COPA and PCA reports at Operating Conern level

Hi,
As I know COPA reports lie on Operating conern level, how about PCA report? is it at Operating concern or controlling area level?
Thanks a lot!
Cheers,
Helen

Hi,
As far as i know COPA is config at a operating concern level but the reporting can be done at company code or even a product or customer of a company code.
PCA is more at a controlling area level.
regards,
SGP

Similar Messages

  • Difference in Price per unit and Standard cost between COPA and PCA

    Hi
    I did a comparison between COPA and PCA for January. For few products,there is a difference in the Standard cost and PPU between the two reports(product wise). What might possibly be the reason for the difference. And how to analyze the root cause of this difference.
    Thanks
    Jaswanth

    Hi
    By PPU - Do you mean PUP i.e. Per Unit Price of Material Ledger??
    If yes, then you are not comparing apple to apple.. Std cost is bound to be diff than actual cost
    br, Ajay M

  • Reformat COPA and ECPCA reports

    I have been assigned to reformat existing COPA report ( Tcode ke30 and ECPCA ( tcode ke80 ) report. Both the reports are drill down reports and were done using report painter. Since i have had very less experience with drill down reporting i would appreciate if someone understands and guides me for the same.
    Thanks
    Dev

    Hi Dev,
    Please check this drilldown reporting document and perhaps it may help.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAREP/CAREP.pdf
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • PS CS5 Save for Web and Devices reports "The operation could not be completed"  ?

    I teach in a lab of 27 computers, 110 students and part of the curriculum is teaching students to "Save for Web and Devices" this year for some strange reason none of my students can access "Save for Web and Devices"  they get the error message "The operation could not be completed-A write permissions error has occured."
    It has stumped our district top network support guru.
    We are running PS CS5 12.0.4
    He tried this posted fix but it did not work
    http://involution.com/2010/06/13/adobe-photoshop-cs5-write-perimissions-error-on-snow-leop ard/
    It worked once last Friday but today it failed, I'm getting very nervous about being able to prepare my students for the ACA exam without this function.
    In a discussion forum they suggested "zipping and deleting" the save for web preferences, I tried that.  Shut down Photoshop reopened it and that did not work.
    I am at a loss.  Seems like a bug.
    Any ideas.
    We are using iMacs running  Mac OS X  10.5.8

    The error message may not simply address the location to where the students will save a single file. The error likely applies to the temporary location where the various optimized versions might be automatically saved as you preview the image as JPG/PNG/GIF. I would wager that you would not see this error when you are logged into one of the students' computers as an admin.

  • Purpose of KEAT and KEAW reports

    Can someone please explain the purpose of KEAT and KEAW reports in COPA?
    I understand that KEAT is used for reconciling COPA with SD and FI and KEAW is for reconciling CO with PS and Sales Orders, CO with COPA and CO with FI.
    I would like to know in detail what exactly is compared for the two reports..
    Are these reports built for Account based or Costing based COPA or both?
    Edited by: Pete on Apr 1, 2010 9:34 PM

    Hi,
    KEAT is meant to detect customizing errors for single billing documents by checking the reconciliation between SD, COPA, PCA and FI.   The KEAT report checks  billing documents and verifies that these have been posted to FI ,COPA and PCA.
    If a value has been billed, the system reads the billing document and from the SD condition type finds what GL Accounts should be posted to.
    KEAW is meant to check the customizing errors for orders
    regards
    Waman

  • Opening and closing Stock report at Storage location level- date wise

    Dear all
    Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
    Thanks
    Sam

    Do  I have the option of  selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
    pls gudie
    sam

  • Planning at daily level and weekly reports ?

    Dear Experts,
    Will be advisable to do Planning at daily level and weekly reports in 7.5 NW?
    Any body did these kind of project earlier ? Kindly provide suggestions / recommendations please...
    Thank you,
    Kumar

    Hi Kumar,
    We had done a planning at the daily level. However, the scope was also small for this planning scenario.
    The main point is that in case of daily planning, the volume of the data might get too high. Any complex manipulation of the data might take a longer time due to the huge volume of the data.
    Hope this helps.

  • Database version and patchset applied from the operating system level in so

    How to find out the database version and patchset applied from the operating system level in solaris?

    [oracle@rac1 udump]$ cd $ORACLE_HOME/OPatch/
    [oracle@rac1 OPatch]$ pwd
    /u01/app/oracle/product/10.2.0/db_1/OPatch
    [oracle@rac1 OPatch]$ export ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
    [oracle@rac1 OPatch]$ ./opatch lsinventory
    Invoking OPatch 10.2.0.1.0
    Oracle interim Patch Installer version 10.2.0.1.0
    Copyright (c) 2005, Oracle Corporation. All rights reserved..
    Oracle Home : /u01/app/oracle/product/10.2.0/db_1
    Central Inventory : /u01/app/oracle/oraInventory
    from : /u01/app/oracle/product/10.2.0/db_1/oraInst.loc
    OPatch version : 10.2.0.1.0
    OUI version : 10.2.0.1.0
    OUI location : /u01/app/oracle/product/10.2
    Edited by: rajeysh on Jul 31, 2010 1:19 AM

  • Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

    Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
    I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

    Hi,
    What’s your Outlook account? Exchange account or some other Internet email accounts?
    This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
    http://support.microsoft.com/kb/2231628
    If the issue persists, please create a new Outlook profile and add the email account to have a try:
    http://support.microsoft.com/kb/829918
    Regards,
    Winnie Liang
    TechNet Community Support

  • PSV3 Business Information Report - comparing at Group level and Type level

    Good afternoon folks
    I am getting some instances where the summation of the hours for the "Business Event Information" report for a specific business event, when I run it at Event Group level is incorrect; however when run at Event Type level it is correct.
    Eg: business event 50135548 has a schedule of 2 hours.
    When I run the Business Event Information report at event type level it shows 2 hours for this specific event; however when I run it at Event Group levle it shows 120 hours for this specific event.
    Can anybody suggest as to why this is happening.
    Many thanks
    Dawn

    You could do this like this, I think:
    If Sum ({@total}, {@monthName}) = 0 Then
        0
    Else
        Sum ({@Unscheduled}, {@monthName}) / Sum ({@total}, {@monthName}) * 100;

  • COPA and BSEG-SGTXT

    We have postings that are happening in FI, and the users are populating the text fields on these postings.  Is there a way to pass this text field over to COPA to bring into reporting and display of documents in that module?

    Your question is more appropriate for the ERP Financials - Controlling forum, but I don't have authority to move it.  So I'll go ahead and try to give you an answer here.  But keep that in mind when posting about CO-PA in the future since a larger audience will be found at the other [forum|SAP ERP Financials - Controlling; This requirement is an unusual request and the only way I think it could be possible is as follows.
    1 Define a new characteristic (KEA5) with the option "No check" data validation so that no master data would be expected in CO-PA (KES1).
    2 Add this new characteristic to your operating concern (KEA0) and activate and generate the operating concern.
    3 Utilize COPA enhancement COPA0005 (SMOD) by defining an enhancement project in (CMOD) and calling the function module EXIT_SAPLKEII_002 and programming your logic to read SGTXT from include INCLUDE ZXKKEU08.  (Notice that use of enhancement COPA0005 is not related to CO-PA derivation (KEDR), rather it is a way to directly modify the CO-PA data passed by the FI/CO document.
    Here is some relevant documenation on COPA005.
    This enhancement lets you modify how actual data is updated in
    Profitability Analysis via the FI/CO interface.
    Caution!
    Using the components in this enhancement means that you are modifying
    the standard update of actual data from Sales and Distribution (SD),
    Financial Accounting (FI), or Materials Management (MM) to Profitability
    Analysis. To avoid data from being updated inconsistently, you need to
    have a solid understanding of the "FI/CO document" interface!
    Make changes with extreme caution. If unsure, contact SAP!
    The components comprise the following function modules:
    o   EXIT_SAPLKEII_001
    o   EXIT_SAPLKEII_002
    You are responsible for ensuring the consistency of any changes made!
    Test each change made extensively before use in the productive system.
    For further clarification, contact SAP.
    You should strongly consider whether this solution will negatively affect your system performance by growing your segment-level characteristics (table CE4XXXX where XXXX is your operating concern).  You may want to in fact make this new characteristic field a non-segment level characteristic (KEQ3).  This will disable you from viewing this field in summary level CO-PA reports (KE31), but it would available from line item based reports (KE91) or from a custom BW infoprovider which gets line item data.  You could of course use a combination of KE31 reports and KE91 reports by jumping from summary to detail reports and passing the selected characteristics.  This is accomplished via the split report (KE3L) option.
    Best regards,
    [Jeffrey Holdeman|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/jeffrey+holdeman]
    SAP BusinessObjects
    Enterprise Performance Management
    Regional Implementation Group
    Tried to fix the formatting, but unsuccessful.  Edited by: Jeffrey Holdeman on Jul 28, 2009 10:04 PM
    Edited by: Jeffrey Holdeman on Jul 28, 2009 10:10 PM

  • COPA line item report, Number format  -output type - object list(ALV).

    Hi,
    I am preparing COPA line item report. I want to change number format (two decimal place). I did the changes in form level then I did the changes in drill down report as well and saved as save definition.
    But changes are not reflecting in- output type - object list(ALV).
    Please provide help in this.
    Regards

    HI
    What t-code you are using to write this line item report ?

  • Sort field and double click on operations in IW37n?

    Is the person that developed IW37n on drugs?
    If you create a report for listing order operations wouldn't it be a good idea if you could double click on a operation and go directly to the operation and not end up on header level?
    If you have a fields on operations level why don't include those fields in the report?
    87 OSS notes on this report and it's rather new makes me wonder if the quality of the SAP system are declining?

    Kristoffer
    I have to agree with you here.
    A simple change to this report would help the users a great deal if:
    When you double-click on the order number you go to the order header
    When you double-click on the operation number you go to the operations tab (or operations detail)
    There are BADIs to add new fields to IW37N, which fields are you missing?
    Not sure what you mean by 87 OSS Notes though???
    PeteA

  • Line itemwise report for operational WCD

    Hi,
    We are using the Mechanical and process isolations in the operational WCD. one WCD for Mechanical isolation and another one for process isoaltion.
    There are multiple Isolation points used for process isolation. Example: 20 process isolation points in a WCD for a particular equipment.
    The standard list editing operational WCD transaction (WCL4) provides a report which is a single line on the WCD level.
    Where as we are interested to track on the individual line item i.e. individual isolation points status with in a WCD to track how many isolations are tagged, how many are still to be tagged, how many are untagged, how many are closed etc..
    Proposed layout:
    WCD number         Line item #        Status
    30000010              10                    Tag printed
    30000010              20                    Tag printed
    30000010              30                    Tagged
    30000010              40                    Tagged
    30000010              50                    Untagged
    30000010              60                    Untagged 
    Is there any way to enhance the standard report (WCL4) or we need to develop a custom report.
    Thanks in advance.
    Regards,
    Raj

    Hi Harshvrdhan,
    Thanks for your immediate reply.
    I am using the functionality what you have proposed. With WCL4 transaction I can bring all the line items for WCD but the status field is not available hence it is available only on the header level.
    The user has requested that they need line itemwise status report for all the shutdown related WCDs to be downloaded into excel fiel for status monitoring and management reporting purpose.
    However, I was reading one of the document written by Michael lesk i.e. 8103_Function_Enhancements_EN.
    As he mentioned, with SAP EhP5 there are more functionalities available with BADIs for WCM list processing.
    Hopefully by implementing the BADIs mentioned in the document we should be able to get the additional custom fields.
    Special thanks to Uwe Kirchner and Michael lesk for their continuous effort in enhancing the WCM processes and the dedicated user support.
    Regards,
    Raj

  • Sales and Costs Report

    Hi All,
    I have a requirement for a report in which I have to display the "sales" of the last working day and the "costs of sales" for it and also the sales and costs of sales for the total month(i.e from 1st day of the month till last working day).
    I thought to use CO-PA for the costs. Is this the right option or do we have any other data sources which picks up the costs(Will any of the 0CO_OM_* extractors work?)? If the CO-PA is the correct option then which one do I need to use i.e either Cost based or Accounting based? What is the difference between them?
    As the report is at day level does the CO-PA contains Day level data?
    If I have to create this report I think I have to create a multiprovider with the sales and CO-PA cubes? Can we do this?
    By the way, the report is at distribution channel level.
    Awaiting your reply...
    Thanks & Best Rgds,
    Ram.

    Hello Ram,
    As you are telling COPA is not Installed in R/3 there is no need to think on it to implement COPA on BW side.
    Anyway for information on Cost based and Account based COPA, check the following link.
    Re: Costing based Vs Accounting based COPA
    Costing based COPA will follow the method of COST-OF-SALES to analyse.
    Next coming to your requirement of Sales & Costs of Sales..
    Billing Information is sufficient.
    Check with Datasource 2LIS_13_VDITM & BC Infocube for billing.
    this Billing Infocube can give information on Costs of sales, Revenues..
    But if you want to see <b>Costs of Open orders</b> also means you need to fetch data from Sales Order Item Level  also (2LIS_11_VAITM).
    In Nutshell..
    2LIS_13_VDITM - You can use for Costs of Sales & Revenues etc.
    2LIS_11_VAITM - Use it for Cost of Open Orders.
    If you need both Sales & Open Orders Costs means go for Multiprovider (Built based on Billing InfoCube & Sales Order Infocube)
    I hope this infomation helps you.
    Thanks & Regards,
    NK.A
    Dont forget to assign points if useful.

Maybe you are looking for

  • Can I see video stream from a website on my tv from my desktop with apple tv

    I am trying to watch a weekly video stream from a website using my Mac desktop on my tv with Apple Tv..can I do this?

  • How can I copy music from iTunes to a 2nd iPhone 5?

    I have my own iPhone 5 that i have synced and set up with my itunes on my macbook pro.  My wife recently got an iphone 5 (thru her work) that i want to copy music from my itunes library to her phone.  We share the same itunes acct and she is able to

  • Creating Web Services using Java Implementation

    Hi, This is quite a general question on how to create a Web Service using Java Implementation that needs to conform to a client XML schema. Here are my Version specs, I am using Jdeveloper 10.1.3.4.0 and deploying onto OAS 10.1.3. I will be creating

  • File to mail adapter scenario.

    Hi All, i have a file to mail adapter scenario. here i get the data from tthe different vendors and what ever comes in should be validated and  if needed sent as an attachment or detached from the message and then from receiver mail adpter to applica

  • SQL Server 2012 Standard Support for Lync 2013

    Hi, Does SQL 2012 Standard version support Lycn 2013 , I am planning to have following features. 1- SQL 2012 Mirroring 2- Monitoring Role on FE Servers Regards Usman Ghani Usman Ghani - MCITP Exchange 2010