Corruption of Photo files

I have recently updated my iphoto6 and imported a few pictures from my Canon Rebel X.
After doing so i discovered that iPhoto would open, but then freeze and not respond. Reading a variety of forums it would appear that this is because i have corrupt photo files.
The problem is that not only are a few of the most recently imported files been corrupted, but also a number of ones from previous rolls i had imported. These files do not open in either iphoto or Preview. When i attempt to do so from the Finder folder i get the an error message stating "Couldn’t open the file. It may be corrupt or a file format that Preview doesn’t recognize."
I unfortunately didn't back up these photos. Is there any way i can recover these corrupt files?
All my photos have also disappeared from my iphoto library but i am not worried about that as i can just rebuild the library.

did you ever figure out how to do this because i'm having the same problem.

Similar Messages

  • Ibook G4 using iPhoto 5. Some photos in library cannot be opened.               An error -couldn't open file. it may be corrupt or a file format that preview does not recognize.  HELP!!

    I have an ibook G4 using iphoto5.  Some photos in my library cannot be opened.  It hasn't always been this way.  I have tried to click and drag to a folder in finder and when i do i get an error !Coundn't open the file. It may be corrupt or a file format that Preview doesn't recognize.  Can anyone help in solving this problem?

    The only solution to corrupted files is to restore from your back up.
    Regards
    TD

  • Corrupted photo files in received emails

    Wonder if anyone is having a similar problem. 
    My wife and I each have a Gmail account.  The setup is that mail goes to an iPhone and a MacBook Air for me and an iPhone, an iPad and a MacBook Pro for my wife.
    When we receive some emails with photo attachments (the sender's email account is irrelevant, as it happens across various platforms) and open them in either the iPhone or iPad, the photo file is often corrupted. However, when we open the same email file in either laptop, the photo is fine.  In addition, if we go to the email stored in the Gmail server (All Mail), the attachment is not corrupted.  I can access the email in the Gmail serve, find the photo file to be OK, forward it and end up with the same result - OK on the laptop, corrupted on the iPhone.
    We have talked with the Apple help desk at a couple of stores and they feel that the issue may be caused by different servers being used by Google - i.e., one for mobile devices and one for non-mobile.  Neither help desk person had come across this issue.
    The thesis put forth after posting this issue in a Gmail forum is that the mobile device client is the problem, since the computer based clients work fine and display the files in the messages correctly.Therefore, the mobile client concerned either isn't downloading properly or it can't display correctly.
    Anyone else having this issue?

    The guys at the Apple store claim they have never seen the problem

  • Corrupted photo files in emails in iPhone and iPad

    Wonder if anyone is having a similar problem. 
    My wife and I each have a Gmail account.  The setup is that mail goes to an iPhone and a MacBook Air for me and an iPhone, an iPad and a MacBook Pro for my wife.
    When we receive some emails with photo attachments (the sender's email account is irrelevant, as it happens across various platforms) and open them in either the iPhone or iPad, the photo file is often corrupted. However, when we open the same email file in either laptop, the photo is fine.  In addition, if we go to the email stored in the Gmail server (All Mail), the attachment is not corrupted.  I can access the email in the Gmail serve, find the photo file to be OK, forward it and end up with the same result - OK on the laptop, corrupted on the iPhone.
    We have talked with the Apple help desk at a couple of stores and they feel that the issue may be caused by different servers being used by Google - i.e., one for mobile devices and one for non-mobile.  Neither help desk person had come across this issue.
    The thesis put forth after posting this issue in a Gmail forum is that the mobile device client is the problem, since the computer based clients work fine and display the files in the messages correctly.Therefore, the mobile client concerned either isn't downloading properly or it can't display correctly.
    Anyone else having this issue?

    iPhone. Sorry.

  • How do I recover the original jpg photo files from my computer? They are embedded in the iPhoto Library and I cannot see the actual file.

    I am trying to locate the original jpg or photo files that I uploaded from my camera. I know that the photos are there, because they show up in my iPhoto Library. Where can I go to find the original file ex: DSCN1242.jpg or OLM4564.jpg ?

    Select the photo in iPhoto and use the command "File > Export" and set the "Kind" in the Export panel to "Original". That will write a copy of the original to a folder you can access in the Finder.
    The command "File > Reveal in Finder" will show you the original inside the iPhoto Library, but you must not access the files this way. If you access them from other apps using the Finder, you will corrupt your library.
    See Terence Devlin's user Tips:
    iPhoto and File Management
    How to Access Files in iPhoto
    To what purpose do you need to find the files? Is there a problem and iPhoto giving an error message about missing originals?

  • Adobe Bridge Corrupts Canon CR2 files

    Viewing Canon CR2 RAW files from a Canon EOS 7D or Canon EOS 40D camera will corrupt some images. After Adobe Bridge creates a
    thumbnail of the CR2 files, some images previews will show the file with corruption (large white square or discolored areas). The CR2 file then
    becomes corrupt. The file is not corrupt prior to viewing in bridge, but it becomes corrupt after viewing in bridge. The file is corrupt because it can
    no longer be processed with any other RAW conversion program including ACR, DPP, or BreezeBrowser. If the file is marked as read only before viewing in bridge, the image preview shows corrupt in Bridge but the file remains intact and can be processed with Canon's DPP software. This issue first occured with CS4 and the ACR 5.5 update. The problem seemed to be less prevalent with the ACR 5.7 update. However after upgrading to CS5 this problem is back and worse than ever.
    When doing a detailed file compare between a corrupted version of a CR2 file and  a copy of the same file before the corruption occurs it appears as if metadata has been written to the wrong part of the file (middle) instead of the beginning (header).
    Operating System: Windows 7

    I am trying to fix this problem as well.
    In my case, I've got Windows 7 (32-bit), CS5, and a Canon 50D.
    I've got photos that I can view perfectly in Canon's Digital Photo Professional, but the SAME photo in the SAME directory opens corrupted in Bridge.
    Here's an interesting wrinkle:
    Scenarios:
    (fyi - all my CR2 images are pulled off the CF card using Bridge's loader)
    CR2 Image opened in Canon's Digital Photo Professional:  Opens Fine.
    CR2 Image opened in Photoshop directly (skipping Bridge):  Opens Fine.  (opens in Camera Raw first, of course, but still Fine)
    CR2 Image 'browsed to' in Bridge:  Corrupted pinky/yellow/white.
    CR2 Image double-clicked in Bridge, opens in Camera Raw:  Corrupted pinky/yellow/white.
    Bridge closed.
    CR2 image opened in Photoshop directly again.  Pay attention... opens 1st in Camera Raw: Corrupted, but for only five seconds! It refreshes on its own and now is Fine!  Click Open Image into Photoshop and it Opens Fine again.
    It's clear to me Bridge/Adobe something is corrupting these images.
    It seems sometimes that the corruption becomes permanent, and even Canon's Digital Photo Professional shows a corrupted image.  In the scenarios and order mentioned above, the CR2 file remains openable fine in Digital Photo Professional.  So, why other images I have cannot open well in Digital Photo Professional, I do not know -- perhaps the order I clicked things caused Bridge to update the CR2 file?
    I'm in the process of updating all CS5 software to the latest, in case I'm missing some updates.  If anything improves as a result, I'll update here.
    ]{evin

  • IPhoto '08- can't see photo files for back up

    I had upgraded to iLife '08. I usually back up current photo files to an external drive by going in iPhoto folder in users, select the new photos by folder and drag into my back up drive. Now I click on the iPhoto '08 icon and it acts like an application and opens iPhoto. Are the files now invisible? I don't think I like that! Am I to forced to export for back up?

    There are three ways (at least) to get files from the iPhoto Window.
    1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. If you're willing to risk database corruption, you can restore the older functionality simply by right clicking on the iPhoto Library and choosing 'Show Package Contents'. Then simply make an alias to the folders you require and put that alias on the desktop or where ever you want it. Be aware though, that this is a hack and not supported by Apple.
    Perhaps your best bet, though, is to use a Back Up utility such as DejaVu or Chronosync which can do incremental back ups and can parse the iPhoto Package File.
    Regards
    TD

  • Events folders display photo that is not the actual photo file

    When I open an event file, the photos displayed are not the actual photos. For instance, in the event "Graduation," I now have random photos of my daugher's dance recital displayed, but when I open them, the photos are indeed of graduation. So, I can't see what photos are in an event until I open each photo file There is no rhyme or reason to what photos randomly pop up on the surface, and it doesn't happen with all the files within an event, just some. Please tell me someone else has had a similar problem as it is making me feel a bit batty!

    Welcome to the Apple Discussions. Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • ScanCafe jpeg photo file unrecognized format in iPhoto, not Preview

    I just received 3 DVDs of 1700 image files from ScanCafe.  Unfortunately, almost every photo file, in JPEG format, fails to import (about 30 of 630 on the first DVD).  Of 25 folders of photos on the first DVD, 2 folders did transfer.  I get a pop up after the files(s) try to import saying "the following files could not be imported.  The file is in an unrecognized format."  It then lists the files if I tried to import a folder or a selection of several within a folder, or the single file if I tried doing one at a time.
    The files have long names such as: 00050_p_r13afjqhgrj0119.jpg.  This one didn't import.  This one did though: bn_r13afjqhgrj1653.jpg
    Importantly, all photos will open if double clicked in Preview.
    I've tried dragging single photos or folders into iPhoto.  I've tried using the import to Library command, selecting both single photos or folders.
    Within a folder that didn't tranfer, I found one or two photos that would transfer.
    I tried using a different DVD from Scan Cafe from this order on a different Mac with the same software versions (10.9.2, iPhoto 9.5.1), and got the same error.
    I tried downloading the photo files directly from ScanCafe, and I get the same unrecognized format error.   These photo files also will open in Preview.
    I researched this on the internet and found nothing, then talked to ScanCafe and they didn't know what to do besides send another set of disks (at that point I had not tried downloading the photos directly from them, and this obviously won't fix the problem).
    So, the files must not be totally corrupt as Preview opens all of the photos.
    Thanks for your consideration and recommendations.
    Justin

    Try the following on one or two image files:
    1 - download and unzip Convert to JPG and Embed sRGB.zip
    2 - drag the selected image files onto the app.
    3 - try to import the converted files into iPhoto.
    OT

  • Photo file numbers - duplicates

    Hi,
    My digital camera can take 9999 photos. I have just this week taken more than that this year and the camera started over with numbering the files (0001, 0002 etc.) When I put these into iphoto will it over write the photo files I took earlier in the year that now have the same file numbers?
    Thanks

    wojopaul:
    No, they won't be overwritten. iPhoto will put them into folders based on the date to correspond to the Events preferences you've set up. If two photos are added to the same event iPhoto will append a "_2" to the file name as it moves it to the folder.
    However, you can run into problems if you try to export a number of photos that end up having the same file name (but not in the same event). In those cases you should rename the photos with the Batch Change option and export with the option to use the title instead of the file name.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • LR corrupting my Raw Files

    I've read the other discussions but haven't really seen an answer yet and the typical responses don't seem to apply to my situation.  Here is my situation:
    I'm am getting corrupted RAW files after importing into LR.  Typically this is blamed on Hardware issues but I don't think that is the case for me.  I am getting 1 corrupt file per 100 or so imported.    I've had it happen using different CF cards.  And the file doesn't seem to be corrupt on transfering to my hard drive.  I'm using a Canon 40D.  Using Lightroom 3.2 64bit.  I shoot in RAW.  Here is my work flow.
    I import the photos to my external hard drive via the camera.
    I then back up the originals before importing into Lightroom by burning them to back up discs.
    I then import them into Lightroom from their location.
    Upon initial look everything is fine but when you actually select an image and the preview is fully rendered you can see the corrupt image.  Usually a white rectangle in the bottom right side the image.  Sometimes you get the yellow and pink streaking in that same area as well.
    In trying to open the original file from my hard drive using just my basic Canon Digital Photo Proffesional after it was imported into LR it also states that the image is corrupted. 
    Now if I get out my back up disc and copy that image to my desktop and open it in Canon Digital Photo Proffesional it opens it without problem.  There is no corruption.  So the file that I backed up from my hardrive shows no corruption.  I think the original file is fine.
    I then copied the image from my desktop to the original folder on my external hardrive overwriting it.  The image in lightroom is now fine.  There is no corruption.
    Process of elimination leads me to believe that the corruption happens on importing into Lightroom.  It isn't my cards (different cards same problem).  It isn't my external hardrive as the file copied from that drive is fine.  It seems random especially being that I can overwrite the file with the same file and then it is fine.
    I really hope this problem is sovled quickly.  This to me is a BIG deal.  Any other ideas?

    Thanks, I'll think I'll go ahead and invest in a new hard drive.
    I know about the jpeg preview thing.  The corruption doesn't show until you attempt until it renders the image at full size pulling from the raw.  I know it isn't a display thing as exporting the raw to a jpeg still shows the corruption.  The file is corrupted and attempting to open it with other programs shows the corruption.  It seems odd that the corruption doesn't happen when being placed on the hard drive from my camera as my back up shows no corruption.  The corruption is happening at a later point.  Would an image start out fine on a hard drive and then end up corrupting apart from any program changing it?

  • Severe corruption of .MOV files in Lightroom & unusable processing speed

    Hi all,
    I run on an Intel i7 quad core, 12 GB Ram, 2 GB Graphics Card (nvidia), Raid 0, 2x512 GB Harddisk space (1 TB), Windows Vista 64bit using the latest cut of Lightroom 3.4.1 64bit.
    Using a Canon 7D with latest firmware updates, for RAW/JPG/MOV - this is the only source of all files that I currently use in Lightroom.
    First Question regarding corruption of .MOV files:
    Once I copy my files over from the camera onto my computer, I can play all .MOV files seemlessly with no flaws or hiccups (using multiple movie players), after I import the files in the directory (this includes the .JPG's, .RAW's, and .MOV's) into Lightroom, my .MOV files no longer play on my computer, the files begin to stutter and jolt, and are completely unusable. You can imagine my frustration as I've only recently added a huge chunk of my files to be cataloged by Lightroom, resulting in the last years worth of .MOV files being corrupted and ruined.
    I am wondering if anyone has had this issue before and if they've found a way to fix it? I understand I could simply un-tick the import of .MOV files (and do so from now on), but I find it baffling that Lightroom is ruining the .MOV files - as it's not actually meant to touch the original files themselves is it? It's meant to add it's own layer of things to do to that file, stored in its own catalogue never meant to actually change the original files themselves.
    Second question regarding unusable processing speed:
    When DEVELOPing in Lightroom (I develop on two 24" monitors, both displaying at 1920x1200) it can take anywhere between 10-20 seconds for what I'm actually doing to take effect, ie. spot removal or changing the noise levels of a photo. My catalog currently has 10438 photos in it - is this overwhelming for Lightroom?
    I love Lightroom and its functionality - when I first started using it these problems didn't seem to exist, so I'm unaware if it's an update or if it's just the increase in photos it has catalog'd that're bogging it down. I would love to resolve these matters as Lightroom is definitely where I want to be.
    regards,
    Emilio

    Thanks for your response,
    After what you said, in having absolutely no issue with .MOV files, I decided to ensure every drive on my computer was up-to-date and all software packages were final cut versions.
    When I started playing my .MOV files (using VLC version 1.1.10 as standard), the files played fine after a graphics card update/VLC update/Windows system update/computer reboot (Lightroom NOT loaded) - So you are absolutely right, Lightroom is NOT in any way affecting my original .MOV Files, however:
    When I then loaded Lightroom up, and started to then play my .MOV files (whilst Lightroom was running, and still using VLC (standard default player) (no other packages loaded), the files would begin to jolt/jitter/ struggle to play again.
    If I monitor Task manager/Resources the only noticable heavy usage on Lightroom is having dedicated itself 1.7 GB of memory (not that much considering 12 GB is available), but also that clicking on any picture (whilst in grid-view, showing .CR2+.JPG as one, second monitor showing preview image) all of my 8 CPU's would spike to 90-100% for a second or so then drop down - fair enough.
    I then close Lightroom and my .MOV files still don't play accurately - after a while (approx 30 minutes) my .MOV files will play seemlessly fine again.
    So, I stand corrected that Lightroom is, in fact, NOT corrupting my files and regret my title choice, but is Lightroom doing something to my system which is making it hang/struggle whilst Lightroom seems to flush/go through its buffer?
    Also what import preview do you set your catalog to? 1:1 then wait for it to complete the full import or standard?
    Another major issue I'm having is when exporting multiple files (200+ or so), I notice the exporting process is fast initially then dramatically slows down my whole computer as all my RAM (the full 12 GB's) gets sucked up - after 60 or so photo exports Lightroom would have used the full 12 GB Ram I have available, and stopping the export does NOT free up the Ram - I need to completely close Lightroom (which then frees up the used RAM).
    Thanks in advanced

  • Corrupt or lost file

    When printing a series of four photos each on letter size photo paper I hit one group of four that would not print and gave me the message that one of the JPG images "either cannot be located or is corrupt." Is there a way to determine whether there are corrupt or missing files in an Event folder before attempting to print copies or burn a CD or DVD?

    Because it says it's incompatible when it can't be, I got hope. I get error messages all the time with my iPod and iPhone that it cannot sync and that 'this device is not capapble of connecting to iTunes' stuff. I literally forget that happened, plug it in again and it works, I later realize that iTunes made a mistake, they do that.

  • ? Corrupted Library6.iPhoto file?

    I updated iPhoto to 7.1.2 a few days ago. On opening iPhoto the next AM I noticed that all my pictures from summer 2006 to present are missing when running iPhoto; those before summer 2006 remain. It was a few days since I had looked at pictures before the upgrade. Fortunately, all my pictures appear to be in the correct place and are viewable with Preview when I click on the photo file (user/Pictures/iPhoto Library/) on the internal hard drive. Whew!
    I've reviewed the forum for the last 2 hours and assume that I have a corrupted database file. Not sure if it is the Library6.iPhoto file or albumData.xml file. I have tried copying both of these from my SuperSuper backup volume (done last Sunday evening automatically before I knew I had a problem) on my external hard drive without correction of the problem. Should I also try to copy over the Library.iPhoto file? I didn't see this recommended elsewhere.
    Prior posts recommended copying over the Library6.iPhoto file if a backup was available, and if no improvement, to rebuild the library using iPhoto Library Manager. Before jumping into this, I want to make sure that is what others would recommend. I've got the program downloaded and see the command to rebuild. It will save the new library as "rebuilt library" in the pictures folder. Is this my best action?
    If I rebuild, shouId I then throw away my old "iPhoto Library", then change the name of the rebuilt library to "iPhoto Library"?
    What are the ramifications of rebuilding the library? Although I have a lot of albums, I only have a couple slideshows, only 1 web gallery item, and no cards. I assume I'll have to rename events; no big deal.
    I am a little surprised rebuilding the library is not built into iPhoto somewhere. Good thing someone wrote a program.
    Given this corrupted file, should I be checking my drive for other problems? Permissions are correct and the disk verified fine with disk utility.
    Thanks,
    Justin

    jcgraff
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums back.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Regards
    TD

  • Missing Horizontal Photo Files - Thumbnails visible

    I was going back through my iPhoto Library and came across a strange issue. It appears that a vast majority of my horizontal photo files are missing starting in July of this year and going back to 2005. The thumbnails show up but when I doubleclick I get the dreaded exclamation point. When I search for the file, it is not on the harddrive. Fortunately I have a backup from August that appears to have the pictures in it, I started using a Time Capsule in September and it only has the corrupt library on it.
    1. How do I get these pictures back, where did they go?
    2. How do I restore from the backup harddrive? I cannot go through thousands of pictures, write down the file name and restore them one by one?
    3. Doesn't this seem odd that the files for the vertically aligned photos are OK?
    4. This is extremely disconcerting, ie what else is missing?

    sareddie
    Your files should be perfectly safe...
    iPhoto (like iTunes) is a database but unlike most databases which hide the data away from the file system, it stores the data in plain sight. So rebuilding works on the files that track the pictures, rather than on the pictures themselves.
    Here's how the iPhoto Library Folder is structured: In this folder there are various files, which are the Library itself and some ancillary files. Then you have three folders
    Originals are the photos as they were downloaded from your camera or scanner.
    (ii) Modified contains edited pics, shots that you have cropped, rotated or changed in any way.
    This allows the Photos -> Revert to Original command - very useful if you don't like the changes you've made.
    (iii) Data holds the thumbnails the the app needs to show you the photos in the iPhoto Window.
    So that explains why the Modified Version of a pic is present, but begs a question... where have your missing pics gone? And how did they get there?
    Rebuilding a database would try to recreate the link between the thumbnail in the iPhoto Window and the file, but if the file is missing, it obviously cannot do it.
    Is there any possibility that you - or another user - might had accidently deleted or moved these files? Are they in your trash? If you have a file name try Spotlight for them.
    Regards
    TD

Maybe you are looking for

  • Aterm refuses to be transparent

    I know I post here a lot, but I'm still a newbie, so here's the problem: i installed fluxbox-devel with aterm. i set all the settings in .Xdefaults according to this and i always get the black screen with white text. even running aterm -tr -trsp -sh

  • PowerBook 17"G4 1.67GHZ replacing HD

    I've purchased a new Western Digital 250G HD from OWC and I have the iFixit installation printed and I;;m ready to begin. Question, I've got TimeMachine backing up to my TimeCapsule but before I begin the swap out will TM sync properly from TC and pu

  • Automated Solution for Exporting SQL used in Crystal Reports

    My company has created over 400 reports that are running on Crystal Reports XI. Due to proposed changes in our database, we occasionally need to review the SQL statements of all 400+ reports to determine if any of them would be impacted by the propos

  • Pls Advice me  on Exception code.

    Dear All, Need to know what is making the exception code 20 show up in the two open purchase orders.  The exception code is causing MRP to create requisition to order additional stock when we are already above MAX. TIA Kogi

  • IGrid Issue in 12.1 SP 9

    Hi Experts, We are facing the following issue in 12.1,SP 9. When we are trying to display an iGrid having columnlights to show various statuses,we get an output with only the status field coming fine but the other columns coming as black lights inste