COPA structure cross 50 char-How to add more char fields in the sturcture

Hi SAP CO Guru's,
I am facing one problem in COPA characteristics, I have created the characteristics however in the KEA0 structure where we have already exhaused max limit of 50 char, hence system is not allowing to add these new fields in the structure.
I need help for getting addition 2 fields into structure.
I have one more option where few Char fields are not usable, can be remove from the structure if we can not increase the limit of 50 Char in the structure but system is not allowing me th remove the already selected Char fields.
Thanks in Advance.
Uday Suryawanshi
SAP FICO consultant, Pune

Hi Uday
There is a way you can increase the limit.. refer the note given above
However, SAP wont take the responsibility of any thing that happens later on.. It is completely your headache....
So, better rename the Chars and use them....
If you are still in DEV Client, delete COPA docs posted till now.. refer Note 21207... This helps you to delete a char if posted data exists
I personally would prefer to rename and reuse.. After all, recycling is encouraged these days
Br, Ajay M

Similar Messages

How to add more summary data in the MIP of Compensation workbench

Hi all,
In the MIP (incentive plan) of the compensation workbench, we need to add more summary data in the summary section. I checked that all the summary data in that section are stored in the table 'ben_cwb_summary'.
Even we can change the VIEW object for that page (using extension), we can't retrieve it because the new summary data/information we need to add are not stored in the table 'ben_cwb_summary'. We need to write our query to summerize data.
How to implement it?
Thanks in advanced!
Jane

faiz2000 wrote:
> How to add more one record in the same time?
>
> Please I need your help to add more one record in the
same time, how can I do
> that?
>
> I have only one text field and the value it is linked
from other table, if
> user he bushes bottoms the all data it will copy it to
new record:
>
> Ex.: <input name="textfield" type="text"
>
value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
>
>
Use "Repeat Region"
Mick

CWB: how to add more summary data in the summary section

HI All,
We need to add more summary data in the summary section. Some summary data need to calculated dynamically like (summary data A /summary data B).
under the worksheet, there is a link:
Personalize Dynamic Columns
But this link allows to create Dynamic Columns for the worksheet, but not for summary setion.
Is any way to add more summary data in the summary section through personalization instead of customization (VO extension)?
Thanks in advanced!
Jane

faiz2000 wrote:
> How to add more one record in the same time?
>
> Please I need your help to add more one record in the
same time, how can I do
> that?
>
> I have only one text field and the value it is linked
from other table, if
> user he bushes bottoms the all data it will copy it to
new record:
>
> Ex.: <input name="textfield" type="text"
>
value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
>
>
Use "Repeat Region"
Mick

How to add a standard field to the Product search criteria ?

Hello all,
despite my searches on google and sdn, i'm still confused on how to add a standard field in the search criteria of the Product seach screens (component/view PRD01QR/Search for example) , I mean a standard Product field that is not included in the available fields list in the UI configuration tool.
I found some explanations for adding a specific Z-Field, this is ok , but I'd like to add a standard field as a search criterion, namely the item category group.
Could someone give me the needed detailed steps for this?
thanks
Ludovic

Hi
Chk ths link out :
http://wiki.sdn.sap.com/wiki/display/CRM/Howtoaddanexistingfieldtoasearchpageofadifferent+component
Rgds,
Swati

How to add an input field in the web UI of CRM 2007

Hi everybody.
I want add an Input field in the Web UI Screen. How it is possible.
I want get the information with detailed descriptions if possible with screen shorts.
What type of methods it will be generated and what are the code we entered in those methods.
Take according to any example. But with detailed description.
I am new for the CRM 2007. So, please give the screen shorts with proper data.
Not only adding the field. If any data i entered in the adding field then that will be stored in the tables otherwise no use by adding the field.
So, Can anybody please send a proper information according to this.
Here another one How to Add our own table (Ztable) field in the Web UI Screen.
How to add the same field in the BOL.
Please expalin about those concepts with full of screen shorts messages.
Thank You.
Regards,
Krishna.

If you want to add extra standard fields (like one you mentioned), you can use Component Workbench and Copy the configuration and create your own configuration and make the "Available Fields" appear there.
If the standrd field is not available, you can Add Context Node using wizard and make it visible.
If its a custom field (a new one); you will have to use EEWB and add the fields and then make it visible in the UI using Component Workbench.
Regards,
Alin

How to add a function field into the existing matrix report

Hi,
I have a matrix report , now i wanted to add one moe field into the matrix which is getting the value from a function , this function is a part of the ref cursor query(group) , i'm able to get the value from the function but it cannot display on the existing matrix report. i wanted to add this in the repeating frame which is printing down. how could i do this , looking for your help. thanks . bcj

Here the scenario like,
Data from Table_1
NAME UNITS DAYS RATE
AAA 10 1 1.2
BBB 12 2 3.1
AAA 20 2 4.1
CCC 23 1 5.2
Here, In the matrix report the NAME and UNITS are row fields and 'DAYS' is column field , RATE would be the cell field, and
Data from Table_2 ,
NAME BASIC
AAA 2
AAA 2
BBB 2
CCC 3
In the report i have to display the 'BASIC' along with the NAME in row level ( repeating frame printing down),
To get the multiple 'Basic' for each 'Name' using a ref cursor .
and, using a function to do further calculation based on the basic value
begin
select basic into v_basic where name =:name;
return(caluculated_value);
end;
and return the calculated value to the report. But at that time cannot accommodate the value in the matrix report with other groups frequency.
looking for your valuable help. Thanks Bcj

How to Add a new fields in the selection screen of LDB.

Hi All,
I want to add a new fields in the selection screen of LDB & then i need to select the data for that fields.
So could you please tell me for that where i need to add the code for selecting the data.
Thanks
Roli

Hi
welcome to SDN forum
If you are designing your own LDB with your own tables you can define tree structure and then the selection screen for the tables
if you wants to modify the std LDB of SAp means take the access key and to modify that code
if you add the extra field you have to modify the where conditions in the code also
see the doc
A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
LDB offers an easy-to-use selection screens. You can modify the pre-generated selection screen to your needs. It offers check functions to check whether user input is complete, correct, and plausible. It offers reasonable data selections. It contains central authorization checks for data base accesses. Enhancements such as improved performance immediately apply to all report programs that use the logical database.
Less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
Mainly we used LDBs in HR Abap Programming.
Where all tables are highly inter related so LDBs can optimize the performance there.
Check this Document. All abt LDB's
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fabap%2fabap-code-samples%2fldb+browser.doc
GO THROUGH LINKS -
http://www.sap-basis-abap.com/saptab.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Re: **LDB**
www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
www.sap-img.com/abap/abap-interview-question.htm
www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
Gothru the blog which provides info on LDB's:
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Sample code
TABLES: SPFLI,
SFLIGHT,
SBOOK,
SCARR.
START-OF-SELECTION.
GET SPFLI.
WRITE:/ SPFLI: , SPFLI-CARRID, SPFLI-CONNID,
SPFLI-AIRPFROM, SPFLI-AIRPTO.
GET SFLIGHT.
WRITE:/ SFLIGHT: , SFLIGHT-CARRID, SFLIGHT-CONNID, SFLIGHT-FLDATE.
GET SBOOK.
WRITE:/ SBOOK: , SBOOK-CARRID, SBOOK-CONNID,
SBOOK-FLDATE, SBOOK-BOOKID.
GET SFLIGHT LATE.
WRITE:/ GET SFLIGHT LATE: , SFLIGHT-FLDATE.
Regards
anji

How to add a new Field to the WEB User Interface in CRM 2007

Dear experts,
I have been struggling to add a new field to the (CRM 2007) user interface from available fields for a specific view.
I have maintained settings in BS__WD_CMPWBàRuntime Repository editoràComponentàViewàConfigurationàNew ConfigurationàAvailable FieldsàField Propertiesàand save.
But the field is only appearing in display mode in the Web UI, which doesnu2019t allows any user input.
I need your help to resolve the issue, I would be grateful if you could provide step-by-step documentation with screenshots or any other kind of documentation.
Each suggestion will be appreciated.
Best regards,
Raghu ram.

Hi Raghu Ram,
I think you added a new custom field using some method like EEWB etc.,
Then, you are adding the field onto the UI using UI Configuration Tool .. right ?
These are the steps to diagnose:
Method 1.Check the field properties in the model browser first.
It should be showing 'C' i.e., CHANGEABLE. If it is showing as 'R', it is only READABLE.
In such a case you need to find a BADI to change the field properties.
For example, in Marketing Applications OBJ BADI has a method CHANGE FIELD PROPERTIES for this purpose.
Method 2. Debug and check what is the value coming for RV_DISABLED parameter in the GET_I method in BSP_WD_CMPWB. This should be FALSE.
Method 3. Check what are the field properties in the UI Configuration tool.
Make sure it is not a display only field.
Regards,
Masood Imrani S.

How to add a custom field to the "Projects" page "Group by" data menu list

Hi,
I'm deploying Project Online and I want to group projects by a custom field on the "Projects" page. Currently I can see options for group by Project Name, Start, Finish, % complete etc. I would like to group by a custom field of programme name
which is filled in on the Project Details form.
I can create the enterprise field etc, however I can't work out how to make the new enterprise field appear in this list. Or am I barking up the wrong tree and should be creating separate Project Types for each programme?
Any help an advise greatly appreciated.
Regards,
Conrad

Hello, add the programme field to the Project Center view then it will be available to group by. Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

How to add a new field in the Field Mapping

Dear Freinds,
               I have two un used fields in the Source fields to the Target Fields ,
i have to add the 3   fields which r there in the my source fields to that
of the target fields ( as per the change in the requirement) in the 5th Step
i.e Maintain Field Mapping and Conversion Rules
the Target strucutre & the Source fields( by clicking the button
Source field and selcting the fields from the popup menu) in the mapping and conversion step ,i want to add 3 fields which are availabe in the list of th source list which i want to map to the Target strucutre .
When i tried it is adding in the othe target field
presently i have mapping (5th sept ) as below.
   ZPA30_08                       LSMW
       Fields
           TABNAME                      Table Name
                               Source: ZP0008_STRC-PERNR (Personnel Number)
                               Rule :   Default Settings
                               Code:    ZPA30_08-TABNAME = 'ZPA30_08'.
           TCODE                        Transaction Code
                               Rule :   Default Settings
                               Code:    ZPA30_08-TCODE = 'PA30'.
now i want to add 3 fields Pernr,wage type and Amount , but when iam trying it is
getting and saved in the TABNAME .
How can i map please let me know .
Regards
syamla

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

How to Add a new Field in the Web UI

In CRM.
I want add a fields. How it is Possible.
In WebUI after login. Select BP_SRV_MAIN.
Then Select Manage Reports.
Select New Entry.
Porivide Program Name.
            Short Description.
            Select Service from Drop Down.
Select Tables Radio Button.
Press Next.
It display all available FIelds.
But i want add another some fields into this. How it is possible.
Here i am getting   Component Name as CRMCMP_OR_DTWIZ.
                            View Name as    RptColumns.
So How can i get more fields like ObjectID of CRMD_ORDERADM_H.
Can you please explain me about this. If possible with Screen Shorts.
Thank You.
B. Krishna

If you want to add extra standard fields (like one you mentioned), you can use Component Workbench and Copy the configuration and create your own configuration and make the "Available Fields" appear there.
If the standrd field is not available, you can Add Context Node using wizard and make it visible.
If its a custom field (a new one); you will have to use EEWB and add the fields and then make it visible in the UI using Component Workbench.
Regards,
Alin

How to add a Custom field in the Standard SAP Sales Order main screen

Dear Experts,
We have a requirement of adding a Custom field in the Sales Order screen. I know how to add the Customer field in the Additional data B tab of the Sales Order Header Screen as that is the screen user exit provided by SAP. Can someone tell me how to add the Custom field in the Sales Order main screen. Program Name - SAPMV45A and Screen Number - 4001. What is all I need to take care.
Thanks,
SNK.

I have not added the Custom filed in the main screen and added in the Additional data B screen. So closing the message.

How to add a new field on the right side of 'Part function' in Opportunity

HI All
I have a requirement wherein I need to add a new field for 'first name/last name' on the right side of 'Partner function' field in opportunity search criteria..
Ex:(here i'm showing overview how the search criterial screen appears in UI since i can't attach screen shot)
Partner function is sales lead firstname/lastname
It is similar to...when we select the option 'Is between' for date field then automatically one extra field will appear
on the extreme right to enter a range for the date so similary I need to add one field to the extreme right where
the user will select 'first name/lastname' using 'F4' help in addition the abvoe 'Partner function'.
Could you please let me know how can we add it??
Regards
Anil

Hi,
First try to find out if you already have that field available in your view configuration. If yes, then you just need to add that to visible/displayed fields. Other wise you'd have to extend the context nodes using AET/EEWB. After you add the fields using configuration you can move them where ever you want to place them. I believe for first name/last name F4 comes by default.
Regards
Prasenjit

How to add an extra field in the output of a predefined report

Hi everybody,
I have to add an extra field by name "DAYS"(VTBFHAPO-ATAGE) in the output of a predefined report" RFTMBL01".
please provide me the code and where to add in the predefined report

Hi Pasquale Isolato
the predefined alv report name is "RFTMBL01" . If u r with system please check the code and the field name i have to add ids"DAYS'.
if u are not with system please reply me so that i will sen the code also
Thanks in advance

COPA structure cross 50 char-How to add more char fields in the sturcture

Similar Messages

Maybe you are looking for