Costing errors at the time of  creating and confirming production order

Hi friends,
I'm in the process of setting up a controlling activity called assembly of a product (this assembly is final assembly or would result in the finished product, JOTRUCK).
The Issue that I'm facing is, the system is not capturing costs.
i.e., it is allowing the creation and confirmation of production orders, however with a warning message which says costing errors.
Steps that I've completed (from controlling end):
1. defined primary cost elements
2. defined secondary cost elements with category 43.
3. defined a cost center.
4. In OKB9 I've assigned a couple of cost elements.
Please notify if there are any more steps that I need to configure for getting the right results.
If you have any material possibly with screen shots, pls do forward the same to: [email protected]
Regards
Kim

Hi,
I hope you have carried out the following activities:
1. Carry out standard cost estimate for the materials involved.
2. Check KKPAN to see the cost details of the product.
Need more details on the steps that you have carried out so far.
Regards,
SGP.
P.S - assign points incase the info was useful.

Similar Messages

  • VPRS Cost error at the time of billing

    Hi ,
    When iam creating billing document , system is throwing the below error message (WHEN IAM TRYING TO RELEASE TO ACCOUNTING SYSTEM SHOWING THE BELOW MESSAGE)
    {_"BALENCE IN TRANSACTION CURRENCY"_
    DIAGNOSIS - A BALENCE HAS OCCURED IN TRANSACTION CURRENCY ' INR ' WITH THE FOLLOWING DETAILS
    EXCHANGE RATE '00' AMOUNT  '3000 - ' AND CURRENCY KEY INR
    THE DATA IN THE TRANSACTION CURRENCY  WAS TRANSFERRED FROM THE CALLING APLLICATION
    SYSTEM RESPONSE - YOUR DATA CANNOT BE PROCESSED IN FI
    PROCEDURE - THE ERROR IS PROBABLY IN THE CALLING APPLICATION }
    BECAUSE OF THE ABOVE ERROR SYSTEM IS NOT ALLOWING THE BILLING DOCUMENT TO PASS TO ACCOUNTING
    IF I DOUBLE CLICK ON THE VPRS CONDITION AT ITEM LEVEL , THERE IS ONE FIELD  "CONTROL DATA"WITH LIST OF SUB CONDITIONS ... IN THAT CONDITIONS THE VALUE FOR "CONDITION CONTROL" FIELD  IS FLOWING AS
    "A - ADJUST FOR QUANTITY VARIANCE" INSTEAD OF "H-CONDITION VALUE FIXED(COST PRICE)"

    This question is posted quite frequently in this forum and many suggestions were also given.  Please make use of "Search" option b4 posting such repeated questions.
    Anyway, please find one such thread on the same topic
    [error in Balance in transaction currency   |error in Balance in transaction currency]
    thanks
    G. Lakshmipathi

  • Error when the time of create apllication in webdynpro abap

    hi,
      when i am trying to create apllication for webdynpro component it shows the error message like
    'you are not authorized to use transaction sicf '   in the status bar .  what is the problem and how can avoid this issue.

    Hi Babu,
    You are not authorized to use SICF tcode in development client. So try to create Webdynpro application in testing client where u have authorization for this tcode.
    Because whenever you create a webdynpro application, Internet Communication Framework (ICF) services for that application has to be maintained.since you are not authorized to access SICF it fails to do the same.
    For more information refer the below link
    [http://help.sap.com/saphelp_nw70/helpdata/en/46/d28dfa34bb12bee10000000a1553f7/content.htm|http://help.sap.com/saphelp_nw70/helpdata/en/46/d28dfa34bb12bee10000000a1553f7/content.htm]
    I hope this will help you.
    Regards,
    Rama

  • Error at the time of creating quote

    Dear Gurus,
    I am trying to create a quotation at that time I am getting the error message "date period 20071022 period  D is not valid" please help me on this.
    Thanks
    Hari

    Hi
    Please check the settings for 'Date Type' in the configuration of the sales document type QT (or your customised) in the Tcode VOV8.
    Ravi

  • Permission error at the time of creating search application

    When trying to create search service app in Sp2013 getting this permission error
    System.Data.SqlClient.SqlException (0x80131904): User does not have permission to perform this action. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
    stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean&
    dataReady) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream,
    Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion,
    Int32 timeout, Task& task, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
    at Microsoft.Office.Server.Data.SqlSession.ExecuteNonQuery(SqlCommand command) at Microsoft.Office.Server.Data.SqlDatabaseManager.GrantAccess(String user) at Microsoft.Office.Server.Search.Administration.SearchDatabase.GrantAccess(String username, String role)
    at Microsoft.Office.Server.Search.Administration.SearchDatabase.SynchronizeAccessRules(SearchServiceApplication searchApp) at Microsoft.Office.Server.Search.Administration.SearchServiceApplication.SynchronizeDatabases() at Microsoft.Office.Server.Search.Administration.SearchServiceApplication.Provision()
    at Microsoft.Office.Server.Search.Administration.SearchAdminUtils.UpdateIgnoreSPUpdatedConcurrencyException(String description, SearchAdminUtilsUpdateDelegate updateDelegate, SearchAdminUtilsRefreshObjectDelegate refreshObjectDelegate) at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.CreateSearchApp()
    at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.ProvisionSearchServiceApplication() at Microsoft.Office.Server.Search.Administration.SearchConfigurationJobDefinition.ExecuteTimerJob() ClientConnectionId:ca3ab460-7ca5-4493-961e-cdad7ed13465

    Hi,
    I understand you got permission error when creating Search Service Application in SharePoint 2013.
    Please verify that:
    1.The accounts that you use for the Search service, the Search Admin Web Service application pool, and the Search Query and Site Settings Web Service application pool must be registered as managed accounts in SharePoint Server 2013 so that they are available
    when you create the Search service application.
    2.The farm administrator account you used to create Search Service Administrator need to satisfy the following at least:
    in the SharePoint farm admin groups
    be a member of the local administrators group on each server in the SharePoint farm
    be assigned to the securityadmin and dbcreator SQL Server security roles
    http://aurramu.blogspot.com/2013/07/user-does-not-have-permission-to.html
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Error at the time of Release and Save the WBS

    Dear All,
          When i am going to release and save the project the below error has occurred.
    Error-Release not allowed as budget is not allocated to the project. Project will be exited and data changes will not be saved!
    But, i have budgeted the WBS and release the budget.
    Kindly suggest.
    Thanks,
    Asutosh

    Hello ,
    System status will allow you to release project. You are getting this due to user status.
    Your user status say initially 1 needs to change to say 2 so that you can release your project.
    This user status is defined in customization and assigned to your project profile.
    Regards
    Keshav

  • Automatic Batch determination at time of Goods receipt for production order

    Hi SAP experts,
                             Greetings to you all. I wish to ask a query that how batch is determined automatically at the time of goods receipt for production order .
                             I have done the following settings:
    1.Specified batch level at material level
    2.External batch number assignment
    3.Defined production order condition table '501' (plant/material)
    4.Defined production order access sequence (order type-plant -material)
    5.Defined Production Order Strategy type.
    6.Defined Batch search procedure in Production Order.
    7.Assigned Batch search procedure to Production order type for a particular plant  , batch check not activated.
    Please let me know of any more settings to be checked for the same.
    For example, a production order is being confirmed for a quatity of 5 nos . at a time . However, the GI movement (261 movement type) for the production order components  is taking place for 1 EA qty. from 5 different batches.
    So now, how the system will define the GR (movement type 101) for the production order header material for the qty. 5 nos. EA ?
    It is desired that the system should do GR for the qty.  1 EA of the header material for the 5 different batches (batches which were automatically deteremined for the Goods issue of the components).
    Thanks in advance. good day.
    Best regards,
    RB

    HI Rahul,
    As explained earlier, for e.g., if the GR is taking place for the production order for qty. 5 nos. , and in that , if the component qty. is 1 EA for 1EA of header material ; then , the GR for the header material should take place for the same different batches from which the order components were issued for the order and not for the other batches in stock for the header material as well as components.
    I am not sure if i understand your requirement 100%.
    But let me explain you standard behaviour.
    When Confirmation for production order happens and GR is posted during confirmation , All the GR happens agaist same batch number which i sassigned in production order assignment screen.
    So for all the order qty single batch would be fixed. Say batch A1 is created for Header material for 100 qty.
    Now during components issue to production order, If 100 qty needs to be issued for compoenent B it is possible to use multiple batches of componenets ( using splilt batch functionality /or manual batch number entry agaist componenet in goods movement screen) but header batch remains the same.
    Check and Revert,
    Santosh Sarda

  • Error in price at the time of creating SHC fro catalogue item

    Hi
    Cann anyone help me with the following problem.
    Error in price at the time of creating SHC fro catalogue item
    mentioned below article no. 0452202 then a pallet is to cost 3275,05 (you can only order min. 10 pallets).
    The system multiplies up the price by 10 & 10 and at that moment I transfer the shopping trolley it multiplies up again.
    The price for 10 pallets was gladly to be 32720,50 - Buttttttttttttt it turns into 3.272.050.
    Please help me in providing a solution for this
    Best Regards.
    sairam.

    Hi
    Please go through this ->
    Note 739562 Simplified pricing: Price 0.00 if catalog item.
    This is the standard system response as of EBP 3.5 Support Package 05 or Note 569275.
    This also depends on how you uploaded the price in the catalogs ->
    For price details you should use the following characteristics:-
    /ccm/price[1]#/ccm/amount /ccm/price[1]#/ccm/currency_code
    Perhaps you have to maintain field pricechangeable in BADi-InterfaceIF_EX_BBP_CATALOG_TRANSFER in method - ENRICH_ITEM_DATA. This will make sure you can edit the price_
    Other useful pointers ->
    Re: Price determination
    Re: free item shopping from catalogue....product with zero price
    OSS note 550071 - price for catalog product
    How to Upload Price details for a catalog in CCM 2.0
    Do let me know.
    Regards
    - Atul

  • Update termination error at the time of order creation and chamge?

    Dear gurus,
    Facing an error at the time of creation of order.
    system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
    please treat on priority
    regards,
    krai

    Hi,
    Goto ST22 T.Code and analyse the error.The error message why it is terminated will be displayed here.
    Or go to SBWP T.Code in the user where you got this error and check the inbox.
    It will display why the error is appearing.
    Show the same to the ABAPer and ask them to work on it.
    I think your server may be slow and it will take some time to update the order created by you.But I am not sure.Check the error message.
    Regards,
    Krishna.

  • Accounting document not created at the time of capture and post excise duty

    Hi
    Accounting document not created at the time of capture and post excise duty
    Please explain what the reason
    Regards,
    Channa

    reloved myself

  • Error at the time of Release of Cost Estimate

    Hi All,
    During the relase of Costing Run, we encountered with below error:
    Valuation data for material X190191302 is locked by the user SOOKKWANC
    Message no. M3024
    We are getting the same error at the time of CK24..also checked the log in of this user ID:SOOKKWANC but found that this user is not accessing any t-code.
    Please help.
    Thanks..
    Regards,
    Vivek

    Dear Vivek,
    When releasing same material might be used in another transction by another user
    At this point of time material gets locked
    Kindly un-lock ( Delete ) the entries in SM12
    Then proceed you issue will be solved
    Regards
    Madhu

  • Funds Mangement - Fund center derivation error at the time of PO/MIGO

    Hello -
    Generally ,If FM account assignements are available in purchase requisition , same should be carried to purchase order and to the good receipts. But I am getting an error at the time of PO or MIGO that " Fund center not derived'. Why this happening ? What can I do to avoid this problem. can I create a step in the derivation to keep the original FM assignments from the previous documents....is there something to do with field status??
    Thanks in Advance
    Chris

    Hi
    Please read carefully tye warehouse concept
    Excample warehouse concept II
    >At PR no FM update
    >At PO no FM update
    >AT GR no FM update
    >AT consumption on Cost center, WBS or Internal order FM is updated and AVC is checked
    Read the release note of ERP 6 or ERP5 the customising of Warehouse concept is well explained
    In sumary:
    Create a stock commitment item statistically
    Create a warehouse funds center
    Create a funds
    Create a derivation rule for warehouse concept 2
    Create a derivation rule where you have plant, valuation class and warehouse funds center
    Cretae a derivation rule fund>warehouse funds center>stock commitment item
    Go in customising integration to make field status for assignement FM account asignments
    Select PO and PR and make optional the funds, funds cenbter, commitment item
    And when you will create a PR or PO FM data will come automatically
    ciao
    Salvator
    PSM-FM Consultant
    BXL

  • Error at the time of Production order cancellation.

    Hi PP Gurus,
    The transactions happened when Sales order costing was activated
    1. Sales order created
    2. Production order creation, release
    3. Production order confirmation and QM lot created
    4. QM lot cleared with Result recording and UD has taken
    5. While doing PGI system started to ask about Sales order costing
    Now as per CO requirements all the documents has to be reversed and Sales order has to be deleted. But when I'm trying to cancel production order confirmation, it's giving error that Stock of Sales order quantity is deficit in Quality stock (As it is already moved to unrestricted Sales stock). And when we reversed it through Movement type 322 its giving error like UD has already taken for partial lot....
    We tried following options.
    1. Another Sales order irrelevant to Sales order costing created and we tried to move stock from old sales order to new sales order through movement type 413E but got the same Sales order costing error.
    2. We tried to move stock from old Sales order to unrestricted use, same error we got.
    As per my knowledge UD can't be reversed in Standard system.... What could be done in that case... Please help if some one faced the same situation.
    Thanks & Regards,
    Abu Arbab

    Dear,
    If you want to change UD code, it is very simple from QA12. But if you want to reverse goods movements also, it is some thing big process. please check OSS notes 175842.
    Please check SAP note note 33924 Reversing the UD and 175842-QM lot stock reversal.
    Please refer my reply in this thread also,
    UD cancellation or reverse after GR
    Please go through the transaction CO09, you enter your plant,Material, MRP area (Plant) and Checking rule then execute, it will take you to next screen there you can able to see what are the conformed quantities for the Sales document wise(Reservations), and also you can see the current stock possition (Cummiletive ATP Quantity).
    Regards,
    R.Brahmankar

  • Error at the time of Collective billing

    I am getting an error message "TE507_05    does not exist" at the time of create collective bill using Tcode "EA10_COLL"
    Please advice.
    Satya

    This means that you are missing configuration for CB document type in FICA. SPRO->Contract Accts receivable and payable->Basic functions->Postings and Documents->Document->Document types->Allocate number range groups for Nota Fiscal.
    Refer to IMG Documentation - You define the document types for collective bill creation. You can maintain the document types for clearing, interest calculation, and cash security deposit interest calculation documents, as well as bills from SD billing documents and debit entry documents.

  • Error at the time of MIRO

    Dear All,
      Error at the time of MIRO  while doing invoice for customs and the error showing as Tax code VO country IN does not exist in procedure ZAXINN
                   VO i maintained for Non Taxable transactions and Imports PO wont have any tax procedure as pricing procure is defined in MM Route only.
       Please suggest me why this error is comming
    Thanks,
    Tiru

    hi
    check u r tax code rates if ur using tax inj process
    or maintain rates in FV11
    Create a condition record by T.code FV11 for any of the condition record in your tax procedure TAXINN and check that tax code in header and line item should be same.
    Also use T.Code: OBBG and assign ur tax procedure with ur county code and save. Now try ur transaction.
    also check
    SPRO-LOGISTIC GENERAL - TAX ON GOODS MOVEMENT- INDIA - BASIC SETTINGS - DETERMINATION OF EXCISE DUTY - CONDITION BASED EXCISE DETERMINATION - ASSIGN TAX CODE TO COMPANY CODE.
    Check in SPro > materials Management > LIV > default values for tax code > give u r company code and try
    reward if helpful
    regards
    kunal

Maybe you are looking for