Correct Data is not shown while opening Input Schedule

Hi
I am facing this issue almost in every template i create
After saving data in a particular template in an input schedule, i reopen the template from the dynamic templates library(etools -> open dynamic template)
But the data saved previously does not appear, instead it shows the values saved when the template was originally saved.
How to get the data newly saved data on opening the template automatically ?
List of options i have tried>
Have refresh on workbook open checked (etools - workbook options) - does not work
Have expand on workbook open checked - (works, but takes too much time to load the workbook, need not expand as the row & col expansions are quite static and only data refresh is required)
Have tried "MNU_EANALYZE_REFRESH" macro on workbook - does not seem to work fine (although when i click on the refresh buttton on the opened workbook/sheet , new data is being fetched correctly.
Have tried "MNU_ESUBMIT_REFRESH" (but this is not the right macro) as it gives a pop up on workbook open.
Any possible solution to the same will be greatly helpful
Has this been solved in any of the SAP 's Support pack versions... Im on SP03.
-Sridhar

Hi Sridhar,
You are absolutely right. Refresh on workbook open does not work as expected. The only workaround is to select expand on workbook open.
You can try another thing. you can right a macro which will run the refresh menu command when the excel is opened. and this macro will be available only to this workbook.
Hope this helps.
// Recent Addtion
You can use the command
Private Sub Workbook_Open()
Call MyMacro   
End Sub
u201CMyMacrou201D is the name of YOUR macro. Call your macro which will refresh the workbook.
Hope this will help.
Edited by: nilanjan chatterjee on Dec 17, 2009 7:53 AM

Similar Messages

  • All master data values not shown in query selections

    Hi
    I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
    I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
    As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
    Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
    Then I deleted the contents of the InfoCube. It still shows the original 25 values.
    The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
    The problem is the same in LISTCUBE
    I hope some of you can help we with this.
    Thanks
    /Karsten

    Hi Hari
    1) Reactivated the master data, said it was already active.
    2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
    I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
    I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
    Thanks for all the input guys.
    /Karsten

  • Data Associtions not enabling  while i am  trying to do data mapping with data Associtions in BPM studio what is the reson?

    Data Associtions not enabling  while i am  trying to do data mapping with data Associtions in BPM studio what is the reson?

    Shouldn't @StartDate be an input parameter to the stored procedure? @RunDate also?
    Example for sp with parameters:
    http://www.sqlusa.com/bestpractices2008/stored-procedure-parameters/
    The last error will go away upon a successful sp compile.
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Design & Programming
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • Documents edited with added text and sketch not shown while emailing in iPad 2.

    Documents edited with added text and sketch not shown while emailing in iPad 2.

    Hi Rakmana,
    This is most likely an issue with Apple's iOS Mail program's.
    I think you are opening your modified PDF in Apple built-in PDF Preview. Apple's code does not properly draw the comments, but if you look at the PDF in virtually any other PDF application that isn't just using Apple''s code, or on any desktop computer, you will see the comments you've added.
    Thanks
    -Satyadev

  • Date is not shown in messages list

    For many emails that I am receiving from different accounts, date is not shown in messages list, only time.
    It looks like these messages were received today, in fact they are old.
    Encountered this problem on 2 different PCs, 3 different mail accounts (gmail and own server).
    What could be the reason and how to fix it?

    The messages shown without date are not today's, they can be few days, months or even a year old...

  • The GL date is not in an open period: APP-PO-14230

    Hi,
    I am using R12.1.1 version.
    I am getting this error "The GL date is not in an open period: APP-PO-14230" when i open the "Inventory > Transactions > Receiving > Receipts" screen for the Intransit shipment.
    The Accounting calendar period (DEC -2011) is opened in both source & destination organisation.
    When i try to check the " General Ledger > Setup > Open/Close" screen, it asking the Ledger value to find out the periods.
    If i entered my primary ledger name on this field, its not matching.
    How to resolve this error.
    I am functional person. I dont have rights to see any database table levels.
    Please help me. Thank you in advance.

    Hi;
    Please see below notes:
    RVTPT-098: ORA-01086: savepoint 'START_TRX' never established [ID 987686.1]
    APP-PO-14230 Or APP-PO-14376 : When Saving Receipts [ID 552244.1]
    Run Masscancel Error App-Po-14230: The GL Date Is Not In An Open Period. [ID 1131265.1]
    Mass Cancel Error APP-PO-14230 GL Date Not In an Open Period, But Can Manually Cancel The Same Purchase Orders [ID 882329.1]
    Hope it helps
    Regard
    Helios

  • The Firefox 4.0 cookies window does not update while open

    While visiting different websites, the Firefox 4.0 cookies window does not update while open.

    See also related problems:
    Firefox 4.0 reopens the last webpage visited if the cookies window is open.
    https://support.mozilla.com/en-US/questions/801533
    Firefox 4 doesn't open in a homepage, but rather opens the last page I visited, which I HATE!!!!!!!!!!!!!!!!!!
    http://support.mozilla.com/en-US/questions/789325

  • ICal Week view, Date is not aligned with the Time(schedule) of each date

    Well, just like it says over there (`` ). I've recently been to China for a business trip, and I suppose the different time zone may have had something to do with the problem. Now I'm back home, changed the time zone back to normal, still the iCal shows in the weekly view that the Date on the above is not aligning with the Time and schedule. Any suggetions would be grateful!!!

    Hi,
    i omit the scheduling maergin key in material master,
    the result of MRP is
    BASIC DATES
    Finish 15.10.2009
    Start 14.10.2009
    PRODUCTION DATES
    15.02.2010 14:33:25
    14.10.2009 07:00:00
    scheduling type i planned order is still "backwards"
    so in MD04 it is say that the goods is available at 15.10.2009 same with requirement dates.
    this seem not right.
    it seems that order finish date is not adjusted by lead time scheduling on "today scheduling".
    Is there a way so order finish date is adjusted by lead time scheduling on "today scheduling" ????
    Best regards,
    Freddy Ha
    Edited by: Freddy Halim on Oct 14, 2009 10:01 AM

  • Hierarchy leaf not shown while data exists

    Hi experts,
    We have the following issue regarding the (in)visibility of hierarchy leafs:
    We know that transactional data exists for a particular item in the hierarchy (total value is zero). This item is not shown by default in the report output (while zero suppression has been turned off). There are a few ways to make the item visible, e.g:
         1. Deactivate the hierarchical display
         2. Filter on the item
         3. Filter on another characteristic value for which the transaction data doesn't add up to zero.
         4. .........
    However, we would like to show the item in any case, so even when the underlying transactional data sums up to zero.
    Has anyone faced a similar problem before? Any idea how to solve the issue?
    If necessary, I can send some screenshots with detailed information by email.
    Thanks in advance !
    Kind regards,
    Rene

    Hi,
    We had a similiar issue in the Cost Element Hierarchy & got resolution.
    I followed the below method an extract from SDN Forum reply.
    You need to make the InfoObject an InfoProvider. Then you create a multiprovider with your InfoCube and the InfoObject. When you create a query, insert a new column that contains the key figure 0ROWCOUNT and a restriction on 0INFOPROV to your InfoObject.
    When you right click on 0INFOPROV you now have the option to select Constant Selection. When you've turned it on you do a right click again and you're able to activate "Display non-posted values."
    Finally hide the new column and execute the query.
    Also we found out that for the nodes that were not appearing , the master data was incomplete. there was no source system assignment to those, we updated the field manually & with the above method the query worked.
    Regards
    Lalan

  • Error :-The requested resource does not exist while opening the adobe form

    hello Experts,
    We are in Portal implementation face with ECC6 EHP4 and Portal EHP1
    We have developed adobe  form using HCM forms and processes and done the required configuration in SPRO
    When we are trying to open the form from ESS we are getting below error
    404 not found
    The requested resource does not exist.
    Please look into this issue and let us know any thing we are missing
    Sincerely
    Paresh

    is ADS working correctly?
    1.  Use transaction SA38 to execute the program FP_TEST_00.
           Detailed information about this test program and about how you
           should then proceed is given in the Adobe Document Services
           Configuration Guide in the Help Portal under:
           http://help.sap.com/saphelp_nw2004s/helpdata/en/37/504b8cbc2848a4
           94facfdc09a359b1/frameset.htm -> Adobe Document Services
           Configuration Guide -> Configuring the Web Service -> Securing
           Access to the Web Service ->Configuration Check -> Configuration
           Check for PDF-Based Forms in ABAP
           -  If the FP_TEST_00 form is displayed in the print preview, the
              ADS configuration is correct.
              -> If you use scenarios with an interactive PDF, proceed with
              point 5. Otherwise, proceed with the test under point 6.
           -  If the system displays an error message instead of a form, the
              configuration of ADS is incorrect.
              -> Carry out the additional tests from point 2 onwards.
    2.  Use transaction SA38 to execute the program FP_PDF_TEST_00.
        This enables you to check the RFC connection to ADS  (see the
        reference to the documentation given above).
           -  If the system displays the version number of ADS, the
              configuration of the RFC connection is correct.
    read the note 944221
    Please paste the whole error? Is any dump in ST22

  • Ios 5.1: my calendar dates are not shown in the notification center

    My calendar dates (from today and tomorrow) are not shown in the notification center. Under notifications I have activated the calendar app. What can Ido?

    IOS / is no out for a couple of weeks and Apple seems to be reluctant to fix this problem. As a business device it becomes rediculous to be not able to see my calender entries anymore in the notification center. Is Apple now leaving the business arena and focusing on toys ?

  • Safari 6.0.1 not responding while opening Youtube or any other websites.

    Hi,
    My safari is getting frozen and am getting the noise when its trying to consume more resources (just while opening webpages). The only process that was running is safari and its started using 99% of my CPU. Can someone please help?
    Sathish.R

    hi,
    i had the same problem after update.anyway its just permission problem on Safari directory.
    1,     Open Terminal
    2     sudo or login as root
    3,     chmor 775 /Users/username/Library/Safari/ ( i did it, since i dont care about the permission on this directory)
    4, u reply back happily if ur problem is solved
    and i am sorry abt my language, am not english speaking and i dont know much abt mac just bought it last week.
    see ya

  • Error : 404 not found while opening Ciscoview from Campus manager with LMS 3.2

    Hi Friends,
    While opening ciscoview from Campus Manager Topology, getting error 404 not found by apache web server. pls guide me to resolve this issue if anyone faces the same situation earlier.
    Thnx

    The name of Enterprise Manger service is em you can find it under deployments in weblogic console. Its status should be active and ok.
    Have you tried this
    http://technasir.blogspot.com/2013/04/enterprise-manger-is-not-working.html
    regards
    Nasir

  • Glowing orbs NOT shown for open applications mac os x lion AFTER 10.7.2 update

    been experiencing this weird bug ever since i updated to the 10.7.2,applied the thunderbolt display update(10/27) and the imac firmware update (10/27) When i click to open/launch applications,the glowing orbs are not shown underneath the open applications. when i log out or restart the problem is temporarily fixed.Has anybody else experienced this as well or have a fix for it? thank you in advance!

    I've also noticed this. In my case, it's odder than what you describe.
    When I close the last window for an app (like Mail or TextEdit) but do not quit the app, and then switch focus to another app (like Safari or even Finder), sometimes the indicator light remains lit like it should (since I have not quit the app) but other times it goes out.
    When I check in Activity Monitor, the app is still shown as being active even though its indicator light is not lit. The unlit but active app is also not available via app switcher (Command-Tab).
    If I go back to the app by clicking its icon in the Dock, it loads fast; if I then quit it, it disappears from Activity Monitor like it should.
    Seems to be a Limbo status at play.
    And, yes, Dock prefs are set to show indicator lights.
    I don't have a solution.

  • Line item data is not saving while creating a Sales order using Interactive

    Hi all,
    I am creating a sales order Using Interactive forms. In the form i am having Header data and line item data.I had created two structures one for Header data and one for Line item data. For entering  the LINE ITEM DATA i had created a Dynamic table with Buttons ADD ROW and DELETE ROW.
    User will Add the Row or Delete the Row based on the requirement.
    My issue is When ever the user clicks the SUBMIT button after entering the header data and 3 line items data , Sales order has been created with only first line item and the remaining two line items are not created.
    My Interactive form is like below
    HEADER DATA
    DOC_TYPE
    SALES_ORG
    DIST_CHN
    DIVISION
    PURCH_NO
    PARTN_ROLE
    PART_NO
    LINE ITEM DATA
                             ITEM_NO      MATERIAL          PLANT          QTY        COND_TYPE            COND_VALUE
    ADD ROW
    DELETE ROW
                                                                                    SUBMIT
    My  code for the method ONACTIONCLICK is like below
    method ONACTIONCLICK .
    data:
          Node_Adobe       type ref to If_Wd_Context_Node,
          Node_Zsaleheader       type ref to If_Wd_Context_Node,
          Elem_Zsaleheader       type ref to If_Wd_Context_Element,
          Stru_Zsaleheader       type If_Main=>Element_Zsaleheader,
          Node_Zsaleitem       type ref to If_Wd_Context_Node,
          Elem_Zsaleitem       type ref to If_Wd_Context_Element,
          Stru_Zsaleitem       type If_Main=>Element_Zsaleitem.
      data: header_data type BAPISDHEAD.
      data: item_wa type BAPIITEMIN.
      data: item_data type table of BAPIITEMIN.
      data: partner_wa type BAPIPARTNR.
      data: partner_data type table of BAPIPARTNR.
      data: sales_order type BAPIVBELN-VBELN.
      data: Errorlog type BAPIRETURN1.
    navigate from <CONTEXT> to <ADOBE> via lead selection
      Node_Adobe = wd_Context->get_Child_Node( Name = IF_MAIN=>wdctx_Adobe ).
    navigate from <ADOBE> to <Zsaleheader> via lead selection
      Node_Zsaleheader = Node_Adobe->get_Child_Node( Name = IF_MAIN=>wdctx_Zsaleheader ).
      Node_Zsaleitem = Node_Adobe->get_Child_Node( Name = IF_MAIN=>wdctx_Zsaleitem ).
    get element via lead selection
      Elem_Zsaleheader = Node_Zsaleheader->get_Element(  ).
      Elem_Zsaleitem = Node_Zsaleitem->get_Element(  ).
    get all declared attributes
      Elem_Zsaleheader->get_Static_Attributes(
        importing
          Static_Attributes = Stru_Zsaleheader ).
      header_data-DOC_TYPE = Stru_Zsaleheader-DOC_TYPE.
      header_data-SALES_ORG = Stru_Zsaleheader-SALES_ORG.
      header_data-DISTR_CHAN   = Stru_Zsaleheader-DISTR_CHAN.
      header_data-DIVISION = Stru_Zsaleheader-DIVISION.
      header_data-PURCH_NO = Stru_Zsaleheader-PURCH_NO.
      partner_wa-PARTN_ROLE   = Stru_Zsaleheader-PARTN_ROLE.
      partner_wa-PARTN_NUMB = Stru_Zsaleheader-PARTN_NUMB.
       append partner_wa to partner_data.
        Elem_Zsaleitem->get_Static_Attributes(
        importing
          Static_Attributes = Stru_Zsaleitem ).
      item_wa-ITM_NUMBER = Stru_Zsaleitem-ITM_NUMBER.
      item_wa-MATERIAL   = Stru_Zsaleitem-MATERIAL.
      item_wa-PLANT = Stru_Zsaleitem-PLANT.
      item_wa-REQ_QTY = Stru_Zsaleitem-REQ_QTY.
      item_wa-COND_TYPE   = Stru_Zsaleitem-COND_TYPE.
      item_wa-COND_VALUE = Stru_Zsaleitem-COND_VALUE.
      append item_wa to item_data.
    CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
      EXPORTING
        ORDER_HEADER_IN           = header_data
      WITHOUT_COMMIT            = ' '
      CONVERT_PARVW_AUART       = ' '
    IMPORTING
       SALESDOCUMENT             = sales_order
      SOLD_TO_PARTY             =
      SHIP_TO_PARTY             =
      BILLING_PARTY             =
       RETURN                    = errorlog
      TABLES
        ORDER_ITEMS_IN            = item_data
        ORDER_PARTNERS            = partner_data
      ORDER_ITEMS_OUT           =
      ORDER_CFGS_REF            =
      ORDER_CFGS_INST           =
      ORDER_CFGS_PART_OF        =
      ORDER_CFGS_VALUE          =
      ORDER_CCARD               =
      ORDER_CFGS_BLOB           =
      ORDER_SCHEDULE_EX         =
    endmethod.
    PLEASE SUGGEST ME IF ANY CODE CHANGE IS REQUIRED
    Thanks in advance
    Ajay

    Hi,
    The item data is not read because, the dynamically added rows should also reflect back to the Web Dynpro context. When the user clicks on Add Row, use the Onsubmit event to add a empty line to internal table and then bind it to the context. And if the user removes a row, remove a row from internal table and bind it back to the context.
    You may refer this article.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/802f0ed1-a17a-2c10-7db4-d515a5b047ed
    Regards,
    Runal

Maybe you are looking for

  • How to use "Oracle Real Application Testing"

    I am analyzing if/how my employer can make best use of "Oracle Real Application Testing". I therefore read various documentation and articles as well as the relevant sections in the "Oracle® Database PL/SQL Packages and Types Reference". However, the

  • How to display field of 250 character length using ALV Grid display

    Hello Experts, Currently I'm using 4.6 version. I got to insert a new field of length 250 characters into an existing ALV grid display. I passed a value of length 250 chars into the field and assigned it to the itab passing to the fn module 'REUSE_AL

  • Question about abap

    I would not write so rigid formula in this transformation. In fact, the formula changes often and I would not manage the change in the formula by creating a systematic OT. i want  write this formula in a table or infoobject and so I could change my f

  • Blatant newbie question: inner classes

    I'm trying to pick up java (finally) and am working my way through the tutorial. I am unclear as to how exactly the Class2.java program works, in the Classes and Inheritance lesson (questions page). Specifically, when I did the exercise, I 'oopsed' a

  • How to compare two PDF files through PLSQL

    Hi, Can any body help that how to compare two PDF files through PLSQL programing and gives the differences as output. Thanks,