Correct and re-send the error messages in PI

Hi everyone,
Today when iam monitoring my PI i found error like some objects missing in the que, I toublshooted it by using inbount xml payload and found the error and cunsulted the user he asked me to correct and re-send the error messages. as iam really new to PI monitoring i really dont know how to correct and re-send the error messages in PI, can any one please help me with it.
Thanks in advance

When you send the messages from RWB-->Component Monitoring ->Integration Engine>test message, runtime parameters like Sender System, Receiver system, Adapter specific message attributes won't carry any values. If you are using any of these paramters in the mapping step,, the mapping will fail.
I think in your case, RFC look up would have been configured based on Sender Business system/Service. but when you send message from RWB, the value for this field is empty. So that is why it is failing  as the message cannot find the business system and communication channel.
If you use the sender file name, server name or any other parameters in the message mapping, then message will fail in the message mapping step. That is the major set back in RWB-->Test message.
Reasons:
1)We post messages directly into pipeline step message mapping.
2)The previous pipeline steps are ignored when post messages from RWB such as Receiver determination, routing etc
3)Receiver determination step is responsible to send Sender/Receiver values into the mapping step.
Hope i have clarified your questions

Similar Messages

  • I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly."

    I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly."  When I then tried to run iTunes (assuming that, since the new install failed, my older version was still OK) I got the message "iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 1114".  I tried then uninstalling iTunes and reinstalling it fresh, but encountered the same problems. Help!

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I'm trying to install iTunes on my pc and i get the error message "Service Apple Mobile Device Failed to Start.  Verify you have sufficient privileges to start system services

    I'm trying to install iTunes on my pc and I get the error message "Service Apple Mobile Device Failed to Start.  Verify you have sufficient privileges to start system services.
    What do I need to do to get iTunes to install?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • In Adobe Creative Cloud, I go to Apps and I get the error message undefined and I cannot download anything, I am using windows 7 64 bit.

    I am using Adobe Creative Cloud, I go into Apps and I get the error message undefined.  I cannot download anything.  I try to refresh application, nothing.  I can even see what I downloaded previously.  I am using windows 7, 64 bit. 
    This worked fine for me for until this morning. 

    I am on an hp experiencing a similar issue e.g., Creative cloud download error 'undefined'. On an hp. screengrab attached.

  • I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

    I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • HT204406 hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

    hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

    That's definitely enough to start.
    It sure seems like it should work...and then I saw that you're using a router. It could very well be that the router is the weak link here.
    Instead connecting to your network router, try using a direct USB connection from your MBP. If that doesn't work, you read this post, which may be relevant to your problem:
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Scanning-from-Mac-10-7-fa ils-after-all-recommendations-Not-ready/td-p/1287003
    It seems you're up to date with software. Post with your results.

  • Installed itunes update 10.5.0.142 and now get the error message "Disc Burner or Software Not Found" when trying to burn playlist to disc.

    Installed itunes update 10.5.0.142 and now get the error message "Disc Burner or Software Not Found" when trying to burn playlist to disc.  Windows 7

    Hello queenabs,
    It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting the error, "disc burner or software not found."  I found a couple of resources that I think might help with an error like this.
    I recommend starting with the steps in this article:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
    http://support.apple.com/kb/TS2308
    If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have CS4 installed on two computers however none of the applications will now open on one machine and I get the error message 150:30

    I have CS4 installed on two computers however none of the applications will now open on one machine and I get the error message 150:30

    Your best bet is probably to start over by cleaning off the old software with the Adobe Cleaner tool:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Then reinstall from your original media, or download it here:
    http://www.adobe.com/downloads/other-downloads.edu.html

  • I have just tried to open iTunes and I got the error message 1712

    I have just tried to open iTunes and I got the error message 1712. this has never happened before  - any suggestions

    Relief- thank the lord for YOU

  • Library Lost - Please HeIp I tried updating my old ipod & now all 10,000 songs in my library have an ! next to them and I get the error message "song " " could not be used because the original file could not be found" on every song I try to play

    Please help - this morning I tried updating one of my old ipods for my wife (this ipod hasn't been updated in 2-3 years).  I plugged it into my pc, it was recognized and the software updated.  I created a new playlist and tied to sync the ipod.  This ipod had never been used on this pc/itunes since the pc is only 2 years old.  When I tried to sync the ipod it stated that it would have to erase all the old songs on the ipod prior to syncing.  I clicked ok and it proceeded to wipe out the old ipod and sync the new playlist (~1000 songs).  When the sync was complete there were only 6 songs from the new playlist (all purchased this morning from itunes) on the ipod and to my horror all ~10,000 song on my pc in itunes now have a ! next to them.  Only my recent purchases from itunes do not.  When I click on a song with the ! I get the error message "the song " " could not be used because the original file could not be found."  How do I correct this issue - I am scared to hook my ipads or other ipods to my pc for fear of losing everything?!?!?  I spent 100s of hours burning the 10,000 songs from my cd collection and do not want to have to do it again. 
    Any help is greatly appreciated.

    This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • I have an Airport Extreme as my wifi hub and an Airport Express to beam music. All of a sudden the Express stopped working and I get the error message "this version of Airport Utility does not support this base station".  All my software is up to date and

    I have a WiFi system in the house that uses the Airport Extreme for a hub and an older Express for sending music from my Mac to my sound system. Everything worked great till yesterday. When I go to Networks I see the Extreme and I see the Express but the Express is no longer connected and I get an error message "this version of AirPort Utility doesn't support this base station".  Any ideas?

    This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
    To check and see if  that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
    Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
    You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

  • I keep getting the message an unknown error has occured 0x80090318. I don't know how to fix it. I even deleted itunes off my computer and reinstalled and still get the error message

    I keep getting the message an unknown error has occured 0x80090318. I don't know how to fix it. I even deleted itunes off my computer and reinstalled and still get the error message

    This helped me.
    Go to Start -- Accessories -- Command Prompt, make right click and choose run as administrator
    Type this command : netsh winsock reset
    then restart your computer, everything should be ok after this. Good Luck.

  • I've made a film, and I'm at the point where I export it to post it, and I get the error message that "2 clips are missing"?

    So my film is all done, very excited to share it. It's a short thing at about 4:20 minutes long with music with video from several different cameras, 2 types of gopros, and my buddy's nikon DSLR. It plays back fine in final cut but gives me the error message when i try to export.
    How do i 'find the clips that are missing' or figure which ones are the ones that are 'missing' ? And the how do i 'find' them ?

    Do you see any of your clips in the Browser have have been replace by a red icon? Those are the missing clips.
    You can also go to File -> Relink Files. It'll bring up a window showing the missing files when the "Missing" radio button is selected. There's a button to help you locate the files. Once you have located the missing files, click the "Relink Files" at the bottom of the window.
    I had to do this for 339 missing files...it's a long story...last weekend. It worked perfectly.

  • HT1923 I can´t reinstall itunes. I updated and after downloading the latest version and installing it the error message: "apple aplication support was not found. it is required to run itunes. uninstall and install again. Error 2

    I bought an iphone 4s. After plugging it via usb to my computer itunes demanded to update version to 10.3 or higher. I uninstalled itunes, downloaded latest version (11.0.2) and during installation process on "activating services" it shows error message: "installation failed, verify administrator priviliges" which i have because i sign in as my pc administrator. I click on ignore and it tells me itunes has been succesfully instaled but when i try to run it it shows the error message: "apple application support was not found. It is required to run itunes. Uninstall and install itunes again. (which i have done several times) error 2 (windows error 2)." Someone please help me with this problem. Thanks.

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • HT1199 iTunes quits on opening and gives me the error message -45054?  Does anyone know what this error message is all about?

    I use iCloud for my music and recently deleted some duplicates from my desktop iMac (about a year old.)  Then tried to launch iTunes from the laptop about a 2008 macbook and get the error message -45054 and it won't open.
    Any ideas?  Would upgrading to Maverick help or make matters worse?

    Hi, kathysneedshelp. 
    Thank you for visiting Apple Support Communities.
    Try repairing permissions in by selecting the Disk Utility in your Utilities Folder of Applications.
    Using Disk Utility to verify or repair disks
    http://support.apple.com/kb/HT1782
    If the issue persists, try reinstalling iTunes by downloading it directly from our website. 
    http://www.apple.com/itunes/
    Regards,
    Jason H.

Maybe you are looking for

  • Message app wont open up

    i have some problems opening up the Message app (apples own). It starts and closes immidiatley. the same goes for some of the other built in apps. like fonts wont open, i had som e problems with mail before. i have an imac mid 2010 and the latest ver

  • Movement Type 351 against scheduling agreement for future dates

    Dear Gurus, For stock transfer orders(Inter Plant Transfers), if the schedules in receiving plants are available only in future(say after 15 days), the sending plant is able to make 351 against such scheduling agreements today itself. Is there any wa

  • Calculated column of a request from Column Selector View.

    hi, A user wants to select the calculated column of a request from Column Selector View. But he is able to select only those columns which are available in Selection Pane. How can he fulfill this request

  • Datagurd configuring in high protection mode

    Hi gurus, I am forllowing, the following method to configure dataguard in oracle 11g r2 on oel 5.5 startup; archive log list;Database is in archive log. select name from v$datafile;all datafiles, redolog files, controlfile are in /u01/app/oracle/sale

  • Is it possible to download an audiobook and also be able to read it on my iPad?

    I want to be able to read at the airport and listen to the book in the car but I don't want to buy and audiobook and the text copy.  Thanks!