Could EPM add in for Microsoft 7.5 and EPM add in for Net Weaver 10.0 work together
Good day,
We are going to start a new project, where the client already has EPM add in for Microsoft 7.5. We need to migrate this system to EPM add in for Net Weaver 10.0. When we would testing systems we need to have on the one local PC 2 products :EPM add in for Microsoft 7.5 and EPM add in for Net Weaver 10.0 to compare results. Is it possible to use them parallel? Is there any SAP documents or official materials where is information about this situation.
Many Thanks for the answear!
Hi Natalia,
I have the same problem to migrate project, you can' t have both of them logged on at the same time
I solve my problem with a virtual machine, i use VMWare with BPC 7.5 version and host machine with BPC 10 Version.
I hope this will help you.
Regards,
Maycon Franco.
Similar Messages
-
I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!
The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying. -
Dear S&OP community,
I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
This what I did...
1) Created new attributes and master data objects and activated them successfully.
2) Time profile created and activated successfully
3) Trying to create planing area by assigning time profile in step 2 and assigned master data from step1..Unable to save the data and system returns
this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
My understanding is time profile needs to be active but doesn't have to have values...
Any help is appreciated.
Thanks,
KrishnaYS,
Here are my time profile settings
Level Name Display Horizon - Past Display Horizon - Future
1 Monthly -6 11
2 Quarterly -2 3
3 Yearly -1 2
Time profile is active and but time profile data is not loaded
Thanks,
Krishna -
When we go for Business content extraction and when we go for LO/COPA etc.e
Hi Dear Friends
When we go for Business content extraction and when we go for LO/COPA etc.extractions
Thanks
LearnerHi,
It depends on the KPI you are extracting for,if Business Content Extractor provides you with those then there is no need for generic extractors.
In CO-PA the KPI for profitability differs from client to client.You have Business Content for CO-PA also...
Cheers -
i buy iphone 4sfrom some friend that's he got it from his friend in canada and me set up software for it from Itunes and it asking now for apple ID that's i don't used it for download apps and me can't open my Iphone right now !! what i should do ?
It's not stolen ,that iphone came from canada to Egypt and me activeted it last night i got the acc from the owner
Thanks for Replay Mr -
I bought Lightroom 5 and installed it. I was asked for the Serial number and I entered it. But it does not work. Why?
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html -
I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?
Also, if you can't get them to work, what is the error message you are getting?
Baron Samedi -
I have a license for Creative Suite CS3 and bought an upgrade for CS5 a few years later. Would the original serial number for CS3 be the same for my CS5 version?
No... if you do not have CS3 installed, you will enter your CS3 serial number when asked for proof of a qualifying product... and then you will enter your different CS5 serial number... every version, new or upgrade, has a unique serial number
-
hi, i want to buy iphone 5s silver and iphone 5s gold both with T-mobile nano card. Is Iphone 5s unlocked? if i will bel for example in Ukraine and will use the ukrainian nano card will it work there?
Apple does not unlock iPhones. however, T-Mobile, where you live does offer official unlocking. So, contact them as to the cost/requirements.
-
I can't download service packs for microsoft office home and student 2011
I'm having difficulty downloading any service updates for Microsoft office 2011. Please send suggestions
Microsoft Tech support should be able to tell you what ports you may need to open on your firewall to enable downloading. http://www.microsoft.com/mac/
-
How can I get microsoft feeds for microsoft at home and at work newsletter?
I can't get the "microsoft at home and at work newsletter"
It keeps asking me to registerHi,
Firstly you need to install Software and drivers for your printer on your Windows 8 machine using the following file:
http://ftp.hp.com/pub/softlib/software12/COL30662/mp-110038-1/PS_AIO_02_Net_Full_Win_WW_140_408.exe
Microsoft Picture It is not compatible with Windows 8 therefore you can't use it anyway:
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Name=Microsof...
You can simply scan as jpg files and use them for other software.
Updated: I saw few of your posts for this same problem.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
My apps keep crashing and this has been happening for the past month and i don't it is the ipod is there and thing that I can do and I downloaded pictures and I can't delete them
Close all apps in the Task Bar. Double-click the Home button and hold apps in the Task Bar down for a second or two. Tap the minus sign to close app.
-
Re-assigning a retail license for Office 2010 Home and Student - any charge for support?
I want to re-assign one of three licenses for Office, but I went to the Support website, which prompted for the product ID and indicated that the "free support"period had expired, presumably because it is 12 months since I first installed it.
Can the reassignment be organised at the time of activating on the new computer by phone? Would a person be speaking with a human if doing a phone activation? Will there be a charge and what's it likely to cost?
I also have a suggestion for Microsoft: a de-activation routine that would enable the license transfer process without the need for human support.Hi
Normally Office for a retail version can only be activated once at a time in one computer, Office 2010 Home &Student can be installed on three machines.
If you have used up your activation times and want to transfer your Office to a new computer, contact Microsoft Customer Service and they will help you to activate your Office in a new machine:
http://support.microsoft.com/kb/295539/en-us
Tylor Wang
TechNet Community Support -
Min,Max for a time Range and Sum of Records for the last date/time
Hi All,
I have a table with the following structure/data:
create table Events (
[EventID]
int NOT NULL,
[Title]
nvarchar(200) NOT NULL,
[SourceName] nvarchar(20) NOT NULL,
[Type]
int NOT NULL,
[eDate]
datetime
insert into Events values(100, 'Event 1', 'S01', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S07', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S08', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S09', 3,'2014-01-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S010', 3,'2014-01-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S03', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S04', 3,'2014-01-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S05', 3,'2014-01-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S06', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S01', 3,'2014-02-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S02', 3,'2014-02-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S03', 3,'2014-02-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S04', 3,'2014-02-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S05', 3,'2014-02-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S06', 3,'2014-02-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S01', 3,'2014-03-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S02', 3,'2014-03-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S03', 3,'2014-03-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S04', 3,'2014-03-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S05', 3,'2014-03-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S06', 3,'2014-03-01 00:00:00.000')
And I wrote the following query:
select EventID as [Event ID],
Title,
count(distinct(SourceName)) as [Instances],
Type,
min(eDate) as [First Detected],
max(eDate) as [Last Detected],
datediff(d,min(eDate),max(eDate)) as [Delta (days)]
from Events
where type = 3
group by EventID, Title, Type
having max(eDate) <> min(eDate)
and max(eDate) =(select top 1 eDate from Events order by eDate desc)
and I get the following results (see the instance number)
Event ID Title Instances Type First Detected Last Detected
Delta (days)
=============================================================================================================================
100 Event 1 5 3 2014-01-01 00:00:00.000 2014-03-01 00:00:00.000
59
101 Event 2
3 3 2014-01-01 00:00:00.000 2014-03-01 00:00:00.000 59
102 Event 3
2 3 2014-01-01 00:00:00.000 2014-03-01 00:00:00.000 59
This is normal for this query however what I need to do is a little different.
In other words, while I need to show when we recorded a specific event first and last time,
I need to display the results for the last date/time when it was recorded.
For example what I need to provide should look like this:
Event ID Title Instances Type First Detected
Last Detected Delta (days)
=============================================================================================================================
100 Event 1 2 3
2014-01-01 00:00:00.000 2014-03-01 00:00:00.000 59
101 Event 2 2 3
2014-01-01 00:00:00.000 2014-03-01 00:00:00.000 59
102 Event 3
2 3 2014-01-01 00:00:00.000 2014-03-01 00:00:00.000
59
Could you please help me to fix this query?
TIA,
John;With cte As
(Select EventID as [Event ID],
Title,
SourceName,
Type,
min(eDate) Over(Partition By EventID, Title, Type) as [First Detected],
max(eDate) Over(Partition By EventID, Title, Type) as [Last Detected],
eDate,
datediff(d,min(eDate) Over(Partition By EventID, Title, Type),max(eDate) Over(Partition By EventID, Title, Type)) as [Delta (days)],
max(eDate) Over() As MaxEDate
from Events
where type = 3)
Select [Event ID],
Title,
COUNT(Distinct SourceName) As Instances,
Type,
[First Detected],
[Last Detected],
[Delta (days)]
From cte
Where eDate = MaxEDate And [First Detected] <> [Last Detected]
Group By [Event ID],
Title,
Type,
[First Detected],
[Last Detected],
[Delta (days)];
Tom
P.S. Thanks for providing the DDL and data. That is always very helpful. -
How do I unverify an alternate email for one Apple ID and then use it for another Apple ID?
So I need to use my email address for another Apple ID and when I enter it, it says that its already verified when I deleted it from my other Apple ID. Does anyone know how I unverify that email address???? Please help!!!
Hey, try these steps:
Go to My Apple ID.
Select Manage your Apple ID and sign in.
Scroll down to check if there are alternate and additional email addresses
Delete or remove those email addresses
Hope this helps.
Maybe you are looking for
-
I have rented two movies on my laptop and they will not completely download..it shows that they are theere but when i try to watch them on my laptop or my ipad it wont open up???? help
-
HT4623 How can I update iOS 5 on iPad 2?
I want to update iOS 5 on my iPad2 and I've read the article about it. There was written go in settings>general>software update in my ipad2 there isn't such button "Software Update" there is only "about" and "usage" so, what can I do?
-
Hello, I'm completely new to the mac world but I'm fed up with pc's and all the insanity with processor problems, viruses, etc. I'm seriously looking at replacing my HP laptop with the new MacBook Pro Retina 13 with 2.4GHz dual core i5 processor,
-
Bottom Part of 17" Trackpad not recognizing taps
When I put my finger on the bottom part of the trackpad and drag horizontally, the pointer on the screen doesn't move. While keeping my finger on the trackpad and then if I drag it up on the trackpad, the pointer will start to move. If I were to star
-
Table name for plant assign to costcenter
Dear Experts , Please tell me table name " plant assigned to cost center " display the list Thanks Bhaskar