Cost not settled to AUC in last fiscal year

Dear SAP Gurus,
We have some WBSE's for which cost is not settled to AUC in last fiscal year. Now while moving the cost from that WBSE's AUC in Current fiscal year , SAP is not allowing us.
So what will be method to settle the cost from those WBSE's to AUC ?
Thanks & Regards,
Pradip

what type settlement you are processing. whether it is a periodic or full settlement.
If you are settling the WBSE to AUC with the periodic settlement refer to the OSS note 425601.
Regards,

Similar Messages

Reversal of Last Fiscal year asset in current fiscal year

Dear SAP experts
Asset has been booked in last fiscal year (jan2006) depreciation also posted till this fiscal year last month (2007 June)
Asset value-70000 (invoice value)
Accumulated Depreciation-33753.42
Asset net book value as on date- 36246.58
With same information one more asset also booked by mistake, so my client want to reverse any one of them asset with depreciation (which has booked in last fiscal year)
I tried with asset credit memo (T code ABGF); it is picking up only asset net book value (36246.58) not accumulated depreciation (which is already affected in Accumulated GL account).
Can you tell me is there any way to solve this problem

Hi Chaitanya,
If you have already acquired and depriciated the asset in previous fiscal year and closed the books and published the results why do you want to reverse it now. from accounting point of view also how would you show the entry for reversal of depriciation.
Any how the acqusition and depriciation posted in previous fiscal year can not be reversed in current fiscal year it can be reversed only in previous fiscal year. as per SAP standards you can write up the asset if you have wrongly depricaiated the asset.
Or else you can retire the asset with revenue which will give the same financial impact as you are expecting.
Thanks & Regards
Sree

Fund Center Z001 does not exist in FM area and fiscal year 20.01.2010

Dear Expert,
We have activated Funds Managment in quailty Client. but when ever we are trying to create PO below error message is coming:-
Fund Center Z001 does not exist in FM area and fiscal year 20.01.2010
Message No-F6580
Also when ever we are trying to post an FI document the same error message is coming.
Please advise with T-Code.
Regards,
Alok

Dear Mr Srinu,
The Z001 problem is solved by creating a fund centre using FMSA. Now while doing the shipment cost below error message is coming:-
1.Account Assinment to Commitment Item not supported with this GL account. Message no-ME032
2. No Funds center entered /derived in item 00010(1020/302401/)
Pl help,
Regards,
Alok

Excise Invoice Posting in Last Fiscal Year.

Hi,
Can excise invoice be posted in fiscal year 2011 for fiscal year 2010 if period of fiscal year 2010 & 2011 are open and number ranges have been not maintained for fiscal year 2011 but number ranges are available for fiscal year 2010?
Is there any system bug that excise invoice can not be posted for last fiscal year if number ranges are not available for current fiscal year?
Regards,
Suman.

Hi,
I clarifies my issue in more simpler way as follows.
I have heard that if we post excise invoice as posting date 31-03-2011 (For last fiscal year. Number range available) on 01-04-2011 (Current fiscal year. Number range not available) then system will not allow for posting for posting date 31.03.2011 as a system bug. System will allow posting for 31-03-2011 (For last fiscal year) if number ranges are available for current fiscal year ( For 01-04-2011).
Is it true ?
Regards,
Suman.

Last period last fiscal year

Hi Guru's,
I'm trying to make a report with the following key figures colums:
column 1: balance, restricted by fiscal year/month (with a variable, user entry), i have my own fiscal variant
column 2: balance, restricted by the last period last fiscal year (user exit)
<u>for example:</u> column 1 shows the values of period 005.2006, then automatically column 2 shows the period 012.2005
for column 2 i created a user exit variable ZVARLPLY, can anybody help me with the coding in the user exit? I already tried to use the variable "0P_BA102 --> ZP_BA102", but it didn't work. The error "Variable 0P_BA102 could not be replaced" will disappear when i check the input of the variables.
Can anyone help me?
Regards,
Pieter

Assign points if helpful!
You can use this logic and modify it accordingly
DATA: l_s_range TYPE rsr_s_rangesid,
      loc_var_range TYPE rrrangeexit,
      l_year TYPE n.
WHEN 'ZVARLPLY'.
    IF i_step = 2.
      LOOP AT i_t_var_range INTO loc_var_range
                   WHERE vnam = '<user entry variable>'.
          l_year = loc_var_range-low(4).          "Get year
          l_year = l_year - 1.
          l_s_range-low   = l_year + '012'.       "last year + '<last period of fiscal year>'
        l_s_range-high = loc_var_range-high.
        l_s_range-opt   = loc_var_range-opt.
        l_s_range-sign = loc_var_range-sign.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.

You have not maintained a rule for the fiscal year variant

1) I have Fiscal Year Variant in the Cube ( it got added along with fiscal year ) but there is no Fiscal year variant in the datasource & when I dont map it Transformation activation prompts error " You have not maintained a rule for the fiscal year variant ".
Can I just delete Fiscal year variant from the cube..does it matter?
2) Fiscal year & Posting Period can be populated from Fiscal Period, is the vice versa possible..? Does the sytem will take care of the conversion..?

1. no, you should not delete and you cannot delete fiscal year variant from cube, it's required by fiscal year/ period (compound infoobject), you should add it in your datasource, or you can map with a constant value e.g K4
2. yes, fiscal period can be populated by posting period
some info on time characteristic relationtionship
http://help.sap.com/saphelp_nw70/helpdata/en/44/be8b631c743959e10000000a1553f6/frameset.htm
hope this helps.

Commitment item 233000 does not exist in FM area ZK01, fiscal year 2009, an

Hi,
i am creating schedule agrement or 1 st april 2009 getting error
Commitment item 233000 does not exist in FM area ZK01, fiscal year 2009, and variant

Hi
Try
u can do one thing create commitemnt item for the year 2009. public sector management - Create commitmen titem
then u assign commitment item to GL in Fmderiver Transaction code
then u post
Reagards
Roobal

SES Cost not settling on REFURB Material in Refurbishment Process.

Hi Experts
I carried out a Refurbishment Process with Valuation Types. On the last part when i do a SES the cost of the SES is not settling to material wich has a valuation type REFURB.
For the above one i created a material code with 3 valuation type as New / Defect / Refurb. The cost of Defect was set to 0 and cost of REFURB was also set to 0. Should i do any changes while creating the REFURB Valuation type.
Can any one help me out....
Regards
Venkat.

hi
where the cost is settling to. whether any actual cost is there
also refer the following link
Doubt related to Refurbishment process
also refer http://www.scribd.com/doc/49382166/X72-Scen-Overview-EN-AU-Rotables-Management
regards
thyagarajan
Edited by: thyagarajan krishnamurthy on Jul 18, 2011 1:05 PM

Cost not settled

We have a entry made against a wbs element that will not be picked up when we try settling.
If we run a PS report for instance S_alr_87013542 it show's a debit on the code for a value, but its not picked up when settlement is run. The wbs has a settlement rule and other costs have settled fine.
Any suggestions on how to clear this value???

Hi,
Do you use network, if you use just check in S_ALR_87013542 that whether this cost is lying on WBS only or its on network activity.
If its on network then create settlement rule on the activity and settle the amount else check for the unsettled cost element and check your allocation structure.
Thanks
Saptak

Purchase order not appearing as commitment for next fiscal year in KOB2

Hi Experts
Any help on this is highly appreciated.Our Fiscal year 2008 is ending on 27th september and fiscal year 2009 will start on 28th September.
We have some purchase orders created with delivery date as 30th september which falls into next fiscal year. Somehow these purchase orders are not appearing as commitments in KOB2 report even with data ranges for next fiscal year.
However we have many similar Purchase orders with delivery date in fiscal year 2008 with same internal order as account assignment and they are correctly appearing as commitments in KOB2 report.
Can you please let us know what could be the reason for purchase orders with delivery date as 30th september not appearing in KOB2 report.
Regards,
Santosh

Hi Ashok
Thanks for your continued support on this. I was going through these notes today.
One observation I made was cost elements in our system were valid till 27th september only when problematic POs were created.However their validity was subsequently extended after the creation of Purchase orders.This might be the reason for system not recognising these POs as commitments.
SAP Note 534993 seems to suggest that we need to run report RKANBU01 for all such purchase orders to redetermine commitments.I am in the process of testing this out in our systems.
Could you please let me know if my understanding is correct. Thanks again.
Regards,
Santosh

Wrong posting to asset in last fiscal year

Hi Gurus
Posting was done on the wrong asset number x instead of y in the last financial year.
depreciaion is posted to the asset X for almost 11 months in the financial year 2011
please specify the options available to transfer the whole acquisition amount and the depreciation amount(book and tax dep) that is booked to the wrong asset X to the asset y.
the balance in asset number X after transferring will be 30K (NBV). these postings have happened prior to the year 2010
the wrong posting occurred in last janaury (fiscal year april to Mar)
thanks in advance
regards
sap student

Do an ABUMN using a gross transfer and all the posted depreciation in the sending asset will be shown up as value adjustment in the receiving asset and in the next year, you see this value adjustment in the accumulated depreciation bucket.

Cancellation of Subcontracting challan of last fiscal year

Hi Masters
I have an issue in cancellation of a Subcontracting challan which is created in March 2009(fiscal year 2008).Our user forget to cancel the challan in last month(April 2009).When they try to cancel now(May 2008),it shows the following error
"Return date is lapsed and reversal of modvat credit is pending"
How to solve this?
-Mohan

Hi Masters
I have an issue in cancellation of a Subcontracting challan which is created in March 2009(fiscal year 2008).Our user forget to cancel the challan in last month(April 2009).When they try to cancel now(May 2008),it shows the following error
"Return date is lapsed and reversal of modvat credit is pending"
How to solve this?
-Mohan

Funds center 000000 does not exist in FM area and fiscal year 15.06.2009

Hi Expert,
When I tried to cancel Invoice via MR8M, I get Error message "Funds center 000000 does not exist in FM area XXX and fiscal year 15.06.2009"
Please tell me what is wrong here.
Thank you.
Regards,
Henry

Hi,
That's the message from Funds Mangement component. You have to check whether the derived fund centre is the right one and if yes, create it via FMSA transaction.
Regards,
Eli

Internal order posted and settled to auc in incorrect ccode and fiscal year

Hi,
We created an internal order in ian ncorrect company code and settled the cost to AUC in previous fiscal year.
I would like to know what options do you recommend to move the AUC cost from incorrect company code to internal order in a correct company in the current fiscal year. Our AUC account is set up as control account and cannot be manually posted to.
I understand Internal order settlement to AUC for previous fiscal period cannot be reversed in the current year?.
Kindly advise
Umang

Hi
Select the Internal order > Reverse the settlement in the same year...(KO88)
Try to transfer the balance from this IO to new IO in the other co code from (F-02)..
You need to have Inter Co clearing accounts in the IMG....
now settle the new IO to new asset (AUC) in the other company
Br, Ajay M

Settle an AuC with investment support

Hello Gurus,
I have the following problem:
I have some AuC with investment support measure assigned.
If I settle the AuC created in prior-years the system settle the costs and the investment support to the final assets but If I try to settle an asset created this year, the system does not settle the investment support to the final asset.
I need that when the asset under construction is created and settled to a final asset (within the same year), the investment support iis posted to the final asset aswell.
Thanks alot for your help.
Christine

Normally settlement needs to be performed twice, if the investment support measure is there.
1) for Investment object to AUC ie WBS / IO to AUC. This called automatic /AUC settlement.
2) From AUC to Final Asset: This is called final / periodic settlement.
But both these settlement needs to be executed with KO88/ CJ88.

Cost not settled to AUC in last fiscal year

Similar Messages

Maybe you are looking for