Convert XML file into ABAP Query
Hi All,
Can we capture a XML file generated from a Non-SAP system in SAP system and convert into ABAP Query to retreive Data from DB and post it back as a XML query to the same Non-SAP system using a Middleware. Can this process be done in cache memory level itself instead of saving in DB.
If it is possible pls do tell the procedure and steps to be followed.
Suggestion and Help will be much Appreciated
Thanks & Regds.
Ramesh
Hi check these blogs....
<a href="/people/r.eijpe/blog/2005/11/21/xml-dom-processing-in-abap-part-ii--convert-an-xml-file-into-an-abap-table-using-sap-dom-approach:///people/r.eijpe/blog/2005/11/21/xml-dom-processing-in-abap-part-ii--convert-an-xml-file-into-an-abap-table-using-sap-dom-approach
<a href="/people/tobias.trapp/blog/2005/12/08/xml-processing-in-abap--part-6:///people/tobias.trapp/blog/2005/12/08/xml-processing-in-abap--part-6
Similar Messages
-
Hi,
Is there any way to upload an XML file into ABAP WD?
I just saw a blog for Java WD.
<a href="/people/johann.marty/blog/2006/10/03/create-a-web-dynpro-tree-from-an-xml-file:///people/johann.marty/blog/2006/10/03/create-a-web-dynpro-tree-from-an-xml-file
Is there a similar facility in ABAP WD?
Regards,
Haresh.hey u can do this by using CALL Transformation id.. command..
here is the example code where i wrote this to convert it DATA to XML format...it may help u..
DATA : BEGIN OF l_xml_tab OCCURS 0,
a(100) TYPE c,
END OF l_xml_tab.
DATA : xml_out TYPE string .
DATA : lw_xml_tab LIKE LINE OF l_xml_tab.
XML
CALL TRANSFORMATION id "('ID')
SOURCE tab = gt_outtab[]
RESULT XML xml_out.
Convert to TABLE
CALL FUNCTION 'HR_EFI_CONVERT_STRING_TO_TABLE'
EXPORTING
i_string = xml_out
i_tabline_length = 100
TABLES
et_table = l_xml_tab.
OPEN DATASET p_lgfil1 FOR OUTPUT IN BINARY MODE.
LOOP AT l_xml_tab INTO lw_xml_tab.
TRANSFER lw_xml_tab TO p_lgfil1.
ENDLOOP.
CLOSE DATASET p_lgfil1. -
Simple Transformation to deserialize an XML file into ABAP data structures?
I'm attempting to write my first simple transformation to deserialize
an XML file into ABAP data structures and I have a few questions.
My simple transformation contains code like the following
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates"
xmlns:pp="http://www.sap.com/abapxml/types/defined" >
<tt:type name="REPORT" line-type="?">
<tt:node name="COMPANY_ID" type="C" length="10" />
<tt:node name="JOB_ID" type="C" length="20" />
<tt:node name="TYPE_CSV" type="C" length="1" />
<tt:node name="TYPE_XLS" type="C" length="1" />
<tt:node name="TYPE_PDF" type="C" length="1" />
<tt:node name="IS_NEW" type="C" length="1" />
</tt:type>
<tt:root name="ROOT2" type="pp:REPORT" />
<QueryResponse>
<tt:loop ref="ROOT2" name="line">
<QueryResponseRow>
<CompanyID>
<tt:value ref="$line.COMPANY_ID" />
</CompanyID>
<JobID>
<tt:value ref="$line.JOB_ID" />
</JobID>
<ExportTypes>
<tt:loop>
<ExportType>
I don't know what to do here (see item 3, below)
</ExportType>
</tt:loop>
</ExportTypes>
<IsNew>
<tt:value ref="$line.IS_NEW"
map="val(' ') = xml('false'), val('X') = xml('true')" />
</IsNew>
</QueryResponseRow>
</tt:loop>
</QueryResponse>
</tt:loop>
1. In a DTD, an element can be designated as occurring zero or one
time, zero or more times, or one or more times. How do I write the
simple transformation to accommodate these possibilities?
2. In trying to accommodate the "zero or more times" case, I am trying
to use the <tt:loop> instruction. It occurs several layers deep in the
XML hierarchy, but at the top level of the ABAP table. The internal
table has a structure defined in the ABAP program, not in the data
dictionary. In the simple transformation, I used <tt:type> and
<tt:node> to define the structure of the internal table and then
tried to use <tt:loop ref="ROOT2" name="line"> around the subtree that
can occur zero or more times. But every variation I try seems to get
different errors. Can anyone supply a working example of this?
3. Among the fields in the internal table, I've defined three
one-character fields named TYPE_CSV, TYPE_XLS, and TYPE_PDF. In the
XML file, I expect zero to three elements of the form
<ExportType exporttype='csv' />
<ExportType exporttype='xls' />
<ExportType exporttype='pdf' />
I want to set field TYPE_CSV = 'X' if I find an ExportType element
with its exporttype attribute set to 'csv'. I want to set field
TYPE_XLS = 'X' if I find an ExportType element with its exporttype
attribute set to 'xls'. I want to set field TYPE_PDF = 'X' if I find
an ExportType element with its exporttype attribute set to 'pdf'. How
can I do that?
4. For an element that has a value like
<ErrorCode>123</ErrorCode>
in the simple transformation, the sequence
<ErrorCode> <tt:value ref="ROOT1.CODE" /> </ErrorCode>
seems to work just fine.
I have other situations where the XML reads
<IsNew value='true' />
I wanted to write
<IsNew>
<tt:value ref="$line.IS_NEW"
map="val(' ') = xml('false'), val('X') = xml('true')" />
</IsNew>
but I'm afraid that the <tt:value> fails to deal with the fact that in
the XML file the value is being passed as the value of an attribute
(named "value"), rather than the value of the element itself. How do
you handle this?Try this code below:
data l_xml_table2 type table of xml_line with header line.
W_filename - This is a Path.
if w_filename(02) = '
open dataset w_filename for output in binary mode.
if sy-subrc = 0.
l_xml_table2[] = l_xml_table[].
loop at l_xml_table2.
transfer l_xml_table2 to w_filename.
endloop.
endif.
close dataset w_filename.
else.
call method cl_gui_frontend_services=>gui_download
exporting
bin_filesize = l_xml_size
filename = w_filename
filetype = 'BIN'
changing
data_tab = l_xml_table
exceptions
others = 24.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif. -
Convert XML file into PDF file
<b>XML to PDF</b>i want to Convert XML file into PDF file pl. any one can suggests API's
Hi,
There are many ways to convert XML files to PDFs through java.
One of the easiest way is by using iText.jar which have classes for conversion.
The following are the required steps
1. Create a document object for the XML file ( Using DOM or SAX parser).
2. Parse the xml document and extract the content to write in PDF.
3.Create a itext Document object.
4.Get a PdfWriter instance for the PDF file.
5.Write in the pdf the extracted text using the document object.
Refer <a href="http://itextdocs.lowagie.com/examples/com/lowagie/examples/general/HelloWorld.java">here</a> for a simple pdf writer example.
Refer <a href="http://java.sun.com/developer/codesamples/xml.html">here</a> for examples of XML Parsers.
Regards,
Uma -
How to convert xml file into internal table in ABAP Mapping.
Hi All,
I am trying with ABAP mapping. I have one scenario in which I'm using below xml file as a sender from my FTP server.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MTO_ABAP_MAPPING xmlns:ns0="http://Capgemini/Mumbai/sarsingh">
<BookingCode>2KY34R</BookingCode>
- <Passenger>
<Name>SARVESH</Name>
<Address>THANE</Address>
</Passenger>
- <Passenger>
<Name>RAJESH</Name>
<Address>POWAI</Address>
</Passenger>
- <Passenger>
<Name>CARRON</Name>
<Address>JUHU</Address>
</Passenger>
- <Flight>
<Date>03/03/07</Date>
<AirlineID>UA</AirlineID>
<FlightNumber>125</FlightNumber>
<From>LAS</From>
<To>SFO</To>
</Flight>
</ns0:MTO_ABAP_MAPPING>
AT the receiver side I wnat to concatenate the NAME & ADDRESS.
I tried Robert Eijpe's weblog (/people/r.eijpe/blog/2005/11/21/xml-dom-processing-in-abap-part-ii--convert-an-xml-file-into-an-abap-table-using-sap-dom-approach)
but couldnt succeed to convert the xml file into internal table perfectly.
Can anybody help on this.
Thanks in advance!!
SarveshHi Sarvesh,
The pdf has details of ABAP mapping. The example given almost matches the xml file you want to be converted.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how to use abap-mapping in xi 3.0.pdf
Just in case you have not seen this
regards
Vijaya -
Hello folks,
I've been struggling and I need to figure out how to read a field from an XML field into ABAP. I'm writing this method and I need to call this field from my XML file. Can you guys please give me suggestions? Please advise. I will appreciate your time. Thanks in advance.
Ol.*& Report z_xit_xml_check
report z_xit_xml_check.
class cl_ixml definition load.
type-pools: ixml.
types: begin of t_xml_line,
data(256) type x,
end of t_xml_line,
begin of tsfixml,
data(1024) type c,
end of tsfixml.
data: l_ixml type ref to if_ixml,
l_streamfactory type ref to if_ixml_stream_factory,
l_parser type ref to if_ixml_parser,
l_istream type ref to if_ixml_istream,
l_document type ref to if_ixml_document,
l_node type ref to if_ixml_node,
l_xmldata type string.
data: l_elem type ref to if_ixml_element,
l_root_node type ref to if_ixml_node,
l_next_node type ref to if_ixml_node,
l_name type string,
l_iterator type ref to if_ixml_node_iterator.
data: l_xml_table type table of t_xml_line,
l_xml_line type t_xml_line,
l_xml_table_size type i.
data: l_filename type string.
parameters: pa_file type char1024 default
'd:\joao\desenvolvimentos\fi\fact\teste.xml'.
Validation of XML file: Only DTD included in xml document is supported
parameters: pa_val type char1 as checkbox.
start-of-selection.
Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
perform get_xml_table changing l_xml_table_size l_xml_table.
wrap the table containing the file into a stream
l_istream = l_streamfactory->create_istream_itable( table =
l_xml_table
size =
l_xml_table_size ).
Creating a document
l_document = l_ixml->create_document( ).
Create a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
istream = l_istream
document = l_document ).
Validate a document
if pa_val eq 'X'.
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
endif.
Parse the stream
if l_parser->parse( ) ne 0.
if l_parser->num_errors( ) ne 0.
data: parseerror type ref to if_ixml_parse_error,
str type string,
i type i,
count type i,
index type i.
count = l_parser->num_errors( ).
write: count, ' parse errors have occured:'.
index = 0.
while index < count.
parseerror = l_parser->get_error( index = index ).
i = parseerror->get_line( ).
write: 'line: ', i.
i = parseerror->get_column( ).
write: 'column: ', i.
str = parseerror->get_reason( ).
write: str.
index = index + 1.
endwhile.
endif.
endif.
Process the document
if l_parser->is_dom_generating( ) eq 'X'.
perform process_dom using l_document.
endif.
*& Form get_xml_table
form get_xml_table changing l_xml_table_size type i
l_xml_table type standard table.
Local variable declaration
data: l_len type i,
l_len2 type i,
l_tab type tsfixml,
l_content type string,
l_str1 type string,
c_conv TYPE REF TO cl_abap_conv_in_ce,
l_itab type table of string.
l_filename = pa_file.
upload a file from the client's workstation
call method cl_gui_frontend_services=>gui_upload
exporting
filename = l_filename
filetype = 'BIN'
importing
filelength = l_xml_table_size
changing
data_tab = l_xml_table
exceptions
others = 19.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
Writing the XML document to the screen
CLEAR l_str1.
LOOP AT l_xml_table INTO l_xml_line.
c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data
*replacement = space ).
c_conv->read( IMPORTING data = l_content len = l_len ).
CONCATENATE l_str1 l_content INTO l_str1.
ENDLOOP.
l_str1 = l_str1+0(l_xml_table_size).
SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
WRITE: /.
WRITE: /' XML File'.
WRITE: /.
LOOP AT l_itab INTO l_str1.
REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab
*IN
l_str1 WITH space.
WRITE: / l_str1.
ENDLOOP.
WRITE: /.
endform. "get_xml_table
*& Form process_dom
form process_dom using document type ref to if_ixml_document.
data: node type ref to if_ixml_node,
iterator type ref to if_ixml_node_iterator,
nodemap type ref to if_ixml_named_node_map,
attr type ref to if_ixml_node,
name type string,
prefix type string,
value type string,
indent type i,
count type i,
index type i.
data: name2 type string,
name_root type string,
node_parent type ref to if_ixml_node,
node_root type ref to if_ixml_node,
num_children type i.
node ?= document.
check not node is initial.
uline.
write: /.
write: /' DOM-TREE'.
write: /.
if node is initial. exit. endif.
create a node iterator
iterator = node->create_iterator( ).
get current node
node = iterator->get_next( ).
loop over all nodes
while not node is initial.
indent = node->get_height( ) * 2.
indent = indent + 20.
num_children = node->num_children( ).
case node->get_type( ).
when if_ixml_node=>co_node_element.
element node
name = node->get_name( ).
nodemap = node->get_attributes( ).
node_root = node->get_root( ).
name_root = node_root->get_name( ).
write: / 'ELEMENT :'.
write: at indent name color col_positive inverse.
write: 'NUM_CHILDREN:', num_children.
write: 'ROOT:', name_root.
node_parent = node->get_parent( ).
name2 = node_parent->get_name( ).
write: 'NAME2: ' , name2.
if not nodemap is initial.
attributes
count = nodemap->get_length( ).
do count times.
index = sy-index - 1.
attr = nodemap->get_item( index ).
name = attr->get_name( ).
prefix = attr->get_namespace_prefix( ).
value = attr->get_value( ).
write: / 'ATTRIBUTE:'.
write: at indent name color col_heading inverse, '=',
value color col_total inverse.
enddo.
endif.
when if_ixml_node=>co_node_text or
if_ixml_node=>co_node_cdata_section.
text node
value = node->get_value( ).
write: / 'VALUE :'.
mjprocha
node_parent = node->get_parent( ).
write: at indent value color col_group inverse.
name2 = node_parent->get_name( ).
write: 'NAME2: ' , name2.
endcase.
advance to next node
node = iterator->get_next( ).
endwhile.
endform. "process_dom -
Convert XML file into DTD using Java
Hi All,
I want to do convert the xml file into DTD using Java.
I read the DOM package but didnt get clear idea.
Anyone of you have an idea please share the coding with me.
Any suggestions greatly appreciated.
Thanks
VeeraHi All,
I want to do convert the xml file into DTD using Java.
I read the DOM package but didnt get clear idea.
Anyone of you have an idea please share the coding with me.
Any suggestions greatly appreciated.
Thanks
Veera -
Convert xml file into a JDOM Element object?
Hi,
I need to convert an xml file into a JDOM Element object.
I need to do that because I need to pass the JDOM Element object to another method for processing.
That method takes in a JDOM element object as a single parameter for that method: it was supplied by my supervisor.
Does anyone knows how to do that?
Please advice and give me some example.
Regards.Hi,
You misunderstood me.
The javaworld article shows you how to convert the xml file to JDOM Document object using SAXBuilder; I am very aware of it as I had done it before.
Now the problem is tha tI need to convert the xml file to JDOM Element object instead.
The JDOM Element object contains the whole xml file and that JDOM Element object will be input into a parameter of a method for use.
Can anyone help? -
Convert xml file into Image file
Hi,
How to transform xml file into image file?.
i don want to transform the xml file into html file.
Thanks,
nithiOne way I can think of is to create a java.awt.BufferedImage, and use its Graphics object to print out the xml (count the lines first, and space them to your liking). Then if you want to save it to e.g. png or jpg there are free libraries for that, whose names I don't remember at the moment... Dunno why you'd wanna do this though :)
-
We have a matisse compiler which reads the *.xml files and converts this into *.java files. Do we have a plugin
for this compiler which can by used with MyEclipse or Eclipse.Does anybody know how to convert x.class file back to a x.java file.As Dr.Clap said, that's decompiling.
Or in other terms, extract .java files from a jarfile??That isn't quite the same thing. You can decompile a .class that's in a jar, but a .class file doesn't have to be in a jar and a file in a jar isn't necessarily a .class. -
I want to convert XML file into SAP Internal table
Hi Frndz,
My xml file is:
<?xml version="1.0" ?>
- <!-- Comments: START DATE :1/11/2002 11:26:14 PM
-->
- <!-- Comments: RFID Tags read by Mercury4 Copyright Praff@Anantara Solutions
-->
<RFIDs><ID>0x303030303030303035050000B5EC</ID><ID>0x300833B2DDD901403505000042E7</ID></RFIDs>
i want to take those 2 ID's in a internal table that id field is of 28 character type....
very urgent.
Thanks,
Arunprasad.Pclass cl_ixml definition load.
type-pools: ixml.
types: begin of t_xml_line,
data(256) type x,
end of t_xml_line,
begin of tsfixml,
data(1024) type c,
end of tsfixml.
data: l_ixml type ref to if_ixml,
l_streamfactory type ref to if_ixml_stream_factory,
l_parser type ref to if_ixml_parser,
l_istream type ref to if_ixml_istream,
l_document type ref to if_ixml_document,
l_node type ref to if_ixml_node,
l_xmldata type string.
data: l_elem type ref to if_ixml_element,
l_root_node type ref to if_ixml_node,
l_next_node type ref to if_ixml_node,
l_name type string,
l_iterator type ref to if_ixml_node_iterator.
data: l_xml_table type table of t_xml_line,
l_xml_line type t_xml_line,
l_xml_table_size type i.
data: l_filename type string.
parameters: pa_file type char1024 default
'C:\WINDOWS\Desktop\RFIDTags.xml'.
*Validation of XML file: Only DTD included in xml document is supported
parameters: pa_val type char1 as checkbox.
start-of-selection.
*Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
*Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
perform get_xml_table changing l_xml_table_size l_xml_table.
*wrap the table containing the file into a stream
l_istream = l_streamfactory->create_istream_itable( table = l_xml_table
size = l_xml_table_size ).
*Creating a document
l_document = l_ixml->create_document( ).
*Create a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
istream = l_istream
document = l_document ).
*Validate a document
if pa_val eq 'X'.
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
endif.
*Parse the stream
if l_parser->parse( ) ne 0.
if l_parser->num_errors( ) ne 0.
data: parseerror type ref to if_ixml_parse_error,
str type string,
i type i,
count type i,
index type i.
count = l_parser->num_errors( ).
write: count, ' parse errors have occured:'.
index = 0.
while index < count.
parseerror = l_parser->get_error( index = index ).
i = parseerror->get_line( ).
write: 'line: ', i.
i = parseerror->get_column( ).
write: 'column: ', i.
str = parseerror->get_reason( ).
write: str.
index = index + 1.
endwhile.
endif.
endif.
*Process the document
if l_parser->is_dom_generating( ) eq 'X'.
perform process_dom using l_document.
endif.
*& Form get_xml_table
form get_xml_table changing l_xml_table_size type i
l_xml_table type standard table.
*Local variable declaration
data: l_len type i,
l_len2 type i,
l_tab type tsfixml,
l_content type string,
l_str1 type string,
c_conv TYPE REF TO cl_abap_conv_in_ce,
l_itab type table of string.
l_filename = pa_file.
*upload a file from the client's workstation
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = l_filename
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = l_xml_table_size
HEADER =
TABLES
DATA_TAB = l_xml_table
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Writing the XML document to the screen
CLEAR l_str1.
LOOP AT l_xml_table INTO l_xml_line.
c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data
replacement = space ).
c_conv->read( IMPORTING data = l_content len = l_len ).
CONCATENATE l_str1 l_content INTO l_str1.
ENDLOOP.
l_str1 = l_str1+0(l_xml_table_size).
SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
WRITE: /.
WRITE: /' XML File'.
WRITE: /.
LOOP AT l_itab INTO l_str1.
REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab
IN
l_str1 WITH space.
WRITE: / l_str1.
ENDLOOP.
WRITE: /.
endform. "get_xml_table
*& Form process_dom
form process_dom using document type ref to if_ixml_document.
data: node type ref to if_ixml_node,
iterator type ref to if_ixml_node_iterator,
nodemap type ref to if_ixml_named_node_map,
attr type ref to if_ixml_node,
name type string,
prefix type string,
value type string,
indent type i,
count type i,
index type i.
data: name2 type string,
name_root type string,
node_parent type ref to if_ixml_node,
node_root type ref to if_ixml_node,
num_children type i.
node ?= document.
check not node is initial.
uline.
write: /.
write: /' DOM-TREE'.
write: /.
if node is initial. exit. endif.
create a node iterator
iterator = node->create_iterator( ).
get current node
node = iterator->get_next( ).
loop over all nodes
while not node is initial.
indent = node->get_height( ) * 2.
indent = indent + 20.
num_children = node->num_children( ).
case node->get_type( ).
when if_ixml_node=>co_node_element.
element node
name = node->get_name( ).
nodemap = node->get_attributes( ).
node_root = node->get_root( ).
name_root = node_root->get_name( ).
write: / 'ELEMENT :'.
write: at indent name color col_positive inverse.
write: 'NUM_CHILDREN:', num_children.
write: 'ROOT:', name_root.
node_parent = node->get_parent( ).
name2 = node_parent->get_name( ).
write: 'NAME2: ' , name2.
if not nodemap is initial.
*attributes
count = nodemap->get_length( ).
do count times.
index = sy-index - 1.
attr = nodemap->get_item( index ).
name = attr->get_name( ).
prefix = attr->get_namespace_prefix( ).
value = attr->get_value( ).
write: / 'ATTRIBUTE:'.
write: at indent name color col_heading inverse, '=',
value color col_total inverse.
enddo.
endif.
when if_ixml_node=>co_node_text or
if_ixml_node=>co_node_cdata_section.
*text node
value = node->get_value( ).
write: / 'VALUE :'.
node_parent = node->get_parent( ).
write: at indent value color col_group inverse.
name2 = node_parent->get_name( ).
write: 'NAME2: ' , name2.
endcase.
*advance to next node
node = iterator->get_next( ).
endwhile.
endform. "process_dom
Thanks,
Arunprasad.P -
Convert xml file into .pdf and .html
hi all,
can any one let me know how can i show xml file values into pdf and html by using java
thanks in advancesreeks27 wrote:
hi all,
can any one let me know how can i show xml file values into pdf and html by using java
thanks in advanceTake a look at Apache FOP:
http://xmlgraphics.apache.org/fop/ -
How to convert XML file into DTD or XSD
Hi Folks,
This is the output structure I need to get. My interface is file to file. Can u please let me know How do I create a data type or any XSD to get below Structure.
<?xml version="1.0" encoding="UTF-8" ?>
- <Command xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="Command.xsd">
- <WriteTagData readerID="EasyDP">
- <Item>
- <FieldList format="C:\Documents and Settings\wlee\Desktop\Format_4A.btw" jobName="Test1" quantity="1">
<Field name="PlantNo">4012</Field>
<Field name="PlantName">ANE</Field>
<Field name="SKU">12000001</Field>
< </FieldList>
</Item>
</WriteTagData>
</Command>
Please help me How would I create Data type for this. Your help is highly apreciated
Thanks,
EnivassHi Enivas,
>>>>>>>>>Please help me how would I delete ns0.
For remove ns0, you have to do use XMLAnonymizerBean module in adpater module (In Communication channel).
Insert the XMLAnonymizerBean before the CallSapAdapter .
The module name u2018CallSapAdapteru2019 is default one that can be left as it is.
Module Name : AF_Modules/XMLAnonymizerBean
Type: Local Enterprise Bean
Module Key: 0
Add Parameters in the Module Configuration
2. Module Key: 0
Parameter Name: anonymizer.acceptNamespaces
Parameter Value: <namespace> u2018u2019
Enter a list of namespaces and their prefixes that are to be kept in the target XML document and to result a namespace without a prefix, enter u2018 u2018 (two single quotation marks). In your case like namespace http://www.w3.org/2001/XMLSchema-instance follow with two single quotation marks.
3. Module Key: 0
Parameter Name: anonymizer.quote
Parameter Value: u2018
Here specify the character to be used to enclose the attribute values. The default value is u2018.
When scenario is executed, the target message contains the namespace with no prefix.
Then, you are not facing any issue in target messages.
Regards,
Rajesh -
How to upload XML file into the internal table in Webdynpro ABAP ?
Hi Friends,
I am not able to upload the XML file into ABAP,can you please help me in solving this issue with the help of source code.
Regards
DineshHi Dinesh,
Try go through this program which I had developed earlier. It takes as input an XML file and then breaks it down into name-value pairs of an intrnal table. You need to pass an XML file as input to this program. (I had hard coded the path for my XML file in it. You need to replace it with 1 of your own or you can just delete it and use the browse button to selet the file on your PC)
Regards,
Uday
REPORT ZUDAY_XML no standard page heading.
" Internal table to store the XML file in binary mode
data: begin of it_xml occurs 1,
c(255) type x,
end of it_xml,
" Name-value pairs table rturned by FM SMUM_XML_PARSE
it_SMUM_XMLTB type SMUM_XMLTB occurs 0 with header line,
" Table returned by FM SMUM_XML_PARSE for error handling
it_bapiret2 type bapiret2 occurs 0 with header line.
" XSTRING variable to be used by FM SCMS_BINARY_TO_XSTRING to hold the XML file in XSTRING format
data: I_xstring type xstring,
" String variable to hold XML file path to pass to GUI_UPLOAD
I_file_path type string,
" Variable to store the size of the uploaded binary XML file
I_LENGTH TYPE I VALUE 0.
parameters: P_path type IBIPPARMS-PATH default 'C:\Documents and Settings\c5104398\Desktop\flights.xml'.
" Get the XML file path from the user
at selection-screen on value-request for P_path.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
FILE_NAME = P_PATH. -
Store/persist XML file on ABAP stack
Hi everybody,
as the ABAP Database is a relational DB, I wonder where to store a XML file. Is there a dedicated table?
Thanks
Regards Mario
Edited by: Mario Müller on Sep 10, 2008 2:21 AMhi
try with this function module SMUM_XML_PARSE for parsing xml document into a table structure
also check this document for how an abap prog take xml and convert into an abap internal table
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f50dcd4e-0501-0010-3596-b686a7b51492
convert an xml file into abap internal table using sap dom approach
XML DOM Processing in ABAP part II - Convert an XML file into an ABAP table using SAP DOM Approach.
regards
kummari
Maybe you are looking for
-
Mountain Lion keeps restarting
I have installed ML and when it has finished installing it restarts. Then the hue changes on screen about 3 times and my iMac restarts again. It has continuosly does this. i have uninstalled it and gone back to my previous version but I do want ML
-
Good Afternoon Community, I have an ipad 2 bought last Christmas. The other day I was using the ipad with no problems and shut it down. When I opened the ipad everything was in a horizontal position. This includes Safari, books, apps, etc. I went int
-
C5-00 and skyfire phone browser 1.5
Skyfire can't be installed on C5-00 for an unknown reason: Nokia ovi store says: Sorry, this item is not available for the Nokia C5-00. Browse more great content in the "Related" section below. Skyfire Free Mobile Browser Skyfire.com says: http://ww
-
From windows 7 laptop, "Insufficient access to connect to selected printer!
I am frustrated trying to setup printer sharing from Windows 7 laptop. Bonjour printer wizard keeps returning error message " You do not have sufficient access to your computer to connect to the selected printer" HELP PLEASE
-
App Store to download applications, "too many http redirect"
在App Store下载应用时,显示"太多http重定向"App Store to download applications, "too many http redirect"