Converting PO's in PDF format.
Hi All,
I have to configure SAP ECC system generated PO's in PDF Format. Customer should be able to download the file in PDF format or mail directly in PDF format.
Have come across some notes which mention that we have to do some coding for automation process.
Request you to kindly guide me how to configure this in the system. If any documention would really appretiate.
Thanks & Regards
Rupali S.
hi,
If you want to convert the PO to PDF and than attach the same in E Mail ,then follow the steps below.
1.Give Print command in ME9F .
2.Go to SP02 and note down the spool request number created by the print command.
3.Go to Se38 and enter programme name "RSTXPDFT4" and execute.
4.In the next screen enter the spool request number and execute .Here save the PO in pdf with a file name .
Now the PO is converted to pdf and can be attached in Email.
regards
ajai
Similar Messages
-
Hi my question abt 2 convert a list into pdf format
hi
experts
i had problem to convert displayed list into pdf format showing an error cannot open the file file format not supported, but i am have downloaded the file in .pdf format
please help me
thank you allHi,
check out this program. this might help:
report zabap_pdf.
tables:
tsp01.
data:
mstr_print_parms like pri_params,
mc_valid(1) type c,
mi_bytecount type i,
mi_length type i,
mi_rqident like tsp01-rqident.
*-- INTERNAL TABLES
data:
mtab_pdf like tline occurs 0 with header line,
mc_filename like rlgrap-filename.
*-- SELECTION SCREEN
parameters:
p_repid like sy-repid, " Report to execute
p_linsz like sy-linsz default 132, " Line size
p_paart like sy-paart default 'X_65_132'. " Paper Format
start-of-selection.
concatenate 'c:\'
p_repid
'.pdf'
into mc_filename.
*-- Setup the Print Parmaters
call function 'GET_PRINT_PARAMETERS'
exporting
authority= space
copies = '1'
cover_page = space
data_set = space
department = space
destination = space
expiration = '1'
immediately = space
in_archive_parameters = space
in_parameters = space
layout = space
mode = space
new_list_id = 'X'
no_dialog= 'X'
user = sy-uname
importing
out_parameters = mstr_print_parms
valid = mc_valid
exceptions
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
others = 4.
*-- Make sure that a printer destination has been set up
*-- If this is not done the PDF function module ABENDS
if mstr_print_parms-pdest = space.
mstr_print_parms-pdest = 'LOCL'.
endif.
*-- Explicitly set line width, and output format so that
*-- the PDF conversion comes out OK
mstr_print_parms-linsz = p_linsz.
mstr_print_parms-paart = p_paart.
submit (p_repid) to sap-spool without spool dynpro
spool parameters mstr_print_parms
via selection-screen
and return.
*-- Find out what the spool number is that was just created
perform get_spool_number using sy-repid
sy-uname
changing mi_rqident.
*-- Convert Spool to PDF
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid= mi_rqident
no_dialog = space
dst_device = mstr_print_parms-pdest
importing
pdf_bytecount = mi_bytecount
tables
pdf = mtab_pdf
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
others = 12.
call function 'DOWNLOAD'
exporting
bin_filesize = mi_bytecount
filename = mc_filename
filetype = 'BIN'
importing
act_filename = mc_filename
tables
data_tab = mtab_pdf.
FORM get_spool_number *
Get the most recent spool created by user/report *
--> F_REPID *
--> F_UNAME *
--> F_RQIDENT *
form get_spool_number using f_repid
f_uname
changing f_rqident.
data:
lc_rq2name like tsp01-rq2name.
concatenate f_repid+0(8)
f_uname+0(3)
into lc_rq2name separated by '_'.
select * from tsp01 where rq2name = lc_rq2name
order by rqcretime descending.
f_rqident = tsp01-rqident.
exit.
endselect.
if sy-subrc ne 0.
clear f_rqident.
endif.
endform." get_spool_number -
Hi, I have converted different smartforms to pdf format.How to combine pdf?
Hi All,
I have converted different smartforms to pdf format. How to combine all the pdf's into single pdf.
I need all the smartforms to be in single pdf.
Please help me in this regard.
Thanks in advance.Hi Keshu,
Individual pdf should be sent to individual user.
And at last all the pdfs of the smartform should be combined into one.
And admin have the provision to download it .
I mean the requirement is
For example.
For the month of september i will generate Pay Slip to each employee. And each pdf will be send to corresponding employee.
And finally all the pay slips of all the employees will be combined into single PDF and admin will download it and keep it for reference.
So as of now. I have generated individual pdfs and mailed it accordingly.
But how to combine it into one PDF is my question.
Please help me in this regard.
Thanks in advance. -
Problem in converting Spool Request into PDF format
Hi,
I am facing problem to convert spool request (which store output of sap script) in to PDF format. Actually I have converted it with function module 'CONVERT_OTFSPOOLJOB_2_PDF' and it is working properly but the problem occurs where the BOLD fonts are used. I am unable to see the Text/Address where i have used Bold Font in script (PDF FORMAT). Even though in (SPO1) spool request shows every thing perfectly (along with Bold Font). It will great if you could suggest me something.
Thanks,
PradeepHi Pradeep,
Use ,
Closing the Sapscript, we save data (OTF) in a table
CALL FUNCTION 'CLOSE_FORM'
TABLES
otfdata = t_otfdata
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
OTHERS = 5.
DATA: BEGIN OF t_otfdata2 OCCURS 0.
INCLUDE STRUCTURE solisti1.
DATA: END OF t_otfdata2.
Move OTF data to another table with lenght 255
LOOP AT t_otfdata.
CONCATENATE t_otfdata-tdprintcom t_otfdata-tdprintpar INTO t_otfdata2.
APPEND t_otfdata2.
ENDLOOP.
Convert OTF format to PDF
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
format_src = 'OTF'
format_dst = 'PDF'
devtype = 'PRINTER'
FUNCPARA =
len_in = len_in
IMPORTING
len_out = len_out
TABLES
content_in = t_otfdata2
content_out = t_pdfdata
EXCEPTIONS
err_conv_failed = 1
OTHERS = 2.
Have a look at Progs. RSTXPDF4 and RSTXPDFT2 for converting the Spool to PDF.
Regards,
Raj
Message was edited by: Rajasekhar Dinavahi
Message was edited by: Rajasekhar Dinavahi -
To convert ALV Grid to PDF format
Hi Experts,
We have a requirement where in the output in ALV grid display should be downloaded to PDF format.
We came across two processes.
1. To download the output to Smartform and then convert to PDF format
2. To send the ALV output directly to spool and then convert it to PDF
Please let me know which of the above two gives better performance and also please guide me through the process.HI Mallika,
Both the ways are feasible. For conversion of ALV to PDF,
1. Display ALV output as usual using factory method .
2. Create a Button 'Download to PDF' in the GUI status
3. Set the Sy-batch as 'X'.
4. Call the Factory method for list display
5. Catch the sy-spono
6. Use the FM CONVERT_ABAPSPOOLJOB_2_PDF to convert alv data to PDF.
7. Use the FM GUI_DOWNLOAD to dowload the above PDF file -
Hi Experts,
I have written a classical report with write statements and when i am downloading in excel the format is mismatching and now i want to convert into PDF format.
How to convert into PDF format from Classical report ?
YusufHi yusuf,
please find the below report,,
please make two include programs before executing it,
there codes are pasted below,
INCLUDE zimpr_data_declaration.
INCLUDE zimpr_performs_wrap.
REPORT zimpr_word_wrap NO STANDARD PAGE HEADING LINE-SIZE 115..
INCLUDE for DATA DECLARATION *
INCLUDE zimpr_data_declaration.
INCLUDE for all performs. *
INCLUDE zimpr_performs_wrap.
TOP-OF-PAGE--
TOP-OF-PAGE.
PERFORM f_top_page. "TOP OF THE REPORT PAGE,I.E. HEADER.
START-OF-SELECTION.
SET PF-STATUS 'SEL_SCREEN'. "PF-STATUS OF THE SELECTION SCREEN.
PERFORM f_data_retrieval. "PERFORM FOR ALL SELECT STATEMENTS.
PERFORM f_report_display. "REPORT DISPLAY,WRITE STATEMENTS.
--Define the actions to be performed for pf-status-----
AT USER-COMMAND.
wf_ok_code = sy-ucomm.
wf_save_ok = wf_ok_code.
CLEAR wf_ok_code.
CASE wf_save_ok.
WHEN 'PDF'. "WHEN PDF ICON IS CLICKED,REPORT WILL CONVERT INTO PDF.
loc_repid = sy-repid. "PROGRAM NAME
--THIS FM SETS THE PARAMETERS FOR LAYOUT OF PDF OUTPUT--
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
layout = loc_paart "LANDSCAPE LAYOUT
line_size = loc_linsz "CHARACTER WIDTH OF REPORT
no_dialog = 'X'
user = sy-uname "USERNAME
IMPORTING
out_parameters = loc_print_parms "OUTPUT PARAMETERS WILL BE COLLECTED HERE.
valid = loc_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
--FOR GENERATING THE SPOOL NUMBER--
NEW-PAGE PRINT ON NO DIALOG PARAMETERS loc_print_parms. " This allocates the spool no
"to the screen without the dialog screen.
PERFORM f_top_page.
PERFORM f_report_display.
NEW-PAGE PRINT OFF. "This marks the end of the screen for which the spool no was generated.
wf_id = sy-spono. " This assign the spool no of the screen to the variable.
--PERFORM FOR GETTING THE PDF OUTPUT--
PERFORM f_pdf_display.
--PERFORM FOR DOWLOADING FILE TO A LOCAL DISK--
PERFORM f_download_local.
WHEN 'BACK'.
LEAVE PROGRAM.
ENDCASE.
include data declaration----
*& Include ZIMPR_DATA_DECLARATION
TYPE-POOLS : shlp.
DATA : wf_ordert TYPE aufk-auart. "ORDER TYPE
DATA : wf_order TYPE aufk-aufnr. "ORDER NUMBER
DATA : wf_bdate TYPE afko-gstrp. "BASIC START DATE
DATA : wf_status(4) TYPE c ."rihea-i_astatin. "STATUS
DATA : wf_objnr TYPE jest-objnr VALUE 'OR%'. "Object number
DATA : wf_aufnr TYPE aufk-aufnr.
DATA : wf_name TYPE thead-tdname. "NAME TO PASS IN FM READ_TEXT
DATA : wf_date1(12) TYPE c. "DATE
DATA : wf_i1(3) TYPE n,wc_i1(3) TYPE n VALUE '1'. "COUNTERS FOR REPORT DISPLAY
DATA : wf_i2(3) TYPE n,wc_i2(3) TYPE n VALUE '1'.
DATA : wf_kopf TYPE tdid VALUE 'KOPF',wf_aufk TYPE tdobject VALUE 'AUFK'.
DATA : wf_save_ok TYPE sy-ucomm ,wf_ok_code TYPE sy-ucomm.
DATA: wf_id TYPE tsp01-rqident , " For storing Spool request number
wf_bytes TYPE i . " For storing the bytes of data to be converted to PDF.
DATA : wf_langu(2) TYPE c VALUE 'EN'.
DATA: wf_pripar TYPE pri_params, " Structure for Passing Print Parameters
wf_rcpar TYPE arc_params. " ImageLink structure
DATA : wf_statu TYPE dfies-fieldname VALUE 'STATUS',
wf_field TYPE help_info-dynprofld VALUE 'S_STATUS'.
&--SELECTION SCREEN--
SELECTION-SCREEN BEGIN OF BLOCK b_1 WITH FRAME TITLE text-000.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: s_ordert FOR wf_ordert . "ORDER TYPE
SELECT-OPTIONS: s_order FOR wf_order OBLIGATORY. "ORDER NUMBER
SELECT-OPTIONS: s_bdate FOR wf_bdate. "BASIC START DATE
SELECT-OPTIONS: s_status FOR wf_status matchcode object zei_sys . "SYSTEM STATUS
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN END OF BLOCK b_1.
*--INTERNAL TABLES--
TYPES : BEGIN OF ty_aufk,
aufnr TYPE aufk-aufnr, "OREDR NUMBER
auart TYPE aufk-auart, "ORDER TYPE
objnr TYPE aufk-objnr, "OBJECT NUMBER
ktext type aufk-ktext, "SHORT TEXT
gstrp TYPE afko-gstrp, "BASIC START DATE
END OF ty_aufk.
TYPES : BEGIN OF ty_tj02t,
objnr TYPE aufk-objnr, "OBJECT NUMBER
txt04 TYPE tj02t-txt04, "STATUS
istat TYPE tj02t-istat, "Object status
spras TYPE tj02t-spras, "LANGUAGE KEY
END OF ty_tj02t.
TYPES : BEGIN OF ty_temp,
objnr TYPE aufk-objnr,
status(300) TYPE c,
END OF ty_temp.
TYPES : BEGIN OF ty_wrap,
line(54) TYPE c, "LONG TEXT
END OF ty_wrap.
TYPES : BEGIN OF ty_wrap2,
line(25) TYPE c, "STATUS
END OF ty_wrap2.
TYPES : BEGIN OF ty_f4,
txt04 TYPE tj02t-txt04,
txt30 TYPE tj02t-txt30,
END OF ty_f4.
types : begin of ty_sta,
istat type tj02t-istat,
objnr type jest-objnr,
end of ty_sta.
data : int_sta type table of ty_sta with header line.
DATA : int_f4 TYPE TABLE OF ty_f4 WITH HEADER LINE.
DATA: int_pdf TYPE TABLE OF tline WITH HEADER LINE. "TABLE FOR PDF CONVERSION
DATA: int_wrap TYPE TABLE OF ty_wrap WITH HEADER LINE. "TABLE FOR LONGTEXT
DATA: int_wrap2 TYPE TABLE OF ty_wrap2 WITH HEADER LINE. "TABLE FOR STATUS
DATA: int_temp TYPE TABLE OF ty_temp WITH HEADER LINE. "Table for concatenation of system status.
DATA: int_aufk TYPE TABLE OF ty_aufk WITH HEADER LINE.
DATA: int_tj02t TYPE TABLE OF ty_tj02t WITH HEADER LINE.
DATA: int_tline TYPE STANDARD TABLE OF tline WITH HEADER LINE. "TABLE FOR READ_TEXT.
DATA : int_fld TYPE TABLE OF dfies ,wa_fld LIKE LINE OF int_fld. " Field Type for FM for F4 help
DATA :int_return TYPE TABLE OF ddshretval WITH HEADER LINE .
DATA:
loc_print_parms LIKE pri_params, "PRINT PARAMETERS
loc_valid(1) TYPE c,
loc_file type SDOK_CHTRD,
loc_bytecount TYPE i, "NUMBER OF BYTES TRANSFERRED
loc_length TYPE i, "LINE-LENGTH
loc_rqident LIKE tsp01-rqident, "SPOOL NUMBER
loc_rq2name(12) TYPE c.
DATA: loc_filename LIKE rlgrap-filename. "FILENAME
DATA:loc_repid LIKE sy-repid, " Report to execute
loc_linsz LIKE sy-linsz VALUE 115, " Line size
loc_paart LIKE sy-paart VALUE 'X_65_132'. " Paper Format
Include ZIMPR_PERFORMS_WRAP----
*& Include ZIMPR_PERFORMS_WRAP
*& Form f_top_page
top-of the page
--> p1 text
<-- p2 text
FORM f_top_page .
*--HEADER--
FORMAT COLOR 1 .
WRITE : text-010.
FORMAT COLOR 1 OFF.
WRITE : / text-011,sy-datum NO-GAP.
WRITE : / text-012,sy-uzeit NO-GAP,90 text-013,101 sy-uname.
ULINE .
FORMAT COLOR 1 INTENSIFIED OFF .
WRITE : 1 sy-vline, "HEADINGS
2 text-014 NO-GAP,
7 sy-vline,
8 text-015 NO-GAP,
20 sy-vline,
21 text-016 NO-GAP,
76 sy-vline,
77 text-017 NO-GAP,
88 sy-vline,
89 text-018 NO-GAP,
115 sy-vline.
WRITE : /1 sy-vline,
2 text-019 NO-GAP,7 sy-vline,
20 sy-vline,76 sy-vline,77 text-020 NO-GAP,88 sy-vline,115 sy-vline.
ULINE.
FORMAT COLOR 1 OFF.
ENDFORM. " f_top_page
*& Form f_data_retrieval
select statements
--> p1 text
<-- p2 text
FORM f_data_retrieval .
SELECTING ORDER TYPE,ORDER NO.,OBJECT NO. AND BASIC START DATE
SELECT p~aufnr
p~auart
p~objnr
p~ktext
r~gstrp
FROM ( aufk AS p INNER JOIN afko AS r ON raufnr = paufnr )
INTO TABLE int_aufk
WHERE p~aufnr IN s_order AND
p~auart IN s_ordert AND
r~gstrp IN s_bdate AND
p~objnr LIKE wf_objnr.
IF sy-subrc <> 0.
MESSAGE s101(zipm). "no values found for selection criteria.
STOP.
ENDIF.
SORT int_aufk BY aufnr.
DELETE ADJACENT DUPLICATES FROM int_aufk.
SELECT q~istat
p~objnr
FROM ( jest AS p INNER JOIN tj02t AS q ON pstat = qistat )
INTO TABLE int_sta
FOR ALL ENTRIES IN int_aufk
WHERE p~objnr = int_aufk-objnr
AND q~txt04 IN s_status and
q~spras = wf_langu and
p~inact = ''.
IF sy-subrc <> 0.
MESSAGE s101(zipm). "no values found for selection criteria.
STOP.
ENDIF.
SORT int_sta BY objnr.
DELETE ADJACENT DUPLICATES FROM int_sta.
*--SELECTING OBJECT NO.,STATUS AND LANGUAGE--
IF int_sta[] IS NOT INITIAL.
SELECT p~objnr
q~txt04
q~istat
q~spras
FROM ( jest AS p INNER JOIN tj02t AS q ON pstat = qistat )
INTO TABLE int_tj02t
FOR ALL ENTRIES IN int_sta
WHERE p~inact = '' AND
p~objnr = int_sta-objnr AND
q~spras = wf_langu AND
q~txt04 IN s_status AND
p~objnr LIKE wf_objnr.
IF sy-subrc <> 0.
MESSAGE s101(zipm). "no values found for selection criteria.
STOP.
ENDIF.
ENDIF.
ENDFORM. " f_data_retrieval
*& Form f_report_display
report display
--> p1 text
<-- p2 text
FORM f_report_display .
LOOP AT int_tj02t. "concatenating the status into a internal table
AT NEW objnr.
CLEAR int_temp-status.
ENDAT.
CONCATENATE int_temp-status int_tj02t-txt04 INTO int_temp-status SEPARATED BY space.
AT END OF objnr.
int_temp-objnr = int_tj02t-objnr. "key field.
APPEND int_temp.
CLEAR int_temp.
ENDAT.
CLEAR int_tj02t.
ENDLOOP.
LOOP AT int_aufk.
CONCATENATE sy-mandt int_aufk-aufnr INTO wf_name . "concatenating client number and order number
*--THIS FM CAPTURES THE LONG TEXT AND STORES IT IN INTERNAL TABLE--
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = wf_kopf "TEXT ID
language = sy-langu "LANGUAGE
name = wf_name "TEXT NAME
object = wf_aufk "TEXT OBJECT
TABLES
lines = int_tline "LINES OF LONG TEXT.
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
int_tline-tdline = int_aufk-ktext.
APPEND int_tline.
CLEAR :int_tline.
ENDIF.
LOOP AT int_tline.
*--THIS FM WRAPS THE LONG TEXT INTO 54 CHARACTERS EACH--
CALL FUNCTION 'RKD_WORD_WRAP'
EXPORTING
textline = int_tline-tdline "LONG TEXT LINE
outputlen = 54 "OUTPUT LENGTH
TABLES
out_lines = int_wrap "INTERNAL TABLE
EXCEPTIONS
outputlen_too_large = 1
OTHERS = 2.
IF sy-subrc <> 0.
CLEAR :int_tline.
ENDIF.
ENDLOOP.
*-- THIS FM WRAPS THE STATUS INTO 25 CHARACTERS EACH--
READ TABLE int_temp WITH KEY objnr = int_aufk-objnr.
CALL FUNCTION 'RKD_WORD_WRAP'
EXPORTING
textline = int_temp-status
outputlen = 25
TABLES
out_lines = int_wrap2
EXCEPTIONS
outputlen_too_large = 1
OTHERS = 2.
IF sy-subrc <> 0.
CONTINUE.
ENDIF.
IF NOT int_wrap2[] IS INITIAL.
ULINE AT (115).
ENDIF.
DESCRIBE TABLE int_wrap LINES wf_i2. "COUNTING THE NO. OF LINES FOR TABLE INT_WRAP
DESCRIBE TABLE int_wrap2 LINES wf_i1. "COUNTING THE NO. OF LINES FOR TABLE INT_WRAP2
WHILE ( wc_i1 LE wf_i1 OR wc_i2 LE wf_i2 ).
IF ( wc_i2 LE wf_i2 ).
READ TABLE int_wrap INDEX wc_i2 . "READING THE INTERNAL TABLE INT_WRAP WITH INDEX
wc_i2 = wc_i2 + 1.
ENDIF.
IF ( wc_i1 LE wf_i1 ).
READ TABLE int_wrap2 INDEX wc_i1 . "READING THE INTERNAL TABLE INT_WRAP2 WITH INDEX
wc_i1 = wc_i1 + 1.
ENDIF.
*--THIS FM CONVERTS THE DATE FROM SYSTEM FORMAT TO OUTPUT FORMAT--
CALL FUNCTION 'CONVERSION_EXIT_SDATE_OUTPUT'
EXPORTING
input = int_aufk-gstrp
IMPORTING
output = wf_date1.
IF NOT int_wrap2[] IS INITIAL .
*--REPORT DISPLAY--
WRITE : /1 sy-vline, 2 int_aufk-auart COLOR = 4 INTENSIFIED OFF NO-GAP ,
7 sy-vline ,8 int_aufk-aufnr COLOR = 4 INTENSIFIED OFF NO-GAP,
20 sy-vline,21 int_wrap-line,
76 sy-vline ,77 wf_date1 ,
88 sy-vline ,89 int_wrap2-line,
115 sy-vline.
*--CLEARING THE VARIABLES--
wf_date1 = ''.
CLEAR: int_aufk,int_temp,int_wrap2-line,int_wrap-line.
ENDIF.
ENDWHILE.
wc_i1 = 1.
wc_i2 = 1.
CLEAR :int_wrap,int_wrap2.
REFRESH : int_wrap,int_wrap2,int_tline.
ENDLOOP.
ULINE AT (115).
ENDFORM. " f_report_display
*& Form F_PDF_DISPLAY
pdf conversion
--> p1 text
<-- p2 text
FORM f_pdf_display .
*--THIS FM CONVERTS THE SPOOL REQUEST INTO PDF REPORT--
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = wf_id "SPOOL NUMBER
no_dialog = space
pdf_destination = 'X'
IMPORTING
pdf_bytecount = loc_bytecount "NUMBER OF BYTES TRANSFERRED
TABLES
pdf = int_pdf "TABLE FOR PDF REPORT
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
ENDFORM. " F_PDF_DISPLAY
*& Form f_download_local
download to local system
--> p1 text
<-- p2 text
FORM f_download_local .
---------------------THIS FM DOWNLOADS THE PDF REPORT INTO LOCAL MACHINE
data loc_ret TYPE iwerrormsg.
CALL FUNCTION 'IW_C_GET_SAPWORKDIR'
IMPORTING
SAPWORKDIR = loc_file
ERROR_MSG = loc_ret
loc_filename = loc_file.
if loc_ret is initial.
concatenate loc_filename '\work order header long text_ ' sy-timlo '.pdf' into loc_filename.
endif.
CALL FUNCTION 'DOWNLOAD'
EXPORTING
bin_filesize = loc_bytecount "NO. OF BYTES
filename = loc_filename "DEFAULT FILE NAME
filetype = 'BIN'
IMPORTING
act_filename = loc_filename
TABLES
data_tab = int_pdf.
ENDFORM. " f_download_local
if you have any doubts,,
please revert
Regards,
Talwinder -
I have a problem in converting smartform output to pdf format.
Hi,
While converting the smartform output to pdf format.
It is showing this error.
otf end command // missing in otf data.
I have used this function.
Assigning the OTFDATA to OTF Structure table
CLEAR gt_otf.
gt_otf[] = gs_otfdata-otfdata[].
Convert the OTF DATA to SAP Script Text lines
CLEAR gt_pdf_tab.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = gv_bin_filesize
TABLES
otf = gt_otf
lines = gt_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Please help me in this regard. Thanks in advance.Hi ,
I am getting this exception "err_conv_not_possible"
CALL FUNCTION f_name " '/1BCDWB/SF00000092'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = st_control_parameters
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = st_output_options
USER_SETTINGS = 'X'
ZST_TEXTSYMBOLS = ZST_TEXTSYMBOLS
wa_kna1 = wa_kna1
wa_claim_header = wa_claim_header
IMPORTING
DOCUMENT_OUTPUT_INFO = st_document_output_info
JOB_OUTPUT_INFO = st_job_output_info
JOB_OUTPUT_OPTIONS = st_job_output_options
TABLES
IT_CLAIM_VERSION = IT_CLAIM_VERSION
IT_CLAIM_ITEM = IT_CLAIM_ITEM
IT_CLAIM_PARTNER = IT_CLAIM_PARTNER
IT_FINAL = IT_FINAL
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
USE_OTF_MC_CMD = 'X'
ARCHIVE_INDEX =
IMPORTING
BIN_FILESIZE = v_bin_filesize
TABLES
OTF = st_job_output_info-OTFDATA[]
DOCTAB_ARCHIVE = it_docs
LINES = it_lines
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
HERE when i tried to debug it i got SY-SUBRC = 1.
Please help me in this regard. Thanks in advance. -
Small font size in converting spool request to pdf format
Dear All,
Every month after payroll run, the payslips are converted to pdf format with the help of standard program 'RSTXPDFT4'. But now when we are converting the file to pdf, the font size is coming too small to be read, though there is no truncation of data. No changes have been made recently and earlier it used to work fine.
Please suggest how do I rectify this problem.
Regards,
KanupriyaHi Soumyaprakash,
Earlier when % size of pdf was 75 then also we got a clear view but now we have to go as high as 150% to get it readable. Even the printout is not readable.
Please let me know how to check the font size. Also could this problem be due to some Basis setting?
Regards,
Kanupriya -
How to convert spool request to pdf format (to send mail) - SAP 3.1H
Hi,
I am working in 3.1H version. How to convert spool request into pdf cormat to send a mail?. Spool request is in TEXT format.
regards,
sundaram J.Hi sundaram,
1. I suppose u know how to send
mail with attachment.
2. If that is the case,
then no need to do anything.
3. Bcos
There is setting in SCOT,
for INTERNET
ABAP List ---> PDF
Raw TEXT -
PDF
(Your basis team will help u)
4. text data will get automatically converted
to pdf and get mailed.
regards,
amit m. -
Convert Web Page to PDF formatting problem - 1st line of each paragraph outdented
Hi Folks,
I get a formatting problem when I convert any web page to PDF using the 'Convert Web Page to PDF' option - the 1st line of each paragraph is outdented.
eg if i convert http://helpx.adobe.com/acrobat/using/whats-new-acrobat-xi.html I get this:
I get the same problem using IE 9, Chrome (latest) or Firefox 30.0. I don't get it converting a Word doc to PDF.
I'm using Adobe Acrobat XI Pro on a PC running Windows 7.
Is there a simple setting somewhere I am missing?
Any help much appreciated!Are you using "Adobe PDF" or "PDF or XPS?" I sounds like "Adobe PDF," but trying to be sure. Have you updated your Acrobat to the latest version? If not, try that.
-
How to convert Smart Form into PDF format and return the result in BAPI?
I want to convert a Smart Form into PDF format and return the result in BAPI.
can anyone tell me how it can be done with related example
regards
pranayhi,
smart form to pdf--
All you have to do is call your SF to get OTF and then concert it to PDF. Works like charm:
DATA: p_output_options TYPE ssfcompop,
p_control_parameters TYPE ssfctrlop.
p_control_parameters-no_dialog = 'X'.
p_control_parameters-getotf = 'X'.
CALL FUNCTION v_func_name "call your smartform
EXPORTING
output_options = p_output_options
control_parameters = p_control_parameters
IMPORTING
job_output_info = s_job_output_info.
call function 'CONVERT_OTF_2_PDF'
tables
otf = s_job_output_info-otfdata
lines = t_pdf
and if u need more u can check below links also
Check the below links..
Re: Smartforms to PDF
Re: smartform (otf) as pdf and sending as email-attachment
VISIT THIS LINK
Re: Smartforms to PDF
PLZ REWARD POINTS IF IT HELPS YOU
rgds
anver -
How to convert Labview document into PDF format
Hi! can any one tell me, can we convert the Labview document (Labview saved files)into PDF format. I wanted to convert it using a VI. If any one suggest me or send me the example vi i will be very thankful.
Regards
Ramesh.CHi,
We have a brand new PDF library for LabVIEW. Release date is in october. The library can create pdfs, with all kinds of text writing and picture stuff. It works stand alone, so there is no need for other programs. It should also be platform independend.
If your interested, drop me a mail. I can send you mail when it's released. Maybe we can give you a "beta test", if you send use your findings.
Regards,
Wiebe. (email is " my name " @ carya . nl )
"Ramme" <[email protected]> wrote in message news:[email protected]..
Hi! can any one tell me, can we convert the Labview document (Labview saved files)into PDF format. I wanted to convert it using a VI. If any one suggest me or send me the example vi i will be very thankful. RegardsRamesh.C -
I understand how to convert a file to PDF format, but not how to then send it as an attachment
How to you retrieve and attach a file which has been converted to PDF format to an email?
I don't really understand your question since you don't say whether you are trying to send to or from iPad. However on the assumption that you want to send from iPad, if you have Pages on your iPad then you can just go to the "My Documents" screen of Pages and then choose the leftmost icon at the bottom that has an arrow out of it, then choose email document and select whether you want to email it as a pdf, word or pages document.
-
Convert Office Word to PDF format
Greetings,
I want to convert my resume which is in office word 2007 & convert it to PDF format, which is more secure.
I am running Adobe 9 - free versionThanks for the info. I am disappointed to learn that automatic bookmark creation wasn't ever available on the Mac. Who knew that there are actually disadvantages of the Mac vs. Windows? :-)
Are there any other ways (third-party apps, for example), to automatically create bookmarks from heading styles in a Word document?
Cheers! -
How do I convert an iBook to pdf format?
also, if it is not possible, does anyone know if\when Apple will allow us to convert an iBook to pdf? IE with an update to iBooks.
It's not up to Apple, iBooks are licenced content whcih have to be wrapped in DRM at the request of the publsihers.
Allowing converting to PDF would effectiively circumvent that DRM.
Maybe you are looking for
-
SAPbobsCOM and C# multithreading
I'm writing a web application which updates objects in SAP BO. It works perfect except it's taking forever to setup the connection to SAP and update the objects. So I thought to create a background thread to handle the update to SAP while the active
-
How to specify Sql Loader input file with dynamic name
The input file name likes pochange_YYYYMMDD.dat which is generated by other program each day. I want to load this file to a table. Any help? Thanks a lot
-
Help with HardwareTest error code - 2GMC/3/13 :Built-In
hello, I have an IMac 20" 2.0ghz G5 PPC I'm not sure if it qualifies for the repair programme, my mac has an EMC number 2056 and often freezes when waking up or trying to goto sleep. hardware test in normal mode runs through ok but in extended mode a
-
always show publish error "an error occurred while publishing file /Web/Sites/xxxx" and I can not find any problem. Please help. Thanks, Chris
-
Today when I started firefox, I was greeted to a version update screen. I also noticed that my bookmarks toolbar was reset to an old set of bookmarks that I previously used with the foxmarks add on. After I had removed foxmarks, I changed my bookmark