Cost Items and Time Schedules in T&EM

I have created certain Cost Items and Time Schedules in Development Server. Transferred them to Testing. But I am unable to edit them or included new ones through tcodes in Testing Server.
But my client wants to edit them or include new ones according to his requirements. How is this possible?
Points assured!
Thanks in advance.
Nivedita.

Hi ,
You have to do the changes in the Developement client and then you have to move the changes to the Quality client. Hope this will solve your prob...
Regards,
Sri..

Similar Messages

  • Delivery block on the line item and on schedule line

    why are there two delivery block on the line item and on schedule line  respectively in the sales order? which one is exactly used for blocking delivery order from creating ? thank you very much!

    Hi
    The reason being, each line item can have more than one schedule line. If the line item has only one schedule line, the block at item level or SchLine level gives the same result. If the line item has two schedule lines, and if you want to block only specific delivery(one among the two schedule lines) the block at item level blocks both the deliveries and if you use delivery block at schedule line level, you can block only the required scheduled delivery.
    Thanks,
    Ravi

  • Use of work shifts and time schedules if there is no attendance capturing

    hi all
    what is the need for creating work shifts and time schedules , if there is no attendance capturing sysgtem in  time management.Its quite necessary and hopes yours answer asap.
    M Swadhin

    Hi
    Thanks for your reply. further i want to say :
    My client requirement is In time and out time maintaining in Negative time management. Is it possible ? ? ? ?
    can we maintain in time and out time in negative time mgt through some external devices or any other way.
    your reply would be appreciable.
    thanks
    Swadhin

  • Project Planning and time scheduling

    Hi Experts,
    Can you please tell me the basic major consideration involved in doing the Project Planning and time Scheduling...
    Thanks
    -Sid
    "Max Points On  Most Accurate Answers"

    HI Sid,
    Look at the below links
    http://www6.sap.com/businessmaps/2583AC927FFD42CD8744082FA42228E6.htm
    http://help.sap.com/saphelp_ppm400/helpdata/en/02/4b1a417c4bf423e10000000a155106/content.htm
    Regards
    Sudheer

  • Doubts - PCP/PCPS - Personnel Cost Planning and Simulation

    Hi gurus,
    How are you? I hope you are very well.
    Currently I'm working in PCP and Simulation implementation project. Actually, in our case, the client is using the old component PCP and would like to implementing the new one.
    Basically, we have the following scenario here: They have two tables for store some premisses (T511K and P) and, before the scheduled period for PCP execution, they run a simulated Payroll in order to generate calculated values for the future, it means, the values from payroll are calculated for the next year and the payroll rules uses these mentioned tables to change the values in specific months of the next year. Confused? I agree, but it can become worst...
    After this execution, the calculated data are stored in logical DB PCL5 and can be used by PCP process. According the payroll responsable told me, each wage type will be associated automaticlly(How???) in a cost item and these meintioned cost items are used during the PCP running. In this current version of PCP, they do not use values associated to Organizational Elements, but they would like to use this from now on although they do not use infotypes 1005 or 1015.
    So, I have a lot of doubts related to two specific points:
    - Wage Types x Cost Itens: Could I keep all the current cost itens without associate each of these to a simbolic account? Is this association mandatory or can I create cost itens just collecting data from PCL5, for example? Does exists any standard collector for PCL5? If I need to create new simbolic accounts specifics for PCP, how can I do this in order to the real payroll do not be affected by these changes?
    - Organizational Elements: Wich infotypes are mandatory? Are there any kind of collector that uses an occupied position as a template for a vacant position, I mean, can I use a hold position to find calculated values for a Person that is associated to this position and populate a similar vacant position? If is it posible, does exists something standard for providing this solution?
    I would appreciate if you could help me. I have been reading many materials from SAP, but unfortunally these practical questions was not answered for me yet.
    Best regards,
    Alexandre Ferreira
    SAP HR Consultant

    DONE

  • When logging in into yahoo mail after typing in password Firefox is adding something, login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

    When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

    Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
    Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

  • I can't print an item,and each time I attempt to do so a message reads that the item is either spam

    I can't print an item,and each time I attempt to do so a message reads that the item is either spam or contains a virus.
    What gives?

    What is the format of the item you are attempting to print (via ePrint?)?  Is it a supported format?  See an updated list here.
    Although I am an HP employee, I am speaking for myself and not for HP

  • Link between actual ship date of an item and schedule line in Sales Order

    So, we are developing a custom report that compares actual Ship Date (Goods Issue Document MKPF-BUDAT) and the date the item should've been shipped (Schedule Line Date).
    I am able to link the GI Document to Delivery Document and can then link to Sales Order Number/Item Number.  However, a line item can have multiple schedule lines.  What logic can be put in the mapping so that the correct scheduling line is picked for the GI date to be compared against?
    Example:
    Sales Order 123
    Item 10 Product X - Quantity 10
    Schedule Line 1: 11/15/2014 8 pieces
    Schedule Line 2: 12/15/2014 2 pieces
    Let's say first shipment gets delayed 2 months and ships 1/15/2015
    Due date in report should know to select 11/15/2014 to calculate that shipment was late 60 days
    Any way to link delivery document to a specific schedule line??
    Thanks!!

    Hello,
    Just did similar development for customer report. List of deliveries based on sales order number and sales order line item numbers. Sort these deliveries either with number or actual goods issue date. Compare goods issue quantity with schedule line quanity and start allocating deliveries to schedule line. For example
    Schedule line 1 - 10 MT, Schedule line 2 - 5 MT. Now you have created 3 delivery. First with 7MT, second with 5MT and third with 3MT. Your first delivery will be for first schedule line. Your second delivery is for first and second schedule line and your thrid delivery will be for second schedule line
    Regards,

  • Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on get info . What am I suppose to change in the setting on getinf

    Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password dialog will open. You’re not going to reset a password.
    In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
    Select your username from the menu labeled Select the user account if it's not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Cost Items in training and event management

    What is the importance of Cost Items in training and events? Can a Core Team Member edit the proposed amounts of Cost Items? How is a cost item relevant to Training and Events?
    Points assured!
    Thank you,
    Nivedita.

    Hi,
    Training and Event Management uses cost items to determine and represent the costs incurred by business events. Cost items are also required when you want to transfer event costs to Cost Accounting, for internal activity allocation for instructors, and for determining a price proposal.
    You store cost items for resources, resource types, business events, and business event types.
    This cost move to relevant for cost centre.
    Like eg: External instructor fee, Resources cost.manual fee, depreciation fee.
    Good luck
    Devi

  • Schedule background Job Programatically at specified date and time

    Hi Everybody,
    how can i schedule a job  in background programatically for a spefic date and time ?
    Thanks and Regards
    srikanta

    Hi Chandrasekhar,
    my requirement is :
    in selection screen there will be two run mode :
    1) Run in Foreground
    2) Run in Background
    If user selects  ' Run in Background ' option , a block will open where user can give
    job schedule date  and
    job schedule time.
    Based on this date and time program will be scheduled in background.
    I have used like this :
    CALL FUNCTION 'JOB_OPEN'
          EXPORTING
            jobname                = v_jname
            SDLSTRTDT              = p_date
            SDLSTRTTM              = p_time
          IMPORTING
            JOBCOUNT               = v_jcnt
         EXCEPTIONS
           CANT_CREATE_JOB        = 1
           INVALID_JOB_DATA       = 2
           JOBNAME_MISSING        = 3
           OTHERS                 = 4.
    where v_jname is jobname
              v_jcnt   is jobcount
              p_date is  schedule date ( taken screen value)
             p_time is  schedule time ( taken screen value)
    but the job is sxcheduling immediately
    Give suggestion.
    Thanks in advance.
    Srikanta

  • A page item on page 'SCHEDULE' at location 34,488 requires rasterization, but is too large to rasterize. Resize it smaller and try again

    I keep getting this error,
    A page item on page 'SCHEDULE' at location 34,488 requires rasterization, but is too large to rasterize. Resize it smaller and try again

    This basically means that there is an object that has its top left corner at x: 34 y: 488 which is too large to be rasterized, it could be due to any large object that is extreme wide or tall.
    Try to check page content and then resize it to verify the behavior. Please let me know how it goes.
    Thanks,
    Sanjit

  • TS1389 I can't transfer purchase item,every time i tune asks me to authorize the PC and when i authorize, i tune says , this is one pc out of your 5 pc. I followed everty step mentioned in this article but still it does not work.

    I can't transfer purchase item,every time i tune asks me to authorize the PC and when i authorize, i tune says , this is one pc out of your 5 pc. I followed everty step mentioned in this article but still it does not work

    I am having the same problem for one song.  I've tried deauthorizing and then authorizing the computer but it doesn't work.  I can play the song on my iPhone and iPad but not my computer.  Any help here would be greatly appreciated.

  • Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers in fbcj

    Hi all ,
    I have a requirement to Post Cash Journal Document using FBCJ tcode.
    Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers
    for exp:
    pk   GL a/c   description       amount   cost center  profit center
    40  400101  telephone exp   500        1403            P 1000
    40  400101  telephone exp    100       1404            P 2000
    50  200100  cash in hand      600-                             
       This is My requirement  is it possible in fbcj
        Please suggest me.ASAP.
    Regards
       Naresh.

    Hi,
      This you can do it in two ways:
    1. Make three header under top level....one Product A, 2nd Product B ( as Billing element) and third as Common expense ( only cost). Now 1st & 2 nd WBS, you have to have sales order linking with individual lint item, for third you will accumulate all the common expense till the period end then make a reposting of the same in desired proportion to both products WBS hierarchy
    (This is if you want to have a track on the common expense as well.......like planning, budgeting & control)
    After this reposting, run RA for individual billing element and hence you will all the complement detailing and control over Revenue and expense with respect to Product A and Product B individually.
    2. If you don't want to maintain that kind of detailing the common expense and keep track of it through project, then have cost centers accordingly and make an assesment/ distribution with respect to expenses accumulated at those cost centers for the period to the respective WBS under each product. Then execute the period end processes for the project.
    Or
    You can try with have two more line items in the costing sheet as an overhead against common expenses with respect each product.
    I hope this should help you.
    Regards
    Avisek Bhardwaj

  • How can display date and time in text item ?

    Hello all,
    I have placed two text items (named text_item1,text_item2).
    I want to place the current date in one text item and place current time in another text item. how can i place this?

    Hi
    This depends on ur needs
    WHEN-NEW-FORM-INSTANCE > if u want to appear it on the very begining moment
    --=============
    u can use
    WHEN-VALIDATE-ITEM > on ur date fields
    Here is a link that may help u decide where to take off with this code...
    http://www.dotnetspider.com/resources/22433-Triggers.aspx
    http://www.slideshare.net/magupta26/oracle-forms-tutorial
    Hope this helps ,
    Regards,
    Abdetu...

Maybe you are looking for