Corrputed loaded text from an Export Datasource with Unicode

Hi Experts
I am new with BW and this forum helped me a lot in the past year.
I am loading texts to an InfoObject using a Master Data (texts) Export DataSource from another InfoObject. The system is NetWeaver 2004s (BW 3.5) with Unicode.
The InfoObject's Text MD is Language Dependent but users enter the system only with EN language.
For some reason the loaded texts are corrupted.
For example: The original InfoObject has Hebrew texts (that were loaded perfectly from the source system which is also Unicode), but the text in the PSA table and in the text table of the target InfoObject will be: ###########
Can anyone help?

Hi Niraj
Thanks for your answers
Let me explain:
Currently, we load texts with Hebrew chars from the SAP ECC6 system and everything is good (we see Hebrew chars in SAPGUI/BEx/WAD etc.)
The problem occurs when we load these texts from one InfoObject to another, via Export DataSource.
To do that, We generated an Export DataSource for the original InfoObject and assigned it to the target InfoSource of the other InfoObject. After running an InfoPackage for this DataSource, the texts that were loaded to the PSA (and hence, to the target InfoObject texts table) were corrupted - which means that they appeared: ##########
Thanks,
Yaniv

Similar Messages

Flash CC Air iOS: Problems with loading text from an external xml located on a server.

So I have this code allowing me to load text from an xml located on a server. Everything works fine on the Air for Android. The app even works in the ios emulator, but once I export my app to my ios device with ios 7, I don't see any text. The app is developed with Air sdk 3.9. What could be the reason? Do I need any special permissions like on Android? Does ios even allow to load xml from an external server?
Any clues?

It was my bad. I linked to a php file to avoid any connection lags, which was absolutely fine on the android, but didn't seem to work on the ios 7. So all I did is change the php extension to xml and it worked without any problems.

BI 7.0 : Error in loading text of a Master Data with a data source time dep

I have a problem loading text from the data source(time dep) to the Master Data.
For instance if the Data Source 0EVALGROUP1_TEXT is time dependent as there are the fields DATETO and DATEFROM, while i create the transformation these 2 fileds does not have any target fields. After i create the infopackage and execute it to load into the PSA, i have a error message : the message says "An error occurred in the source system."and "The error occurred in Extractor "; and the PSA is empty.
Can anyone tell me if there is an OSS note to apply for this kind of problem, actually we are running under SAPKW70015 SAP_BW.
Thanks for your help.

Hi,
Pl try the below
The l_dta data target that you want to load is an InfoObject (master data or text
table).
You must declare this for the InfoProvider in Transaction RSD1.
You do this on the 'Master Data/Text' tab by assigning any InfoArea to the InfoObject.
The InfoProvider (that is, this InfoObject) is then displayed below this InfoArea in
the InfoProvider tree.
Rregards,
Senthil

How to load data from a virtual cube with services

Hello all,
we have set up a virtual cube with service and create a BEx report to get the data from an external database. That works fine. The question is now:
Is it some how possible to "load" the data from this virtual cube with service (I know that there are not really data...) into an other InfoCube?
If that is possible, can you please give my some guidance how to set up this scenario.
Thanks in advance
Jürgen

Hi:
I don't have system before me, so try this.
I know it works for Remote Cube.
Right Click on the Cube and Select Generate Export Data Source.
If you can do this successfully, then go to Source Systems tab and select the BW. Here, Right CLick on select Replicate DataSources.
Next, go to InfoSOurces, click on Refresh. Copy the name of Virtual Cube and add 8 as a prefix and search for the infosource.
If you can see it, that means, you can load data from this cube to anywhere you want, just like you do to ODS.
ELSE.
Try and see if you can create an InfoSpoke in Virtual Cube. Tran - RSBO.
Here, you can load to a database table and then, from this table, you can create datasource, etc.
ELSE.
Create query and save it as CSV file and load it anywhere you want. This is more difficult.
Good luck
Ram Chamarthy

Texts from non-infoobject datasource

Hi all.
In SAP source system I got table with additional attribs for CUSTOMER:
CUST_STATUS
CUST_STATUS_TEXT
CUST_WAREHOUSE_STATUS
CUST_WAREHOUSE_TEXT
I've created data source for the table. Z_CUST_ENHANCE
I've created CUST_STATUS and CUST_WAREHOUSE_STATUS infoobjects with texts. I got duplicate key error messages while loading data directly from the Z_CUST_ENHANCE datasource (whic is logic).
How I'm supposed to load texts and keys into CUST_STATUS, CUST_WAREHOUSE_STATUS info-objects?

Hi,
Try this method:
Make those objects as master data infoobjects vt texts.\
Now create 4 DS for loading those IDs and Texts into those objects.
While loading kane use of direct update.
Revert back for further queries.
Regards,
Rajknadula

How to load hierarchy from file into InfoObject with compounding Attr & LN

Hi,
I have created an InfoObject called YCOSTC0 which has a compounding attribute 0CO_AREA. and Text is Lanugage dependent, hence the key is YCOSTC0, 0CO_AREA and LANGUAGE, now when i load hierarchy from flat file as mentioned below, it creates duplicate blank rows in master data table, becuase the flat file contains only the YCOSTC0 Info Object and this data gets loaded into 0CO_AREA column in master data table which is the first column. how can i load hierarchies from flat file into an InfoObject that has a compounding attribute and Language dependent. please provide me a sample file structure with data.
NodeID     InfoObject     Node Name     Link Name     Parent ID     Language     Short Text     Medium Text     Long Text
1     0HIER_NODE     CC_HIER               EN     Cost Center Heirarchy     Cost Center Heirarchy     Cost Center Heirarchy
2     YCOSTC0     C001          1     EN     CC 1     Cost Center 1     Cost Center 1
3     YCOSTC0     C002          2     EN     CC 2     Cost Center 2     Cost Center 2
4     YCOSTC0     C003          2     EN     CC 3     Cost Center 3     Cost Center 3
5     YCOSTC0     C004          3     EN     CC 4     Cost Center 4     Cost Center 4
6     YCOSTC0     C005          3     EN     CC 7     Cost Center 7     Cost Center 7
7     YCOSTC0     C006          4     EN     CC 5     Cost Center 5     Cost Center 5
8     YCOSTC0     C007          4     EN     CC 8     Cost Center 8     Cost Center 8
9     YCOSTC0     C008          4     EN     CC 10     Cost Center 10     Cost Center 10
10     YCOSTC0     C009          7     EN     CC 6     Cost Center 6     Cost Center 6
11     YCOSTC0     C010          6     EN     CC 9     Cost Center 9     Cost Center 9
Thanks
Akila R

Hi -
    Check the following link.
Hierarchy Upload from Flat files
Anesh B

Problems with displaying text from gtk+-2.0 with Cairo

I've got a 64-bit app that uses gtk+-2.0 (2.8.17 with Cairo). I had to build my own libraries since the gtk+-2.0 libraries Solaris 10 ships with is 32-bit only (and does not contain Cairo support). The app is statically linked so that our customers don't have to do any more than just install the app.
I've got a customer who's using a Sun Ray 2fs to run our app from a Sun Ray server. The problem is that none of the text in the UI is readable (including the menubar). He sent a screenshot and I can tell it's rendering the glyphs, just not correctly. The best way of describing the text rendering problem is to take a bitmap of antialised text drawn with a black pen color. Now remove all non solid black pixels. You only see pieces of the glyphs (typically, just the vertical and horizontal parts).
We don't have a Sun Ray client to test with but for testing purposes, I installed our app on freshly built Solaris 10 (5/09) and Open Solaris systems with no modifications to the virgin systems. I could run our app on both Solaris systems and display the app on a remote X display just fine. I asked the customer to try a real X display and he ran X-Win32 on a Windows XP guest using VirtualBox on the Sun Ray server and our app appeared just fine on his Sun Ray client. I told him if our app displays just fine on a real X display, then the problem must be with the Sun Ray server.
Has anyone encountered this problem? I'm going to try building the latest gtk+-2.0 libraries but I'm not convinced it's going to do any good. I don't think it's a Fontconfig configuration problem because our app worked out of the box on freshly installed systems (unless perhaps Sun has made changes to /etc/fonts/fonts.conf since the version on his system versus ours).
PS. We actually need the Cairo graphics support. It just happens that the version of Pango that's in 2.8 (and all versions of gtk+-2.0 since) also uses it for text rendering in the widgets.

Garrett Cobarr wrote:
> I have been attempting to import text from Illustrator
CS2 into Flash 8. I
> would like to retain the layers if possible.
>
> I am having many different problems as I have
experiemented at the AI side.
> One is having the text come in with the outline offset
and no longer alligned.
> When I drag and drop, the outline completly dissappers.
The text when it does
> come in is converted to a png and longer has the layers
seperated.
>
> I am also getting a message in the report window, on
some of my tries, that it
> is an improper PDF.
>
> The bottom line question is: What is the recommended
method of importing text
> from AI CS 2?
You have to remember that both programs are totally different
animals and simply
some of the option used by you in AI won't be working or
can't be translated into
flash's environment. You will never get editable content,
just an image.
Export to SWF from AI and import that SWF to flash. Should be
as close as possible
to original file tho I can't assure your layers will
maintain.
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Loading text from a .txt file

I want to do something that should be VERY simple, but due to
Adobe's insistence on using #$%^ing tutorials instead of just
providing step by step instructions, it's very frustrating to
figure out how to do it.
All I want to do is load the contents of a text file into a
dynamic text field, but I can't figure out how to do it (I'm not
all that familiar with AS). I'm working with Flash 8. Please help.
Thanks.

Create the dynamic text box, and name it schedule.
Then, in the frame on the timeline that the text box resides
in, the corresponding actionscript would be used to create a text
variable and assign the text from a txt file to it:
loadText = new LoadVars();
loadText.load("externalfile.txt");
loadText.onLoad = function() {
schedule.text = this.textbody;
Where does the "textbody" variable come from? In the external
text file (externalfile.txt in this example), you have a variable
called textbody, and the externalfile.txt should read along the
lines of:
textbody = "I'm the external text that needs to be read
in"

Photoshop touch can I edit the text from a psd file with that app ....

Can photoshop touch edit the text from a psd file from my iMac on my ipad with that app ....

I don't think you can because a Photoshop file (PSD) with layers will be flattened when you open up in Photoshop Touch.
I prepared a Photoshop file with one layer of image, one layer of text over a background using Photoshop CS6 on my Mac Pro and upload the PSD file onto Creative Cloud. I then open this file in Photoshop Touch (on iPad) but it comes out as a single flat layer merging all three layers. Hope this helps.
Below: 3 layers in Photoshop CS6 (with one layer of text)
Below: Flattened into one layer in Photoshop Touch..

I need to input text from PC to iPad with large font size. Too much to ask?

Works well with PC to PC using just software likge Windows Live Messenger, but not with iPad because I haven't seen a Messenger app for iPad that can display large fonts or has custom font size option. They all use small font size that can't be changed.
I've also tried many VNC apps by writing the text in my PC to notepad and using the VNC to display the large text for iPad. Probelm is VNC's wont work well with 3G.
Is this really too much to ask from iPad?
If some app developer reads this, I'll buy an app for 50$ that has white background and can receive text sent from PC with custom font sizes. Doesn't have to have any other features. Just receive text from PC using the existing IM softwares like Windows Live etc or simple custom software.

I was wondering if you could help me out with my current situation. It seems like it is similar to your previous I/O delima. I think I might have to parse the data, but i dont know how to do that yet. I basically have to put the information from one text file into a database, and it is formatted in one way, and i need to format it a different way that SQL statements can read. Here are 2 entries of about 12,000 that i have in one text file:
1
UI - 4
TI - 117-28
Y2 - -32676
RP - NOT IN FILE
SO - <None Specified> -1 ;():
2
UI - 11721
TI - The mechanism of genetic recombination in Escherichia coli.
MH - mechanism
MH - recombination
MH - Escherichia coli
RP - NOT IN FILE
SO - Cold Spring Harb Symp Quant Biol 1953 ;18():75-93
This is only 2 of the records, You notice that the record number is first, followed by another field ex. (UI), which then the data stored in that field are after the "-"
Thanks for your help

How to load data from file contains rows with different number of columns

hi all,
a data file contains assets data ordered like this(location_id
serial_number , quantity
serial_number , quantity
single column rows represents location, and two columns rows represents asset details for that location
123
12345 ,1
32145 ,1
124
12348 ,12
41239 ,22
54189 ,2
254
22419 ,1
I want to use sql loader to load these data after merging locations with thieir assets,like this order(location_id,serial number,quantity)
123 ,12345 ,1
123 ,25413 ,1
123 ,32145 ,1
124 ,12348 ,12
124 ,41239 ,22
124 ,54189 ,2
254 ,22419 ,1
Can one help me in that?
thank you,

Create external table and code sql query to do it.
:p

When I send a text from my imac friend with verizon receives duplicate text

When I send a friend a text from my imac she receives it in duplicate. She has Verizon. But when I send her a text from my Verizon phone she only gets it once. Any ideas why?

Hi,
Are you using Mail to send these text messages? My experience has been that Mail always sends the text of a message twice. I don't use Mail but my wife and father do, and their messages are often repeated. I think. Maybe there's some way to avoid this by using particular settings in Mail. I would recommend turning off any fancy font settings, and not putting in any attachments, and see if the messages are still duplicating the text. I'm going to try that myself when I get a chance.
Andy

Shows I got text from numbers that start with 000

Looking at my bill. It shows I got text from 000-008-0153... What would that be from?

Staying on top of your usage is important, Jeff7777. Normally messages from a 5 or 6 digit short code are special offers from companies. Although I am unable to determine who that short code belongs to, you can opt out of premium messages by texting "Stop" to the shortcode.
AndreaS_VZW
Follow us on Twitter @VZWSupport

Copy paste text from pdf exported from Microsoft.Reporting.WinForms.ReportViewer control with Czech specific characters produced box charactex or ?.

Used Visual studio 2012. In our project there is used the Microsoft.Reporting.WinForms.ReportViewer control. In the report handled by the control are TextBoxs with a text with Czech specific characters e.g. (ř, ě, ...) . When exporting the report to pdf,
characters are displayed correctly. However when the text with czech characters in the pdf if copied and placed into the seach box in the pdf document only box characters are displayed. The TextBox in the report use the default font Arial. When the report
is exported to Word, and then the Word document is saved as a pdf document, its ok. Coping a text with Czech charactes in the result pdf document and pasting into the search box displays again Czech characters not box characters.
Also when in the report handled by the ReportViewer control are several Tex Boxes and some of the boxes contains Czech characters and some not, after exporting to a pdf document there is problem with text selection. When in the pdf document I'm trying to
select several paragraphs, some with Czech characters and some without them, selection behaves strangely and jumps from one paragraph to another unexpectedly.

Hi,
did you managed to avoid those squares?
BTW: if any such char. is encountered in a line, the entire line of text is grabbled.
I've tried even the ReportViewer from MSSQL 2014, but got the same problem. When I've tried IL Spy, I found a code, where it is checked if the PDFFont is composite - depending on that a glyph is created. But that still only a guess.
I've tried Telerik's reporting, they have similar problem (beside other), but not with the special characters. They produced scuares for some sequences like: ft, fi, tí.
Please give any info you got.
Until then my advices for you:
a) try JasperReports (seems theyre most advanced, although it is java)
b) Developer express has quiet quality reports - and it seems they got those special chars. right :D
c) I created a ticket and waiting for Telerik's response (but if I had to choose reporting, I vould stick with a) or b)

Loading text from one app to another

If we are using text members and we want to transfer comments from one app to another.
our steps are as follows.
1) Export indicators in Essbase
2) LCM text members out of one app to import into the other.
3) load indicators in new app
4) load LCM file to new app.
The wrinkle is the following
App 2 already has the exact same member for text and there is already text in separate spots (no overlap - think 2 different versions). But what about the number system when we bring it back in.
Has anyone done this where you have to reallign the indicators in the relational database and essbase so that nothing gets crushed?
We are thinking of editing the files and create new numbers. Will that work?
This is version 11.1.2.2

Hi,
Mode of updation is delta.
ZCUBE_2 already contains data from Aug. to March
My problem is m not able to move March onwards data.
Till today my delta was working fine.But i had to delete April data. Now i want to reaload it.
Before deleting i tried to load 10 daya data all together, it reloaded successfully. Now i have to reload 48 days data, its not loading.
I also to restict period in filter option, then also no data availabe is coming.

Corrputed loaded text from an Export Datasource with Unicode

Similar Messages

Maybe you are looking for