Copy function in APEX needs userid and password

Hi,
I use APEX 3.2 on Windows Vista and XDB, PL/SQL Gateway on Oracle Database 11g.
The installation was very easy and the application runs nearly perfect. In 1 site there is a function (Button) to copy a record from the database to the screen to make updates. Here needs the system a userid and a password. I unlocked the user XDB and set the password to xdb (alter user as sys).
Nothing changed. Which userid and password is needed?
Can anyone please help me.
Thanks and kind regards
Siegwin

I need some more info than that. Please provide me with the wokspace name, username & password. You can post that here and change the password afterwards or send me an e-mail.
But you added some additional info..let's rephrase:
1. You had 11gR1 and upgraded the standard APEX version (3.0) to 3.2 and created your app in there.
2. You upgraded your database to 11.0.1.7 and ended up with the standard APEX 3.0 (FLOWS_03000).
3. So where is the 'old' FLOWS_030200 schema? Is that still in the database?

Similar Messages

BSP - UserId and Password for Internal Users - Anonymous for other users

Hello,
We developed an application via BSP's. This application can be accessed by two kind of users.
1. External Users, with should access the page without using a userId and password.
2. Internal Users, they will have more authorisation and need to specify their userId and Password.
How can we accomplish this? I tried internal aliases, but can't get it to work properly.
In the first service 'zbsp' I didn't specify a userId and password in sicf.
Then I created an internal alias 'zbsp' referring to this 'zbsp'. In this alias I specified a userId and Password, but the system still asks for a userId and Password. (and after logging in the system gives the following error: The application name in URL .../bc/bsp/sap/zbsp2/uat_report.htm is invalid.)
What did I do wrong? Or are there other ways to accomplish this?
Greetings,
Bart

Take a look at the following mesaages that discussed the whole SSO and SSO2 ticket logins.
As for a way to handle the two different login types. Well first and formost - active the SSO Tickets on your system. Set your BSP up for that.
Then create a new starting page with an alias to the pöublic section for BSP's in your system. On this page make two links.
For your external users - one that redirects to your BSP passing the user and password in the url for the "read only external user" - that's the sap-user=name here&sap-password=passwordhere.
For your internal people give them simply the link to the BSP which when they click it will see no user name and password and redirect them to the BSP login.
Make sure you setup the BSP login according to SAP note 517860 and follow the instructions from http://help.sap.com/saphelp_nw04/helpdata/en/1d/13c73cee4fb55be10000000a114084/frameset.htm using the supplied SYSTEM_PUBLIC)
It's a bit basic but it works, we do it
Oh and setting up the system for the SSO (transaction sso2) is very very simple!!

Hi, how to develop application , matching of userid and password to backend

hi masters ,
              , user have to give userid and password of back end sap system to see particular report. i mean there is a first view ( this first view muust not be first screen of portal ) with userid and password fields . after gave his id and password he can go to second view to see the particualr details .please suggest me about how to do custom bapi code and , in also webdynpro java how to develop .
           i know about sso. in this concept i have to use through webdynpro java only. no need of sso concept here .
          after giving the userid and password , those details must be match with backend sap database.if no one of userid and passwrod field is matching it has to show some error message. and in password field must be in encrypted letters .

hi surya,
Use JCO api to create connection to the backend.
[JCO tutorial|http://www.apentia-forum.de/viewtopic.php?t=1962&sid=9ac1506bdb153c14edaf891300bfde25]
On the webdynpro screen you can ask users to enter login id and password. Use this information to create connection to backend using JCO.
Hope this helps!
Monalisa

I want to be format my hard disk, but want to take a backup copy of information from the Firefox and passwords and book marks so retrieved after formatThank you

I want to be format my hard disk, but want to take a backup copy of information from the Firefox and passwords and book marks so retrieved after format
Thank you

For backing up bookmarks, see [[Backing up and restoring bookmarks]]
If you want to back up passwords, you need to use an extension such as Password Exporter. This is located at https://addons.mozilla.org/en-US/firefox/addon/2848/ .

How to use the userid and password infor from Oracle DB in BO

Out client has the userid and passwords(encrypted) infomration stored in oracle table.
Is it possible to import this useid and password information into BO .And use the same userid and password from Oracle table for its login authentication and for data security...?
In other words can the userid/pwd info from Oracle Profile Table imported and re-used in BO Enterprise Edition.

If the users/pw are in an Oracle LDAP v3 compliant server then you can import them via LDAP plugin, else you would need to bring them in an enterprise users via script. The Import wizard can do this and the SDK (see the SDK forums for more info on how)
Maintaining the passwords would be difficult unless you are using and industry standard directory like LDAP.
Regards,
Tim

Where to set UserID and Password for NFS file share in Central File Adapter

Hi All,
Does anyone know if/where it is possible to set the userID and password if you want to connect to an NFS fileshare with the central XI30 file adapter?
Cheers,
Frank

Hi Frank,
The file adapter uses user ID SAPSERVICE... with the addition of the system ID of your SAP XI system. So if your system ID is EXD the user id which needs read/write access should be SAPSERVICEEXD.
Have fun

UserID and Passwords in Oracle BI EE Maui

Are UserID's stored in the .rpd, the .webcat or in some other file? If in some other file, what is the filename and path?
We are setting up 3 environments: EPMDEV, EPMTST, and EPMPRO for Development, Test, and Production. To migrate from one environment to the next we copy the .rpd and the .webcat file. I want to ensure that doing so does not also copy the userids and passwords from one environment to the other.
We want to maintain each unique environment with it's own set of userid/passwords that can be changed by the user. We are not using database authentication.
Thanks!
Annie

Hi Gopal,
The following calculation gives you the minutes between <datetime_column1> and SYSDATE: TIMESTAMPDIFF( SQL_TSI_MINUTE , <datetime_column1>, VALUEOF("CURRENT_DATE"))
Good Luck,
Daan Bakboord

How can I specify SMTP Email Server userID and password when using Email VIs?

How can I specify SMTP Email Server userID and password when using Email VIs included in Internet Toolkit?

Hi,
A similar question was posted on Discussion Forums soem time back. Please see the link below.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000C7B00000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
You would find the last post in the above thread quite useful where it has a link to OpenG code. I am also copying that link for your reference.
http://www.openg.org/tiki/tiki-index.php?page=OpenG+Internet+Connectivity+Tools
Please feel free to respond to this post with any questions/comments you may have.
Regards,
Ankita A.
National Instruments

How to avoid prompting the userid and password in Drop Down Menu

Hey Guys hope you can help me.
I have created a page wherein within that page I have a drop down menu using a javascript here is the code (please see my code below): Now the problem is each time I click any of the selection below the useid and password prompt me.
Is their any way that this can be fixed so that I cann pass the userid and password as a parameter? I have already tried to pass the &SESSION but it does not work.
Please enlighten me on this one....
Thanks,
Henry
<select name="P300_selected_alert" size="1" onChange="bringMeHere(this.options[selectedIndex].value)">
<option value="" selected>-Select One-</option>-->
<option value="All Alerts">All Alerts</option>
     <option value="Acknowledged">Acknowledged</option>
<option value="Unacknowledge">Unacknowledge</option>
<option value="Acknowledged-Resolved">Acknowledged-Resolved</option>
     <option value="Acknowledged-Unresolve">Acknowledged-Unresolve</option>
<option value="Target Name">Target Name</option>
     </select></td>
</td>
<script language="JavaScript1.1" type="text/javascript">
function bringMeHere(a)
if (a == "Acknowledged")
location.href="f?p=103:295:12375097291676676231:NO::";
else
location.href="f?p=103:300:12375097291676676231:NO::";
</script>
---------------------------------------------------

Henry,
See the change I made to your reports region template on page 1, adding the session id to the links as was suggested earlier:
var Session_Id = html_GetElement('pInstance').value;
if (a == "Name")
location.href="f?p=35225:3:"+Session_Id;
else if (a == "Employee")
location.href="f?p=35225:2:"+Session_Id;
else
location.href="f?p=35225:1:"+Session_Id;
And again, you do not want to be hard-coding the application ID anywhere in your code.
Scott

Popup with userid and password

Running FP_TEST_00 results in a popup asking for userid and password.
Trying to activate a form results in the same symptom.
Testing the connection with SM59 ends successful.
We are using the ABAP stack. The system user ADSUser is created.
Any suggestions?

Dear Frans,
For Interactive Forms in ABAP you need a RFC-HTTP connection to the Java Stack for calling the ADS and a HTTP connection from the Java stack to the ABAP stack for getting the IF-template out of the ABAP database.
So you need to check both connections. SM59 for calling the Java stack and Visual Admin (Java based Admin tool for Java Stack) to check the connection to the ABAP stack.
There will be a Developer Introduction Course for SAP Interactive Forms (Code WNLADO) at SAP Education NL at 15, 16 & 16 August which will cover you problem. NL for Business has developed this course on request of Adobe EMEA and SAP NL. Also in September (12,13 & 14) and December this course is planned at SAP Education in the Netherlands and the language will be English. Other countries will follow soon.
If you need help please contact me at NL for Business, www.nl4b.com

Creating userid and password login from web page

I want to create a page where i will have userid and password.When i log in it should check the username and password in the table.
When i make a new entry also it should be added in the table
Please help me how to proceed with this .
Please help me in creating the html page also

mod_plsql manual at:
http://download-east.oracle.com/docs/cd/B25221_03/web.1013/b25599/toc.htm
Configuration for mod_plsql:
$ORACLE_HOME/Apache/mod_plsql/conf/dads.conf
First thing to do is to ensure that mod_plsql works and can run your stored procs. Edit the dads.conf file (use dads.readme for instructions) and configure a DaD (Database access Descriptor) for you database.
Restart Apache to effect the config change. I simply (and incorrectly) use $ORACLE_HOME/Apache/Apache/bin/apachectl - and it will tell you why it is not recommended and the correct command to run.
The URL for will be something like:
http://yourserver/dad/[schema.][package.]procedure[&parameters]
The stuff in square brackets are optional.
Create the following sample PL/SQL proc to call from the web browser:
create or replace procedure Hello( cName varchar2 DEFAULT NULL ) is
begin
htp.prn( 'Hello World from '|| NVL(cName,'Nobody') );
end;Make sure the Oracle user you configured the DaD with has exexcute rights on this procedure. E.g. if the DaD uses Oracle user WEB_USER to connect to the database and the procedure is created as SCOTT, then SCOTT must grant execute rights on the proc to WEB_USER.
The web browser URL for calling this stored proc will look as follows:
Without passing any parameters:
http://yourserver/dad/scott.hello
With passing the cName parameter as defined in the stored proc:
http://yourserver/dad/scott.hello?cname=John
As for the rest - you likely will need to use cookie authentication to "login" from a web page. Then you also need to determine just how you are going to use these session cookies on the database server side for security. How you're going to manage these cookies. Persist them in the database. Which also means managing session states for stateless clients via such a session cookie. Etc.
This is not trivial to design, code and implement.
Why not use Oracle Application Express instead?

Transfer Userid and Password

Dear Experts,
How to transfer list of userids and passwords to New portal 9.02 iAs from portal 3.0 (on different machine)?
Do we need to upgrade the portal3.0? This is really frustating since we will loose alot of people's password.
Thank you for any reply.
Ken,
Austria

Hello
this is possible
You need to run the upgrade scripts for SSO MIgration.
This will migrate your users from 309 to New iAS Infra.
Please check on metalink to get these scripts.
regards

Retrieve userid and password

How do you retrieve the userid and password using coldfusion
when you login to windows?

Typically the CF developer does not care what the password
is. They just care that the person is authenticated on the network.
It is very wise of your admin to not allow the password to be
displayed, obviously.
Why do you need the actual password, rather than just knowing
that the person is authenticated on the domain?

Safely forward userID and password

I am writing a servlet/JSP application where a user will see a logon screen once. After successfully entering userID and password, I will display a list of available web applications. User selects one, and I want to forward them on to that application's entry servlet with the userID and password. My question is how to do that 'safely'.
1) Easy to do with a GET-type URL (where url = url?userid=value1&password=value2)using response.sendRedirect(url). However, I found after successful processing by the next application's entry servlet, the userid and password are still displayed in the address bar on the next screen. Is there any way within the receiving servlet to trim those off the displayed url?
2) I tried using the POST, where I contact the next application, get the page back and display it. The problem is the next application adds session data in the entry servlet, and when I just get the page back and display it, the session data is lost. Here's an example of the code I used:
String userInfo = �url?userid=value1&password=value2�;
byte[] bytesUserInfo = userInfo.getBytes();
HttpURLConnection urlConn = (HttpURLConnection)
url.openConnection();
urlConn.setDoInput(true);
urlConn.setDoOutput(true);
urlConn.setAllowUserInteraction(true);
urlConn.setUseCaches(false);
urlConn.setFollowRedirects(true);
urlConn.setRequestProperty("Content-length",
String.valueOf(bytesUserInfo.length));
OutputStream out = urlConn.getOutputStream();
urlConn.connect();
out.write(bytesUserInfo);
out.flush();
out.close();
String responsePage = "";
String line = "";
BufferedReader in = new BufferedReader(
new InputStreamReader(urlConn.getInputStream()));
while((line = in.readLine()) != null) {
responsePage += line + "\n";
response.setContentType("text/html");
PrintWriter pw = response.getWriter();
pw.println(responsePage);
pw.flush();
pw.close();
So I would display the responsePage (the second screen of the next appliction, typically a menu). But the next application expects there to be session data attached, which it established in the entry servlet. The way I get the page and display it, the session info is lost.
3) I also tried going to a 'invisible' page, then using META tag redirect, or JavaScript redirect, but then the userid and password got lost.
Is there a good way to transparently forward a user and the id and password?

Unfortunately cookies won't work here. The hidden
sessionID might - that's a good suggestion. My
question there is currently appB doensn't use
sessionID's. It just uses
HttpSession theSession = request.getSession(false);This only tells you to not create one if it doesnt exist. But if it exists, and as you are using one, it will use it. On the server there will be a sesssion which can be found by its sessionID, so you are using a sessionID. If a browser doesnt support cookies, a sessionID will be appended to the url, thats your sessionID to find your session in the session object. See request.getRequestedSessionID()
>
I might be missing something easy here, but if it
knows the sessionID is hidden, how can it convert that
to a HttpSession? Will it need some new collection
now to relate the sessionID's to the sessions? I was
looking the the API for an easy way to relate the
sessionID to the actual session, but nothing jumped
out at me.

How do I enter UserID and password to access my pasworded space on ISP server

I need to view and upload files to my web page space on my ISP server. I can connect using "ftp.(ISP).com but must enter my UserID and password to get to my files. How do I do this in Firefox?

You can prefix the URL with the username to force Firefox to display a connection pop-up.
*http://[email protected]/
*ftp://[email protected]/

Copy function in APEX needs userid and password

Similar Messages

Maybe you are looking for