Cost center not populated in Purchase requisition for a third party order

Hello,
We are currently testing the Third party order flow which includes :
1. Creation of a sales order with item category TAS
2. A purchasing contract is maintained for a sales order item at the schedule line level.
(In the purchasing contract, account assignment is already maintained for each contract item, meaning a G/L Account and a cost center).
3. Automatic creation of the Purchase requisition when the sales order is saved.
>> The account assignment is not copied from the contract to the Purchase requisition. Do you know why and how I can do that ?
Thanks
Best regards
Benjamin

Hi Palani,
if i am not wrong This WBS in location or additional tabs are used for settlement purpose. For PR creation by maintenance Orders can have Order number as account assignment.
Please reply
Thanks
Sunil

Similar Messages

MRP creating additional purchase requisitions for the existing sales order

Hi,
We have scenario where we switch materials from POD material to ARP material. POD material is just like make to procurement which creates purchase requisition and purchase order upon saving the sales order. ARP (Auto replenishment) material creates purchase requisition based on sales order and re-order point while running MRP.
When the material is POD title, it created purchase requisition and purchase order (example: 4500000110) while saving the sales order (example: 1000000010) for the quantity 10. After some time this material is switched to ARP and it has open sales order (1000000010) and purchase order (4500000110).
We have special MRP run for ARP materials based on MRP type, which creates purchase requisition.. What is happening is when we run MRP; it is creating new purchase requisition for the old sales order (1000000010) for the quantity 10. But old sales order (1000000010) is already having purchase order (4500000110) to fulfill. So we donu2019t want to create new purchase requisition for the old sales orders. It should create purchase requisition only for new sales orders.
Please advise
Thanks in advance
Srinivas

Mangesh,
If the components are Inhouse production then you can think of using collective orders by assigning special procurement key 52. If raw material exists then your requirement cannot be met..as i think your scenario is of assembly processing. The idea of assembly processing is that component materials will always be available and only assembly will be done based on Sale Order.
Regards,
Prasobh

ABAVN - Cost Center Not populated

Hi,
I am going to post some Asset Retirement entry from ABAVN Tcode. Once I simulate the entry, its not populating Cost Center. I want to post into the Cost Center also.
Please provide me some help how post the entry with the Cost Center.
Thanks

Hi,
Why don`t you go to the Cost Element master record (KA02) of the cost account which your retirement transaction type is addressing. Check in tab Default Acct Assignment, whether there is another account assginment (internal order for example) defaulted for your cost element. Alternatively, you could put the cost center you want as a default for your cost account here.
KR,
Severina

Cost center not committed on shopping cart, for account assign cat "Asset"

Hello,
We are implementing extended classic scenario in SRM 5.0 with ECC 6.0 backend.
While creating a shopping cart in SRM, in the cost assignment tab when we select an account assignment category as Asset", and then try to enter a value in the cost center in the basic details of cost assignment, it is not getting committed to shopping cart screen. The cost center field value is lost when we move to the next screen for ordering the shopping cart. For the asset related purchases, we are using main account assignment category as "asset" and it also requires cost center, because while the asset master record is being created in R/3 for these items,it requires the cost center. We also using internal order. So for the account assignment category "Asset", the other account assignment fields that can be entered are cost center, internal order and one custom field called "project code".
We have created this user-defined field in the cost assignment tab in the shopping cart, purchase order and confirmation documents in SRM in accordance with the OSS note 672960. We have implemented BBP_CUF_BADI_2 & BBP_DOC_CHANGE_BADI, BBP_DOC_CHECK_BADI for the shopping cart object.
Can someone please help me with this issue?
Thanks,
Krupa

thanks Ramakrishna and Yann for your prompt reply..
Ramakrisha,
I know that for assets, SC requires asset number and G/L is automatically derived from the corresponding asset class from the backend. In our case, we are putting dummy asset number in shopping cart and this asset number exists in R/3. But we are not generating asset creation during shopping cart creation but we are doing it during the PO creation in doc change badi. During this asset generation you also need cost center on the asset record. So we have added cost center field for Asset account assignment category and I can see it in the details of account assignment. But when I enter this cost center on shopping cart, it doesnot get committed, it disappears when I order the shopping cart.
Does anybody have any clue why this might be happening?
Thanks,
Krupa

Requirements not passing for third party orders

Hi...I have a problem that I am hopeful there is an answer to. On the SD side we have third party orders that when entered automatically create purchase requisitions. Previously, those requirements were passed through and were visible in MD04.
We are currently in the process of implementing an external planning system (not APO), however, the users made the decision that the 3rd party orders would not be planned or facilitated in the new system. So as I set up the MRP type for external planning I have run into a problem. For some reason I can get all requirements to show in md04 except the third party orders. Standard OR's transfer, and I can see all other details, but the requriement for the third party order will not. the requirements did transfer prior to the change of the MRP type. On the order this has not impacted the schedule line category or the requirement type, so I don't see any reason from that side why they wouldn't transfer.
Any direction on this would be appreciated.
Regards,
Brian

No, the problem is not that requisition isn't created. The problem is that the information is not being displayed in the planning screens. It creates the purchase requisition but you cannot see it in any of the MRP screens. The problem is the visibility in screens like MD04. It is true, that if the PR is created automatically then a requirement had to be transferred, but I also need to be able to see that requirement. Thanks for clarifying.

How to create Credit or Debit Memo for Third party orders

Dear All,
Is it possible to create Credit or Debit Memo for the Third party Orders.
Is there any standard procedure to do that?
Kindly explain.
Regards,
Mullairaja

Hi,
What is the scenario, why you want to create Cr/ Dr memo?
Any credit / Debits memo to the Customer, SAP have provided the standard functionality which can be used across the different types of sales.
- but if you are looking for issue Credit / Debit memo to the vendor which can be done using Tx: FB60
Regards,
Reazuddin MD

Unit Cost is not Populating in Sales Order Line Level for OPM Enabled Org

Dear All,
This is to inform you that Unit Cost is not populating in Sales Order Lines. Ideally it should pick from OPM financials, but whenever i am running Cost Update it is throwing error. We need to pull out Unit Cost for Sales Analysis Report. Please suggest on the same ASAP. What are the steps needs be followed to populate the Unit Cost. Please suggest.
Thanks & Regards,
Patrick

Hi
I think it will pick from PRICE list. Why don't to you try by keeping this item in the mentioned Price list.
Regards
Raj

Cost Center in populating in GR/IR Clearing Account at MIRO Posting

Hi,
I am working in 4.7 EE version. We created one Service Order(purchase order) and gave account assignment as Cost Center and Business area. Then we created service entry sheet wrt to service order and accepted the service enry sheet. System automatically created MIGO document in back end. At the time of posting Invoice Verification wrt service entryshee/service order (purchaseorder), system is populating cost center in GR/IR clearing account.
Give me some idea how the cost center is populating in Balance Sheet GL A/c (GR/IR Clearing A/c).
Regards
Sudhakar

hi
i think d havnt tried the tcode i had given
it is to attach the cost element account to the costcenter
it is understandable for a sap consultant that we can`t assign gl account to the cost center
i think u have not tried the solution so plz dont make any comment on any ones experiance
ur required help and i tried to help u
this is not the way to talk with anyone
use ur own logic before asking questions and also replying for answers
sorry for helping u
kunal

Purchase requisition for service activity / element cannot be generated

Dear SAP MM Experts,
This is a service Creation from the PM order to Purchase Sercive Requisition.
The Error Message Is Generated :Purchase requisition for service activity / element cannot be generated
Diagnosis
Due to the system settings, the system is trying to generate a purchase
requisition for a service activity or a service activity element.
No service package has been created for the activity/element.
As a result, the system cannot generate a purchase requisition.
The activity/element is created or released, but the indicator for
generating a purchase requisition is not set.
Create a service package for the activity/element and then generate a
purchase requisition.
regards,
A S

Solved From PM side

Automatic creation of purchase requisition for semi-finished product HALB

Hi Gurus,
We want the MRP to generate automatically a purchase requisition, instead of a planned order, for a semi-finished product. Of course, we still want to be able to convert it to a planned order.
thanks
Jean-Francois Millaire

Hi Jean-Francois Millaire,
You want a purchase requisition after MRP run & you should also able to convert that purchase requisition to planned order,If i understood correctly, hope this is your requirement
First one is possible -in MD01/MD02 maintain create purchase requisition as "1"
Second is not possible,its not possibel to conver a PR(purchase requisition to Planned order where as vice versa is possible
confirm my understanding,pls revert if you differ
Regards,
SVP

Purchase order number not update in purchase requisition status tab

Purchase order is created for purchase requisition. The purchase requisition is triggered through process order. When I checked purchase requisition details in ME53N status tab, status is not edited and purchase order number also not present.
Kindly let me know the possible reason for this.
Appreciate your help..
Thanks,
SAP PQ

If the PO had been created without reference to the PR, it will not be updated in the PR.
If it has been created with reference to the PR, then the PR number gets updated in the PR status.

Purchase Requisition for Order BOM components ?

Dear Members :
Can I generate purchase requisition for Order BOM components from VA01 ? Mine is TAQ - the header itm cat and TAE for sub-items (finished prod) . While navigating within Sales Order and branching to a particular component's shced. line - the pruch req col is blank. The schedule line cat for the sub-item is CT.
Could someone please explain the configuration steps I need to maintain for the above ? What I am expecting is when I save the Sales Order it should create Purch Req for the components which do not have enough stock.
Thanks
Atanu

Hi :
Thanks for your advice. Couple of things :
1. In my system in auto acc assignment, I already have consumption acc under posting key GBB. Now I am getting error in VA01 - which states that "The system was not able to determn a consumption acc for purchase order item with acc assignment" and also suggesting to address "GBB posting key". I made the following changes for CT :
    movt : 101
    order type : NB
    item cat : 0
    acc assignment cat : F/C
2. Obviously SAP is expecting a consumption GL acc, which though is there under GBB-AUF from my existing setup. For generating purch req this is strange becoz I haven't yet gone upto PO generation step nor released the supposed to be Purch Req. for BOM component - and this is before I save the Sales Order .
3. In spro->acc grouping for mov type; I don't see the following combination in SAP ie,
101(MvT) - B (MvT) - GBB (TEKey) - AUF. I need B instead of F which is already there and is for production order but the BOM comp has to be for PO but the combination is not there.
Do you think this could be the reason that SAP couldn't find the GL acc ?
4. Also my purpose was not just to raise a purch req every time the sales order is created for the BOM components - only if there is shortage in stock - but then again for CT once I assign the above, it doesn't allow to check the boxes like Availbility , Requrmnt etc. (??)
Am I clear and could you please suggest me what I am missing or doing wrong ? What movement type do you siggest to enter in CT fields.
Thanks so much for your time.
Atanu

MRP - Single Purchase requisition for multiple Items

Hi
We have recently introduced MRP module in SAP .In some specific scaeanrios , we want to create a single Purchase Requisition for multiple items .Standard SAP generate different Purchase requisition for each item
Is there any way out

Sandeep,
This topic has been covered numerous times in this forum and in the MM forum. You evidently have not used the search feature. There are thousands of posts in these forums, and the search function will be very helpful for you in future questions.
To answer your question, No, nothing is available to make standard SAP MRP create Purchase requisitions for multiple items.
Most companies address this issue during the conversion of Purchase Requisitions to Purchase orders. During this process, you can add many items to a single purchase order.
Rgds,
DB49

Purchase requisitions for raw materials

Iam having multilevel BOM and when I do Sales order MRP then Iam getting planned order for Semi finished items but not getting Purchase requisitions for raw materials.

Hi,
Planing File Entry :-
The planning file is used to limit the scope of the planning run for the
total planning run. For this purpose, all materials that have been
assigned a valid MRP type are automatically entered in the planning
file.
System will check the Planing file entry only in the case of Total MRP (MD01) or Total MPS (MD40).
While there is no need in the case of MD02,MD03,MD41,MD42,MD50.
Now how this Planing File entry activates,
- Once MRP is activated at Plant level (T.code OMDU)system automatically maintains entry in Planning file for all those materials which contains the Active MRP type.
- So if materials which are created before this activation of MRP in that case you have to maintain this planing file entry manual.You can do this either by MD20 or by using Back Ground Jon OMD0.
Regards,
Dhaval

Hide/Suppress Cost center field in MIGO and MB1A for movement types 551&552

Hi All,
Can anybody tell me how to suppress or hide the cost center field in MIGO or MB1A for movement types 551 and 552?
I did below settings and it worked fine for only MB1A and for MIGO still it is showing cost center field.
IMG > Materials Management > Inventory Management and Physical Inventory >Goods Issue/Transfer posting > Define screen layout > select movement type to change the option.
Also I did gothrough the settings for Enjoy transaction (MIGO) there we have only option to make fields either "Required entry" or "Optional entry" and we don't have an option to hide/suppress.
Please advise or help me .
Thanks in advance!
Regards,
Praveen

Hi
The cost center field is a required field in mvt type 551 as you are scrapping materials, some cost center will need to take the cost of this operation.
Anyway, you first need to make the field as optional for example, before you move.
One option is that you create a screen variant in Tcode SHD0 for MB1A, where 551 is setup as constant (with content) , and mark Cost center as invisible and assign this screen variant to a transaction in SE93.
regards
Sidi

Cost center not populated in Purchase requisition for a third party order

Similar Messages

Maybe you are looking for