Copying from Sapscript to Smart form with d same windows

I hav created my sapsccript till now i want to copy my sapscript windows n text elements n other attributes of that sapscript to smart forms.So please help me to copy sapscript to smart form,Please help me out.
Thanks & regards
santhosh kumar.

check the link below it provides steps to convert sap scripts to smartforms
http://www.ficoexpertonline.com/downloads/Iyer_SmartForms.pdf
Check these threads.
Smartforms -> sapscript
Re: Convert SapScript to Smartforms ?
Regards,
Sooness

Similar Messages

Smart form with 2 different pages

Hi Experts
I have a requirement, I need to develop a smart form with 2 different pages, and each page has different data and presentation of the data also is different.
In the first page I need to display the contract data with the line items and amounts and in the second page I need to display the partner details with their contact details. From second page onwards it may go further based on the partners exists for that contract.
Plesae advice me best possible way to achive this.
Thanks
Praveen

Hi Praveen,
Create two Pages:
First Page:
In general Attributes section- Keep page2 as next page
Create Main window and under that
Keep the text elements for contract data of line item and amounts as required
Second Page:
In general Attributes section- Keep page2 as next page
create main window and under that
get all the partner details of line item into an internal table(using program lines node).
Now use 'Tables' node which behaves as loop for this internal table (so that it continues further if it contains date more than 1 page)
And display the values in smartform using Text node
Regards,
Swarna Munukoti.

SAPscript and Smart Forms - Going to be phased out?

Thus far, are SAPscript and/or Smart Forms going to eventually be retired? Is there an official document, or Note that says so? I've exhaustively searched through these forums, and the SMP for the PAM and Notes, but I can't find a reference anywhere that will tell me.
I did find where it says:
"Customers can continue to use existing SAP forms solutions such as Smart Forms and SAPscript.
Both solutions will continue to be supported in their current functional scope."
Just want to make sure with my clients.
Thanks!

Hello,
We recently rolled out an SAP's Strategy as far as forms development is concerned.
Here is the official statement:
"The SAP forms strategy is based on SAP Interactive Forms by Adobe (IFbA). This applies to both print and interactive forms. In this context, most Business Suite solutions have already been converted to the IFbA technology (more than 2300 forms), and new standard SAP forms will be created using IFbA instead of Smart Forms or SAPscript.
SAPscript and Smart Forms shall continue to be supported inline with SAP's maintenance strategy, thereby ensuring the ability to protect existing customer investment."
You can also find this on the Smart Forms page in SDN: Smart Forms Overview
Regards,
Nikhil

Merge the Attachment Files from DMS into smart forms

Hi Gurus,
I have a requirement of merging documents and printing it on a smart form.
I need to read the active files of SAP DMS. It could be DOC or PDF or Image.
I will have a smart form with some data to be printed related to the document(may be 2 pages).
Once after printing the data, I need to print the contents of the file in the smart form. (ie) 3rd, 4th and 5th pages.
then i need to convert the entire smartform into PDF and load it back to DMS.
Example :
if I have 3 different files
1. Word document, which has a Graphical representation of the component
2. PDF, which has a Graphical representation of the component
3. Image fileBMP or GIF or JPEG, which has a Graphical representation of the component.
I have used BAPI_DOCUMENT_GETDETAIL2 to read the active document, and the function SCMS_DOC_READ to get the contents of the file in Binary format
I couldnu2019t merge the contents of the documents
Please let me know if there is any solution with in SAP to do this. We are restricted to smartforms only.

hi Naveen,
Checkout the link..,
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/creating xml forms 6.0
it provides step-by-step guide to ur problem..
hope it helps..,
regards,
Vinoth

How to populate smart form with new values

Hi!
I am new to smart form . Can anybody help me in how to populate smart form with some new fileds. Actually i have to populate credit memo form with some customized values..

Hello,
Please elaborate your query more in order to be comprehendable.
Regards,
Shehryar

Cannot delete read mail. Keep getting the following message "926540.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

I am trying to free up room on my hard drive but keep getting the following message. “926540.emlx” couldn’t be copied to “Messages” because an item with the same name already exists. 926540.emix is the number given to the email I want to delete. This message appears (with a different .emix number) when I try to delete any mail. I have junk mail from 2014 to 2009 that I want to delete

Back up all data. Rebuild the mailbox. Try again to delete the message.

Messages could not be moved to the mailbox "Trash - "122730.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

Cannot move messages from mail to trash. Get the following message: messages could not be moved to the mailbox “Trash — “122730.emlx” couldn’t be copied to “Messages” because an item with the same name already exists.

I just started having the same problem but have found no solution.

Is there a way of shifting purchases from one account to another with the same billing information, so that I don't lose purchases made by my iPhone when I sync?

The AOL address I was using for my iTunes account has been deleted due to me not signing in for awhile and I'm afraid that I will lose all of my purchases made from my iphone when I sync it into iTunes for a much needed update and so that I can (hopefully) transfer its data to my new iPhone 4...
The only time I have synced my current iPhone was when I activated it but since then I have not been able to sync with my computer and now have a new one.
Sorry about the garbled way this is written but I desperately need help:
1, Is there a way of shifting purchases from one account to another with the same billing information?
Or
2, is there a way of recovering my old account and changing the details?
Any other help is greatly appreciated
Thom

You don't need to access your e-mail account, just get into your Apple account and change the e-mail address. If you can't access your Apple account, then you have a bigger issue to contend with.

HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

Still using the @mac.com mail address and up to date on everything, but have not gone to Maverick. All of a sudden Mail wouldn't let me delete. Said that title of email was already in trash. And sure enough it was. Clicking on the help button on the message gets Nothing.
The selected topic is currently unavailable.
The topic you were trying to view could not be found.
"couldn’t be copied to “Messages” because an item with the same name already exists."
Any ideas. My mail is not tied to gmail etc.. just all by it's lonesome.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Web Matrix FTP Remote Connection Error - "Connection Error - Failure to get file list from server. An entry with the same key already exists."

Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
"Connection Error - Failure to get file list from server. An entry with the same key already exists."
I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
Issue Persists....
Thanks in advance,
Justin

Turns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages.

When deleting messages I get this message:"74608.emlx" couldn't be copied to "Messages" because an item with the same name already exists. How can I fix this problem?

When trying to delete messages in mail, I've been getting this message:“74608.emlx” couldn’t be copied to “Messages” because an item with the same name already exists." The numbers at the beginning are always different but the ".emlx" and the rest of the statement is always the same. How can I fix this problem?
Thanks
Candy777

HT2500 Error when deleting email: Apple Support Communities

"91590.emlx" couldn't be copied to "Messages" because an item with the same name already exists. How do I fix this?

The delete button in Mail gives me this message: “91590.emlx” couldn’t be copied to “Messages” because an item with the same name already exists. The only thin that has changed is an OS update last evening. (Mountain Lion)

Thanks...it was spooky seeing the mail in my box suddenly disappear and blank after going to Mailbox and Rebuild. But "poof" it was up again and was able to delete without the messages telling me it had a duplicate in trash (which it did). Solved the problem.

How to move iTunes from one user to another on the same Windows 7 computer

How to move iTunes from one user to another on the same Windows 7 computer? Thanks, Bob

Move the iTunes library to a shared area and then into the desired location. If this isn’t the default one, launch iTunes with the Shift key held down and choose that library.
(122379)

Smart form with Migo

Hi ...
I want to attach a smart form out put type with migo .. when we print that out form should displayed ... kindly help that for which program i make a Z copy and where should i attach that Zprogram and Smartform in SPRO .....
Regards
Ammad

Hi,
The Developed Zsmartform is to be placed in the Smartform name and the Driver program need to be copied to Z with all includes.
The following link shows how to copy a std program to ZProgram.
[Re: Printing Purchase Order from ME9F using custom program and smartform]
Regards,
Vijaya Lakshmi.T

How to create barcode in Smart Forms with MS Word as Editor?

Hi,
I created a character format for a barcode in a smart style.
The problem is that I do not know how to assign it to the text in Smart Form because the Editor is MS Word and not the normal Editor.
Any suggestion or idea.
Thanks & best regards
Viktoria

Hi and thanks for the fast reply,
I have created a smartstyle and also a characterformat for the barcode. This is not the problem.
I call the layout via HRFORMS. The Form Builder for Smart Forms is called and the Editor for the text nodes is preset and is the MS Word editor. This cannot be changed. I tried different things also in the settings. The normal text editor cannot be called.
I choose and enter the field that I want to convert into the barcode &wa_barcode&. I do not work with standard texts (SO10). The text field is a normal text node in Smart Forms. The character format that applies converts the number in the variable field into the barcode.
In the MS word editor I have only formats that are in the office environment (arial, ...) I do not see the formats that I created in smartstyle also when I assign it in the output options of the text node.
So maybe I have to work like this for now. Swich between HRFORMS and SMARTFORMS when working with barcodes. In the Smart Forms transaction it is the normal editor where I can see the paragraph/ character formats from smartstyle.
Thanks and best regards
Viktoria

Copying from Sapscript to Smart form with d same windows

Similar Messages

Maybe you are looking for