs into AAC, I was experiementing around with making ringtones for my iphone. I can open a song in Garageband, and export it as an AAC file to my itunes, but it is very annoying. I remember older versions of itunes having a "Convert to AAC" option, but i can't find it anymore on this current version of itunes.
Basically, I want to convert a couple songs into AAC to create ringtones out of them.

How to convert Wav file in to byte array an vise vers into RMS???????????

hi Constantinos Loizou
i m having same problem which u were facing in last month.
my problem i have to save .WAV file into RMS and then retreive it from RMS.
my Code is
Read From RMS
RecordStore rsUser = RecordStore.openRecordStore(file,true);
if(rsUser.getNumRecords() > 0)
try {
byte[] byusrinfo = rsUser.getRecord(1);
InputStream in = new ByteArrayInputStream(byusrinfo,0,byusrinfo.length);
p = Manager.createPlayer(in,"audio/x-wav");
p.start();
return true;
catch(Exception ex) {
ex.printStackTrace();
return false;
rsUser.closeRecordStore();
catch(Exception ex) {
ex.printStackTrace();
return false;
Write in RMS
try {
RecordStore rsUser = RecordStore.openRecordStore(file,true);
int idata = is.available();
byte[] exdata = new byte[idata];
is.read(exdata);
if(rsUser.getNumRecords() > 0) {
rsUser.setRecord(1,exdata,0,exdata.length);
else {
rsUser.addRecord(exdata,0,exdata.length);
rsUser.closeRecordStore();
catch(Exception ex) {
ex.printStackTrace ();
now i have the file successfully when i retrieve it from RMS and p.reliaze() give me exception
javax.microedition.media.MediaException: Failed to realize Player: Malformed wave media: expected 'RIFF'
have u able to solve it. if yes then pls give me solution. or give other solution if this soution is not good
regardz
Hassan Mushtaq

Well, I'm not going to give you your code on a silver platter. You'll need to put some effort in it yourself.
So look at that available() method yourself an see if you can improve on that. Look at the api docs, there is loads of information there, and often it will give you pointers on why things are not working.

Converting WAV files to AAC Error convert Can't read from or write to disk

For several weeks I had no problem converting WAV files (from an Olympus Digital Recorder) to AAC format in iTunes, then one day I clicked "Convert Selection to AAC" and received the message "Error occured while converting the file. The disk could not be read from or written to." There is no Error # associated with the Error message.

I recently spent over 14 hours converting all my CD songs to WAV. WAV conversion was the only one of two options available with my older Nero software, and MP3 conversion was not an option. I intended to make mixed CD's. By the time I was done, I had over 300 songs that take up over 17 GB in this WAV format.
The thought of sitting even more endless hours making these CD's made me even more exhausted, and I realized that I should get with the times and get an MP3 player. So, I bought an iPod directly from Apple two days ago (12/16), and get this, MaclessInAZ, the sales person told me that I all my WAV files could be imported into my iPod with iTunes. (!!!)
I am very glad to have read this thread before I got my iPod. I would have been so upset if there was no easy solution. My new iPod is supposed to be delivered tomorrow, and I am looking forward to getting it. Many thanks to weavercs for the information on the Switch program that converts WAV to MP3. Even if I decide to buy the full version of Switch, it is a lot less expensive than other conversion programs that I just found online, like Roxio.

Convert wav files into iTunes

Similar Messages

Maybe you are looking for