Copy of Internal Number Range of extended withholding tax

hi,
Can any one tell me the transaction code for copy of the Internal Number Range for extended withholding tax from one year to another year
points will be assigned
thanks in advance

hi,
use t.code:J1INUMBER
all the best
Prasad

Similar Messages

  • Error in J1INCHLN for internal number range

    Dear Experts,
    I am getting the below error when I am executing J1INCHLN. I checked J1INUMBER but of no use. Number range for 2008 is maintained. I am not able to maintain number range for 2009. Kindly guide.
    Number range for internal challan numbers not maintained
    Message no. 8I706
    Diagnosis
    Number range object 'J_1ICHLNNO' is not maintained fully.
    System response
    There is an error in the number range object and a new internal number can not be generated.
    Procedure
    Check if the number range object exists in your system and also check if number ranges for the number group is maintained for the current year. Maintain the number range object and then start this transaction. The transaction code for the number range maintenance is  'J1INUMBER'.
    Regards
    Komal

    Hi
    Go to SPRO>IMG>Financial Accounting (New)>Financial Accounting Global Settings (New)>Withholding Tax>Extended Withholding Tax>Posting>India>Remittance Challans>Maintain Number Groups
    here define - cocode , section , tds section code , number group
    now go
    SPRO>IMG>Financial Accounting (New)>Financial Accounting Global Settings (New)>Withholding Tax>Extended Withholding Tax>Posting>India>Remittance Challans>Assign Number Ranges to Number Groups
    here assign number group to Number range
    now create number range go to SPRO>IMG>Financial Accounting (New)>Financial Accounting Global Settings (New)>Withholding Tax>Extended Withholding Tax>Posting>India>Remittance Challans> Maintain Number Ranges
    here create a number range on year base
    **some time you have to update the table so go SM30 and update J_1IEWTNUM , J_1IEWTNUMGR and J_1IEWTNUMGR_1 tables
    Best Of Luck
    Tanmoy

  • Account group with Internal Number Range

    Hello Gurus,
    With Internal number range assignment to the Customer Account Group, I am unable to extend the customer from one sales area to another sales area with the same Customer number.
    If I am not it is a standard feature that irrespective of the number range (internal or external), with the same customer number, customer can be extended to multiple sales area.
    Please correct me if I am wrong and suggest a solution.
    Thanks in Advance

    Hello friends,
    No error message but the next number is getting allocated.
    in VD01 or XD01
    the following steps r followed.
    1. Enter the Account Group
    2. Sales Area (New Sales Area for the customer)
    3. Reference Customer.
    4. Reference Sales Area.
    Rather than going to the sales area directly, General area screens are appearing.
    Upon saving saving the details New customer number is getting allocated.
    I have no clue where I have gone wrong...
    looking forward for suggestions.
    Regards

  • Internal Number Range in EWT

    hi,
    some body tell me the transaction code for copy of the Internal Number Range for EWT  from one year to another year
    regards
    sapfan

    Hi,
    use t.code:J1INUMBER for internal challan number creation, u can't copy from one year to another year.
    regards
    sai krishna

  • SALES ORDER INTERNAL NUMBER RANGE

    Hi friends,
    I have a problem with Sales Order Number Range  with Doc Type SO(Standard Order) its about internal number range OBJECT ASSIGNED in document type is  01
    In VN01 for object 01 range assigned is from 01 to 999999 & current number range is 976832 which is about to finish ,
    Help me in this regards what r the steps involved in this as while saving order its already showing a warning error that number range is about to finish your earlier help will be appreciated & rewarded.
    Regards

    System will not allow overlaping of number range. As the number range is nearing to end of redefined, followinwing are the options:
    Option 1:
    Set number range for number range object 01 is 01 to 999999 . Check if the number range starting from 1000000 is free or already being used. If it is free & that number range is not being used else where, you can reduce the number range in it say number range object 02 is assigned number range from 1000000 to 1999999, you amend the number range to 1500000 to 1999999 & extend the number range fornumber range object 01 as 01 to 1499999.
    Option 2:
    If the following number range is in use, go to VOV8 --> select the Sales Document Type SO --> change number range object say 01 to say A1 & transport the same from Development to Test (QA) & then to Production Server. In the next step step maintain new number range (not overlaping) to say A1, number range being 10000000 to 19999999. The imapct of transporting the reauest of VOV8 transaction will be that you will have to maintain the new number range immediately & from very next Sales order, the new number range will be active.
    Hope this is useful input for you.
    Regards,
    Rajesh Banka
    Reward point if helpful.

  • Create vendor in ERP R/3 with internal number range

    HI,
    When I create a new vendor from MDM in R/3 with internal number range ADRMAS is processed OK but CREMDM is in status 51 because of missing address data.
    According to sap note  1052964 (se below) ADRMAS must be the first IDOC and it should contain the vendor number, but this is not possible with internal number range. How do you overcome this problem and how do I get the vendor number back to MDM?
    ALE inbound needs the customer / vendor account number within the ADRMAS IDoc to link the ADRMAS IDoc to the follwing DEBMAS / CREMAS IDoc correctly. Therefore field <OBJ_ID> in ADRMAS segment <E1ADRMAS> must contain exactly the same value as fields <KUNNR> / <LIFNR> in the corresponding DEBMAS / CREMAS IDoc. If this value is not provided, the Business Address Service stores the address but is unable to link the address later on to the corresponding Customer / Vendor.
    Kind regards
    Jonna

    We have worked around these problems in the past.  These are the steps we took:
    1.  We created a custom program to process a CREMDM IDOC.  This custom program was pretty simple.  It called the function module to process a CREMAS IDOC (IDOC_INPUT_CREDITOR) then did a committ.  The program captured the vendor number and then called the function module (IDOC_INPUT_ADRMAS) that processes an ADRMAS IDOC (It plugged in the previously captured Vendor number in the ADRMAS).
    2.  Using this custom program, it is not necessary in PI to split the CREMDM into a CREMAS and an ADRMAS.
    3.   The last step in the custom program kicked off transaction MDMV to trigger an outbound CREMDM IDOC back to MDM.  This was necessary to update the vendor number in MDM. 
    Tom Belcher

  • Internal Number Range in Vendor Master(XK01)

    Dear Gurus,
    During the Initial upload of vendor master in SAP the vendor codes around 3000 vendors were uploaded with an External Number range between 1000000 to 1999999 with an defined group. Now i want to deactivate the External Number range and move on to internal Number range.
    With Regards,
    Siddharth Poste

    Hi Siddarth Poste,
    In OMSJ T- code you can give the vendor no range  as internal or external
    Regards
    M B Raju

  • Internal Number range:Issue

    Hi,
    I am using the internal number range for the employee number creation.
    Scenario:
    Suppose I have created 13 employee in the organization so far.By mistake I created the wrong employee record(Employee number 00000013).
    Now when I delete any existing employee (say "John" with the employee number as 00000013) using the Tcode PU00, I face the following issue:
    I am able to delete the record (all the associated infotypes) successfully.
    Now when I try to re-create the employee using tcode PA40, it always creates the employee wtih the next number (00000014) and not with 00000013.
    I want the new correct employee to have the employee number as 00000013.
    Can you please advise?
    Regards
    Manish

    Go to Tcode PA04
    Click the Status  Delete 0000014  Current Number make it as 000013  and hire

  • Vendor Creation (Internal Number Range)

    Hi,
    My client was creating a new Vendor. The same has an internal number range.
    However, the last vendor created was 110016...... while creating a new vendor, the system assigned vendor 110020 as the next internal number, instead of 110017 to be assigned.
    Kindly assist as to why has this happened and where can i check the same?

    Thanks.......
    However that number range has not been assigned to other vendor group....
    Also, I have heard of number range buffering in SAP......What is that? How it works? Is there any T Code to check this buffering or any additional configuration is required?
    Kindly assist on the same........

  • Internal number range

    Hi All,
    I have defined the internal number ranges and assigned to vendor account group but when i create a vendor master  record the system allocating number randomly instead of serielly
    why this is happened ?
    Regards,
    Rajesh

    Hi,
    You may have Number range Buffer for Vendor No Range.
    goto T.code SNRO and check for Vendor number range.
    Hope this helps, please assign points.
    Thanks,
    Rau

  • Assingment of Internal Number Range to different type of Maintenance Order

    Hi..
          We are implementing SAP Plant Maintenance. We have created 10 order type. We want to assign 10 number ranges to the order types. During "Configuring of Number Range" t.code OION , when I am inserting new groups for all 10 type of order, it is not accepting by the group name. Number range which i am giving to the desired group is saved in other groups.
           Can anybody help to adopt the right process sothat I can assign the correct internal number range to different order types.
    Thanks in advance.
    Regards
    TP

    Hi Pramod,
                   Please follow the procedure mentioned below:
                  Configure number ranges.
                  1. In the menu bar go to Group & Insert
                  2. Enter the Text & the interval i.e number range.
                  3. Now add the new group using the symbol ( + )
                  4. once this is done the new group will be reflected.
                  5. Then select the element ( order type) i.e to be assigned using F2 key.
                  6. Enable the check box against the new group ( respective group)
                  7. Now in the menu bar press Element/Group tab ( or Use F5 key)
                  8. The selected element(order type) will be assigned to the particular group that you have
                      selected.
                  Hope this will help you resolve the problem.
    Thnaks & Regards
    Arun Vijay D

  • Internal number range for SP

    Hi All,
    Please help to find out why system does not assign continuous running number for new sold-to-party account group.Why Internal number range of sold-to-party assigned by system not in running sequence.
    Thanks & Regards,
    Pallavi

    Hi pallavi
    Go to OVT0 and select the sold to party account grp and and in that details you can see the number range field ,there you can check what number range has been assigned to the account group. Another way is go to OBD2 and check the sold to party account grp which number range has been assigned
    Regards
    Srinath

  • Internal number range( alphanumberic) will be incremented automatically

    Dear All,
    Will the internal number range (Alphanumberic)  of the material master get incremented automatically.
    say,
    the internal number range we set is AW0000001 to AW9999999. The number range should be incremented
    Kindly reply for the querry
    Thanks
    Bakyaraj

    You can try with material Template.
    SPRO --> Logisitics - General -- > Material Master --> Basic Settings -- > Define Out put format for Material Numbers.
    Transaction Code : OMSL
    Activities
    1. Define the length of your material numbers.
    2. If required, define a material number template.
    3. Specify the form in which you wish to store your material numbers.
    For information on how to use the Lexicographical indicator, be sure to read the corresponding documentation.
    4. Specify whether your material numbers are to contain leading zeros.
    Note
    If the Lexicographical indicator is set, the system ignores the setting of the Leading zeros indicator.
    Indicator for lexicographical material numbers
    Definition
    Defines the way numeric material numbers are stored in the database.
    Use
    Caution
    It is only possible to set or reset (cancel) this indicator if no numeric material numbers have been used yet in the system since they would no longer be interpretable after setting or resetting this indicator.
    If this indicator is not set, numeric material numbers are padded with leading zeros and stored right-justified (example 1). Material numbers containing at least one nonnumeric character are stored left-justified (example 2).
    Example 1
    Defined length: 8 characters
    Internally/externally assigned number: 123
    Stored number: 000000000000000123
    Example 2
    Defined length: 8 characters
    Externally assigned number: 1A3
    Stored number: 1A3
    If this indicator is set, material numbers are stored as follows:
    If the material number (numeric or not purely numeric) was assigned externally, it is stored left-justified as entered.
    Example
    Defined length: 8 characters
    Externally assigned number: 123
    Stored number: 123
    Note
    Any leading zeros that may have been entered are stored too. This makes it possible to distinguish between the material numbers 123 and 0123.
    If the material number (numeric only) was assigned internally, it is padded with leading zeros to the defined length and stored left-justified.
    Example
    Defined length: 8 characters
    Internally assigned number: 123
    Stored number: 00000123

  • Diiferenet Internal Number Ranges by Depot(Plant) wise

    Hi Experts,
    I have a requirement in SD for Different Internal Number ranges by Depot(plant wise.
    For example, my client having 8 depots(Plants). For each Depot client need different number range, means for depot 1 client need one range that is 9000 to 10000. For depot 2 client need number range like 10001 to 20000 like this for 8 depots but document type(sales order, billing, delivery, invoice) is same for 8 depots. How can i achieve this?
    As I am fresher I am not getting any clue. If any one did this please provide me the details how to achieve this.
    Thanks & Regards,
    Muralikrishna
    Moderator Message: Do some R&D of your own first.
    Edited by: kishan P on Nov 15, 2010 2:24 PM

    Hi Gnana Kumar,
    I seen this link, here mentioned that develop the z table with fields like VKORG, FKART, NUMKI. Can I add Depot(plant) filed also?
    and here client is having only one Sales Organization.
    Thanks & Regards,
    Muralikrishna

  • How to change internal number range into external number range

    Hi All,
    There is a number range in the system which was assigned internally by mistake earlier. Now, I want to change the internally assigned number range to external number range.
    Can anyone please let me know, the procedure to change used number range from internal number range to external number range and from external number range to internal number range.
    Quick reply will be appreciated & points will be assigned.
    Thanks & Regards,

    hi Mehak,
    you can try to simply change the range from ext to int (and vica versa). If that does not wrok, than you can delete the range and recreate it with proper settings. But you have to take into account that if you have a range as external from 1 to 10 and for example numbers 2 and 5 are taken already than you recreate the range 1..10 as internal, than you could have some problems. Probably best is in this case to recreate with other interval.
    hope this helps
    ec

Maybe you are looking for