Copy of standard SAP MC1 Report
Hi All,
I copied the standard SAP MC1 report i.e. RMCB0100. In this report they show the data according to month for that they have select option o selection screen i.e. MONTH I want the report according to period. for that I replace the moth by period but still I ma getting the data according to month. In our organization fiscal year is start from April. and current fiscal year is 2008.
So where I need to change in standard report.
Thanks
Hello Atish,
It's copy of standard program in this for getting period field on selection screen I have to pass the period table only after that it's it replace the month by period and take care of all select quries.
In standard program they are passing the table S039 which is taken from TMC4 table and it's table for month. Now I am passing Period table i.e S001 from TMC4 only.
Thanx.
Similar Messages
-
COPY THE STANDARD SAP MODULE POOL PROGRAM
HOW I CAN COPY THE STANDARD SAP MODULE POOL PROGRAM ((INCLUDING SCREENS) INTO Z REPORT?
Hi,
Go to transactionSE38 ABAP Editor.Type the program name.Click copy.It will ask whether you want copy documentation,screens,etc.,
Check mark it. -
How to add new customise field in standard SAP ME28 Report?
Hi Anybody,
How to add new customise field inside Standard SAP Screen report ME28?.
Anybody, Please tell me how to do?.
Thanks,
Regards,
S.Muthu.Hi Subramaniyam,
You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field. -
How to perform system copy using standard sap method (sapinst)
Hi guys
pls tel how to perform system copy using standard sap method (sapinst) and to perform enterprise portal RESTORSTION.
thanks
kamalHi Kamal,
I have done a system copy of the production portal to a sandpit system before. The system copy export import method works very well, and is easy. For my portal, the whole procedure took me less than 6 hours.
1. Go to this page: System Copy and Migration
2. See the videos "Demo: How to Perform a System Copy Export" and "Demo: How to Perform a System Copy Import".
This should give you the basic idea.
I did a systemcopy using sapinst. If I remember right, this is the steps I performed:
1. On target host, Installed a new Central services.
2. On source host: Ran sapinst system copy export for Central Instance and Database instance. This created two export files (depending on your database size).
3. Used the export files created in previous step to run the import step in target host.
4. Some post processing steps, like configuring sso, creating systems in system landscapes, configuring WD JCos etc.
Let me know if you need more help.
Cheers
Rishi -
Difference between standard SAP asset report and BW report
Hi
We are finding differences between the standard Asset report and the BW report which is extracted via standard SAP extractor. Could anyone guess what would be the reason for this?? I ran the report - AW01N
Please revert at once as this is very urgent.
Regards,
prasadHi Prasad,
A number of reasons could be responsible for this. Check the following:
1. If some posting were done in R/3 just before running your BW report, you may have to re-extract the data into BW as this would no longer be current. The thumb rule is to always allow at least <b>45</b> minutes to <b>1</b> hour between when the last transaction in R/3 was posted before re-extraction. This is to allow SAP Logical Unit of Work(LUW) to have been committed to the R/3 database.
2. There may have been some restrictions on the selection variables in the BW query. Check the Query Designer, just to be sure there are no restrictions.
I hope the above help.
Do not forget to award the points please.
Regards,
Jacob -
Standard SAP Cost Report which captures costs incurred for replacementgoods
Hi Friends,
We want to track the costs related to the Replacement of goods sold free of charge and under warranty shipped to our customers. We are currently using the field "Usage" on the item level of the sales order.The item category created within the Sales Order is either ZST0 or ZMO0.
Unfortunately, I can't find any report in which the field "Usage" would be presented along the costs related to the item. The report I'm looking for would be used to evaluate, on a given period of time (ex. Fiscal Year or a month), the total costs associated to the replacement units by sales order item.
1) An existing report (which I have not found) exists, please let me know which one
2) There is another way to track such costs within SAP.
Please let me know if there is a standard report which tracks costs related to replacement goods.Hi,
I got the required from MBEWH table.
Thanks
Aravind -
Facing problem in copy of standard SAP program
hi,,,,,,,,,,,,
when i execute this program in production server it displays an error ....i m trying to find out this error but this type(error) i cudnt find plz help me .....
i m sending the documents which i rcvd from the system after the execution of this program.
this program executes perfctlly in developmnt server but it creates problem in production server,,,i searched out the type kkblo_t_sortinfo in the whole program but i cud nt find it ,,,,,,,,,
documents.....
Runtime Errors SYNTAX_ERROR
Date and Time 18.11.2006 12:01:19
ShrtText
Syntax error in program "ZVISA_RM07MLBD ".
What happened?
Error in ABAP application program.
The current ABAP program "????????????????????????????????????????" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "ZVISA_RM07MLBD ", the following syntax error occurred
in the Include "RM07MLBD_FORM_01 " in line 1805:
The type KKBLO_T_SORTINFO" is unknown."
also i m sending the include program ver i m facing problem...*&----
*& Include RM07MLBD_FORM_01 *
correction Aug. 2005 MM "n856424
- the fields "entry time", "entry date", and "User" are "n856424
are not filled filled for price change documents "n856424
MB5B improved regarding accessibilty "n773673
Improvements : March 2003 MM "n599218
- print the page numbers "n599218
- send warning M7 393 when user deletes the initial "n599218
display variant "n599218
- show the current activity and the progress "n599218
contains FORM routines without preprocessor commands and "n547170
no text elements "n547170
*& Form INITIALISIERUNG
Vorbelegung der Anzeigevariante *
form initialisierung.
repid = sy-repid.
variant_save = 'A'.
clear variante.
variante-report = repid.
Default-Variante holen:
def_variante = variante.
call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
exporting
i_save = variant_save
changing
cs_variant = def_variante
exceptions
not_found = 2.
if sy-subrc = 0.
save the initial, e.g. default variant "n599218
move def_variante-variant to alv_default_variant. "n599218
p_vari = def_variante-variant.
endif.
print-no_print_listinfos = 'X'.
endform. " INITIALISIERUNG
*& Form AKTUELLE_BESTAENDE
Ermittlung der aktuellen eigenen Bestände,
d.h. der bewerteten Bestände und des Retourensperrbestandes,
auf Lagerortebene und auf Material- bzw. Chargenebene;
folgende Sonderbestände können gesondert ausgewiesen werden:
Lohnbearbeitung ( Sonderbestandskennzeichen O )
Kundenkonsignation ( " V, W, M )
Lieferantenkonsignation ( " K )
Projektbestand ( " Q )
Kundenauftragsbestand ( " E )
form aktuelle_bestaende.
delete the range tables for the creation of table g_t_organ
if g_t_organ[] is initial. "n433765
refresh : g_0000_ra_werks, g_0000_ra_bwkey, g_0000_ra_bukrs.
clear : g_0000_ra_werks, g_0000_ra_bwkey, g_0000_ra_bukrs.
endif.
if bwbst = 'X'.
select the valuated stocks
perform aktuelle_bst_bwbst.
elseif lgbst = 'X'.
all own stock from storage locations or batches
if xchar = ' '.
perform aktuelle_bst_lgbst_mard.
elseif xchar = 'X'.
perform aktuelle_bst_lgbst_xchar.
endif.
elseif sbbst = 'X'.
special stocks
case sobkz.
when 'O'.
perform aktuelle_bst_sbbst_o.
when 'V' or 'W'.
perform aktuelle_bst_sbbst_v_w.
when 'K' or 'M'.
perform aktuelle_bst_sbbst_k_m.
when 'Q'.
perform aktuelle_bst_sbbst_q.
when 'E'.
perform aktuelle_bst_sbbst_e.
when others.
Angegebener Sonderbestand nicht vorhanden.
message s290.
perform anforderungsbild.
endcase.
endif.
create table g_t_organ with the plants and valuation areas from
the database selection if table g_t_organ is empty
perform f0000_create_table_g_t_organ
using c_no_error.
endform. "aktuelle_bestaende.
*& AKTUELLE_BST_LGBST_MARD
form aktuelle_bst_lgbst_mard.
eigener Bestand auf Lagerortebene -
... auf Materialebene -
select * from mard into corresponding fields of table imard
where werks in g_ra_werks
and lgort in g_ra_lgort
and matnr in matnr.
if sy-subrc ne 0. "no records found ?
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
does the user has the the authority for the found entries ?
loop at imard.
perform f9000_auth_plant_check
using imard-werks.
if g_flag_authority is initial.
delete imard.
else.
perform f9200_collect_plant using imard-werks.
perform f9400_material_key using imard-matnr.
endif.
endloop.
describe table imard lines g_f_cnt_lines.
if g_f_cnt_lines is initial. "no records left ?
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
if not charg-low is initial or not charg-high is initial.
clear charg.
message w285.
Charge wird zurückgesetzt.
endif.
endform. "aktuelle_bst_lgbst_mard
AKTUELLE_BST_LGBST_XCHAR
form aktuelle_bst_lgbst_xchar.
read the stock table mchb for batches
select * from mchb into corresponding fields of table imchb
where werks in g_ra_werks
and lgort in g_ra_lgort
and matnr in matnr
and charg in charg.
describe table imchb lines g_f_cnt_lines.
if g_f_cnt_lines is initial. "no records found ?
message s821 with matnr werks lgort.
Keine Chargen zu Material & in Werk & Lagerort & vorhanden.
perform anforderungsbild.
endif.
process working table with the batches
loop at imchb.
does the user has the the authority for the found entries ?
perform f9000_auth_plant_check
using imchb-werks.
if g_flag_authority is initial.
delete imchb.
else.
perform f9200_collect_plant using imchb-werks.
perform f9400_material_key using imchb-matnr.
endif.
endloop.
endform. "aktuelle_bst_lgbst_xchar
AKTUELLE_BST_SBBST_O
form aktuelle_bst_sbbst_o.
process Special Stocks with Vendor
Bemerkung: Im Gegensatz zu den anderen Sonderbeständen existieren
der Lohnbearbeitungs- und Kundenkonsignationsbestand
nur auf Werksebene.
select * from mslb into corresponding fields of table xmslb
where werks in g_ra_werks
and matnr in matnr
and charg in charg
and sobkz = 'O'.
if sy-subrc <> 0. "no records found ?
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
process the found records special stock vendor
loop at xmslb.
check the authority
perform f9000_auth_plant_check
using xmslb-werks.
if g_flag_authority is initial.
delete xmslb.
else.
fill range table g_0000_ra_werks if it is still empty
perform f9200_collect_plant using xmslb-werks.
perform f9400_material_key using xmslb-matnr.
endif.
endloop.
error, if no records are left
describe table xmslb lines g_f_cnt_lines.
if g_f_cnt_lines is initial.
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
sort xmslb.
loop at xmslb.
move-corresponding xmslb to imslb.
collect imslb.
endloop.
free xmslb. refresh xmslb.
if xchar = ' '.
loop at imslb.
move-corresponding imslb to imslbx.
collect imslbx.
endloop.
sort imslbx.
elseif xchar = 'X'.
loop at imslb.
check imslb-charg is initial.
delete imslb.
endloop.
endif.
endform. "aktuelle_bst_sbbst_o.
AKTUELLE_BST_SBBST_V_W
form aktuelle_bst_sbbst_v_w.
Sonderbestand Kundenkonsignation -
elseif sobkz = 'V' or sobkz = 'W'.
select * from msku into corresponding fields of table xmsku
where werks in g_ra_werks
and matnr in matnr
and charg in charg
and sobkz eq sobkz.
if sy-subrc <> 0. "no records found
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
process Special Stocks with Customer
loop at xmsku.
perform f9000_auth_plant_check using xmsku-werks.
if g_flag_authority is initial.
delete xmsku.
else.
perform f9200_collect_plant using xmsku-werks.
perform f9400_material_key using xmsku-matnr.
endif.
endloop.
describe table xmsku lines g_f_cnt_lines.
if g_f_cnt_lines is initial. "no records found
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
sort xmsku.
loop at xmsku.
move-corresponding xmsku to imsku.
collect imsku.
endloop.
free xmsku. refresh xmsku.
if xchar = ' '.
loop at imsku.
move-corresponding imsku to imskux.
collect imskux.
endloop.
sort imskux.
elseif xchar = 'X'.
loop at imsku.
check imsku-charg is initial.
delete imsku.
endloop.
endif.
if sy-subrc ne 0.
message s042. "#EC * "n443935
Charge ist nicht vorhanden.
perform anforderungsbild.
endif.
endform. "aktuelle_bst_sbbst_v_w
AKTUELLE_BST_SBBST_K_M
form aktuelle_bst_sbbst_k_m.
Sonderbestand Lieferantenkonsignation -
elseif sobkz = 'K' or sobkz = 'M'.
select * from mkol into corresponding fields of table xmkol
where werks in g_ra_werks
and lgort in g_ra_lgort
and matnr in matnr
and charg in charg
and sobkz eq sobkz.
if sy-subrc <> 0. "no records found
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
process Special Stocks from Vendor
loop at xmkol.
perform f9000_auth_plant_check using xmkol-werks.
if g_flag_authority is initial.
delete xmkol.
else.
perform f9200_collect_plant using xmkol-werks.
perform f9400_material_key using xmkol-matnr.
endif.
endloop.
describe table xmkol lines g_f_cnt_lines.
if g_f_cnt_lines is initial. "no records found
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
sort xmkol.
loop at xmkol.
move-corresponding xmkol to imkol.
collect imkol.
endloop.
free xmkol. refresh xmkol.
if xchar = ' '.
loop at imkol.
move-corresponding imkol to imkolx.
collect imkolx.
endloop.
sort imkolx.
elseif xchar = 'X'.
loop at imkol.
check imkol-charg is initial.
delete imkol.
endloop.
endif.
if sy-subrc ne 0.
message s042. "#EC * "n443935
Charge ist nicht vorhanden.
perform anforderungsbild.
endif.
endform. "aktuelle_bst_sbbst_k_m.
AKTUELLE_BST_SBBST_Q
form aktuelle_bst_sbbst_q.
Projektbestand -
elseif sobkz = 'Q'.
select * from mspr into corresponding fields of table xmspr
where werks in g_ra_werks
and lgort in g_ra_lgort
and matnr in matnr
and charg in charg
and sobkz eq sobkz.
if sy-subrc <> 0. "no record found
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
process project stock
loop at xmspr.
perform f9000_auth_plant_check using xmspr-werks.
if g_flag_authority is initial.
delete xmspr.
else.
perform f9200_collect_plant using xmspr-werks.
perform f9400_material_key using xmspr-matnr.
endif.
endloop.
describe table xmspr lines g_f_cnt_lines.
if g_f_cnt_lines is initial. "no record left
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
sort xmspr.
loop at xmspr.
move-corresponding xmspr to imspr.
collect imspr.
endloop.
free xmspr. refresh xmspr.
if xchar = ' '.
loop at imspr.
move-corresponding imspr to imsprx.
collect imsprx.
endloop.
sort imsprx.
elseif xchar = 'X'.
loop at imspr.
check imspr-charg is initial.
delete imspr.
endloop.
endif.
endform.: "aktuelle_bst_sbbst_q
AKTUELLE_BST_SBBST_E
form aktuelle_bst_sbbst_e.
Kundenauftragsbestand -
select * from mska into corresponding fields of table xmska
where werks in g_ra_werks
and lgort in g_ra_lgort
and matnr in matnr
and charg in charg
and sobkz eq sobkz.
if sy-subrc <> 0. "no records found
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
process Sales Order Stock
loop at xmska.
perform f9000_auth_plant_check using xmska-werks.
if g_flag_authority is initial.
delete xmska.
else.
perform f9200_collect_plant using xmska-werks.
perform f9400_material_key using xmska-matnr.
endif.
endloop.
describe table xmska lines g_f_cnt_lines.
if g_f_cnt_lines is initial. "no records left ?
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
sort xmska.
loop at xmska.
move-corresponding xmska to imska.
collect imska.
endloop.
free xmska. refresh xmska.
if xchar = ' '.
loop at imska.
move-corresponding imska to imskax.
collect imskax.
endloop.
sort imskax.
elseif xchar = 'X'.
loop at imska.
check imska-charg is initial.
delete imska.
endloop.
endif.
endform. "aktuelle_bst_sbbst_e
*& Form TABELLEN_LESEN
Lesen der Materialkurztexte (Tabelle MAKT), *
der Mengeneinheiten (Tabelle MARA) und *
Mengen- und Wertfortschreibung zum Material (Tabelle T134M) *
(Letzteres ist zum Aussortieren der unbewerteten bzw. *
kontierten Warenbewegungen notwendig) *
form tabellen_lesen.
if not g_t_mat_key[] is initial. "n451923
select the material masters
select matnr meins mtart from mara
into corresponding fields of table imara
for all entries in g_t_mat_key
where matnr = g_t_mat_key-matnr.
select the short text for all materials
take only the necessary fields "n451923
select matnr maktx from makt "n451923
into corresponding fields of table g_t_makt "n451923
for all entries in g_t_mat_key
where matnr = g_t_mat_key-matnr
and spras = sy-langu.
sort imara by matnr. "n451923
sort g_t_makt by matnr. "n451923
free g_t_mat_key.
endif.
data: begin of k1 occurs 0,
mtart like t134m-mtart,
end of k1.
refresh k1.
loop at imara.
k1-mtart = imara-mtart.
collect k1.
endloop.
if not k1[] is initial. "n451923
select * from t134m
into corresponding fields of table it134m
for all entries in k1 where mtart = k1-mtart
and bwkey in g_ra_bwkey.
endif. "n451923
loop at it134m.
read table organ with key bwkey = it134m-bwkey.
perform f9300_read_organ
using c_bwkey it134m-bwkey.
if sy-subrc ne 0.
delete it134m.
endif.
endloop.
To find postings with valuation string, but without relevance for
the valuated stock, Big-G recommended this logic:
Take lines from MSEG where for the combination BUSTW/XAUTO=XBGBB
there is an entry in T156W with key BSX.
select bustw xbgbb from t156w
into corresponding fields of table it156w
where vorsl = 'BSX'.
sort it156w by bustw xbgbb.
delete adjacent duplicates from it156w.
delete it156w where bustw = space.
endform. " TABELLEN_LESEN
*& Form UNBEWERTET_WEG
Löschen der unbewerteten Materialien aus der internen *
Tabelle IMBEW
form unbewertet_weg.
sort it134m by bwkey mtart. "n451923
"n450764
delete the materials in plants without valuation "n450764
loop at g_t_mbew into g_s_mbew. "n450764
read table imara "n450764
with key matnr = g_s_mbew-matnr "n450764
binary search. "n450764
"n450764
read table it134m with key bwkey = g_s_mbew-bwkey "n450764
mtart = imara-mtart binary search.
if sy-subrc ne 0.
message ...
delete g_t_mbew. "n450764
else.
if it134m-wertu = ' '.
delete g_t_mbew. "n450764
else. "n450764
enrich the entries with the quantity unit "n450764
move imara-meins to g_s_mbew-meins. "n450764
modify g_t_mbew from g_s_mbew "n450764
transporting meins. "n450764
endif.
endif.
endloop.
endform. " UNBEWERTET_WEG
*& Form FI_BELEGE_LESEN *
Lesen der Buchhaltungsbelege *
Beim Erfassen der Werte ist es notwendig, die Buchhaltungsbelege *
zum Material zu lesen, um abweichende Werte zwischen Wareneingang *
und Rechnungseingang sowie Nachbelastungen zu berücksichtigen. *
form fi_belege_lesen.
Not related to note 184465, but a significant performance issue
if ORGAN is large due to many plants/storage locations.
data: begin of t_bwkey occurs 0, "184465
bwkey like bsim-bwkey, "184465
end of t_bwkey. "184465
loop at g_t_organ where keytype = c_bwkey.
move g_t_organ-bwkey to t_bwkey-bwkey.
collect t_bwkey. "184465
endloop. "184465
read table t_bwkey index 1. "184465
check sy-subrc = 0. "184465
select * from bsim "n443935
into corresponding fields of table g_t_bsim_lean "n443935
for all entries in t_bwkey where bwkey = t_bwkey-bwkey
and matnr in matnr
and bwtar in bwtar
and budat >= datum-low.
loop at g_t_bsim_lean into g_s_bsim_lean. "n443935
perform f9300_read_organ
using c_bwkey g_s_bsim_lean-bwkey. "n443935
if sy-subrc is initial.
record found : the user has the authority, go on
move g_s_organ-bukrs to g_s_bsim_lean-bukrs. "n443935
modify g_t_bsim_lean from g_s_bsim_lean "n443935
transporting bukrs. "n451923
create working table with the keys for the FI documents
move-corresponding g_s_bsim_lean "n443935
to g_t_bkpf_key. "n443935
append g_t_bkpf_key.
else.
delete g_t_bsim_lean. "n443935
endif.
endloop.
endform. " FI_BELEGE_LESEN
*& Form BELEGE_SORTIEREN
Die Materialbelege werden anhand des Buchungsdatums sortiert.
Die Materialbelege mit Buchungsdatum zwischen 'datum-high'
und dem aktuellen Datum werden in der internen Tabelle IMSWEG
gesammelt, während die Materialbelege mit Buchungsdatum
zwischen 'datum-low' und 'datum-high' in der internen Tabelle
IMSEG verbleiben.
form belege_sortieren.
aktdat = sy-datlo + 30.
if not ( datum-high is initial or datum-high > aktdat ).
loop at g_t_mseg_lean into g_s_mseg_lean
where budat > datum-high.
move-corresponding g_s_mseg_lean to imsweg.
append imsweg.
delete g_t_mseg_lean.
endloop.
endif.
describe table imsweg lines index_2.
endform. " BELEGE_SORTIEREN
*& Form KONTIERT_AUSSORTIEREN
Aussortierung der kontierten Belegpositionen, *
da diese Mengen nicht bestandsrelevant sind *
form kontiert_aussortieren.
process table g_t_mseg_lean
loop at imseg where kzvbr <> space and "144845
( kzbew = 'B' or kzbew = 'F' ). "144845
read table imara with key matnr = imseg-matnr.
read table it134m with key mtart = imara-mtart.
if not it134m-mengu is initial and not it134m-wertu is initial.
Die Felder 'mengu' und 'wertu' (Mengen- bzw. Wertfortschreibung)
sind ab Release 3.0 D auch in die Tabelle MSEG aufgenommen.
Die Einträge in der Tabelle T134M stellen nach wie vor die generelle
Einstellung dar; auf Positionsebene sind jedoch Abänderungen möglich,
die anhand der Einträge in der Tabelle MSEG nachverfolgt werden
können.
delete imseg.
endif.
endloop.
data : l_f_bwkey like t001k-bwkey. "n497992
sort it134m by bwkey mtart. "n497992
loop at g_t_mseg_lean into g_s_mseg_lean
where kzvbr <> space
and ( kzbew = 'B' or kzbew = 'F' ).
get the valuation area "n497992
if curm = '3'. "n497992
valuation level is company code "n497992
if g_s_mseg_lean-bukrs is initial. "n497992
get the valuation area for this plant "n497992
perform f9300_read_organ "n497992
using c_werks g_s_mseg_lean-werks. "n497992
"n497992
move g_s_organ-bwkey to l_f_bwkey. "n497992
else. "n497992
move g_s_mseg_lean-bukrs to l_f_bwkey. "n497992
endif. "n497992
else. "n497992
valuation level is plant "n497992
move g_s_mseg_lean-werks to l_f_bwkey. "n497992
endif. "n497992
read table imara with key matnr = g_s_mseg_lean-matnr
binary search.
if sy-subrc is initial.
read table it134m with key bwkey = l_f_bwkey "n497992
mtart = imara-mtart "n497992
binary search.
if sy-subrc is initial.
if not it134m-mengu is initial and
not it134m-wertu is initial.
delete g_t_mseg_lean.
endif.
endif.
else.
delete g_t_mseg_lean.
endif.
endloop.
endform. " KONTIERT_AUSSORTIEREN
*& Form BELEGE_ERGAENZEN (engl. enrich documents)
Material documents and FI documents from BSIM are merged together.
Complications:
- A material document can have more than one FI document.
- There are FI documents without material documnts
- There are material documents without FI documents
- The document type is customizeable
- There is no link from the materia document position to
the FI document entry in BSIM (except URZEILE, but this
can be filled incorrectly)
form belege_ergaenzen. "Version from note 204872
- show the current activity and the progress "n599218
call function 'SAPGUI_PROGRESS_INDICATOR' "n599218
exporting "n599218
text = text-061. "Reading FI documents "n599218
Eliminate material documents with valuation string, but without
relevance to the valuated stock. IT156W contains all valuation
strings with posting key BSX. XBGBB says: "I am an accrural posting".
For more details please ask Big-G.
loop at g_t_mseg_lean into g_s_mseg_lean.
special processing for tied empties active ? "n497992
if not g_cust_tied_empties is initial. "n497992
look for MM documents with xauto = L and change "n497992
indicators "n497992
case g_s_mseg_lean-xauto. "n497992
when 'X'. "n497992
when space. "n497992
when others. "n547170
range table g_ra_xauto contains the special "n547170
indicators for the transfer movements of the "n547170
tied empties "n547170
if g_s_mseg_lean-xauto in g_ra_xauto. "n547170
move g_s_mseg_lean-xauto "n497992
to g_s_mseg_lean-retail. "n497992
clear g_s_mseg_lean-xauto. "n497992
modify g_t_mseg_lean from g_s_mseg_lean "n497992
transporting xauto retail. "n497992
endif. "n547170
endcase. "n497992
endif. "n497992
read table it156w with key
bustw = g_s_mseg_lean-bustw
xbgbb = g_s_mseg_lean-xauto
transporting no fields
binary search.
if sy-subrc <> 0.
delete g_t_mseg_lean.
else. "n443935
enrich the current entry with the company code "n443935
perform f9300_read_organ "n443935
using c_werks g_s_mseg_lean-werks. "n443935
"n443935
check : sy-subrc is initial. "n443935
move g_s_organ-bukrs to g_s_mseg_lean-bukrs. "n443935
modify g_t_mseg_lean from g_s_mseg_lean "n443935
transporting bukrs. "n451923
endif.
endloop.
For all available FI documents from BSIM, read the header data
from BKPF to get the link to the originating material document.
if not g_t_bkpf_key[] is initial.
look for the header of the matching FI documents
sort g_t_bkpf_key by bukrs belnr gjahr.
delete adjacent duplicates from g_t_bkpf_key.
save result from database selection into global hashed "n856424
table g_t_bkpf "n856424
select * from bkpf "n856424
into corresponding fields of table g_t_bkpf "n856424
for all entries in g_t_bkpf_key
where bukrs = g_t_bkpf_key-bukrs
and belnr = g_t_bkpf_key-belnr
and gjahr = g_t_bkpf_key-gjahr.
if sy-subrc is initial.
create working table l_t_keytab_m
free g_t_bkpf_key.
loop at g_t_bsim_lean into g_s_bsim_lean. "n443935
enrich the working table g_t_bsim_lean with the "n443935
MM doc info "n443935
"n443935
look for the matching FI document header "n443935
read table g_t_bkpf assigning "n856424
with key bukrs = g_s_bsim_lean-bukrs "n443935
belnr = g_s_bsim_lean-belnr "n443935
gjahr = g_s_bsim_lean-gjahr. "n443935
"n443935
if sy-subrc is initial. "n443935
enrich table G_T_BSIM_LEAN with the MM doc "n443935
consider only FI docs created by MM docs here "n856424
check :Hi Ravi,
possibly a service pack has been installed just in the time when you created the copy. I found
data: lt_sort type kkblo_t_sortinfo. "n890109
in the include mentioned on our system. Please check if the includes are identical in development and production server (remote-compare from editor).
But we also have a copy of this in our system. In the copy I found type name like alv_type_sortinfo but no kkblo_t_sortinfo.
Note KKBLO was the predecessor of ALV.
Must have to dio something with version changed by service pack.
Regards,
Clemens -
Hi all
I have a requirement for some planning reports and I am hoping to find them in standard ECC.
Can anyone let me know if they are aware of what is available to meet the following;
Coverage reports or shorage reports at the component level
Waterfall reporting
thanksHi
Did you try CO09 or MD46?
Kindly revert back -
dear all,
does standard reports contain any reports related to counter (reading/difference etc)?
where i can find PM Standard reports and how they are executed ?
please give useful link if there is any,
Thanks and regards
Edited by: Pravin on Nov 20, 2008 11:20 AMHi Pravin,
Type "SAP1" in the command field (where we types the t Codes). It will filter all other transaction codes from all the nodes and will give you only the Report for each node.
Hope it will help you.
Regards,
Shyamal -
Standard SAP HR report to give output on change in fields values
Hi
Is there any starndard report in sap hr which will give output on changes on the infotype fileds for given two dates.Hi,
Use FM HR_INFOTYPE_LOG_GET_DETAIL .
Regards,
Srini. -
How to generate profile which has been copied from standard SAP profile
Hi gurus,
I have to assign some profiles to users.So I copied them through SU02.
I saved those profiles and activated also. But I unable to generate them.
Plz advise me
ThanxHi,
Try with the following Tcodes related to authorizations,uses,etc,,
SUUM Global User Manager
SUUMD Display User Administration
SU01 User Maintenance
SU01D User Display
SU02 Maintain Authorization Profiles
SU03 Maintain Authorizations
SU05 Maintain Internet Users
SU10 User Mass Maintenance
SU20 Maintain Authorization Fields
SU21 Maintain Authorization Objects
SU22 Auth. Object Usage in Transactions
SU24 Auth. Obj. Check Under Transactions
SU25 Upgrade Tool for Profile Generator
SU26 Upgrade Tool for Profile Generator
SU3 Maintain Users Own Data
SU53 Evaluate Authorization Check
SU56 Analyze User Buffer
SU84 Read Archived User Change Documents
SU85 Read Archived Password Change Doc.
SU86 Read Profile Change Documents
SU87 Read Authorization Change Documents
Regards
Arani Bhaskar -
How to copy standard SAP report to a Z report?
Hi All,
Guys, I have a requirement to copy an standard SAP report and make some changes to it. Please let me know how to copy a standard SAP report as a Z report. Is there any simple way or will I have to open the source code and copy it into the new Z program? If that is the case, how will I copy the screens and related PBO/PAI events?
Please provide me a step-by-step solution.
Thanks & Regards,
MadhurHello Madhur,
As Raja had said, yuo could just copy the program from SE38. But just remember a few points:
1. If the standard report is being used in some other programs, then there's no way you can make your Z-report get used in all such instances. I suspect that you may not want to do that anyways, but just in case.
2. Just also check out if the standard report you're talking about has any INCLUDE programs within it. If there are too many standard INCLUDEs in the main report, then you might have to decide whether you need to copy all of them too, or let them be as they are.
3. You are likely to have some problems with the text-elements and translation that may have been maintained for the original report.
I have experienced some problems with respect to the second and third points in the past, so it is worth it to be a bit careful.
Regards,
Anand Mandalika.
Regards,
Anand Mandalika. -
Generating standard SAP report
Hello experts
I am trying to generate standard SAP 8D report using action box (Request 8D report).I am using Std SAP notif type F2.
I am able to fill section 1 and 2 (1.Reference 2.Defect description).
I am unable to fill section 3-8 . I looked at the thread where there are some comments about SORT sequence number. I have done that by double clicking on defect item (catalog type 9). I beleive I have missed somethings.
Appreciate if somebody could advise me step by step to fill sections 3 to 8 in 8D report.
Many Thanks
GauravResolved
-
Graphical representation of standard SAP reports
Hi,
Can we get graphical representation of Standard SAP CO Reports? Is there any setting that has to be activated to get these? We are using FI, CO & MM.
Regards,
SangeetaDear Sangeeta,
This refered report is prepared through report painter. Transaction code GRR1-2-3. Graphical representation facility is available only in drilldown reporting which was used in FI module but not in CO.e.g. to see & modify GL related repots transaction code is FSI2.Where in you can go to output type tab & you will find the option.
As your query is relating to CO you can try transaction code GR11where you design the layout for report painter reports.This might help you.
Else if your requirement is such that you want each details through graphycal representation you can use report interface which will direct to graphycaly represented report.
Regards,
Abhijit -
Enquiry on standard SAP MM LIS Report
Hi,
I would like to know whether is there any standard SAP MM report that can be used to display all completed/closed LIV for vendors, based on date ranges?
I have tried to use MCE3 or MC$4 but vendors with no LIV made are also shown.
I only need to display those vendors with closed IR, say for 1 year.
Appreciate if any expert can advise, thanksHi Prabu,
My system said MIR5 does not exist. Is there any other program to view closed LIV for PO?
thanks
Maybe you are looking for
-
Since Latest IOS Update iPhone 4 Screen Suddering/Jittering
Hi, I recently updated my iPhone 4 with the new update and the update has left my phone with a screen that shudders/jitters on many apps. It started on the one app and has started spreading to other apps and now also to my home screen. I am wondering
-
Error 'Express document "update was terminated" from the author'.
Dear All, I have created a delivery doc(PGI) with ref to sales doc, it gave the del doc no. while creating billing do with ref to this del doc I am getting an error " update was terminated". when I cheched Vlo2n it says that the doc does not ex
-
How to get settings to work again?
I just finished unblocking my iPhone for the third time and now settings does not want to work! Please help.
-
Quicktime/iTunes Full Screen Color Profile Issues?
I'm running Yosemite now, but this has been an issue long before I upgraded from Mavericks as well. The default color calibration in OSX is overly bright and blown out on my monitor, so I have a custom calibration set up and in use on my Mac Mini. T
-
For the past two days, every time I try to purchase a song or video I get a window that says that credit card purchasing is temporarily unavailable and to try again later. The iTunes Store is unable to process purchases at this time. Is everyone gett