Cost(vprs) of free goods with batch managment

Dear Gurus,
I have a problem ahout free goods with batch management.
Cost(VPRS) is not accumulated in billing(free goods is not relevant for billing).
My configurations are shown as below:
Ordered goods (and batch) item category :zta1(copied from tan)
Free goods (and batch) item category :zann (copied from tann) pricing:B ;not relevant for billing;dermination cost:X
copy control(from delivery to billing):
ztan: accumulation cost :X
If I use the material without batch management,Cost of free goods(without batch) is accumulated to main item(ordered goods).
So, what can I do?
Thanks and Best Regards,
Lykin Kan

Hi,
These notes are useful:
SAP Note 1365939 - VPRS logic and Customizing settings in SD
SAP Note 547570 - FAQ: VPRS in pricing
If you have the problem in the transfer from SD conditions to CO-PA, check if you transfer only invoices to COPA, if you don't invoice the deliveries of free goods, then you don't transfer this 'sales' or costs of 'gifts' to COPA. You can check the customizing of COPA in tcode ORKE (IMG for COPA). SAP Note 74486 - INFO: Overview of consulting notes for CO-PA is a good summary about this issue.
I hope this helps you
Regards,
Eduardo
PD: I forgot SAP Note Number 33968 SD/CO-PA: Characteristics from sales doc tables
Edited by: E_Hinojosa on Sep 10, 2010 9:44 AM

Similar Messages

Free Goods with Batch Management Activated !!!

Hi Gurus,
I have defined a free goods master data for material on which batch is activated. I have defined the it as with a min of 10 qty 1 free good will be delivered as exclusive item
Now as the batch management is active and each batch has 1 qty in it. Now in order to deliver 1 free good first i have to enter 10 line item of the same material and after the 11 th line system should generate 1 free good item. But this is not happening is there any standard configuration required for this process
Early reply will be awarded accordingly.
Thanks in advance
Edited by: Abaper Abaper on Jul 10, 2008 12:31 PM
Edited by: Abaper Abaper on Jul 10, 2008 12:32 PM

Hi Abaper,
Free Goods Determination follows the condition technique and hence you should have one condition type assigned to it one access sequence and then maintain the condition type (NA00) in a Free Goods Determination Procedure (NA0000).
Then assign this procedure to your permitted sales area and maintain the free goods determination master data (VBN1).
Also Check the settings of Item Category Assignment
It should be ORNORMFREE+TAN -
> TANN.
By this settings your free goods should work.
Reward if it helps you
Regards
Harsh

Free Goods (With Batch Management)

Hi Gurus,
I have defined a fee goods master data for material on which batch is activated. I have defined the it as with a min of 10 qty 1 free good will be delivered as exclusive item
Now as the batch management is active and each batch has 1 qty in it. Now in order delivery 1 free good first i have to enter 10 line item of the same material but after the 11 th line system should generate 1 free good item. But this is not happening is there any standard configuration required for this process
Early reply will be awarded accordingly.
Thanks in advance

Free goods is determined per sales order item. The system does not take the sum of more items. You have to insert the quantity on one item.
/Torben

VPRS with Free Goods and Batch Management

Dear Experts,
I have a problem on the products billing with Free Goods.
I will explain this, before the implementation of Batch Management (with batch split) the billing document show the condition VPRS on the main item (TAN) and the free goods item (TANN).
Now, when the Batch Management was up, the condition VPRS disappeared on the TANN item, I checked the order and it does shows the VPRS conditions. When i check the conditions on the billing document it shows me the following message when i check the VPRS condition
Condition ignored (requirement 004 not fulfilled)
Then I tried to debug the price determination and i realized that only on the TANN position the field komp-evrwr (price determination on the item category) is not 'X'.
Aditionally i can mention thar the batch split item category is defined as YG05.
Actually i only managed to show the cumulated VPRS cost on the main item.
Please someone say to me if this correct or there is a way to put the VPRS on the free goods item.
Javier Sandoval Vera
Ecuador

Hi Javier,
what do you do with the VPRS in your calculation- system ?
If you need i, you delete the requirement 004 in your calculation -system.
on the other hand, you can change TANN to komp-evrwr (price determination on the item category) is 'X'. Then you have to add an 100% rabate for TANN and the resukt will be free good.
Hans

BAPI_GOODSMVT_CREATE, will do the goods receipt ( MB01 )for the subcontracting PO with batch management.

Dear Professionals ,
I Just want to confirm that whether BAPI "BAPI_GOODSMVT_CREATE " will do the goods receipt ( MB01 ) for the subcontracting PO with batch management.
Since I will be passing only 101 mvy type in BAPi, will the system automatically call 543 mvt type with batch management and post the consumption.
can I change the batch of the component items ?

Hi ,
Delivery note is like a ref document number
so you can use the
In the BAPI_GOODSMVT_CREATE There is header structure BAPI2017_GM_HEAD_01 which has a field REF_DOC_NO
you can pass the delivery note value to that field .
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Jul 10, 2008 3:41 PM

Split valuation with batch management and project stock

Dear Gurus,
I need to combine two following requirements:
1. split valuation with batch management (valuation type = batch number)
2. project stock
These two functionalities work fine separately but not together.
I receipt PO for material with spiit valuation on a batch level into a project stock. Posting is OK and material document (MSEG table) seems to be OK (batch number, valuation type and project stock are in this table). The problem appears when I want to display material in this valuation type (MM03) or batch (MSC3n). They don't exist!!! Short investigation showed that during goods receipt table MBEW (valuated stock) was not updated with this valuation type.
But If PO is receipt into normal stock first and then posted into project stock everything is OK.
Have you had or heart about such issue? I would appreciate any sugestion.
Thsnks in advance.
Marcin Bernat

Hi,
As you already know ,u are using project stock and doing goods receipt against project, stock table QBEW will be updated and not MBEW. MBEW only updates in case of plant stock valuation. If u receive any goods against project stock it does not contribute to plant stock. Irrespective whether your material is managed in split valuation or not, If it is received against project stock it only updates QBEW. There is no need to update MBEW, if u r using split valuation in project. QBEW also have valuation type as another level like MBEW. If u want to see material price for project stock, it can be seen in QBEW -valuation type and not in mm03.
As u r receiving goods against project stock this is d only reason QBEW is updated and not MBEW.
QBEW will store all information like MBEW for batch number, valuation type and project stock assignment.
Hope it answers your question.
Deepak.

Free goods with other taxes

Dear SAP Gurus,
Can any one give me an idea to deal with the scenario of free goods PO if we have to pay octroi / freight / insurance etc and incase of imported material ,DVD, Customs charges, frignt and other handling charges,
please suggest me,

hi
For free goods with taxes make change in your pricing procedure make one negative condition of same value as pb00. so after calculating taxes and freight you can deduct the gross price . you you will be able to pay taxes but the cost of material will be zero.
suppose price of free good is 100
and tax is 12 % and freight 2%.
then
follow this.
1 gross price - 100
2 tax - 12 % of 1
3 freight 2 % of 1
4.add new condition
negative gross price - 100% of 1.
Regards,
Vijay

Free goods with materials having BOM

I have defined a free goods procedure and assigned it but get a warning message as below. It doesn't give free goods at the sales documents because the paid material has a BOM. How can I come over this problem and give free goods with the material including the ones with BOMs?
Thanks in advance.
Message no. V1684
Diagnosis
There are certain business transactions where it is not possible to
determine free goods in the SAP standard system: reason 3
Explanation of reasons
1      Document category is not from sales order category (VBTYP <> 'C')
2      Lower-level item
3      Bill of material
4      Product selection
5      Configurable item
6      Scheduling agreement/forecast delivery schedule
7      Item with active ingredient management
8      Item without schedule lines

hi,
Go thru this details
"Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: With material 1, material 2 and material 3 are free of charge or If material 1 and material 2 are ordered at the same time, then material 3 is free of charge.
Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
Free goods are only supported for sales orders with document category C (for example, not quotations).
Free goods are not supported for deliveries without reference to a sales order.
Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix."
chandu

MTS with batch management, serialization and Handling unit

Hello All,
I am testing a scenario for MTS with batch management, serialization and Handling unit for discrete manufacturing.
Everything worked fine till I created the Handling unit for the finished product.
The production order has a quantity of 3 EA.
It has three serial numbers 1, 2 and 3. (serial numbers can be displayed from order->Header->serial numbers)
I created one Handling unit for production order quantity of 3 EA.
I tried to do a goods receipt for the production order using transaction COWBHUWE.
I get the following error when I try to post the GR:
Only 0 serial numbers entered instead of 3
Message no. IO304
Diagnosis
There is a serial number obligation, so the number of serial numbers must equal the number of serial numbers in the material document.
You can post the operation only if you entered the correct number of serial numbers previously.
System Response
Depending on the context in which the error arises, the system continues processing, or the required function cannot be performed.
Procedure
You have the following options, for example:
Check that the serial numbers are entered fully.
If necessary, display an error log.
If necessary, contact your system administrator.
What did I miss?
How to fix this problem?
Please help.
Thanks in advance
George

I added the serialization procedure HUSL to the serial number profile and it fixed the problem.

SLED with Batch Management

HI Gurus,
We are using batch management for the material. At the time of goods receipt i am getting error
Shortfall of 100 days against remaining shelf life in current item (365 Day)
I have read some document and found that SLED calculate from the goods receipt document date with batch management. And i found the days difference error as follow.
For SLED of a batch calculates as follows:
SLED = total shelf life + production date from the goods receipt document.
Total shelf life is 365 day according to material master. 21.11.2012 Minas 365 remaing shelf life =13.11.2011
From November 2011 to todayu2019s date 21.02.2012. =100 days.
My question is : If system calculate SLED from the goods receipt (current date) for batch management. Then what is the use of enter manufacturing date in Goods Receipt.
And do i need to change manufacturing date to current date every time. even if material not manufactured in today's date (for example manuf in last month)
Please can any one help me to understand the scenario.
Thanks in Advance.
Ashish Panchal

Assume there is a joghurt.
it is produced on February 1 and has 30 days shelf life in material master, so he shelf life expiration date is March 2nd.
if you have a minimum remaining shelf life entered in your material master e.g. 5 days.
then system actls like this
If you receive this joghurt today (February 21) then you can receive without any error.
but if you want receive this joghurt on February 28, then you get the message "Shortfall of 3 days against remaining shelf life ..."
because your receipt date is withing the minimum remaining shelf life period.
this minimum remaining shelf life shall give you time enough to consume that material. otherwise it is expired before you start using it.
hence a minimum remaining shelf life must be much shorter than the total shelf life. an equal number makes it almost impossible to receive any good.

Ordered item to absorb the cost of the free goods

We have created an exclusive free goods agreement and we would like the ordered item to absorb the cost of the free goods. In order to transfer the correct information to CO-PA from SD billing, what should we do? Can anybody explain briefly?

Hi Yasar,
we do the setting for this in copy controls from delivery to billing.
pl go to t.code VTFL, select the item which is required to abasorb the cost.
there you will find a check box " cummulate cost ". Tick it here, this will make the cost of the free item to be transferred to the main item. This can also be used even incase of BOM's.
regards
sadhu kishore

Problem with batch management indicator

Hi Gurus,
I have an issue with batch management.
There is one material which was not batch managed. The requirement was to make it batch managed. There were no open purchase orders and the only thing pending was the stock in the present and previous periods. The stock quantity in the previous period and the present period matched(470 Kg). I opened the previous posting period, used movement type 551 and scrapped the stock. There was zero stock for the current period and the present period.
I changed the batch management indicator successfully. Now the issue is whil i am trying to cancel the material document
1. Now that the material is batch managed, whie trying to cancel the material document using MIGO, the system prompts for a batch to be entered. But the batch field is greyed out and i am not able to enter a batch
2. I have tried to cancel the material document using MBST and MIGO. The sytem prompts for a batch to be entered but not allowing me to do so as the batch field is greyed out.
Any pointers will be appreciated.
Many Thanks,
Sajin

Hi Sajin,
What is a reason to cancel a material document? When was that material document created? Before or after flagging the indicator in the material master?
Ilya.

Material with batch management

Hi gurús,
We have a material with Batch management for which already took place movements. Sales orders and lots have already been created.
It is posible removed the mark and use the material as non material with batch lot?
Thanks in advance for the help
Regards
Enzo

Please check:
http://help.sap.com/saphelp_47x200/helpdata/en/eb/650362e5a511d285ed0000e82013e8/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e59fd462a11d189000000e8323d3a/frameset.htm

Preference calculation with batch management

Hi experts,
I am trying to find any documentation or manuals about how to set-up and use preference calculation in SAP-SD-FT or GTS based on batch management.
Does anyone of you know how to do it and use such kind of "standard"-SAP-solution or is customer-specific programming essential.
Any reply would be much appreciated.
Best regards,
Corinne

Hi Corinne,
Did you get anything for your requirement specific to Preference calculation with batch management. I am also looking for the same. let me know if you found something useful or if you created an enhancement to resolve this issue.
Regards,
Sumit

Spilt valuation with batch management?

Gurus,
I want to activate split valuation with batch management..
i know the configuration of doing split valuation..
but, i need help on batch management configuration...

hi,
Why do you want both at the same time??
Either split val. or batch management independently can solve your issues...
Please let me know the reason...
For split valuation :
To select split valuation ('OMWC'), proceed as follows:
1. Determine the valuation categories and valuation types that are allowed for all valuation areas:
global valuation categories via menu "Goto --> Global Categories"
global valuation types via menu "Goto --> Global Types"
2. Allocate the valuation types to the valuation categories.
a) Select "Goto --> Global Categories".
b) Position the cursor on a valuation category and select
"Goto --> Global Categories --> Assignments --> 'Types->Category'".
c) Activate the valuation types you want.
3. Determine the local valuation categories for each valuation area.
a) Select "Goto --> Local definitions".
b) Position the cursor on a valuation area and select
"Goto --> Local Definitions --> Allocate Categoires->Org.units (button Cats->(OU)".
You obtain a list of the global valuation categories.
c) Activate the categories to be used in this valuation area.
The system creates the local valuation types based on the allocations under point 2.
Only now can you create a master record with split valuation.
Specifying Split Valuation by creating Material Subject to Split Valuation
1. Create a material master record, selecting the Accounting View 1.
2. Enter your data as required on the Accounting data screen, specifying a valuation category.
(If you can't find the valuation category field, it might be hidden, use OMSR to define the Field Groups.
Look for the field MBEW-BWTTY for Valuation category).
3. Be sure that the price control indicator is V for moving average price and enter a moving average price.
4. In the case of split valuation, you can create only one valuation header record with price control V because the
individual stock values are cumulated, and this total value is written to the valuation header record. This is where the
individual stocks of a material are managed cumulatively. To do this, fill in the Valuation category field on the accounting
screen when you create the material master record and leave the Valuation type field blank.
5. Save your data and the system creates the valuation header record.
6. The initial screen appears.
7. Extend the material by creating new material master records from the Accounting view 1. For the first material, specify a
valuation type in the Organizational Levels dialog box and enter the respective accounting data on the data screen.
Proceed likewise for the other materials, distinguishing between them by valuation type. To do this, call up the material in
creation mode again. Due to the fact that a valuation header record exists, the system requires you to enter a valuation
type for the valuation category.
8. Repeat step seven for every valuation type planned.
You want to valuate the stock of material XYZ that you obtain from manufacturer A in Los Angeles at a different price than the stock you obtain from manufacturer B in Detroit. In this case, the valuation category is H for origin. Your valuation types can be LOS ANGELES and DETROIT.
If a material is subject to split valuation, every quantity (sub-stock) of this material must be assigned to a valuation type (for example, country of origin).
For every valuation type, there are two types of data in the system, as follows:
Valuation data (for example, valuation price, total stock quantity, total stock value), which is defined for every valuation type at valuation-area level and applies to all dependent storage locations.
Stock data, which, like batch data, is managed separately for each storage location. If a material that is subject to split valuation is also subject to management in batches, its stock data is not managed by valuation type, but rather by batch. Every batch is assigned to a valuation type.
The stock quantity, stock value, and valuation price for all valuation types are managed cumulatively at valuation-area level
Regards
Priyanka.P

Cost(vprs) of free goods with batch managment

Similar Messages

Maybe you are looking for