Copying movie clip with flv

Hi, I am trying to copy a movie clip with an flv in it from
one project to another. Everything works fine except the flv just
keeps trying to load and never plays. I am not sure what to do. Any
suggestions?

It sounds like you are using the FLVPlayback component to
display the FLV, in which case, the FLV is a separate file and
likely needs to be in the folder next to the new project. Go back
to the old project and copy the FLV from its location there to the
new projects folder.

Similar Messages

  • Is this a bug?: copied movie clip has wrong frame rate and ruins the main movie's sync

    Hello,
    I am trying to copy a movieclip with a frame rate of 30 frames per second to a movie that has a frame rate of 30 frames per second. Both movies are actionscript 3 movies. When I do this, my copied movie clip's frame rate reverts to 12 frames per second and all my audio synched animation is trashed. Then when I change it back manually to 30 frames per second it makes my main movie's stage animation go crazy at full possible speed and the audio is all out of sync. I have not set export for sharing or action script on this movie clip. I've tried other movie clips that are 30 frames per second and it is all crazy!
    Is this a bug? What can I do? I've got 100s of movie clips I need to make. I can't keep remaking them just because flash has a screw loose. I'll go crazy!
    -theGibler

    Oh sorry I goofed! My main time line is 12 fps! I can't belive I didn't see this before.

  • What type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI.  will this load onto ipad?

    what type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI.  will this load onto ipad?

    Per http://www.apple.com/ipad/specs/
    AirPlay Mirroring to Apple TV (2nd and 3rd generation) at 720p
    AirPlay video streaming to Apple TV (3rd generation) at up to 1080p and Apple TV (2nd generation) at up to 720p
    Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately)
    Video out support at 576i and 480i with Apple Composite AV Cable (cable sold separately)
    Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • Noob help: Triggering Movie Clips with Buttons

    Hi guys,
    I'm taking an intro Flash and Action Script class and for my final I need to create a portfolio project that contains 5 unique buttons that trigger 5 unique movie clips. I'm having a hard time with this. I've been able to trigger the 1st movie clip with the first button (although I can't stop it) but I can't trigger any ohter movies with any other buttons.
    Here's my code:
    stop();
    chuck1_btn.addEventListener(MouseEvent.CLICK, playMovie);
    function playMovie(event:MouseEvent):void
        spaceship_mc.play();
    chuck2_btn.addEventListener(MouseEvent.CLICK,playSaucers);
    function playSaucers(event:MouseEvent):void
        saucers_mc.play();
    Nothing happens when I click on chuck2_btn when I test the movie. I think I need to create a variable or class but I'm not sure. I'm a super noob with this stuff. Any thoughts? Thanks!
    Rick

    You should learn how to use the Help documentation to find answers like how to use the visible property.  For the code you showed earlier, here's what you can try in frame 1 to replace it.
    stop();
    spaceship_mc.visible = false;
    saucers_mc.visible = false;
    slideshow_mc.visible = false;
    chuck1_btn.addEventListener(MouseEvent.CLICK, playMovie);
    function playMovie(event:MouseEvent):void
         spaceship_mc.visible = true;
         saucers_mc.visible = false;
         slideshow_mc.visible = false;
        spaceship_mc.play();
    chuck2_btn.addEventListener(MouseEvent.CLICK,playSaucers);
    function playSaucers(event:MouseEvent):void
         spaceship_mc.visible = false;
         saucers_mc.visible = true;
         slideshow_mc.visible = false;
        saucers_mc.play();
    etc...
    It could be refined, like having a function that hides everything and using that every time before making the one you need to show visible.  You might find it necessary to include telling the movies to gotoAndStop(1) as well.
    That's about as generous as I'm going to get.  It's important that you learn things, and handing you a solution isn't going to help do that.

  • Check for movie clips with AS?

    Is it possible to check if a frame contain a movie clip with
    AS, and then if movie clip is found run a function? Like a global
    "event handler " for movie clips.

    I want a function that automaticly can detect and fade in any
    movie clip found in any keyframe in the main timeline. So i don't
    have to make
    In the first keyframe in the main timeline
    on (ohh here i found a movie clip)
    //let's run a nice fade function on that movie clip
    mx.transitions.TransitionManager.start
    (eval(TheClip),
    {type:mx.transitions.Fade,
    direction:0,
    duration:1,
    easing:mx.transitions.easing.None.easeNone,
    param1:empty,
    param2:empty
    Something like that

  • Moving movie clips with ActionScript

    I am trying to move four movie clips with actionscript in a
    circler motion with two buttons, one to rotate the mc’s to
    the left and one button to rotate the mc’s to the right. Here
    is a link to what I am trying to do;
    http://www.us.playstation.com/Lair/
    and it is undrer game features.

    Yes, that's what the code I gave you is intended to do....
    you replace that code with whatever action you need to take to turn
    your movie around.
    I have no idea what your movieclip is doing, but I'm guessing
    by your response that if it was an arrow pointing left to right
    (just an example), you want it to be pointing right to left when
    the left arrow is pressed. If you want an immediate turn around,
    then the simplest way to do that is to have another frame
    containing the movieclip that it moves to where it faces the other
    direction--and to have it appear turned around, from the toolbar
    you select Modify -> Transform -> Flip Horizontal.
    So the movieclip would live inside another movieclip that has
    two frames with stop()'s for each frame. In the first frame you
    would have the subclip facing left to right, and in the second you
    would have it facing right to left. If we call that 2-framed
    movieclip "walker", the code I provided before would
    become...

  • Exporting a move clip with alpha channel

    Hi there,
    I’m trying to export a move clips with alpha channel.
    I’m trying to export an animation with Premiere CS5. I made an animation of a rotating object in Maya and exported it with alpha channel as tiff images. Then they are edited with Photoshop to give them a drop shadow.
    My problem is this. Can I export this tiff animation with the alpha channel?
    My plane is to use move clips over backgrounds in a game – depending on the result there are different animations playing on top of several different backgrounds. There for the objects has to have a transparent/alpha channel over the backgrounds.
    Again the reason for this is the complexity of the game and to make the game looking as real as possible. I’m hoping for some help here to make my plan possible
    …thanks

    Thanks alot for the help.
    But now I’m wondering how to get the file size down?
    The 32bit and alpha channel just increase the file size from about 1MB to 9,3MB, which is pretty much??
    …any ides mate?

  • Play multiple movie clips - with sound

    Hello Forum members,
    I am a total new comer in terms of flash and action script,
    self-educated and Adobe forum and internet educated. I can now
    click a button and stop and start a movie clip, use attachMovie,
    and even mute sound in a movie clip (not video). I am currently
    using Flash 8, and waiting for CS3 (downloaded a trial, and like it
    better than Flash 8).
    Enough history - now to my question - I have an application
    that had 3 scenes. I read in some Adobe article
    "Flash Best Practices" that it was not a good idea to use
    scenes in an application. I converted my Scene 2 and Scene 3 into
    movie clips.
    I figured I could either put each movie clip on a separate
    layer in my timeline (mc_scene2, mc_scene3)
    and play them, one after the other (did not quite work, more
    later). Or...
    copy the timelines from the scenes, and add those frames to
    my Scene 1, making a application with both scenes staggered one
    after the other in the main timeline. Or...
    Keep Scene 1 and at the end of scene 1,
    attacheMovie("mc_scene2", etc) and when scene 2 was done play and
    or attach the final movie clip (mc_scene3).
    I could not figure out how to tell when mc_scene2 was done
    using the attacheMovie method, so I could then attach mc_scene3,
    etc.
    How would I be able to tell when one attached or loaded movie
    clip is finished, and then start the next one?
    Or what is the suggested way to use actionscript to load a
    movie, play it, and when the clip is done, load and play the next,
    etc.
    Thanks for a good forum,
    eholz1

    Hello Again - I guess there is much that I do not understand.
    I followed the tip above - or so I thought.
    I have "buttons" on my movie clips that play the clip when
    clicked.
    I have placed stop actions in frame 1 of each movie clip.
    I tried placing mc_scene2 and mc_scene3 on their own layer
    in the timeline,
    and put the code above in my actions layer (Scene 1).
    it seems that nothing really works - the _visible property
    seems not to work,
    etc - I must be doing something wrong. What layer should the
    two mc's be
    placed?
    Thanks for the info
    Eholz1

  • Editing quick time movie clips with sound

    We are editing together some quick time movie clips but we can't get the sound to come up.
    Is there something we are doing wrong? Can you split the voice from the visual when you bring these clips into Final Cut?

    A QuickTime movie can be made from any number of codecs. Which one are you working with?
    If it's an MPEG video, chances are it will need to be demuxed. You can use MPEG Streamclip for this and other conversions.
    See this post for links to a tutorial: http://discussions.apple.com/message.jspa?messageID=10609676#10609676
    -DH

  • Changing depths of movie clips with button clicks

    Hello all,
    I've got a file on working on that has 4 different movie clips on one layer that, when clicked, will zoom in (made with tweens in the timeline).
    The issue I'm having, is that when I click one of them, they are arranged in a way that won't work for what I need. I click one, and it works, but it is hidden by the movie clip that is on top of it in the heirarchy. Click another, zooms in, but is partially hidden by another one.
    My question is: Is there anyway in AS2 to code these so that when one is clicked, it will the top spot in the heriarchy? So that I can code them all like this so that whenever one is clicked, it goes to the top so it is not hidden?
    Thanks

    Correct me if I'm wrong, but isn't that just used to swap 2 movie clips?
    Or is there a number I can input instead of the movie clip name that will change all of them?

  • Movie Clips with one Frame

    If I have SWF's that I am using for UI elements in a game, and in these SWF's there are layers with Movie Clips and these clips have only one frame in them - do I need to explicitly put a stop() in there for optimal performance?
    I'm curious if these movie clips sit there and loop with only one frame and in the end hurt the game's overal FPS
    Any insight would be appreciated

    please don't cross-post.

  • How to play a movie clip with a tween animation

    I created a movie clip symbol with a tween animation and created an instance of it on the main stage. The animation is in the movie clip timeline, not on the main timeline. I cannot get the mc to play using mc.play() or mc.gotoAndPlay.  What am I missing??

    Hi Ned, thanks for the response;
    1.Yes I named the instance.
    2.I  don't beleive so. I started from the library creating a new symbol, added the graphics, added the key frames, then created the tween. Then I dragged the symbol onto the main stage and named the instance. So I don't think there is a movie clip inside an mc.
    Here is the main timline:
    Here is the mc timeline:
    Here is what I'm trying to do:
    stop();
    blk1._visible = false;
    blk2._visible = false;
    blk3._visible = false;
    ppk1._visible = false;
    ppk2._visible = false;
    ppk3._visible = false;
    storeCartons = new Array();
    storeCartons = [blk1, blk2, blk3, ppk1, ppk2, ppk3];
    startButton.onRelease = function() {
        myNumber = Math.floor(Math.random()*storeCartons.length);
        trace("myNumber "+myNumber);
        activeCarton = storeCartons[myNumber];
        activeCarton._visible = true;
              activeCarton.play();

  • Trying to remove movie clip with collision?

    I am creating empty movie clips and populating them with
    movie clips that have "drag and drop" functionality. I can create
    the empty movie clip and populate it with an external .swf. I've
    even got the drag-n-drop handled. But, I'd like to have them delete
    or disappear when they are dropped onto a trash can movie clip. I
    just can't seem to figure out the code for this. I would greatly
    appreciate any help you could give me.
    Thanks.

    you need to perform a hitTest to determine if the item is
    within the bounds of your trashcan, you can also use _droptarget,
    but I prefer hitTest with a shapeflag parameter. depending on your
    code, when you call stopdrag onRelease, run your test there.
    the_mc.onRelease = function() {
    stopdrag();
    if(_level0.trashcan.hitTest(_xmouse, _ymouse, true)) {
    this.removeMovieClip();
    }

  • Menu made in movie clip - with sub-section we can click on to go to another frame

    I would like some help about that:
    I want to do a menu made all in movie clip (NO button). In
    this menu, when we click on one of the part (sub-section) of the
    button (which is a mc), we must go to another frame in the main
    scene.
    It is working for the roll-over and mousedown for my button
    (with the _up, _over and _down labels). But it's not working then
    to put, i don't know, another movie clip inside with alpha 0 to
    make another onRelease and then gotoAndStop(20); ...
    Here is the code I have in the main scene (first frame):
    stop();
    mon_clip_mc.onRelease = function() {
    //this._root.gotoAndStop(20);
    And here is the code I have in the first frame of the movie
    clip of the button:
    stop();
    I'd really appreciate some help! Thanx

    lalapinerouge,
    as far as I can see with your method for buttons, is that it
    only reads 1 button inside mon_clip_mc..
    I cant figure out why, i've tested it over, made new fla's
    with your method, and i still cant get it to work, nor do I
    understand why..
    I need to study abit more.
    Maybe someone in the Forum will have a look at this topic,
    and know what's going on with your method.
    In the mean time, heres a submenu I made for a site a while
    ago. This doesnt use timeline actionscript, ( because i was a
    newbie then ) =)
    if you have a look through the whole FLA, ( it's quite abit)
    you can get an Idea of how i do my movie clip buttons, till this
    day, i still use the same method, only i use mainly timeline
    actionscript..
    the main point to notice is that EVERY button ( even submenu
    ) is it's own movieclip...no button in there holds multiple sub
    buttons inside... This gives you complete control of each button,
    and endless possibilities for animation, tweens, and anything extra
    you would want to add to a button.
    Sorry I couldnt help you figure out your problem fully. Im
    still going to mess around with it abit more to see if i can figure
    it out..
    Hope you can addopt some useful info from this FLA.
    HERE

  • Trying to access a specific movie clip with a string

    Ok, what I am trying to do is create as many movie clips as I
    need and then access those movie clips using string values. These
    string values are stored in an array and coincide with a given
    movie clips instance name. Check out the following code:
    I think my problem is that Flash is trying to call movie clip
    methods on a string instance. I'm not sure how to type cast in
    Flash, or even if it is possible, but how would I access the
    strings as movie clips?

    DuhChamp,
    > I think my problem is that Flash is trying to call movie
    > clip methods on a string instance.
    Bingo.
    > I'm not sure how to type cast in Flash, or even if it is
    > possible, but how would I access the strings as movie
    > clips?
    Use eval() or the array access operator, []. Details here
    http://www.quip.net/blog/2006/flash/actionscript-20/reference-objects-dynamically
    David
    stiller (at) quip (dot) net
    Dev essays:
    http://www.quip.net/blog/
    "Luck is the residue of good design."

Maybe you are looking for

  • Lost mail, forwarded doc with attachment.  No record and not received

    Using a message and attachment from an email in my files, created new message with updated info to send to CEO. Hit 'send' and heard normal rush sound. Later checked my sent file and no record. Called CEO exec asst not received. Tried again with a sh

  • Span columns problem with Table of Contents order

    Hello, I'm having a strange issue with headings that span columns and Table of contents order. My document has a heading paragraph in a coloured box, which is then inserted in-line into a 2-column text box. The paragraph style for the box (set to in-

  • 5530XM Problem 2 - S Type Jaguar Compatibility

    Has anyone had success connecting to an S Type or have any tips.  My own experience is that the first time I tried it paired and automatically uploaded the phone book! Since the initial pairing with full phone book access, more than 200 numbers, it 

  • Outlook import/data merge, possible??

    I want to take a calender from Outlook and merge it with or into a formatted table within an inDesign document. Is this possible? Is there a plugin for doing this? I can also export out of Outlook as a CSV file I'm just trying to minimize the amount

  • How to create spatial query (sdo_relate) on 2 views

    Hi, I want to create a spatial query in the form of: select /*+ORDERED*/ column1,column2 from view1,view2 where sdo_relate(view2.geometry,view1.geometry,'mask= ... ')Both views are very fast and return a smal number of rows out of a large dataset. I