Corrupt Display in PP CS6 During Hover Scrub

I'm running Premiere Pro CS6 on a Win 7 x64 machine with 12GB RAM with an ATI HD 4800 graphics card. When I use hover scrub in the project window the video image goes inverted black and white and upside down! This often leads to the same problem with the display in the program window. Exiting and restarting does the same thing. If I don't use hover scrub I have no problems with the video display and can produce projects without problems.
This also happened with Encore and a photo slideshow but the results were more colourful!
Graphics card drivers are up to date, as are OS patches and Creative Suite patches.
Any ideas? I'm not using any specialised video hardware
Premier Problem (above)
(Encore problem above)

Yes, I have the same problem. Radeon HD 7950 with the latest drivers 8.01.01.1215 on windows 7 all service packs applied. The problem is frequent enough to be totally unproductive but sometimes Premiere keeps running for quite a while.
In my case my system blue screens and I need to boot up and start again. The problem seems to occur due to what is going on in the media library. Scrub never works unless the windows are large enough.
In the above image media is imported but none of it is touched. All looks well.
As soon as I move my mouse over the video the scrubbing starts but it renders weird.
The top right tile is being scrubbed. You can see how the video consists of various tiles that are scrambled. This does not happen when the video window is big enough. In this case the video contains color but sometimes it does not. Crashes happen in both cases very frequently 1 or 2 times per hour and sometimes continuously. I suspect it is a driver issue with ATI. It be the first and last ATI card I ever buy but I am stuck with it. It be nice if I could actually use the software though.
The above example shows scrubbing when the thumbnail is big enough. The Black and White / upside down effect occured with these same files in the same project about 1 hour ago.
[UPDATE]
In the very same screen shown above the PC blue screened as soon as my mouse moved over the bit you can see of the bottom right thumbnail. Sigh.

Similar Messages

Multi-Monitor PSE 9 Corrupt Display

Multi-Monitor PSE 9 Corrupt Display
Evening all -
First post here at PS Gurus. I hope that you guys can lend your expertise in pinning down an issue that I am having and have also had on other PS versions. I am running
Windows 7 (64 bit) Ultimate
2600k / 8 gb ram / 256 Samsung SSD / 460 GTX 1GB
Matrox Triplehead 2 Go with x3 22" monitors (resolution 5040 x1050)
A fresh install of the trial version of PSE 9 is yielding corrupt main toolbar and options bar (for each tool selected). The application is expanding full screen on all three monitors just fine but the toolbar are corrupt - partly transparent / party compressed to the left. No matter what I have done in terms of resizing the application window the results are the same or get worse.
On another computer I installed PS CS5 (also under win7 64 bit environment) and I was having the same issue. However, at the time I thought the install was bad in some shape or form so I dropped the issue.
I am now considering PSE 9 but see that Win7 + Matrox just isn't working correctly with this combination of hardware / software components.
Has anyone see this issue or know of a potential fix? I have read a couple of threads on the net with similar issues but I don't see any resolution. Your help is greatly appreciated.
Thanks-
Benjamin

My main reason for testing PSE-O 9.0 was to find out if this "bug" was fixed. I can not use PSE-O to organize and show pictures the way I want to with this weaknes in place. Your answer is probably correct, bun not at all helpfull.
So thank you for trying, but my test of PSE O is over for now.
Does anybody out there know of other products that will do the trick?

Apples update didn't work for me: Boot Camp: iMac displays a black screen during installation of Windows 7

Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple Support
I have followed each of the steps listed in the link above with no success.
Prior to adding the extra drivers I was able to start the Windows install process up to reformatting the "Windows" Bootcamp drive. After that the computer would go through some instal processes and eventually restart. After the restart the screen would go black. The black screen lead me to the Apple Support link above dated March 5 2015. After going through steps listed in the link above, I get an error message stating that the D:\Sources\instal.win. file cannot be located. I am forced to restart the computer at that point and theWindows install process attempts to start again but always ends up at the same point.
Note: I am installing windows 7 Pro from a DVD. I scanned the AutoUnattend.xml file and noticed that it refers to "Windows 7 ULTIMATE" but not "Pro" or any others that I could see. (see below). Could that be part of the issue?
Any feedback would be greatly appreciated.
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
iMac (27-inch, Late 2009)
2.66 GHz Intel Core i5
16 GB 1067 MHz DDR3
ATI Radeon HD 4850 512 MB

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

Hover Scrub doesn't work in bin

Hello,
When I hover scrub over my dailies it works fine. However, once I've synced my dailies and sorted my new merged clips into scene bins, they will no longer hover scrub (in the new bins, the raw dailies still do.) Any idea why, and how I might get it to work.
Barring that, how can I change my poster frame in the bin, right now i can't get them to do anything outside of the original raw dailies bin.
Chris Conlee

I have the same experience, once you create a merged clip, hover scrub doesn't work. Maybe a bug? Maybe a limitation of merged clips? I've submitted a bug report..... maybe i'll submit a feature request as well.
MacPro 4.1
OSX 10.7.4
Pr 6.0.1
CUDA 4.2.10

IMac displays a black screen during installation of Windows 7

I tried to install windows 7 on my imac 27" but imac displays a black screen during installation of windows 7.
I also tried to install it as apples instruction of http://support.apple.com/kb/ts3173 but it failed.
Any solution please.. thanks
I have a late 27" imac with OS X 10.85

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

Adobe CSXS InfrastructureCS6 Installation failed. Error Code: U44M1P7 for CS6 during exchange update

Adobe CSXS InfrastructureCS6 Installation failed. Error Code: U44M1P7 for CS6 during exchange update on Windows 7.
Please advise... It appears that some programs available in CS6 did update, just not PS, AI or some of the other programs needed for my current classes.
Thank you,
tjr

Try following the steps outlined in this blog post:
http://acrobatninja.com/2013/07/fixing-csxs-infrastructure-update.html

"Corrupt content from reliable source" during download

All,
When attempting to download and install Flash 10.3, I'm greeted with the error message "Corrupt content from reliable source" during the initial download. The installer never gets to the "installing" phase, as it appears to hang while downloading the actual install file. I've tried clearing all content (history, cookies, temporary internet files, etc) with no luck.
This is on Internet Explorer 9 running Windows 7 SP1.
Any help would be greatly appreciated.
Thanks!

There is a new version of Flash (10.3.181.4) that was released today, but according to the archives it has a date stamp of 8/9/2009 and is unavaiable. I'm sure we'll have to wait for them to correct the date error in this download before it becomes available.
Until then, as a workaround, you can visit the archive pages at http://kb2.adobe.com/cps/142/tn_14266.html and download the 10.3.181.34 version.

Hover Scrub on merged clips

Once I merge clips, I cannot hover scrub and any the poster frames I made previously are no longer there. Is there anyway to do this or am I SOL.

Thank You. I've decided on the work-around of setting a marker in the source monitor. It changes the Image in the bin to the in mark. I still cannot hoverscrub, but this will do for now.

ACE: Corrupted display on show crypto csr-params

Hi,
I am getting corrupted display on below entry. Is this normal ? How can I delete the garbled entry in the display.
FRONTEND_LBR1/Admin# sh crypto csr-params all
+r
$+r
$

Have you configured any csr-params?
I have seen this when there is no csr-param configured on ACE.
If you have configured atleast one csr-params and you are still getting it then its a bug.
Syed Iftekhar Ahmed

'Change bitmap' during hover

Hi, I created a filmstrip effect in Edge Animate. I want the to change the jpeg during hover, but I can't find this option. Am I missing something?

Try using either:
.css({'background-image':'images/yourimage.jpg});
On div in symbol
Or
.attr('src','images/your image.jpg});
Here change div to img.

Corrupted clip freezing FCP X during background rendering.

When I open a particular project, the background rendering starts up and gets to 35% where it then freezes the whole job.
Had to do a Force Quit.
This first occured during colour/exposure modifying, btw.
On start up of FCP I can review the video in the project window and see that a small part of one clip is corrupted, but as soon
as I open FCP (10.0.7) it attempts the backgound render before I can stop it, there-upon freezing.
Can the particular offending clip be successfully removed before I open FCP?
15" MBP with retina display, OSX 10.8.2
Thanks in advance.
Andrew

BenB
Thanks for that - "selected", but not "opened" I see.
Also, I reckon they should change the confusing menu item "Project Properties" to straight "Projects" Yes-No?
RussH
The particular clip would jump around - black frames-out of position frames -staccato playback.
As I said, this was after I'd tried colour adjustments that wouldn't render beyond a certain point.
Thanks for that lead to Pro Maintenace Tools. Does it work specifically with FCP X? Will check it out.
I do have the very handy Event Manager X.
Thanks all

Corrupted Files in PS CS6

While working in Photoshop CS6, large rectangular blocks of missing and/or distorted pixels suddenly appear. They affect all layers, effectively ruining the entire file. I closed the file without saving, thinking that when I quit Photoshop and reopen the file, it will preserve the last saved version (pre-corruption), but this is not so. For some reason, the corruption affects even the previously saved version of the file. In other words, I have to be always holding my breath using Photoshop, for fear that my work may suddenly be destroyed.
Why is this happening, and how can I fix it?
ANY HELP WILL BE GREATLY APPRECIATED!!

Thanks for the reply.
Yes, I can zoom in on them, and they are consistent. Do you suspect this indicates a hardware issue, such as bad RAM or a failing hard drive? Not sure if it's relevant, but Photoshop is the only application that gives me any problem; Adobe Premiere works just fine. Not that that means it's not a hardware problem.
Much appreciated!

How to display the error message during the web dynpro application runtime

hi,
    I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
    But when i do the same on server-2,there just show something like:
            500   Internal Server Error
                                SAP NetWeaver Application Server 7.00/Java AS 7.00
            Failed to process request. Please contact your system administrator.
but the server-1 will stop the j2ee engine.
how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
Appreciate your inputs...
(Note:server-1 and server-2 have same software version)
Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

The Sap-Notes 962319:
1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
If it is undefined, proceed with the next step.
If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
Always consider restarting the system after making changes on the settings.
It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

Photoshop Elements 10 - Corrupt Display

Good evening -
   I finally broke down and bought a new DSLR camera. Now, I only need an editing software to tighten up the images. The only problem I am having is that Photoshop Elements 10 (and 9) GUI does not want to play well with my current rig.
Key components:
1) Win7 Ultimate 64
2) eVGA 460 1GB
3) Matrox 3H2Go with 3x22" lcds
No matter what I try to do, the menu bars are corrupt upon opening PE.   I have tried eliminating any desktop themes, GPU driver is most current, hardware acceleration off etc etc.
Any thoughts as to what might be going on? I am sure it's related to scaling of the GUI with the Matrox Triplehead display.   It's the only program I have issues with in terms of working in this 3 monitor setup.
   I have 29 days to nail this issue before I have to wait until release 11 comes out
Notice the menu bar is transparent?   I am looking for any suggestions.
This is why I run in x3 monitors...so don't say use one monitor

The editor prefs often get corrupted. You may need to rebuild the editor preferences to resolve any conflicts.
Hold down the Ctrl+Shift+Alt keys and simultaneously click on the Edit button on the welcome screen. Release the three keys and look behind the welcome screen by closing it. Or hold down the keys whilst double clicking on PhotoshopElementsEditor.exe
You should see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?
Click on Yes
Close down Elements and re-open it in the normal way - then wait whilst it rebuilds the preferences.

[SOLVED] corrupted display after graphical mode

Hello,
I am new to ArchLinux.
After Installing the system, I followed the instructions on wiki.archlinux.org and managed to launch the graphical mode (xterm and even KDE).
However, it seems that after exiting the graphical mode, my screen is corrupted (I suspect that text console becomes corrupted during launching graphical mode but it is not visible until returning to text mode).
The Linux itself works properly (f.ex. alt+ctrl+del works ok).
I added only exec xterm to the ~/.xinitrc file and I am using MSI netbook with intel graphics card.
I attached two pictures describing the problem:
http://kdiablo.hostit.pl/img/DSC_0045.jpg
http://kdiablo.hostit.pl/img/DSC_0048.jpg
And logs from xorg:
http://kdiablo.hostit.pl/img/Xorg.0.log
I would be very helpful for any help!
Cheers,
KK
Last edited by kdiablo (2014-11-06 21:29:34)

I checked my graphics card as you advised.
# lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 0b)
I also found in the netbook's specification that:
CPU: Intel Atom Processor N2800/N2600 Series
Graphics: Intel GMA 3650
I could assume that indeed, https://wiki.archlinux.org/index.php/Intel_GMA3600 would be the proper driver for me.
However, based on information from the website, the kernel version - 3.17.2, and the xorg version - 1.16, I am quite worried if I can try to install these drivers.
Are there any newer versions/similar drivers available?
KK

Corrupt Display in PP CS6 During Hover Scrub

Similar Messages

Maybe you are looking for