Coprocessor drivers missing after window 8.1 installed

coprocessor drivers missing after window 8.1 installed, I have a file to install it when it ran windows 7; and it did install; but will not install drivers off the file now.

morris2672 wrote:
coprocessor drivers missing after window 8.1 installed, I have a file to install it when it ran windows 7; and it did install; but will not install drivers off the file now.
What program are you talking about? Coprocessor is built into the Processor nowdays...
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Similar Messages

Compaq Presario CQ62 DVD not working after Windows 7 automatic install of upgrades

The DVD in my Compaq CQ62 stopped working after Windows 7 automatically installed updates. The driver seems to be corrupted. When I open Device Manager, the DVD comes up as hp DVD RW AD-7701H SATA CdRom Device and the device status displays...A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32).. There are two drivers installed--cdrom.sys from Microsoft, File Version 6.1.7600.16385(win7_rtm.090713-1255) and PxHlpa64.sys File Version 2.03.32a from Sonic Solutions. If anyone knows the link to download the new driver or how to resolve this problem please let me know.

We are not sure what might have caused this issue. You may try removing the affected filter drivers and check. This has helped few.
To do this, follow these steps:
1. Click Start , type regedit in the Start Search box, and then click regedit in the Programs list.
If you are prompted for an administrator password or confirmation, type your password, or click Continue.
2. Locate, and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Caution There can be many instances of the registry subkey that is mentioned in step 2. You must make sure that you are in the appropriate registry subkey before modifying the UpperFilters and the LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the Default data value is DVD/CD-ROM and the Class data value is CDROM.
3. In the right pane, right-click UpperFilters, and then click Delete.
4. Click Yes to confirm the removal of the UpperFilters registry entry.
5. In the right pane, right-click LowerFilters, and then click Delete.
6. Click Yes to confirm the removal of the LowerFilters registry entry.
7. Exit Registry Editor, and then restart the computer.
Note After you remove the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall any affected programs.
See which Windows updates are installed
http://windows.microsoft.com/en-US/windows7/See-which-Windows-updates-are-installed

Drivers Missing After New Graphics Card ?

Recently the graphics card on our Power Mac G4 "MDD" stopped working. For a while, there was an increased fan noise, then just a few days ago, when the computer was turned on, the fan was very loud & the screen was jittery & pixelated before providing an error message & turning off.
We ended up buying a new (refurbished) graphics card -- the same model as was in the computer to begin with: NVidia GeForce4 Titanium TI4600 128MB DVI/ADC.
Today we installed the new card & everything worked great without any errors, screen issues, etc.
However, now we have issues using both our external HD & the iSight (external Firewire camera). First, the Power Mac was not even detecting the External HD (a Western Digital My Book Studio Edition II - 2TB). We then plugged the external HD into our MacBook Pro & it worked as it did before.
Upon further investigation, it seemed that maybe the drivers & managing programs for the WD external HD were missing from the Power Mac. We downloaded & installed those (including an updated firmware) from the Western Digital site. Now the External HD isn't even turning on.. but that's a separate issue that we believe we need to speak with WD about.
Our iSight camera, however, is also not responding & we can't seem to get it to work. We tried to find the drivers for the camera, but have (so far) only been able to find an update for OS X 10.5+
*SO our question is....* are drivers installed/stored on the graphics card?? Why would these things be missing after only switching out the graphics card?
Any help/advice/info would be much appreciated as we are about to pull our hair out!

Hi everyone!
Thanks so much for the help! It didn't make sense to us as that any drivers would be on the graphics card so the suggestions here make a lot more sense.
Before we boot to the OS X install disc and run Disk utility or Disk Warrior, etc.. is there any thing we need to know regarding files on the computer? Is there anything we should or shouldn't do so that we don't need to worry about any possible files being deleted from this procedure?
*A bit more info:* (If this helps) upon further investigation & reading online, we found that somehow the BaseSystem.pkg file was missing. We had all the symptoms mentioned here: http://support.apple.com/kb/TS2023
And we also tried to follow the recommendations regarding getting the computer to recognize the *iSight external camera* found here: http://discussions.apple.com/thread.jspa?messageID=10084429 However, we had no luck. Everything we go through those steps, a window pops up saying no camera is detected even though it is plugged into the Firewire port. We're hoping that following japanmac's suggestions will correct this as well...?

GPU panics after Windows 8.1 install

Hello all,
I am experiencing a "funny" issue though I am not laughing...
Am using a mid-2012 15" Macbook Pro with retina. The hardware is great and I have never had any issues with it. OS X just ***** - in so many ways - and this is my personal preference. I have had plans to install and switch to Windows 8 but never had the motivation. Now, as I recently upgraded to OS X Yosemite, got the dreaded WLAN dropping issue. It is just hilarious how unresponsive Apple has been to that problem... I also have a Macbook Air which has exactly the same issue so... Decided that it is now a perfect time to ditch OS X for good and switch over to Windows on both Macbooks starting with my Pro...
I prepared Bootcamp, Windows 8.1 install media... and did the Windows 8.1 install (still have OS X on another partition). Windows installed fine and worked OK: until I installed Bootcamp drivers. I suspect it is the NVIDIA graphics driver (installed by Bootcamp v 5.1.2) which causes Windows 8.1 to crash. The system may run for a minute or an hour. But, inevitably, it will crash to a black screen.
Now, the funny thing is, once Windows has crashed, it will no longer restart. System will die on Windows startup logo. It gets even funnier when I reboot to boot menu and choose to boot OS X. It crashes in the apple logo boot screen, too! So neither of the OS'es boot! Several boot attempts later (even did cmd+opt+P+R a few times) the OS X finally boots. And reports that there's been a GPU panic fault...
I have now repeated the above mentioned process (installed Windows 8 from scratch, installed graphics drivers, got Windows 8.1 to crash, got both OS'es to crash on boot, got OS X running again after several boot attempts, and - finally - OS X to report GPU Panic). Here I am, just laughing to myself hysterically... What the heck is going on?
I need to add that I have NEVER seen a GPU panic on this Macbook before. There has been absolutely no problems with the hardware - ever. And now, with OS X running again, there are no issues whatsoever.
So does the Bootcamp REALLY work with Windows 8.1 on this HW. And how the heck do I get rid of OS X for good?
Jouko

Just to report back on this issue: solved, but not in the way I would have liked to see.
That friggin' Macbook pro got toast. In age of just 26 months. The GPU is fried. This first surfaced only when running Windows, as it
uses only the external NVIDIA GPU. At first there was no problem running OS X, as my use is not very GPU intensive and most of the time the integrated intel GPU was in use and it shows no problems. Now, a few weeks later, the black screen crashes are frequent in OS X too - whenever Nvidia is switched on.
I am so ****** off with Apple... Have left the Macbook for a "indie repair specialist" to solder in a new GPU. Should that fail the Mac goes straight into dumpster. Needless to say, will never buy another.
Jouko

TPT2 System update problem after Windows 10 clean install

Hello, Today I did clean install of Windows 10 on my Thinkpad tablet 2. Chose "keep nothing" to have fresh new Windows. Then Installed newest ThinkVantage System update app. Hoewever when I tried to search for drivers with this app it failed and I got a messege "There are no applicable packages found for your system". Anyone know how can I solve this problem? Thanks in advance, CR

... just open a command line window ("cmd.exe") with administrative priveliges and run the command "powercfg -sleepstudy". This generates a powercfg-HTML-Report in the "Windows\System32" folder where you can drill down the cause for power draining in connected standby mode. Typically WLAN / Bluetooth driver cause the problems - or applications that run with massive CPU-usage in the background. Are you still logged in into WIndows when you turn off the tablet? Then frist try to lock out of Windows and enter the connected standby mode. Then analyse with the powercfg tool. Afterwards repeat this procedure with your logged in WIndows account. With this approach you can compare the basic windows power drain with the power drain including app usage. Good luck! Bernd

Missing base system drivers zv5000 after windows 7 installation

After installation of windows 7 device manager shows exclaimation point
Hardware id:
PCI\VEN_104C&DEV_8201&SUBSYS_006B103C&REV_01
PCI\VEN_104C&DEV_8201&SUBSYS_006B103C
PCI\VEN_104C&DEV_8201&CC_088000
PCI\VEN_104C&DEV_8201&CC_0880
Also DVD/cd rom will not recognize any of my dvd/cd's but device manager shows device working.
Need help
This question was solved.
View Solution.

Hi,
Looks like very old machine, please try:
http://ftp.hp.com/pub/softpaq/sp29501-30000/sp29788.exe
For CD/DVD drive, please try Run now from the following link:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

CD/DVD Drivers Missing msg when starting newly installed iTunes 11.1.4

I saw this error posted for other versions but none of the solutions have fixed the problem.
The error msg is:
The registry settings used by the iTunes drivers for Importing & Burning CD's & DVD's are missing. This can happen as a result of installing other CD Burning software. Please reinstall iTunes.
First off, I have Roxio installed, but it has been installed for several years and both programs have coexisted without issues until I updated to 11.1.4 two days ago.
When the message appears, I click OK and iTunes opens and appears to work fine, as far as displaying my library and playing music. I ran iTunes diagnostics on the CD drive with a pre-recorded CD and it sees the drive but won't read the CD. (the diagnostic log is below). However if I just insert a CD into the drive, iTunes recognises it and asks if I want to Import it. I did once just to make sure it worked and it did. I can even play the music on the CD with iTunes. However, I cannot Burn a Playlist to a CD.
Here is what I've done so far:
1. Started you the Setup program and ran a Repair. Same error.
2. Uninstalled iTunes using REVO Uninstaller, deleting all files and registry entries. Reinstalled iTunes, same error.
3. Followed the steps for removing iTunes on the iTunes Support web site using the Windows Uninstaller and manual folder deletion. Reinstalled iTunes, same error.
CD-DVD Diagnostic Log:
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Dell Inc. Dell DM061
iTunes 11.1.4.62
QuickTime 7.7.4
FairPlay 2.5.16
Apple Application Support 3.0
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.0.32
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0014B4D00C0B6798
Current user is not an administrator.
The current local date and time is 2014-02-20 16:32:55.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., RADEON X300/X550 Series (Microsoft Corporation - WDDM)
ATI Technologies Inc., RADEON X300/X550 Series Sec (Microsoft Corporation - WDDM)
Intel Corporation, Intel(R) G965 Express Chipset Family
Intel Corporation, Intel(R) G965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.4.62 is currently running.
iTunesHelper 11.1.4.62 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
Obviously I missed something, any suggestions?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Tray icon missing after 3.0 driver install?

After installing the latest boot camp drivers, my boot camp tray icon has gone missing. Anyone else see this phenomenon? Is there any other way to access the boot camp options in Windows?
Edit: reinstalled and the icon appears
Message was edited by: jefisher

This is a stupid windows problem and often occurs if you install Browser based VNC software or use the Bootcamp partition within Parallels or Fusion.
These applications(programs) create their own Special Profiles and at the same time modify the items visible in the Task Bar Tray.
One of the victims is always the Bootcamp switcher.
By the way whats worse is at the same time they can disable the media keys on Apples Wireless Keyboards.
When you switch to Windows it may well boot to the wrong profiles.
On occasion rebooting Windows may actually load the correct profile with the tray icon.(This is however random in my experience)
Worse still if you have to restart Windows in some circumstances it will generate a further set of Profiles.
As a starting point and not foolproof whilst in windows
Right Click My Computer/Computer
Click on the Advanced Tab in System Properties and the setting radio button on under user profiles and see how many profiles are set.
Now delete any multiple and unidentifiable profiles.
Now reboot your Mac within windows and it might just load the base Try items including the Bootcamp switcher.

Internet Loss and Limited Windows Functionality After Windows 7 Clean Install

Hello all,
here is a bit of context. I had an extra Lenovo T410 sitting around so I wanted to restore it to its "factory state" by performing a "format boot". Plan was to boot from CD drive and reinstall Windows 7 (32 bit) during the process. However, disaster, after the process finished I am now stuck in some sort of safe mode (everything is larger than usual) and the computer is missing several drivers. I installed the network adapter driver manually (can identify networks but can't connect to internet). Device manager still lists Base System Device, Ethernet Controller, PCI Serial Port, PCI Simple Communications Controller, and Unknown Device drivers to be out of date.
My objectives here are to 1) restore connectivity to internet and 2) get Windows 7 Home Premium to full functionality.
Thanks for any input!
*Virtual High-Five if you stuck with me through that whole explanation.
Solved!
Go to Solution.

I guessed he doesn't have that option, as he said one of the missing drivers is the ethernet controller.

LJ 3030 Refuses to print more than one copy after Windows 7 is installed

I've had quite a few problems getting my LJ 3030 to print correctly after having installed Windows 7. I believe this is the very last problem and I'm unable to resolve it. Regardless of the number of copies I enter in any program MS Word/Excel, Eudora, PDF, etc. I can only get one copy at a time to print. There is no error message. If I put "10" in the number of copies, it accepts it, but only one copy will print.
I've uninstalled and reinstalled the printer, I've installed the universal driver, but it appears it's just going to ignore all of my attempts and makes me go thru the print box the same number of times as the number of copies I want.
Anyone????
Sandi in Seattle

Try doing an "Add printer," and then, "Windows Update." You should then be able to pick one of the LJ3030 drivers that was added from the Windows update. Choose the same printer port that you used before with the universal print driver.
Although I am an HP employee, I am speaking for myself and not for HP.

Wlan card undetected after windows 7 re install on dell inspiron m5010

i have a problem with the wlan card on my dell inspiron m5010 where it is not detected and the drivers are not being installed and always says "no compatible hardware found. The software you are attempting to install is not supported on this system" even though after putting the service code it says it came with the system. please help me.

Hi,
In the Device Manager, enter the Network Card Properties and provide the Hardware ID of the WLAN card. Also provide the Windows version currently used on the machine.Let me try giving you the right driver.

Comcast/Norton security suite missing after Windows 10 Upgrade

After upgrading my laptop from Windows 8.1 to Windows 10 the Comcast/Norton security suite was missing, which was not mentioned as an upgrade issue by Microsoft. What does Comcast recommend to get this free software installed for Windows 10?

Were you able to get the latest version of Norton Security Suite for Windows 10?
I can assure you that it's still the same great protection, while giving you the new look for Norton products. See for more info Norton Support article: My Norton product looks different
Let me know if you still need help with Norton.
Harry
Norton Support

ITunes won't start after Windows 7 Repair install

Hi there
I recently had to repair my Windows 7 64 bit Home Premium edition installation. It warned me before reinstalling that there could be some problems with iTunes following the repair but I followed the instructions to counter this and repair Windows 7. i.e. I uninstalled all iTunes software as outlined on Apples pages.
On opening Windows 7 again I ended up with a Blue Screen of Death - this pointed me to a faulty iTunes installation - I checked control panel and sure enough it was not listed as uninstalled. I therefore followed online instructions to completely remove iTunes and used Revo Uninstaller Pro to catch anything I missed. All looked good, I rebooted my machine and then went to install iTunes again. I chose the 64bit installer from the site and installed as normal. I have now tried to open iTunes (to sync my iPhone) and it thinks about it for a second and then never opens. On opening task manager I can see iTunes.exe*32 (does this mean 32 bit and if so why when I've DEFINITELY got the 64 bit installation), iTunesHelper.exe*32 and AppleMobileDeviceHelper.exe*32 all in Processes - they are not in open programs.
Even stopping these processes does not help. iTunes was working fine before my Windows 7 problems on this machine and all other software seems ok too following my repair. Can someone please assist me in getting iTunes to work again with my computer as this is very frustrating. This is not the first time it has happened to me - on my old Vista machine (different machine totally) this happened once or twice intermittently but then seemed to resolve itself. I have defrag, disk doctor and run just about every utility I have installed to get my system working ok and the only problem seems to be iTunes. I'd therefore appreciate help in resolving this.
Many thanks

Did you try and update through itunes or download the installer from the apple website?
I've read some where its better to just download the stand alone installer from apple and
do it that way.

ITunes manually added artwork is missing after Windows Easy Transfer from XP to Windows-7. Please help!

After a Windows Easy Transfer from a Windows XP pc to a new Windows-7 pc, all the iTunes artwork that I had previously manually added is now missing. I estimate 25-30% of my CDs needed manual intervention to add artwork. Some of these were album covers I found on the web but many are photos that I took and cropped but have not retained. I have nearly 20,000 songs. Every one had artwork on my XP machine. Now on Windows-7 it appears to be missing. I spent many patient hours to get artwork in place for all my music and don't want to loose it or have to repeat the process. Please help! Many thanks for any contributions.

Hi Funster58,
Please try the following methods to solve this issue:
Method 1: Perform a clean boot.
A clean boot helps to verify if any third party application services or startup item is causing this issue. For your information, please review this KB article to put the computer in clean boot:
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
Note: Make sure you put the computer back to Normal Startup once you are done with the troubleshooting.
Method 2: Run SFC Scan
System File Checker (SFC) scan can troubleshoot missing or corrupted system files on your computer. For your information.
Type cmd in the
Start, and right-click the Command Prompt, and then click Run as administrator in the below of screen.
Type sfc /scannow, and press Enter.
Method 3: Run check disk
Type cmd in the
Start, and right-click the Command Prompt, and then click Run as administrator in the below of screen.
Type chkdsk /r /f, and press Enter.
For your information, please review the similar issue to get more help:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/how-can-i-use-easy-transfer-to-transfer-settings/36b9123a-4b6b-4117-9af6-515e44665188
Regards,
Lany Zhang

CPU flag vmx missing after Oracle VM Server install

Hi all,
I'd like to know if anyone have found this issue too.
A two weeks ago I installed Oracle VM Server on a Intel Core2Duo E8400 that have Virtualization feature and Enabled on BIOS, but when I installed OVM this feature dissapearing from /proc/cpuinfo, confused I started a Linux (Debian Lenny) fresh install, after installation "vmx" flags has found in /proc/cpuinfo.
Is there any solution to this issue? Because I can't create any Windows VM using HVM (iso files) or V2V (VirtualBox to Oracle VM).
I'll appreciate and others that have been passed this issue too.
Regards,
Heitor Lessa
Blog -> http://tinodiaadia.wordpress.com

Sebastian,
I removed VMware Tools as you asked, but same error happened, follow above the "ovs_operation.log" since Import from "linux p2v utility" until start of vm today:
Obs. 10.x.x.247 -> Oracle VM Server
10.x.x.146 -> Host
"2010-09-22 16:30:03" INFO=> new_async_task_ext: success. ->wget ('https://10.x.x.146', '/OVS/seed_pool/', True, 'W2K3-Interface') => 7C261C17F3BF4FE09BE8C783A1D4DC30
"2010-09-22 16:30:03" INFO=> server('10.x.x.247') is selected as utility server
"2010-09-22 16:30:03" INFO=> directcall_in_asyncenv: success. utl_get_storage_repos ('7C261C17F3BF4FE09BE8C783A1D4DC30',) => success:repos=/var/ovs/mount/FA92B874059A436D9604E1306E19219A;free_space=1395015
"2010-09-22 16:30:03" DEBUG=> wget cmd: cd '/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/.wget/W2K3-Interface' && wget -o /tmp/wget-YJXJ82.log mirror continue tries=3 dns-timeout=30 connect-timeout=30 read-timeout=30 no-parent no-directories reject=*.htm* 'https://10.x.x.146/' no-check-certificate
"2010-09-22 17:17:03" INFO=> utl_move: success. /var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/.wget/W2K3-Interface moved to /var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/W2K3-Interface
"2010-09-22 17:17:03" INFO=> utl_wget: success. url('https://10.x.x.146/') => path('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool'), name('W2K3-Interface')
"2010-09-22 17:17:03" INFO=> directcall_in_asyncenv: success. utl_wget ('https://10.x.x.146', '/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/', True, 'W2K3-Interface', '', '', '', '7C261C17F3BF4FE09BE8C783A1D4DC30') => success
"2010-09-22 17:17:03" INFO=> wget: success. url('https://10.x.x.146') => path('/OVS/seed_pool/'), name('W2K3-Interface')
"2010-09-22 17:17:03" INFO=> directcall_in_asyncenv: success. wget ('https://10.x.x.146', '/OVS/seed_pool/', True, 'W2K3-Interface', '7C261C17F3BF4FE09BE8C783A1D4DC30') => success
"2010-09-22 17:17:08" INFO=> verify_image_v2v: /OVS/seed_pool/W2K3-Interface
"2010-09-22 17:17:08" INFO=> verify_image_v2v: success:ovm;vm.cfg
"2010-09-22 17:17:11" INFO=> xen_correct_qos_cfg: vm_cfg('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/W2K3-Interface/vm.cfg')=>success.
"2010-09-22 17:17:11" INFO=> xen_correct_cfg: success. vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/W2K3-Interface') => cfg_file('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/W2K3-Interface/vm.cfg')
"2010-09-22 17:17:11" INFO=> xen_correct_qos_cfg: vm_cfg('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/W2K3-Interface/vm.cfg')=>success.
"2010-09-22 17:17:11" INFO=> xen_correct_cfg: success. vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/W2K3-Interface') => cfg_file('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/W2K3-Interface/vm.cfg')
"2010-09-23 09:37:05" INFO=> xen_optimize_os_profile: success. vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/W2K3-Interface') os_type=windows os_variant=win2k3
"2010-09-23 09:37:05" INFO=> optimize_os_profile: vm('/OVS/seed_pool/W2K3-Interface') os_type=windows, os_variant=win2k3, os_arch= => success
"2010-09-23 09:37:05" INFO=> xen_correct_qos_cfg: vm_cfg('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/W2K3-Interface/vm.cfg')=>success.
"2010-09-23 09:37:05" INFO=> xen_set_vifs: success. vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/W2K3-Interface') set vif_cfg=,xenbr0,ioemu, mode=setall, scope=cfg
"2010-09-23 09:37:05" INFO=> set_vm_vifs: vm('/OVS/seed_pool/W2K3-Interface') vif_cfg=,xenbr0,ioemu scope=cfg => rs=success
"2010-09-23 09:37:13" INFO=> utl_rm_vm: vm (/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/Windows_2003-Interface) deleted!
"2010-09-23 09:37:13" INFO=> rm_vm: vm('/OVS/seed_pool/Windows_2003-Interface') => success
"2010-09-23 09:38:20" INFO=> new_async_task_ext: success. ->cp_vm ('/OVS/seed_pool/W2K3-Interface', '/OVS/running_pool/70_W2K3_Interface') => 7C005664D3C24D33BC6A5D63AC8FD624
"2010-09-23 09:38:20" INFO=> cp_vm: '/OVS/seed_pool/W2K3-Interface' -> '/OVS/running_pool/70_W2K3_Interface'
"2010-09-23 09:38:20" INFO=> directcall_in_asyncenv: success. utl_get_vm_size ('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/W2K3-Interface', '7C005664D3C24D33BC6A5D63AC8FD624') => success:size=30721
"2010-09-23 09:38:20" INFO=> directcall_in_asyncenv: success. utl_get_storage_repos ('7C005664D3C24D33BC6A5D63AC8FD624',) => success:repos=/var/ovs/mount/FA92B874059A436D9604E1306E19219A;free_space=1364421
"2010-09-23 09:38:20" INFO=> utl_cp_vm: vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/W2K3-Interface') -> vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface') start...
"2010-09-23 09:50:06" INFO=> xen_correct_qos_cfg: vm_cfg('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface/vm.cfg')=>success.
"2010-09-23 09:50:06" INFO=> xen_clear_vif_mac: success. vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface')
"2010-09-23 09:50:06" INFO=> xen_correct_qos_cfg: vm_cfg('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface/vm.cfg')=>success.
"2010-09-23 09:50:06" INFO=> xen_remove_shared_disk: success. vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface').
"2010-09-23 09:50:06" INFO=> regenuln_uuid: /var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface/vm.cfg.
"2010-09-23 09:50:06" DEBUG=> regenuln_uuid: System-sda.img.
"2010-09-23 09:50:08" DEBUG=> regenuln_uuid: mount -o loop System-sda.img /tmp/tmpyQzmJiovs_mount_point failed.
"2010-09-23 09:50:08" INFO=> xen_update_uuid: success. vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface/vm.cfg') uuid=
"2010-09-23 09:50:08" INFO=> xen_correct_qos_cfg: vm_cfg('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface/vm.cfg')=>success.
"2010-09-23 09:50:08" INFO=> xen_correct_cfg: success. vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface') => cfg_file('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface/vm.cfg')
"2010-09-23 09:50:08" INFO=> utl_cp_vm: vm (/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface) created!
"2010-09-23 09:50:08" INFO=> directcall_in_asyncenv: success. utl_cp_vm ('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/seed_pool/W2K3-Interface', '/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface', '7C005664D3C24D33BC6A5D63AC8FD624') => success:size=30721
"2010-09-23 09:50:08" INFO=> cp_vm: '/OVS/seed_pool/W2K3-Interface' -> '/OVS/running_pool/70_W2K3_Interface' => success:size=30721
"2010-09-23 09:50:08" INFO=> directcall_in_asyncenv: success. cp_vm ('/OVS/seed_pool/W2K3-Interface', '/OVS/running_pool/70_W2K3_Interface', '7C005664D3C24D33BC6A5D63AC8FD624') => success:size=30721
"2010-09-23 09:50:27" INFO=> xen_correct_qos_cfg: vm_cfg('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface/vm.cfg')=>success.
"2010-09-23 09:50:27" INFO=> xen_set_vifs: success. vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface') set vif_cfg=00:16:3E:60:43:FA,xenbr0,ioemu, mode=setall, scope=cfg
"2010-09-23 09:50:27" INFO=> set_vm_vifs: vm('/OVS/running_pool/70_W2K3_Interface') vif_cfg=00:16:3E:60:43:FA,xenbr0,ioemu scope=cfg => rs=success
"2010-09-23 09:50:27" INFO=> xen_set_vm_vnc_password: success. vm_path('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface')
"2010-09-23 09:50:27" INFO=> set_vm_vnc_password: success. vm_path('/OVS/running_pool/70_W2K3_Interface') => success
"2010-09-23 09:50:27" INFO=> set_vm_policy: vm('/OVS/running_pool/70_W2K3_Interface') policy=[] append=False=> success.
"2010-09-23 09:50:27" INFO=> xen_correct_qos_cfg: vm_cfg('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface/vm.cfg')=>success.
"2010-09-23 09:50:27" INFO=> xen_correct_cfg: success. vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface') => cfg_file('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface/vm.cfg')
"2010-09-23 09:50:28" INFO=> config_vm: failed. vm_path('/OVS/running_pool/70_W2K3_Interface') => <Exception: Error updating the image.>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 523, in config_vm
raise Exception("Error updating the image.")
"2010-09-23 09:55:22" INFO=> start_vm: vm('/OVS/running_pool/70_W2K3_Interface') dedicated_server=None start...
"2010-09-23 09:55:22" DEBUG=> start_vm: vm('/OVS/running_pool/70_W2K3_Interface') server selection starts...
"2010-09-23 09:55:23" DEBUG=> select_tgt_host: vm('/OVS/running_pool/70_W2K3_Interface')=>memory=768
"2010-09-23 09:55:23" INFO=> select_tgt_host: vm('/OVS/running_pool/70_W2K3_Interface') will run on srv('10.x.x.247')
"2010-09-23 09:55:23" DEBUG=> start_vm: vm('/OVS/running_pool/70_W2K3_Interface') server selection done.
"2010-09-23 09:55:23" DEBUG=> start_vm: vm('/OVS/running_pool/70_W2K3_Interface') on srv('10.x.x.247') ...
"2010-09-23 09:55:24" INFO=> xen_correct_qos_cfg: vm_cfg('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface/vm.cfg')=>success.
"2010-09-23 09:55:24" INFO=> xen_correct_cfg: success. vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface') => cfg_file('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface/vm.cfg')
"2010-09-23 09:55:25" INFO=> xen_start_vm: success. vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface')
"2010-09-23 09:55:26" INFO=> start_vm: success. vm('/OVS/running_pool/70_W2K3_Interface') => success:host_server=10.x.x.247
"2010-09-23 09:55:35" INFO=> ha_hook_vm_shutdown: success. vm_name='70_W2K3_Interface', shutdown_reason='1'
"2010-09-23 09:55:46" ERROR=> xen_status_vm: failed. vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface')=><Exception: ['xm', 'list', '70_W2K3_Interface'] => Error: Domain '70_W2K3_Interface' does not exist.
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenStore.py", line 54, in xen_status_vm
stdout = run_cmd(args = ["xm", "list", vm_name])
File "/opt/ovs-agent-2.3/OVSCommons.py", line 85, in run_cmd
raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
"2010-09-23 09:55:46" ERROR=> xen_set_cpu_cap:failed. vm('/var/ovs/mount/FA92B874059A436D9604E1306E19219A/running_pool/70_W2K3_Interface') cap=0 =><Exception: ['xm', 'sched-credit', '-d', '70_W2K3_Interface', '-c', '0'] => Error: Domain '70_W2K3_Interface' does not exist.
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVMConfig.py", line 2500, in xen_set_cpu_cap
run_cmd(args=['xm',
File "/opt/ovs-agent-2.3/OVSCommons.py", line 85, in run_cmd
raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
"2010-09-23 09:55:46" ERROR=> set_vm_cpu_cap: failed. vm('/OVS/running_pool/70_W2K3_Interface') cap=0, scope='mem' => <Exception: failed:<Exception: ['xm', 'sched-credit', '-d', '70_W2K3_Interface', '-c', '0'] => Error: Domain '70_W2K3_Interface' does not exist.
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVMConfig.py", line 2500, in xen_set_cpu_cap
run_cmd(args=['xm',
File "/opt/ovs-agent-2.3/OVSCommons.py", line 85, in run_cmd
raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVMConfig.py", line 1110, in set_vm_cpu_cap
if not rs.startswith("success"): raise Exception(rs)

Coprocessor drivers missing after window 8.1 installed

Similar Messages

Maybe you are looking for