Could not activate InfoObject (Runtime Error = UNCAUGHT_EXCEPTION)

Dear Experts,
I got stuck on activating an existing InfoObject-A after changing one attribute.
Situation
- there was no data in the InfoObject at all.
- change attribute from InfoObject-B1 to InfoObject-B2
- activate InfoObject-A
- got short dump
Short dump detail
- Runtime Error = UNCAUGHT_EXCEPTION (An exception that could not be caught occurred.)
- Except. =  CX_SY_SQL_ERROR
- What happened?
The exception 'CX_SY_SQL_ERROR' was raised but was not caught at any stage in the call hierarchy.
Since exceptions represent error situations, and since the system could not react adequately to this error, the current program, 'RSDRS_MSSQL_ROUTINES', had to be terminated.
Any suggestion for resolving this case would be appreciated.
Thank you very much.
-WJ-

Hi,
try to activate the infoobject with following program using transaction SE38:
RSDG_IOBJ_ACTIVATE
Hope you will get solution to your problem

Similar Messages

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • On a new setup I get error message "'could not activate this table (3001)''

    Hi,
    I am busy setting up my new playbook and get an error message on the software update screen: "'could not activate this table (3001)'' please try changing your settings.
    What settings am I meant to change?
    There is a button for settings and when I press this, the playbook takes me back to the connect to WI-FI screen. The WI-FI screen shows that I am currently connected. When I click on hotspot setup, the screen comes back and says I am already connected to the internet.
    Can anybody please assist me to complete my setup so that I can start using the playbook?
    Looking forward to your feedback
    Thanks a stax

    Or, you can find a local UNsecured hotspot not requiring a login or password. Like a McDonalds.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

    Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

    All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
    Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
    Message was edited by: modular747

  • IPHONE 5: can't receive calls & random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network."  This occurs even when signal strength or wifi is operational.

    IPHONE 5:  can't receive calls and random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network."  This occurs even when signal strength or wifi is operational, and it does not matter whether wifi is on or off.  ATT went through the standard protocol - resetting network, resetting sim card, etc.  No changes.  Other phones working fine in same region with same carrier.  Apple's solution is to restore software, but haven't gone there yet.  Anyone successfully addressed this/these issues?   

    I should point out that it worked when the iPhone was set back to factory settings, but when restored with the backup, data/internet no longer works again, and I get the "Could not activate cellular data network" error message yet again.

  • I am getting an error message "could not activate cellular data network" with my iPhone when there is no wifi

    I am getting an error message with my iPhone whenever I try to access my data with no wifi.  It says "could not activate cellular data network".  This just started today and has never happened before.  Did I change a setting or something?

    Hello, romac12. 
    Thank you for visiting Apple Support Communities. 
    I have experienced this issue before.  If there have been any changes to your cellular account such as adding a line, plan change or upgrade, more than likely there is a provisioning issue on the carrier end.  However, I would recommend going through the troubleshooting steps in the article below.  If the issue persists, see step 9. 
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    Jason H. 

  • HT4993 getting error message could not activate cellular data network when trying to access the internet without using wifi.  what do i need to do?  i have already restore the phone.

    getting error message could not activate cellular data network when trying to access the internet without using wifi.  what do i need to do?  i have already restore the phone.

    contact your phone carrier as they handle cellular network.

  • I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service"

    I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service", when I checked on my network settings i was not able to find the cellular data network tab ( where we use to input APN manually). i even tried to restore my iPhone to its factory settings, Still it remains the same. i cant able to connect to Internet using cellular data. help me...Plz..

    Where did you purchase it from?  There are lots of iPhones sold as "unlocked" which are carrier locked phones that were hacked and are not officially unlocked.  These phones are subject to re-locking to the original carrier, particularly when updated.

  • I Have a iPhone 4s and I keep getting this error "Could not activate cellular data network" I have sprint and to use any internet om my iphone i have to connect to wifi. What do i do to fix my celluar connection. I took my sim card and put it back in.

    I Have a iPhone 4s and I keep getting this error "Could not activate cellular data network" I have sprint and to use any internet om my iphone i have to connect to wifi. What do i do to fix my celluar connection. I took my sim card and put it back in and it still didnt work.

    Davidb24 wrote:
    Ok but im not the one who pays tge sprint bill
    Apparently, no one pays it... That's why they shut off your service.

  • Help w/-"Could not activate the Execution Code Console" Error

    I get "Could not activate the Execution Code Console (Cannot run an invalid object)" error, when running a package in SQL navigator. anyone know what this error is ?

    From the message in parenthesis, I believe that the package you are trying to run is invalid. Try to compile the package and execute the package again.

  • ERROR: Could not activate cellular data network: PDP authentication failure

    I have an iPhone 3g that was given to me by a friend a couple months ago. Before I got the phone i was on a plan with Softbank in japan with another cell phone. When i got the iphone i unlocked it so that i could use my old sim card with the iphone. everything worked out fine, i was unable to use the internet via 3g since it wasnt on my plan but i could text and make calls with no problem.
    Everything was working fine until yesterday when i started getting this error message: "Could not activate cellular data network: PDP authentication failure"
    once this happened i could no longer text or make calls. my iphone recognizes the sim card, shows one bar of signal, the network, and the 3g symbol. i have also rebooted, restored, reset network settings, and talked with Softbank; all had no help.
    i have no idea how to fix it, any suggestions would be awesome.
    thanks.

    All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
    Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
    Message was edited by: modular747

  • Why I face the error could note activate cellular date network

    I have IPhone since three months, I bought it from Egypt and each time I lose the network signal then I catch it back I can't browse or use Internet at all ad I see error " could not activate cellular data network" even I didn't go abroad how can I fix that

    Go to Settings > General > Network > Cellular Data should be "ON"

  • My iPad2 has error message "Could not activate cellular data network : PDP authentication failure"

    My iPad2 has error message "Could not activate cellular data network : PDP authentication failure"

    All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
    Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
    Message was edited by: modular747

  • Could not activate cellular data network error

    i bought ipad 2 few days back. while i'm trying to connect to 3G i'm getting the pop up saying "could not activate cellular data network".. can anyone help?

    If you have the sim version (AT&T in the US), did you purchase a sim card from your carrier, insert it and buy data?  If you have CDMA version (Verizon in the US), have you contacted your carrier to set up a data plan?

  • HT4623 my ipad could not activate because the activation server could not be reached. tried to connect to itunes error about network was rese. how to fix?

    ipad could not activate because activation center could not be reached .  I plugged to itunes then something bout my network connection was reset

    Authentication servers are ALSO slammed right now.
    Give it some time.   
    download servers VS. authentication servers 

Maybe you are looking for

  • Different Drive Structure Between Principal and Mirror

    We havea 2-node (active/active) cluster with four failover instances installed. We use a dedicated drive for data files, one for log files and one for tempdb per instance .Predicting that we will be adding more instances in the future, we realized th

  • Compliants from Inbox result list are not opening

    Hi all,      when i click on compliants from inbox search result ,   compliants are not opening.    tasks, and interaction records are opening properly. plz suggest ram

  • Help pliz

    Problem: I have 2 mail and name @ me.com name @ me.com. I stopped using name @ yandex.ru, how to remove it from the profile? sorry for the clumsy English ( <Emails Edited by Host>

  • WARNING: No FormBeanConfig found under 'CustomerOpen'?

    Hi all! I am using Struts 1.2.8 with the following excerpt in my struts-config.xml: <action path="/CustomerOpen"      type="com.brunata.servicerapport.CustomerOpenAction"      name="CustomerOpen"      scope="request"      input="CustomerInfo.page" va

  • Issue of Credit Limit as per Sales

    Dear All I have the requirement from the user the Credit Limit should be updated as per the Sales. Suppose this month Customer Invoicing is being done for 10 lakh,then its credit limit should automatically get  updated to 20 lakh, If invoicing is bei