Cost Center Errors for new Account Assignment "P"

Hi Friends ,
We are implement PS for our client , and we are facing some issues with Cost Centers when trying to creating a PO with reference to a PR with the new account assignement "P" -Project .
Currently our client is using "K" as account assignment for the doc type which we are using above . The error we get is "Please use cost center 400100 not cost centeru201D. And we get this error randomly , and doesn't seem to occur for all the plants .
Has anyone come across some thing like this ?
Please let me know if you need any additional details .
Thank you ,

I feel that your message type ZX000 is custom message. you have to take inputs from your ABAP that in which situation this type of error comes perticularly debuggin scenario.
Virendra sir, please add on.
Regards
Nitin

Similar Messages

Cost Distribution in Shopping Cart for different account assignment type

Hi friends,
We are at SRM Server 5.5 at level SAPKIBKT07. Business scenario is extended classic.
User is creating a shopping cart with single line item and distributing the cost to multiple account assignments (say Cost Center and Order). Shopping cart has a valid source of supply. System creates a PO in SRM and tryu2019s to replicate the PO in ECC backend, however fails to replicate.
My understanding is that in ECC backend it is not possible to combine two different account assignments while distributing cost at item details.
Solution would be to create separate line items for different account assignments (distribute between similar account assignments).
Is my understanding right?
Thanking you in advance,
Sandeep

Sreedhar,
Thanks for your update.
I am also MM consultant, so as far as MM goes we can only maintain one account assignment type per line item. In MM we have provision of multiple account assignment but it works only for single account assignment type per line item. Which means if account assignment is "k" then we can split between multiple cost centers, but we cannot split between cost center and WBS element in one line item.
You said it is possible to split between multiple account assignments in one line item. Will it be possible for you to try at your end and let me know how PO/PR are created in backend?
Sandeep

How to maintain default cost center at House Bank Account level for Bank charges

Hello All - We have 4 Bank accounts and all of them are assigned to the same transaction type.
As of now, we have OKB9 set up maintained for Bank charges at Co Cd level and it is posted to the same GL A/c.
Now, My requirement is that I need to have different Cost center maintained for 2 of the 4 House Bank Accounts.
Can you pls let me know if any possibility.
Thanks

Interesting requirement. This can be achieved through Search String as suggested by Mr. Shanid.
Try to find a text in the note to payee line for bank charges for creating a search string.
For Example. See below note to payee line and assume this line for bank charges.
16,455,130155,0,5/3 BANKCARD SYS CH,,5/3 BANKCARD SYS CHARGBACKS.
Identify a text which should always come with this line for every EBS file for bank charges. Assume here "BANKCARD".
Now go to T-code OTPM.
Click on create
Srch strg name: Bank Charges
Description: Bank Charges
Search String: BANKCARD ( Based on this text system will search your not to payee line)
Once you press enter, you will get mapping details on the left side with target field "BANKCARD". Now remove the BANKCARD from target field and put there cost center which you will post for one house bank. Save the data.
Now move to second step.
Click on Search String Use.
Put your company code,
House bank(mandatroy in your case).
Interpretation Algorithm( same as you maintained in OT83 for posting rule with external transaction type).
Search String: BANKCARD.
Target Field: Cost Center.
Save.
Sorry I am not getting option to attach screenshot in SCN now. Dont know why.
Let us know if you have any doubts.
Hi Mr. Shanid,
Correct me if I am wrong.
Regards,
Mohammed

PM Error Message " FM Account assignment is incomplete (Funds center) messa

Dear PM Experts.
We use PM module for both Preventive maintenance and Breakdown maintenace.
While creating an breakdown maintenance order, the system gives me an error message: " FM Account assignment is incomplete (Funds center), error message number FI135";
As a result i cant release the order for further processing.
Kindly help me to resolve this.
Thanks in advance.
Richard.

Hi
Try below it may solve your problem .
1. Go To Change Order (IW32)
2. form the Menu Path --- GOTO -- Assignments -- Fund Management
3. Either your Fund center field will be blank there or the Fund Center available there is no more Valid now .
4. Get the correct Fund Center from commercial & Enter there --- Save the Order & Release it .
Regards
Sameer

New account assignment category for GR Non Valuated

Hi Friends,
I want to make a New account assignment category for GR Non Valuated. I created the same in SPROMMPurchasingAccount assignmentMaintain account assignment categories.
I selected followig:
AA Changeable at IR - X
Consumption account -V
Acct modification- VBR
ID: AcctAssgt Scrn- 1
Distribution - 1
Partial invoice- 2
GR- Non Valuated - X
GR non Valuated. Frim - X
After this When I am trying to create a PO with above made Account assgn cat. it is giving a Error that
"With non-valuated GR, please also enter GR indicator"
When I am clicking on GR indicator in Delivery tab, it also selects GR-Based IV in Invoice tab.
I want to have GR to be selected automatically in Delivery tab & GR- Based IV not to select in Invoice tab.
How to do this ?
Regards,
Sai Krishna

Hi ,
In this case you may not enter the account modifier VBR . See as there is no GR posting you don't need it . But it is useful to determine the account in PO. For example if you maintain account modifier in your account assignment category you need not to enter the G/L account at the time of creating PO in account assignmnet Tab. If will be automatically picked . But if you are not maintaining the account modifier in account assignmnet category then you have to enter the account manually .
So choice is yours whether you need an account modifier or not depending on your scenario.
regards,
Anupam

SRM - creation of new account assignment

Hello,
I just created a new account assignment that combines an asset and a cost center.
My client wants to be able to purchase products as a asset and use the cost center to the workflow approval of the shopping cart.
The customizing I did in MM was:
The same customizing was done for item category O, G and P.
The customizing I did in SRM was:
I also added the attribute Asset/Cost center in account assignment in PPOMA for my user.
Two questions:
1 - When using this new account assignment, the button to create a new asset is not showing. Is it only possible to create new assets if you choose account assignment asset?
2 - When using this new account assignment, no documents were created(purchase order). I got the error message Process schema not found.
Did I miss any step in the customizing?
Do I need to do something else when creating a new account assignment?
Thanks in advance!
Best regards,
Karin

Hi Karin,
Did you do the following set up / security role assignment Assigning to Assets - Account Assignment - SAP Library as mentioned in the above link.
Please do the same you should able to see Create Asset button.
Thank you
Ritesh

Unable to locate Co data for co account assignment in EK02

Hi,
While creating entries in EK02 we are getting below error:-
"The system was unable to locate CO data for CO account assignment key XXXX". We are using profit center and segment reporting " and have maintained the necessary settings in "Define CO Account Assignment Keys" against company code , segment and profit center and also maintained cost element settings.
Any solution to resolve this error.
Thanks and Regards
Kumar

Hi Kumar,
Below are the configurations required in this regard.
1. maintain GL account and const element - FS00. You can check whether the GL maintained as P/L GL.
2. maintain the cost centre - KS01/02/03. Please verify all the details whether or not have been maintained correctly.
3. maintain EK01 (if required).
4. maintain EK02 - please double check whetheryou have CO account assignment 'X' in there.
5. maintain CO account assignemnt key in SPRO - Check whether correct cost centre is maintained against correct CoCd.
This would suffice.
Please let me know if you're stil facing the issue.
Thanks
Bodhisattwa

Display descriptions of cost center and G/L account in ME51N/ME52N/ME53N

Hi Experts,
Can any one suggest that how to display descriptions of cost center and G/L account in account assignment subscreen- ME51N / ME52N / ME53N.
Thanks in Advance...
Siva

hi
if the field is required then u have to enter them manually
so if this are not required then goto OKB9 here give the default cost center for the Gl acct

Cost center planning for overhead calculation

Gurus,
I have a doubt regarding the cost center planning for overhead calculation.
My scenario is:
There is a service cost center from which a certain percentage I want to allocate to the products as overhead. Now while doing so I have created a cost center and a cost element of type 43 (internal activity allocation). This cost element is the base for overhead calculation. Also I have created one cost element of type 41 (overhead rates). I have defined the credit (of cost sheet) with the cost element of type 41 and the cost center as mentioned.
Now I am facing a problem while planning the cost center with cost element type 43 through KP06.The system is throwing the error message: 'Cost element xxxx can only be used for activity input'. My understanding is we must carry out the planning for the cost center to allocate a certain percentage to the product cost estimate. If I am not allowed to use the cost element of type 43 to plan, what should I use for the planning?
Request your suggestion.
Thanks in advance!
Snigdho.

Hi
Since you mentioned catg 43 cost element, I thought you are using Activuty Type
To apply overhead on the product during CK11N, you need not plan any value on the cost center... The values planned in the cost center can not be used as a BASE in your costing sheet....
It goes like this
1. Your cost estimate has BOM + Routing
2. So, the cost elements that you would see during CK11N, can be broadly classified into 3 types
a. Primary cost ele - Material Consumption accounts for BOM components
b. Secondary cost ele (Catg 43) - If you use any actvity type in the routing
c. Secondary cost ele (Catg 41) - These cost elements are parasites... They need some basis to calculate the overhead value... That basis can be either the (a) or (b) above.....
I think, what you are planning to do is Plan Primary cost ele in a cost center and trying to use the same as the Basis.. That wont work!
What you need to do is
a. PLan the values in the cost center, say, 100,000 USD
b. Absorb it on the basis of 2.a or 2.b
If 2.b is not applicable in your case, since you are not using activity types, then 2.a is the Only option left for you
Hope it is clear....
Regards
Ajay M

Settlement to cost center posted for statistical WBS element

We have the following scenario
Statistical WBS elements with assigned Cost center posted for actual postings
Network assigned to statistical WBSE and settlement rule on the same WBSE
On settlement run CJ88 the network costs are transferred from network to Cost Center posted in the WBSE.
Issue:
While analysing the active availability control the assigned value is doubled. This happens only of the networks are settled. System considers the Actual values from network + Statistical value from WBSE to caculate the assigned values.
Simulation details as under.
SP-SET-02-3 (wbs element)
    COSS 2011 11 0007101000     0001240704 KOAO D INR                 100.00 INR
    NWA 500000002408 0010
        COSS 2011 04 0007101000     0001240704 KOAO O INR                 100.00- INR   S -- does not contribute to assigned value
        COSP 2011 04 0007101000     0001240704 COIN D INR                 100.00 INR
        COSP 2011 01 0007101000     0001240704 KPPP D INR                 100.00 INR   M   -- does not contribute to assigned value
Hence the assigned value gets doubled and eating up the budget.
Anyone encountered similar issues pls share the possible solutions.

Hi Mohit
It is against SCN's rules to post the same discussion thread twice. You have already posted a similar question in the below thread. Please refrain from doing this and close one of the threads.
Initial balance upload of revenue GL accounts with wbs
Regards
Sowmya

Cost center missing for pers. no

Hi,
While prosting exps in TC: TRIP, we are getting the error "Cost center missing for pers. no". After analyzation the issue we came to know that there is no relationship with org. assignment. We went to TC: PO13>give position>select relationship-->click on create infotype. Here we have given relationship A 011and click on save and again save. Now, we went to TC: PA20/30 cost center is appearing correctly.
We have couple of pers nos. Instead of doing manuallthis we are doing executing program RHINTE30 in TC: SE38. But it is not updating cost center in TC: PA20/30. How should i achieve this issue? Pls advice....

you are correct RHINTE30 report will update Cost Center in IT 0001 from OM. Before that you have to upload CC to position through T.code P013 using either LSMW / BDC.
For updating CC in IT 0001 process is below.
First Create Cost center to position using P013 t.code and relation ship A 011.
Excutre report RHINTE30 using T.code SE38.
After that there will be one batch input session created in SM35.
Finally Select your batch input session and Excute through SM35
Then CC will be updated in IT 0001.
If there are no much employees you can manull create CC directly in P013 and CC will directly upte in IT 0001.

In a sales order, entering the cost center field for line items

In a sales order, the cost center field for the tab 'account assignment' of line items is suppressed. Is there any possibilities to open the cost center field(for line items)?

Hi kim,
You can do this in Account Assignment Catagory..
Hope this helps.
Regards,
Sree

Meaning of error AA449 Auxiliary account assignment to asset not possible

We are having problem posting asset entries created by GJT3 - JVA Asset Retirement. Entries process successfully through cutback GJCB but post of asset entries fails with error AA449 - Auxiliary account assignment to asset not possible.
KOSTL is activated for account assignment via Financial Accounting -> Asset Accounting -> Integration with General Ledger -> Additional Account Assignment Objects -> Activate Account Assignment Objects.
I added KOSTL for all TTypes in Specify Account Assignment Types for Account Assignment Objects (ACSET). This did not fix the problem.
Can anyone help please? I have searched all forums and OSS on error AA449 and have found no solution.
Steve

Hello Steve
I am not currently accessing SAP system, so mentioning specific T codes is difficult.
However, in SAP menu, go to SAP>FI>Asset Acctg>Master records>display
Now when u check the record, you can make out if cost assignments are completed
Now coming to dep area checking, you need to go to IMG > FI>AA>Lean implementation> depreciation area settings.
I amy be wrong, but pls recheck
assign pts if useful

Cost Center and G/L Account not defaulting

Hi Experts,
We are on SRM 7/ECC6
I am creating a free text SC...I give the product category and expect that cost center and G/L account will default in the account assignments tab, but they don't and I have to manually plug in these values. I have maintained appropriate SPRO settings where I have linked my product category and G/L account and also marked the default checkbox.
Kindly suggest,
Best Regards,
John

Hello John,
In SPRO configuration
"Define G/L Account for Product Category and Account Assignment Category"
Maintain the configuration like
Category ID Source Syst. AcctAssCat G/L Account Default
0000030 TRXCLNT750 CC 15190001 x
Don't forget to maintain Source System and Default fields for this setting.
Regards
Thiago Salvador

GR and GR Non Val indicator in R/3 PO for multiple account assigned SC's

Hi,
We are on SRM 3.0(EBP 4.0) and R/3 4.7.
We have implemented the BBP_CREATE_PO_BACK badi for setting or clearing the GR and IR indicators under certian conditions.
But for Multiple account assigned SC's we get an error message "06181 With non-valuated GR, please also enter GR i ndicator ".
We have tried implementing note# 872000, but this has not solved the issue.
The PO's get created only if we force the GR indicator when transferring the data into R/3.
It seems clear that while creating the PO the system is encountering the GR Non Val indicator but not the GR indicator, so its throwing the error message (we get the same error message when we create the PO from R/3 with GRnon val indicator checked and GR ind unchecked).
The proposed solution is that in the same BADI, along with clearing the GR indicator, we will also clear the GR non val indicator.
This can solve the issue if the indicators are transferred as it is from EBP.
But can anyone tell me if these indicators are also checked/changed in any FM/program in R/3 before the PO is created?
Is there any customizing setting which is affecting this particular behaviour?
Regards,
Srivatsan

Hi Srivatsan ?
In ECC, you have a configuration point :
Materials Management->Account Assignment->Maintain Account Assignment Categories
Here you can untick the indicator you want by account assignment category;
Kind regards,
Yann

Cost Center Errors for new Account Assignment "P"

Similar Messages

Maybe you are looking for