Copy of service plan item SPLA in contracts not working

Hi,
1. I have created a service plan product SP (item category group SPLA)
2. I copied the standard trans SC -> ZSC and item category SPLA -> ZSPL
3. I then maintained the determination as per the standard.
I have not changed any of the attributes of ZSC and ZSPL from the standard (apart from the name). But when I enter the service plan product SP as a item in ZSP (ZSPL gets determined) but I do not get the planning relevant fields such as scheduling type, scheduling rule, etc... Instead I get tabs at the item level which are for a contract product and not a plan product.
Can someone pls tell me what could be wrong since there are absolutely no changes being done to the standard and plainly a copy is created.
Regards,
DP.

Were you able to resolve this issue. We are facing the same.
Thank you

Similar Messages

  • I am trying to open a service request and the site does not work.

    I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work. I've seen this problem before trying to file support requests. It's as if Apple simply does not want you to create requests.

    I just went through several screens and had no problems.  Try clearing your browser's cache and/or history.

  • I have bought  three iPhone 6  one for me and one each for my two kids  we have just done the update iOS 8.01 now all phone  do not connect to service provider and touch id is not working ,  APPLE HELP !!!!

    i phones  updated iso 8.01 all three phones  will not connect to service provider and touch id
    will not work  APPLE HELP !!!!!!!!!
    anyone know  i fix as  i have spent over 2000 pound on three phones that won't work
    all three where working fine until the 8.01 update

    Apple just pulled the update because it is a major fubar! You will have to rollback your iPhone to the base iOS 8 using iTunes and Apple needs to seriously test its patches!
    Update:
    Simply connect your phone to iTunes and back up your data. Then, click the “Restore iPhone” button and follow the on-screen instructions. It’s a huge pain, but at least it’s better than having your shiny new iPhone turned into a big expensive iPod touch.

  • HT5467 My location services in iPod Touch 5 is not working. Any help?? I really want to fix this issue.

    My location services in iPod Touch 5 is not working. Any help?? I really want to fix this issue.

    You do have it turned on ins settings>Privacy, right?
    For location the iPod uses the location of nearby wifi routers that are in Apple's database. You do not have to be connected to the network/router to use that router's location. Thus, it appears that the iPod can't see a nearby router that is in Apple's database. Apple continuously updated their database based on info they obtain from iPhones. No one has been able to find a way to inform Apple of a router or correct is location.
    You can confirm that by going to place with a know located router like Starbucks or McDonalds

  • I would like a refund now. I bought this service this morning and it does not work as advertised. Reliable is not what I would use to describe this product. Cancel my subscription/refund my money and send me an email to the address I used when I signed up

    I would like a refund now. I bought this service this morning and it does not work as advertised. Reliable is not what I would use to describe this product. Cancel my subscription/refund my money and send me an email to the address I used when I signed up.

    Hi,
    I just checked your account.
    Your Adobe Export pdf service has been cancelled & refunded.
    Regards,
    Florence

  • When i try to copy or paste text online by buttons its not works,maybe somebody can help me please-..:)

    when i try to copy or paste text online by buttons its not works,maybe somebody can help me please…..:)

    Resetting SMC may help.  http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • Service order Item category on Contract determination

    Hi
    We have contract determination on CRM service orders and it is working as expected. Our Service contract makes the Service order free of charge but its still generates the debit memo in ECC system with zero value.
    We don't want this to happen so a work around will to have the item categories different when the Service order has a contract. These item categories will not be configured for ECC billing integration in R/3 plug-in hence no debit memo will be generated.
    My question to Service gurus is that is there another way of achieving this? if not is there a way to flip the item category after contract determination without putting in any code.
    Thanks and Regards
    Rupesh Patil

    Rupesh,
    I dont think we can flip item category without coding..!. but certainly possible with coding.
    Regards, Sudeep..

  • Service line item History for Contracts with item cat - D and Acc Assg P

    Hello Gurus,
    We have a situation where we create contract with item category D (Service) and account assignment category P (Projects). And for the line items of the PO we have difference services (without a service master) and each service line item has the price and quantity and other required fields. Now it is required to change the price or the quantity or both for this service line time and again (business requirement).
    The task is to to track the price changes and the quantity changes that have happened to the serive line item from the original and we require the report to diplay the original price and the present price on the service line.
    The question is: Is there a standard report in SAP to handle this? Or which are the tables where a service line items history is stored so that it can lead to a development.
    Regards - SS

    Hi Pankaj,
    We are using a Percentage based case (Prorata case)
    For Eg : For Eg for 65% (65KAI )material Price 1000 Rs
    If the Purity percentage varies payment will be done as per the same. For eg : for 70% (70KAI ) Price 1200 Rs. (approx)
    In this case unit of measurement is KAI (kilo active ingredient) .
    Actually we are dealing with dealer price where duties are entered Inclusive of the total price and entered at the time of making GR. and the payment is made as per the same;
    we have one po for 5000 MT. where we received material at first time Qty being 1993 MT.The duties manuallyentered are as follows :BED :24,167.00
    AED : 7,076.00
    ECS : 483.00
    SECES : 242.00
    These duties are flowing correctly in MIRO
    and the MIRO has been Posted and payment is also made.
    But while the balance quantity 2982 kg we received next time and those duties are as flowing as follws:
    BED : 36160
    AED : 10587
    ECS : 723
    SECS : 362
    But here at the MIRO the following duties are flowing instead of above
    BED : 36,526.08
    AED : 10,694.18
    ECS : 730.32
    SECS : 365.66
    What might be the error at this stage.
    waiting for solution at the earliest .
    Regards,
    Girish.C.M.
    09377077122

  • The Create List Item workflow action does not work in document library with document template

    My end goal is more complex but below is a basic example of the issue I’m having that just simply does not work.
    I'm trying to use a site workflow to create an item in a document library that has a document template applied to it but the file that gets created by the workflow is corrupt and cannot be opened.
    I created a document library and edited the document template by adding some text to the header and changing it to a Word docx file instead of a Word dotx file. I tested the document template by clicking the files tab in the ribbon and then clicking new
    document which opens the document template in Word and allows me to edit and save the document back to SharePoint. Then I created a SharePoint 2013 site workflow in SharePoint Designer that contains a single Create List Item action, and that action creates
    an item in the document library with the name field statically defined. I published the workflow and then manually start it on the site. The workflow completes successfully and when I navigate to the document library the document has been created by the workflow.
    When I click on the document to open it in the Word Web App it throws the error pictured below and if I open it in the Word client application it just opens a blank document and not the correct document template.
    I also tried using a SharePoint 2010 workflow with pretty much the same results. Opening the document in Word Web App gives the same error as above and opening the document in the Word client application gives the error pictured below.
    Come on Microsoft creating a Word Document in a SharePoint Document Library from a SharePoint Workflow should just work! Is this a bug or does anyone have any ideas on what is causing the this issue?

    I had the same problem with corrupted document - this worked for me:
    1. Create a 2010 Workflow which creates the list element in a document library
    (you may start this workflow from your 2013 workflow if applicable)
    2. In the Create New List Item properties - make sure to set ContentTypeId to your content type
    ("Id for indholdstype" is Danish for "Contenttype ID")
    3. Your Content Type template should be a ".docx" file - NOT a ".dotx" file...!
    (I have always created my templates for content types as .dotx files - seems Microsoft wants us to use ordinary .docx files as template files for content types)
    Hope this helps you!

  • Web service proxy and data control are not working properly

    Hi,
    I am working on jDeveloper 11.1.1.6
    I have a SOA web service which requires 3 inputs and return with a set of data.
    When I tried testing that web service in soapUI it is working perfect. But when I have created a web service proxy in my application and trying to test it from class (*******_ptClient) main method everytime it is replying with the output null
    Also When I am requesting from the main method SOA is getting proper input (which I am providing in the main method) and SOA is returning proper output I have checked the SOA instance in em. So there is no problem in SOA side.
    After that I have created web service data control and tested in that case also it is not showing any result.
    What could be the problem ?
    Please help.
    Thanks
    --NavinK                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Hi Shay Shmeltzer,
    Thanks for the reply.
    I tried in HTTP Analyzer in JDeveloper and there also it is not working. My concern is :-
    There are many other web services deployed on the same SOA server in same partition and they are working fine in HTTP analyzer and I am able to create and use the web service proxy as well. So as per my understanding there is nothing like network issues between SOA server and jDeveloper.
    1 more thing When I am creating the proxy for this web service and requesting from the proxy's main method SOA is getting proper input (which I am providing in the main method) and SOA is returning proper output I have checked the SOA instance in em. So there is no problem in SOA side. The problem is jDeveloper is not able to get back that response which SOA is returning.
    Please Help.
    -- NavinK

  • Service order on CRM application is not working fine

    1. We have recently moved from 8.48.16 to 8.51.15 on CRM 8.8 .
    2. One of the deleivered feature on CRMUPG is not working. Navigation is as given below.
    a) http://mstn-v-iscdev2/psp/CRMUPG/?cmd=login
    b) click on " service order " on left hand side.
    c) Enter service order id (2000136) in Service Order id.
    d) click on " Insert IOP Facilities " in requested facilities section.
    e) After clicking CSOS link in facilities column on IOP Facility pane.
    The CSOS data is not reflecting in requested Facilities section.
    Plz check the issue and help the earliest.
    Details :- IE 8
    In Another environment,when i click on CSOS.
    I can see javascript:submitAction_win0(document.win0,'MSI_FACILITYNAM$0'); in below panel.
    while in the environment where i am facing issue show
    javascript:hAction_win0(document.win0,'MSI_FACILITYNAM$0', 0, 0, 'CSOS', false, true);

    Hi,
      How have you defined the property "WAS host" for the portal system that you have created for the back-end?
    You might get this error if the way you have defined this WAS host property and the way you are calling the portal are different. For example, if your WAS host property is "<hostname>:<portnumber>" and you are calling your portal as "localhost:<portnumber>", then you will get this error.
      Also are you connecting to your portal using the fully qualified domain name? Don't call the portal simply as
    <i>http://<host>:<port>/irj</i> but call it as http://<host>.<domain>:<port>/irj.
    Regards,
    Satyajit.

  • Cisco/IPsec VPN built-in service of 10.6.1 does not work!

    Hello,
    I have been using for a while in Leopard (10.5) the Cisco VPN client delivered by Cisco company until I upgrade to Snow Leopard (10.6.1) which comes with a native built-in Cisco VPN client and I gave it a try in order to replace my dedicated Cisco app.
    I set up the Cisco VPN service in System Preferences > Network with the same settings than those used in the Cisco client but the connection fails when it is launched from the 10.6 network VPN service... while it works perfect when launched from the Cisco app itself.
    I need to activate a VPN connection in order to connect from home to my enterprise server and I have to respect the VPN settings the network administrator of my enterprise put in place.
    Those are very common:
    1. Host name
    2. Group name + Group password
    3. Domain name\Userid + User password
    4. RSA pass code (random code provided by a specific RSA keyfob)
    5. Transport is IPsec over UDP
    According to my testings, I would say that:
    1. The connection to the host is OK.
    2. The validation of the group name + group psw is OK.
    3. The validation of the userid + user psw is OK.
    4. The RSA pass code is rejected.
    According to my enterprise network engineer's investigations, the possible reasons of the connection failure could be:
    1. the UDP protocol is not (well) supported by the client service.
    2. and/or the extended authentification phase (aka "Xauth") is not working as it should.
    As far as I can see in other VPN clients, there is usually an option to select whether the transport is run over TCP or over UDP. Unfortunately, I have not been able to find such option in 10.6.
    In my opinion, it could be either a bug or an (undesired) limitation of the Apple VPN service. In both cases, it requires a quick fix from Apple as, for time being, this issue prevents me and many of us connecting to our enterprise servers when we are far from its local network.

    Thank you for your answers which confirm the limitation of the Apple VPN solution to the TCP transport only.
    I have to say that I do not understand such a decision from Apple since the UDP protocol is very common in the enterprise world.
    I will thus have to rely on the Cisco app itself. Is the version 4.9.01 (0080) the correct one for SL as well?
    Thank you!

  • I have copied the  0datasource  to Zdatasource.but delta is not working

    Hi All,
    i have copied the datasource from 0ASSET_ATTR_TEXT to ZASSET_ATTR_TEXT. the init is working fine and the Delta is not working for this.
    while coping the datasource i have updated the tables
    Roosource, roosourcet, roosfeild. Is that enough,
    kindly help me on this
    regards
    KA
    Message was edited by: A K
    Message was edited by: A K

    Hi vishnesh,
    It is not a generic datasource, i have copied the datasource thru a Zprogram.
    and when i run the RSA3 for the F update mode for the Both datasources(Z and 0) they are perfect. but when i run for D mode it is getting the errors for both the daasources.
    Regards
    KA
    Message was edited by: A K

  • PR Item Level Release WF not working after Release Strategy change

    Hi Experts,
               I did PR item Level Release Standard Work flow and it was working fine now due to client requirement we changed the release strategy and now when the PR workflow triggers it gives the Below mentioned error.
    I really don't understand y after changing the release strategy workflow is not working and giving the following error.
    Even if i restart the workflow in SWPR the same error is occuring.
    Exception occurred    - Error when starting work item 000000390118
    PROCESS_NODE     - Error when processing node '0000000003' (ParForEach index 000000)
    CREATE                   -  Error when creating a component of type 'Step'
    CREATE_VIA_WFM  -  Agent determination for step '0000000003' failed
    EVALUATE_AGENT_VIA_RULE - Error in resolution of rule 'AC00000148' for step '0000000003'
    AC00000148             -  Object type 'TS' not valid
    Executing flow work item   - Work item 000000390118: Object FLOWITEM method EXECUTE cannot        be executed
    Executing flow work item   - Error when processing node '0000000003' (ParForEach index 000000)
    Regards,
    Hari

    Hello Hari,
    please set a breakpoint at function module
    ME_REL_GET_RESPONSIBLE
    and see what happends in section
        CASE t16fc-frgwf.
    * keine Ermittlung
          WHEN space.
            RAISE nobody_found.
    * Ermittlung über T16fW
          WHEN '1'.
    If using the T16FW-table, it should go to '1', otherwise it may that a user exit under '9' is used. So please check this.
    Best wishes,
    Florin

  • Item Level Permission does not work as designed

    Here is the problem. 
    We have a site with a site members group with created permission level called vnContributor that differs from contributor in that they cannot edit delete items or versions, or create alerts. 
    We have a site owners group who have a custom permission level called vnOwner that allows them to add, edit, delete, view, and open items and view versions.  They do not have "Manage Lists" 
    The list permission settings were set to view everyone and edit everyone.  In this setting, however members could not see or edit anything, and owners could see and edit everything, regardless of whether it was theirs or not. 
    So I changed the list permissions level to edit only their own and changed the members to the OOTB contributor permission level.  I then opened the calendar and added a new item as a user in the members  group.
    There was no change.  Members still could not edit their items.  Owners could see and edit everyone's items.
    This is not how this is advertised to work. 
    ERJ MCSD MCDBA

    On June 11, 2008 Rachel.lane entered the following request
    "I would like to hide/show the edit button on a list item's edit form based on whether the user is the item's creator.  The reason I want to do this is because SharePoint's out-of-the-box behaviour is such that when a user edits someone
    else's item, the Access Denied page pops up AFTER the user makes his/her edits and presses ok.
    " My users want the edit button to be hidden so they don't have to go through the steps of making the edits, press ok, and then find out their access is denied."
    My users want the same thing. 
    Alex Santos1 said that "One approach is to give each list item it's own permission- giving the owner (creator) full access while giving everyone else read access."
    However everything I seen about giving item level permission seems to utilize the method I've already been doing which does not hide the Edit button.  Does anyone know how to pull off what he was suggesting?
    ERJ MCSD MCDBA

Maybe you are looking for