Copy the values input in input text 1 to input text 2 using value change listener

Hello ,
I have two input texts :
input text 1 & input text 2 .
I need to copy the values input in input text 1 to input text 2 .
How do I implement this using value change listener ?
I did the following steps :
1) I selected input text 1 and chose Value Change listener --> edit .
   Typed a new bean & class name .
   Which method name should I add ?
Any help please ?

Hi,
Give any name to the method and bind the two input text to manged bean using bindings attribute of InputText. just follow the below given code
Ex:
test.java class
    private RichInputText inputVal1;
    private RichInputText inputVal2;
    public Test() {
    public void ValChange(ValueChangeEvent valueChangeEvent) {
        // Add event code here...
        inputVal2.setValue(inputVal1.getValue().toString());
    public void setInputVal1(RichInputText inputVal1) {
        this.inputVal1 = inputVal1;
    public RichInputText getInputVal1() {
        return inputVal1;
    public void setInputVal2(RichInputText inputVal2) {
        this.inputVal2 = inputVal2;
    public RichInputText getInputVal2() {
        return inputVal2;
test.jspx page
<af:inputText label="Label 1" id="it1" valueChangeListener="#{backingBeanScope.TestBean.ValChange}"
                              binding="#{backingBeanScope.TestBean.inputVal1}" autoSubmit="true"/>
                <af:inputText label="Label 2" id="it2" binding="#{backingBeanScope.TestBean.inputVal2}"
                              partialTriggers="it1"/>
Thanks
nitesh

Similar Messages

  • How do I create a series of text frames using values from Excel list?

    First of all, this is the very first script I'm attempting to write from scratch. I'm completely green at scripting, and I've picked up a few snippets from Adobe's ID scripting guide, but nothing has really stuck yet relating to this particular objective.
    My supervisor keeps a master list of ad spaces, with the name of the account, how wide the space is, and how tall the space is, all in an Excel sheet. These spaces can number in the hundreds, and I am stuck manually drawing one rectangle for every space, which takes a very long time.
    I'd like to create/have help creating a script that will take these values and "automagically" draw these spaces in the form of text frames, with the width (in columns) and the height (in inches) defined by the values in the master list, as well as the name of each account appearing in the subsequent text frames.
    The script doesn't necessarily need to be able to pull the values straight from the Excel sheet; I can transfer the values to a support text file if needed, or directly into the script, changing it as I need it. A big thing (if it is not able to pull right from an Excel sheet) is that the number of spaces changes weekly, and so do the accounts, and the width and the height. Accordingly, it would be ideal if the values from the sheet could be changed easily, so as to create a new set of spaces as needed.
    Positioning for each space is not crucial, only height and width. If they all appear on top of each other on the same page, that will be a result for me. The main idea is to not have to draw them all manually, one by one.
    To me, this sounds like a tall order, but hopefully some experienced scripters out there can assist me, as I wish to become experienced as well.
    So, the TL;DR version:
    - Script needs to draw a series of text frames.
    - Text frames dimensions need to be defined by width and height values from Excel sheet.
    - Text frames must have account name as contents (from account names in Excel sheet).
    - Accounts, width and height change every week in the Excel sheet, so must be relatively easy to exchange all of the values.
    - The width values are on the Excel sheet as columns. It would be ideal if the script could convert those numbers into multiples of columns as needed.
    - (Optional) Script can pull values directly from Excel sheet.
    - (Optional) Script can define text frame fill color as gray. (If it works as I think it will, I could just select all the resulting text frames myself and set them all to gray at once... I'm not that lazy )
    Thanks in advance to whomever can assist in any possible way, even if it is just a push in the right direction. This script will save 1-2 hours of tedium every week.

    Sound like the perfect thing for InDesign Scripting.
    I would copy the Excel contents into a text file, to get a format that is easily read from InDesign, and there will automatically be a TAB for each "cell" just using copy/paste.
    Here is a piece of code, that you perhaps could go on with (adding variable to change pages and location on page, and other stuff).
    The readFileLineByLine function, can be easily re-used with any function using "callback". You simply supply the function to it, that you want to be executed for every line of text that is read:
    const COLUMN_WIDTH = 2; // Define the column width in inch
    var pageIndex;
    var textFramesExported; // not implemented.
    // Add a new dokument. Set myDoc to app.activeDocument to use
    // the current document instead of creating a new one.
    var myDoc = app.documents.add();
    // The doSomethingWithTextRow function is called upon for every line of text read.
    readFileLineByLine('c:\\test.txt', doSomethingWithTextRow);
    function doSomethingWithTextRow(row){
        // We expect the text line to be TAB separated (\t = TAB). We get that from just copying the contents of an
        // excel file into a text document.
        var cells = row.split('\t');
        var companyName = cells[0]; // The Company name in the first slot of the array
        var width = COLUMN_WIDTH * cells[1];
        var height = cells[2];
        // Create a new text frame for every row handled
        if (pageIndex==undefined) pageIndex = 0; // Count up when you have exported a number of texts, I leave this for you to do.
        var newTextFrame = myDoc.pages[pageIndex].textFrames.add();
        newTextFrame.contents = companyName;
        // The text frame is created in the top left corner.
        newTextFrame.geometricBounds = [0, 0, height + ' in', width + ' in']; // Top, Left, Bottom, Right
        // You might want to move the textframes to other positions, keeping track of how many you put out per page.
        newTextFrame.move( [10, 10] );
    function readFileLineByLine(path, callbackFn){
        var myFileIn = new File(path);
        if (File.fs == 'Windows'){
            // This was probably added to recognize UTF-8 (even without its start marker?)
            myFileIn.encoding = 'UTF-8';
        myFileIn.open('r');
        var myEncoding = myFileIn.encoding;
        try{
            if (!myFileIn.exists){
                throw('Missing file: ' + myFileIn.fsName)
            var ln = '';
            while(!myFileIn.eof){
                // Read the lines from the file, until an empty line is found [now as a remark].
                ln = myFileIn.readln()
                // if(ln !='' && ln!='\n'){
                   // Call the function supplied as argument
                   callbackFn(ln);
        }catch(e){
            alert(e);
            gCancel = true;
        finally{
            myFileIn.close();
    The file in C:\ in my example was saved as UTF-8 and looks like this (showing hidden characters):
    Message was edited by: Andreas Jansson

  • Copying the file in Director Lingo

    Hi!
    I am opening a file using the openFile command in director
    but what i need is to open the file as well as copy the same file
    to a local drive.Can it be done in director and can i get code
    snippet for the same.Is there any comand in director for cpying a
    file from one location to other.If i only provide a path of the
    file then i need to copy the file to desired location.
    -Thanks

    You could also use the downloadnetthing command to copy files
    to and fro.
    Though there's enough xtras as mentioned that have more file
    handling
    functionality than Lingo has.
    Manno
    ajeet.ghule wrote:
    > Hi!
    > I am opening a file using the openFile command in
    director but what i need is
    > to open the file as well as copy the same file to a
    local drive.Can it be done
    > in director and can i get code snippet for the same.Is
    there any comand in
    > director for cpying a file from one location to other.If
    i only provide a path
    > of the file then i need to copy the file to desired
    location.
    >
    > -Thanks
    >
    Manno Bult
    [email protected]

  • Copying the enterprise example

    Does anyone have the steps to copy the enterprise sample desktop. I would like to use the enterprise desktop as my template. I have copied the desktop directory and changed all of the references to the enterprise sample. I have defined JOHNTabContainer but I keep getting this message.
    [#|2008-02-22T20:38:31.163+0000|FINEST|SJS Portal Server|debug.com.sun.portal.providers.jsp|ThreadID=18; ClassName=com.sun.portal.providers.jsp.JspServletEnvironment; MethodName=getResource; |PSDT_CSPPJ0019 : File handle is null for channel JOHNTabContainer and template /menubar.jsp.|#]
    [#|2008-02-22T20:38:31.164+0000|INFO|SJS Portal Server|debug.com.sun.portal.providers.jsp|ThreadID=18; ClassName=com.sun.portal.providers.jsp.JspServletEnvironment; MethodName=getRealPath; |PSDT_CSPPJ0016 : Exception thrown while getting real path of uri path /menubar.jsp.
    java.net.MalformedURLException: JspServletEnvironment.getResource(): not found for channelName=JOHNTabContainer, path=/menubar.jsp

    Please check if this helps you -
    http://blogs.sun.com/jimfaut/entry/portal_7_creating_a_new
    Thanks,
    Vivek

  • Accessing the value of a text box input

    how do i access the value of a text box on a jsp page..
    eg:if the page name is Test.jsp and it has a text box named text.....

    You're mixing JSP and JavaScript. If you're staying within the same page, e.g. no get/post to another JSP, and you need to update values of a text field within a form, use pure JavaScript, such as:
    <form name="fred">
    <input type="text" name="USERID" size="15" onBlur="document.fred.PASS.value=document.fred.USERID.value;"><br>
    <input type="text" name="PASS" size="15"><br>
    </form>
    This will change the value of the PASS field to the same as the USERID field, which is what I think you were trying to do.
    Not to be rude, but in the interest of keeping the Java forum pure, I would look towards a JavaScipt forum if you wish to use pure JavaScript (http://freewarejava.com/cgi-bin/forumdisplay.cgi?action=topics&number=1&SUBMIT=Go)
    bRi

  • Can we hide the real value of input text box and show other value in ADF?

    Hi All,
    I have a table in which i have one the column as "Quantity" and text box as "quantity" :-
    <af:column sortProperty="quantity" filterable="true"
    sortable="true" headerText="Quantity" id="c3"
    width="60"
    rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
    filterFeatures="caseInsensitive">
    <div align="center">
    *<af:inputText value="#{row.bindings.quantity.inputValue}"*
    label="#{bindings.queryProductResponseType.hints.quantity.label}"
    required="#{bindings.queryProductResponseType.hints.quantity.mandatory}"
    columns="#{bindings.queryProductResponseType.hints.quantity.displayWidth}"
    maximumLength="#{bindings.queryProductResponseType.hints.quantity.precision}"
    shortDesc="#{bindings.queryProductResponseType.hints.quantity.tooltip}"
    id="it5" partialTriggers="it19"
    readOnly="#{row.activeYN == 'N'}">
    <f:validator binding="#{row.bindings.quantity.validator}"/>
    <af:validateRegExp pattern="^[1-9]+[0-9]*$"
    messageDetailNoMatch="Quantity must be in whole number format."/>
    </af:inputText>
    </div>
    </af:column>
    Now when the user will enter say 400 in input text box "quantity" , the value should be divided in the same row to other column text box say "conversion" which holds the value as 40 , so if the division doesn't give any remainder(means remainder =0 ) means real value(400/40) = 10 then it should set the value of input text box "quantity" as 10 but the user should be able to see 400 which he/she entered before, as we want to send the 10 as request but we have to show 400 to the user and if remainder goes greater than 1 than it should show an error.
    I have to implement this in value change listener of the text box as i need to calculate the real value each time for a row.
    How should i implement this ?
    Thanks .
    Thanks.

    Thanks timo,
    But can you give me full details how should i implement this as i am newbie to ADF. I have found the data control in Data controls tab in left hand side and right click on it -> edit definition -> but it does not give me the option to add attribute , it just give me the option to edit the existing attribute. Can you explain me how to add the transient attribute and how to implement it ? Any sample code snippet ?
    Thanks.
    Edited by: user13644804 on May 15, 2011 10:09 AM
    Edited by: user13644804 on May 15, 2011 10:09 AM

  • Problem while updating the forecast value in m.master by direct input menth

    Hi All
      Good Day
      I am updating the forecast value in material master by direct input method.
    my program is working fine when I am running it online.
    but when i am runnig in back ground I am getting one error which is mentioned below
                                                                                    Job ZM_OPTIMIZA_UPLOAD: Data does not match the job definition; job terminated    BD    078     E    
    Please anyone can help ne in above case.
    Thanks in advance.
    Cheers
    Vallabhaneni

    Hi Hakim
    How are you
    Thanks for your valuable suggestion.
    I am executing my program in background with bmv0 transaction with variant, in development I can run this job in background with out any logical errors but in QA I am getting errors.
    Can you please help me in the above case.
    In Bmv0 transaction first I defined the job and in  program rmdatind (execute) screen first I mentioned the Max. no of logical errors as 500 and Transactions per commit unit as 500 and I run the program in background in bmv0 transaction and I am getting the message background job terminated immediately
    Because of this again I changed the Max. no of logical errors 500 to 99999 and transaction per commit unit 500 to 999999 and then i scheduled my program in background.
    Alomost it ran for 27 hours and then it has given the message background job terminated.
    Job log entries are as follows.
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040840; material number SUJ82J8400; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040840: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040841; material number SUJ84G3001; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040841: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040842; material number SUJ84G3002; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040842: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040843; material number SUJ86G0100; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040843: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040844; material number SUJ86G0300; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040844: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040845; material number SUJ86G0900; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040845: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040846; material number SUJ86G9600; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040846: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040847; material number SUJ86G9601; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040847: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040848; material number SUJ86J0000; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040848: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:20:54  Transaction 0000040848 completed Mat. no.  No. of log. errors 0000040848  
    22.12.2008  11:21:30  ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED                              
    22.12.2008  11:21:30  Job cancelled      
    I know it has taken long time to process the job  because of I changed the transactions per commit unit (500 to 999999) it kills the system
    But I am supposed to provide some number < 999999 in transactions per commit unit
    actually I haven't tried like I said above < 999999 because i don't have any hopes.
    Please look at this problem and help me in this case.
    Thanks in advance.
    Vallabhaneni

  • Copy the caption and value text from a pdf form to a word doc.

    I designed a form to be used by nurses for entering data. They then want to copy the info into a text editor of a program (similar to word). When they copy paste it only copies the field and not the values entered. Any fixes?

    When the form I designed for some nurses is used, the information has to be copied and then pasted into a text editor program for a patient file. When I do a select all and copy, it only copies the fields, not the information entered by the nurses. Is there a way to allow all of the fields and text entered to be copied and then pasted in the editor program?

  • How to  adjust the text in input field

    Hi Expert,
    New in VC development. Can someone guide how to adjust the text in input field? Because of  long text length it  is not displaying fully in visual composer iView so user are not able to see the entire text in input fields

    HI Kundan,
    I assume that you have already tried different options perent in Label Postion for the field.
    If none of these options meet your requirement then you can try the following workaround:
    In the display properties, select label position as no label.
    In the form view add a new UI Control for Plain Text or HTML text and change its Label to "Material Number".
    Now place this new UI Control in before your actual Input field such that it appears as the field label.
    Hope this helps.
    Regards,
    Rk

  • Copy the Log of Batch input

    How we can copy the Log of Batch input that we have executed through T-Code SM35.

    Hi,
    You can take a dump of the table APQI from SE16.
    Thanks and Regards,
    Anit

  • How do I copy the value of a managed metadata field into a text column in the same list?

    I have a SharePoint designer workflow that I am trying to use to copy the value of a managed metadata field, into a text field. So basically my workflow is this...
    Stage 1: Set [MyColumnValue] to [%Current Item:MyColumn_0%]
    Go to End of Workflow
    This seems like a simple enough task, but each time an item is added or updated in my List, all I get for my new column [MyColumnValue] is just a link that says "Stage 1". Am I missing something here? Shouldn't this workflow be able to just copy
    the value from the managed metadata column to the text column?

    When you create a workflow on a list/library it automatically creates a new FIELD with the name of workflow and it's status. It sounds like you're viewing the Workflow status field, and not the field that the workflow is putting the values into. Make sense?
    So edit the view and add the new field in.

  • I want to make a textfield non editable with blinking cursor,and the text is input from a custom keypad

    I want to make a textfield non editable with blinking cursor,and the text is input from a custom keypad....
    Please Help me.
    I want to make a numpad of my own from which i can set the text but i want the user to tap in between the text..

    You seem to stop the while loop to run the following code, then the program ends. Are you running this using the "continuous run" button????
    You need one big while loop containing the acquisition, then you build up the history data in a shift register. Clicking "save" will save the data, but not stop the loop.
    Why did you place a time-control in the FOR loop??? This is just post-processing so it should just do it without any delays. I don't understand the logic in the FOR loop. You are appending arrays, but then you delete the first element at each iteraction constantly trimming data from the beginning of the appended array. Then you autoindex at the output tunnel heavily duplicating all data. Ths make s no sense!
    Can you explain how you want you data saved?
    Message Edited by altenbach on 12-16-2005 11:20 AM
    LabVIEW Champion . Do more with less code and in less time .

  • The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1

    The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1. If you select single file, then it is able to return file size correctly. However, if you select multiple files, then the file size of each of the selected file is always returned as 0 from javascript. This works correctly in Safari 4.0 but it does not work in Safari 5.1.
    How do I get the correct file size in Safari 5.1 ?

    If you want to post (or send me) a link to the lrcat file, I'd take a look at it for you, and give you a break-down what's consuming all the bytes. But it might be fun to learn how to do that yourself (e.g. using SQL). I use SQLiteSpy, but other people have their favorites.. (or you can use a command-line client if you prefer..). One way: just run "drop table "{table-name}" on each table then look at filesize (do this to a copy, not the real thing).
    Anyway, it's hard to imagine keywords and captions etc. taking much of the space, since even if you had 1000 10-character words of text metadata per photo average that still only adds up to 117MB, which isn't a substantial portion of that 8G you're seeing occupied.
    Anyway, if you've painted the heck out of most of them and not cleared dev history, that'll do it - that's where I'd put my money too...
    One thing to consider to keep file-size down:
    ===================================
    * After reaching a milestone in your editing, take a snapshot then clear edit history, or the top part of it anyway (e.g. leave the import step), using a preset like:
    Clear Edit History.lrtemplate
    s = {
        id = "E36E8CB3-B52B-41AC-8FA9-1989FAFD5223",
        internalName = "No Edit",
        title = "Clear Edit History",
        type = "Develop",
        value = {
            settings = {
                NoEdit = true,
            uuid = "34402820-B470-4D5B-9369-0502F2176B7F",
        version = 0,
    (that's my most frequently used preset, by far ;-})
    PS - I've written a plugin called DevHistoryEditor, which can auto-consolidate steps and reduce catalog size - it's a bit cumbersome to use a.t.m. but in case you're interested...
    Rob

  • Copy the value of Summary Column in Block1 to an item in Block2.

    I am using the copy value from, but is not working, I also tried using the when_validate_item trigger and tried to assign the value, but to no vain. I also tried the post_query trigger, even that didn't do the trick.
    Let me give you a synopsis of we were on Forms 4.5 and are moving to 9i. This was not a problem since we used the mirror item property. This particular form is in wizard format. There are 5 data blocks, 3 blocks based on the database and the other 2 are control button blocks. The wizard first page is based on Block1, page2 is based on Block2. On this page we are calculating the average value of a column and trying to copy it to a column in Block1 which is on final page6. Page 3 of the wizard is based on the Block3, again here we are calculating the average of a column and copy the column in Block1 on page 6, these are text items but they are not key enabled for the user to change the values. These fields are not getting displayed with the average values.
    Please any advice will be highy appreciated.
    Thanks in advance,
    Chetan

    Hi Nath,
    Your English is much better than my French
    The change event fires when the user is inputting data into the object that contains the script. As you have it in the change event of the object in tab 2, it does not fire at all when the user is inputting data into the object in tab 1.
    Also the change event needs xfa.event.newText and not .rawValue.
    I would recommend that you move the script to the calculate event of the object in tab 2. This way as soon as the user leaves the object in tab 1, the information will be undated in the object in tab 2.
    Good luck,
    Niall
    Assure Dynamics

  • Auto populate text fields with a trigger such as entering text into input fields in ADF

    Hello all,
    I am not able to auto populate text fields with a trigger such as entering text into input fields in ADF.
    I tried AdfFacesContext.getCurrentInstance().addPartialTarget(val); in the back end using setter method of input text field.
    its not working ..
    is there any way to achieve it
    Regards,
    Shakir

    Hi,
    Always mention your JDev version.
    The valueChangeListener would fire only when you set the autoSubmit property of the field to true. Can you elaborate your requirement? What do you mean by related data? Are you performing some sort of search?
    If you want to get the value you entered on the field, just set autoSubmit to true and get the new value from the valueChangeListener. If your requirement is something like as and when you type, do something, you need to check out this approach :https://blogs.oracle.com/groundside/entry/auto_reduce_search_sample
    -Arun

Maybe you are looking for