Copy from

Hello Experts,
We would like to edit the landed cost (LC) created in the past (in B1 2005A SP01 PL52). After upgrade to B1 2007A SP01 PL10, we want to edit the created lc. However, the document is not available to edit. The LC document is created in april, 2010. Pls adv.
Andres

Hi,
landed cost in version 2005 is different with landed cost in version 2007. you can edit created landed cost if the journal entry is not yet created. it is behavour of landed cost in version 2005. If you have created the journal entry, the landed cost can't be edited anymore.
The status of document is closed. you can cancel manually by creating reverse journal entry and revaluating the item prior to creating the reverse journal entry.
If B1 2007A, landed cost can be edited but you can use function copy from landed cost. It means that the created landed cost will be edited and after edited, system will create new landed cost. The journal entry of the new landed cost is also created. You can find that the new landed cost will inform the edited landed cost number in its remark field.
JimM

Similar Messages

A/P Credit memo cannot copy from A/P Downpayment Invoice

Hello Everyone!
I have encounter problem in A / P credit memo. If I clicked on the Copy from A/P Down payment the list of invoices do not appear.
List seems to be empty. I've checked on the A/P down payment and the account is still open and the is an existing downpayment.
Thanks!

Hi Nelle_13,
if the DPI is not shown in the matrix when you select AP Down Payment from the 'Copy From' menu in the credit memo, then that DPI has been paid or credited already. Only open DPIs can be used as base document for a credit memo.
To check, you should open the DPI, rightclick & select 'Applied/Reconciled Transactions'. That will show you the documents this DPI is reconciled with & guide you to the payment/credit note standing on it. If it's a payment, you can cancel the payment & thus re-open the DPI. It can then be used as base for a credit memo. You'll need to check with the accountant what to do with the payment.
All the best,
Kerstin

Client Copy from BWP to BWT

I had a problem with my List Cube Transaction and for that reason, I had a look at the Infoprovider and also the Data Sources.
When tried to execute the infoproviders in LISTCUBE, the following messages are being displayed in BWT system:
1. Error reading the data of InfoProvider ZIP_RC_01
2. There is still no data source assigned to VirtualProvider ZIP_RC_01
But, when executed the same in BWD, then it is working fine.
I have checked the Data Sources in the R/3 Dev system and the DS has no problem. But, when I check the DS in the R/3 Prod (SS in BWT system), the following error message is displayed in the status bar:
"DataSource Z_IP_RC_DS_1 is not defined in the source system"
I thought, as the system says the Source system is not available, hence the problem in LISTCUBE and thought if we transport the DS again and then replicate in BW, then our problem would be resolved.
But, seems that even though the source system says "PRD300", if I look at SM59 it actually points to our QAS system. It says PRD300 because BWT is a copy down from BWP, and that's the source system we use - in other words the logical name is the same, but the actual servers are different.
In any case, the datasource is transported to our QAS enviroment.
So, once we do a client copy from Prod to Test, even the source systems get copied. If yes, then does it really affect in case of replications and transports???
I am really confused in this part...please explain.
Thanks & Regards

Hi,
It looks like the basis team, or whoever performed the Copy from production to QA box hasn't finished all the necessary Steps :
Main transaction to know:
SSC4 -> To create new client
SCCL -> Client copy within local system
SCC9 -> remote client copy
SCC3 -> display client copy log
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c4e4ba111d189750000e8322d00/content.htm
http://www.sap-basis-abap.com/bc/client-copy-from-production-to-quality-server-to.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci552257,00.html
Probably sounds like transaction BDLS hasn't been done.

Error in phase import Homogeneous system copy from a BI 7.3 dual stack ABAPJAVA

Hi
I'm doing a Homogeneous system copy from a BI 7.3 dual stack ABAP+JAVA system with an Oracle DB (11g version, 11.2.0.3.0 patch level) with AIX ibm OS.
Before starting export I've executed in the source system the report SMIGR_CREATE_DDL, as described in sap note 888210, and I generated *.SQL files.
After, during the import in the target system I get the following error message:
vi /expdb2/tmpDB0/sapinst_instdir/NW730/ORA/ORA/COPY/ORA/SYSTEM/STD/AS/import_monitor.log
INFO: 2014-03-08 00:21:57 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 0, waiting 1, completed 60, failed 5, total 66 finish processing of package SAP0000
You can see below the detail of the 5 packages in error:
SAPAPPL0_1_5
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140307141347
SAPZPSA
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
SAPDODS
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DB
SAPDFACT
DbSl Trace: Error 1741 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-01741 occurred when executing SQL stmt (parse error offset=8126464)
(DB) ERROR: DDL statement failed
( ALTER TABLE "/BI0/F0TCT_C01"    ADD PARTITION "/BI0/F0TCT_C010000001131" VALUES LESS THAN ( 0000001131 )    TABLESPACE "" )
DbSlExecute: rc = 99
(SQL error 1741)
error message returned by DbSl:
ORA-01741: illegal zero-length identifier
(DB) INFO: disconnected from DB
SAPZOSO
DbSl Trace: Error 922 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-00922 occurred when executing SQL stmt (parse error offset=242024448)
(DB) ERROR: DDL statement failed
(CREATE TABLE "/BIC/B0000989000"    ("REQUEST" VARCHAR2 (000090)      DEFAULT ' ' NOT NULL,    "DATAPAKID" VARCHAR2 (000018)      DEFAULT '000000' NOT NULL,    "PART
NO" NUMBER (000010)      DEFAULT 0 NOT NULL,    "RECORD" NUMBER (000010)      DEFAULT 0 NOT NULL,    "PLANT" VARCHAR2 (000012)      DEFAULT ' ' NOT NULL,    "MATERIA
L" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "RPA_CURUOM" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RPA_MVF" NUMBER (000017, 000002)      DEFAULT 0 NOT N
ULL,    "PRICE_UNIT" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "RPA_QTYUOM" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "RT_SSMFGR" VARCHAR2 (000024)
    DEFAULT '00000000' NOT NULL,    "BASE_UOM" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "FRE_PLNPUR" VARCHAR2 (000036)      DEFAULT ' ' NOT NULL,    "FRE_MINS
TK" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "FRE_SERLEV" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "FRE_SELCLS" VARCHAR2 (000003)      DEFAULT '
0' NOT NULL,    "FRE_REPLST" VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "ABCKEY" VARCHAR2 (000003)      DEFAULT ' ' NOT NULL,    "RECORDMODE" VARCHAR2 (000003)
    DEFAULT ' ' NOT NULL,    "RT_SERVLEV" VARCHAR2 (000003)      DEFAULT ' ' NOT NULL,    "RT_SUPS" VARCHAR2 (000003)      DEFAULT ' ' NOT NULL,    "VAL_TYPE" VARCH
AR2 (000030)      DEFAULT ' ' NOT NULL,    "PUR_GROUP" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "RT_VPNEU" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,
"CURRENCY" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RT_VRKPE" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "DISMM" VARCHAR2 (000006)      DEFAULT ' '
NOT NULL,    "SALES_UNIT" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "RT_VP_BT" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "RT_VPE_BT" NUMBER (000017,
000003)      DEFAULT 0 NOT NULL,    "RT_VP_NT" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "RT_VPE_NT" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "R
T_VWAERBT" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RT_VWAERNT" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RT_VPMEIBT" VARCHAR2 (000009)      DEFAULT '
' NOT NULL,    "RT_VPMEINT" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "LOC_CURRCY" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "UNIT" VARCHAR2 (000009)
DEFAULT ' ' NOT NULL,    "CM_MCATDIV" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT1" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT2" VARCHAR2
(000054)      DEFAULT ' ' NOT NULL,    "CM_CDT3" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT4" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_HIEID"
VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "CPSTLC" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "CPSVLC" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL
,    "STOCK_VAL" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "STOCK_QTY" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "RT_SEASON" VARCHAR2 (000012)
DEFAULT ' ' NOT NULL,    "RT_SEASYR" VARCHAR2 (000012)      DEFAULT '0000' NOT NULL,    "CALDAY" VARCHAR2 (000024)      DEFAULT '00000000' NOT NULL,    "CALWEEK"
VARCHAR2 (000018)      DEFAULT '000000' NOT NULL,    "RF_BNDID" VARCHAR2 (000012)      DEFAULT ' ' NOT NULL,    "/BIC/ZCATTR3" VARCHAR2 (000006)      DEFAULT ' ' NOT
NULL,    "/BIC/ZCSTYLE" VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "/BIC/ZCIMAGE" VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "/BIC/ZCBRNDTYP" VARCHAR2 (000
003)      DEFAULT ' ' NOT NULL,    "/BIC/ZCGROUPE" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL)    PCTFREE 10    PCTUSED 00    INITRANS 001    TABLESPACE    STORAGE (
INITIAL    0000000016 K            NEXT        0000001024 K            MINEXTENTS 0000000001            MAXEXTENTS 2147483645            PCTINCREASE 0000
    FREELISTS 001            FREELIST GROUPS 01)      PARTITION BY RANGE ("PARTNO")      (      PARTITION "/BIC/B00009890000000000002" VALUES LESS THAN      (00000
00002)      NOCOMPRESS      ) )
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DB

hello,
Before anything update DB shared lib, R3load, R3ldctl and R3szchk in the target system. Also Check in source system if you have any tables o index missing in db02 transaction, If this system wa upgraded from a previous release please check TAORA and IAORA tables in source system and check all the tablespaces named in those tables are created in the target system.
let me know how it goes.
Regards,
Michael

Copying from Oracle SQL Developer to Microsoft Word doesn't retain formatting (Font,colors etc)

Copying from Oracle SQL Developer Worksheet doesn't retain formatting (font,color etc...)in Microsoft Word but copying from other programs such as
visual studio, chrome browser etc works fine. This doesn't work even after changed the setting to Keep Source formatting of Options-> Copy and Paste Settings

Hi,
I notice that you have cross posted in Answers forum and Oracle forum. Have you tried Mr. Peter's suggestion?
Then, I recommend we check the Word settings:
1. Go to: Options > Advanced > Cut, Copy and Paste
2. Make sure that Use smart cut and paste is ticked.
3. Click the Settings button next to this option
4. Make sure that Smart Style
Behavior is checked.
If the issue still exists, please upload a sample through One Drive, I want to test.
Regards,
George Zhao
TechNet Community Support

ZenXtra: copying from Zen: "file unaccesib

Hi,
When copying from my Zen Xtra, after transfer of a couple of files in queue I receive an error: "file unaccessible..." and I cannot copy anything more unless I reconnect. Moreover Zen and the connection seems to be out of order (ie. not all fields visible in Zen Settings in MediaSource). Sometimes after that there is a message: player unconnected, although there is no other evidence of lost connection.
I tried:
MediaSource from CD and new one from internet.
Driver from CD and Internet
Rescue mode clean up
Firmware remove and install again
All PC Zen software removal, reboot, reinstall, reboot
My Zen Xtra 60GB is running on firmware .20. PC is running WinXP Pro.
Uploading TO Zen works fine.
Regards

Chances are it's a USB compatibility issue with the PC. The simple test is to install the drivers and software on another PC, and test some transfers. If it works fine then it's the original PC, if it still has problems then it's an issue with the player.
Search on "connection problems" in the FAQ Part post for a link to a lot more troubleshooting information.

Data not loading to cube copied from 0sd cubes

hello everyone,
wen ever im trying to load data from r/3 into a cube which is created by copying from a 0sd cube, everything is running successfully, info package, dtp, transformations and all, but when i look into the contents tab, it says this is not a basis cube, can anyone explain pls.
thanks in advance

Hi
Some one changed the settings of your cube from Basic cube to transactional cube ( real time infocube in IP)
Change it from transactional cube back to basic cube..This error will not come
Regards
N Ganesh

Download doc problem when copied from APEX_APPLICATION_FILES to local table

Good morning!
As the subject indicatesm, I am experiencing problems downloading a document I have copied from APEX_APPLICATION_FILES to my local table FILE_SUBJECTS
and would be very grateful if someone could help.
Here is the problem:
I can successfully upload a document into APEX_APPLICATION_FILES and dowload it from there too.
I can copy the record from APEX_APPLICATION_FILES into my local table FILE_SUBJECTS and delete that entry from APEX_APPLICATION_FILES but I cannot download it from my local table, it keeps pointing me to a page which cannot be found, so I'm guessing there is something wrong with either, my INSERT INTO statement or, my link in the report.
My INSERT INTO statement is:
INSERT INTO file_subjects (id,filename,updated_by,updated_on,blob_content,mime_type)
SELECT id, filename, name, updated_by, updated_on,blob_content,mime_type
FROM APEX_APPLICATION_FILES
WHERE APEX_APPLICATION_FILES.filename = :P2_FILE_NAME;
REPORT LINK
I have tried just a normal column link in my report like: #ID# (this works when looking at APEX_APPLICATION_FILES)
but I have also tried the following:
#OWNER#.DOWNLOAD_MY_FILE?p_file=#ID#
where download_my_file is a procedure:
create or replace PROCEDURE "DOWNLOAD_MY_FILE" (p_file in number) AS
v_mime VARCHAR2(48);
v_length NUMBER;
v_file_name VARCHAR2(2000);
Lob_loc BLOB;
BEGIN
--apex_application.g_flow_id := 166;
--if not(APEX_CUSTOM_AUTH.IS_SESSION_VALID) then
-- owa_util.status_line(404, 'Page Not Found', true);
-- return;
--end if;
SELECT MIME_TYPE, BLOB_CONTENT, name,DBMS_LOB.GETLENGTH(blob_content)
INTO v_mime,lob_loc,v_file_name,v_length
FROM FILE_SUBJECTS
WHERE id = p_file;
-- set up HTTP header
-- use an NVL around the mime type and
-- if it is a null set it to application/octect
-- application/octect may launch a download window from windows
owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE );
-- set the size so the browser knows how much to download
htp.p('Content-length: ' || v_length);
-- the filename will be used by the browser if the users does a save as
htp.p('Content-Disposition: attachment; filename="'||replace(replace(substr(v_file_name,instr(v_file_name,'/')+1),chr(10),null),chr(13),null)|| '"');
-- close the headers
owa_util.http_header_close;
-- download the BLOB
wpg_docload.download_file( Lob_loc );
end DOWNLOAD_MY_FILE;
Many thanks in advance!
Sue

Sue,
If you are running XE or running with the EPG versus the http server, you need to grant access to the procedure you are using for it to be run properly..
You may need to look at this function, if you are using XE or have the EPG setup for your database.. http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e12856/adm_wrkspc.htm#BABEFDHI [Look for the section called *Restricting Access to Oracle Application Express by Database Access Descriptor (DAD)*]
Thank you,
Tony Miller
Webster, TX

Copy from Time machine to an new iMac doesn't Work ?

I bought a new iMac and want to copy from time machine that is on an external disk. Copying stops after 10 minutes. What to do?

Please visit Pondini's Time Machine FAQ for help with all things Time Machine.

Address not copied from Sales order/Delivery to Shipment Document

Hello Experts,
I need your help on Addrss of ship to in shipment document.
Sales Order[VA01] >> Delivery [Vl01N]>> Shipment [VT01N].
User changed the Address of ship to party (Header level) in Sales Order and It reflected to delivery as well and I believe It should also update the address in Shipment document.
But when I checked the Address of the Customer/Unloading point in Shipment Document [VT03N] (as below) I found It was not updated It was same as Customer Master Record and I believe It directly copied from Customer Master Record.
BUT While creating the Shipment system is copying the data from Customer master Record not from Sales Order /Delivery. Logically system should copy the updated address from Order/Delivery BUT It is directly copying from Customer Master i don't know where is the setting of this ??
Can anybody help me on this ? How system takes the customer (ship to party) address in shipment ? Where are the setting of these.
What I need to do so system take the updated address from Sales Order/Delivery not from Customer Master Record (Ship to party).
Can I change the address of customer in shipment document ??
Awaiting your precious reply.
Thanks,

Hello Samir,
Thanks for your response.
I think you get my question in wrong way.
I am sayingCustomer master data was not changed.
User just changed the Address in Order (Order > Header >> Partner tab >> Change ship to address/overwrite ship to address).
Overwritten Address / Updated address are copying in Delivery BUT not in Shipment document.
What I need to do? system should copy the updated address from Sales Order/Delivery BUT it is copying from Ship to party.
I hope this time i am clear to explain my issue.
Thanks,

Can't change quantity when copy from Sale order for Delivery

Hi all!
Can i use authorization for can't change quantity when copy from Sale order for Delivery.

Tien,
Approval will not work when you have mutiple rows of data. You would have to work with SP Transaction Notification
There has been threads before on the forum on the same topics.
Block the Quantity in Sales Delivery
Approval Procedure for chaning quantity in Delivery Document
Suda

Can I send a link to a photo book so family members can choose to order a copy from Apple?

I woud like to share the photo book that I created so that family members in other states can consider purchasing a copy from I Photo. Is there a way they can view it?

Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
you can share the PDF via drobbok or other file sharing service
LN

Is there any way to use copy from function in cProject Project creation.

Hi,
Kinldy suggest if any one have idea to use copy from function in cProject while creating Project in cProject.
We have copy from function in our material creation and BOM, Is there any way to copy the old project and we can take the same for new project as a Paste entire structure.
Please share with me if you have any ideas for the same.
Thanls in advance for your help.
Thanks & Regards.
Raj

Hi,
please see
[http://help.sap.com/saphelp_ppm50/helpdata/en/4a/6431a343946ba2e10000000a421937/frameset.htm|http://help.sap.com/saphelp_ppm50/helpdata/en/4a/6431a343946ba2e10000000a421937/frameset.htm]
there the third case ("Based on an operational project ...")
Kind regards,
Florian

Can I and How do I copy from one iWeb site to another.

I currently have a few different versions of my web site stored as different doman.sites I would like to copy a blog entry from one into another. Is it possible to do that and if so how. I am sure I could copy all the text and all the pictures separtly and then paste them in, but that would be tendious as I would either have to keep opening and closing iWeb between the different versions or have them both open on separte accounts on my computer and keep jumping back and forth between them. Any suggestions? Let me know.
http://web.mac.com/captrustywildrice/
[email protected]

what exactly would I copy from one folder to another to be sure that the blog entry that I am copying shows up in the blog menu? I would like to be able to copy everything together, dates, links at the bottom, hit counter and all, rather than piece by piece off of the site or from another iWeb account. Thanks!

Copying from one iphoto library to another/working with multiple libraries

hi-
my current workflow involves having a 'master library' on one of my external HDs where i store ALL of my images (35,000+) and a 'working library' in my macbook pro where i dump most recent pics first. typically i dump to the working library & then about every 3 months, i burn those events onto disc(s) from within iphoto, open my master library and copy from the disc into the master library. then i will seasonally clear the working library out other than a few portfolio items i may want to keep there.
in the past, when i copied onto the disc and then into the master library, the event names and ratings would copy over too (although if i'd keyworded them, that would get screwed up, so i stopped). now it's not working! the correct event names and ratings show up on the disc, but they are not copying into the master library. i believe this is since i upgraded to ilife 09.
any ideas? it is essential to my current workflow to preserve those event names and ratings. i turned 'autosplit' off in preferences. i tried turning it on. anyone else have experience working with more than one library like this?

thanks larry, i'll check it out and let you know if that solves it. should the free version be sufficient? looks like this could be a really big help if it actually works, cuz i would like to create a 3rd and 4th library for other purposes but not if it's just going to make things more of a pain for me.
i assume this should help with the keyword issue i was having before too? (if i keyworded pics in my working library, the keywords on those pics once copied to the master library would be wrong, it would apply other keywords sometimes, most of the time...)
i appreciate your help.
- artis

I have songs missing on iTunes but they are on my iPhone. How can I copy from the iPhone into iTunes on my mac air

I have songs missing from my iTunes on the computer but they are on my iPhone 3s and my iPad mini. How can I get them into iTunes so they are in my library.?I have the latest iTunes on my commuter. Thanks for any suggestions.

If they were purchased from iTunes then connect the phone to your Mac's iTunes and the File > Devices > Transfer Purchases should copy them over. If they came from other sources (e.g. copied from CDs) then you will need a third-party program on your Mac to copy them back - there are some listed half-way down this page : Recover your iTunes library from your iPod or iOS device.
If by 'missing' you mean that you have them listed in the Music part of your iTunes library but get the 'would you like to locate' message when trying to play them then you will need to delete them from there for the Transfer Purchases to work - otherwise that will see those entries in your library and assume that you still have them somewhere and not copy them back.

Copy from

Similar Messages

Maybe you are looking for